The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It's good to have a human readable domain again.
Change-Id: If773e28a267b635a94a45b07fba9a32d62d0c248
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Use provided configuration file via --disk-map option
instead of creating bdevs and VMs in ordered sequence
(e.g. 0 to 10, etc.).
This allows to:
- specify which NVMe device we want to use
(PCI BDF identifier)
- how to name it in SPDK nvme bdev configuration
- how many splits or lvol bdevs to create on this device
- which VMs should use created bdevs
With CPU mask configuration file this allows to better
control resources when running the test (especially in
case of NUMA optimization where using sequential for/while
loops is not a good approach).
vm_count and max_disks parameters removed. These are not
needed anymore as they're controlled by config file.
Example of config file contents:
(BDF,Spdk NvmeBdev name,Split count,VM list)
0000:1b:00.0,Nvme1,2,2 3
0000:89:00.0,Nvme3,4,4 5 6 7
Change-Id: I9fc73458825d8072537aa04880765a048e034ce4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464565
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2045: Iterating over ls output is fragile. Use globs.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I436878774d6f86c23b1c5cf5220da297053f03e2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Vhost nightly test fails on Error: Partition have been written, but
we have been unable to inform the kernel of the change, probably
because it/they are in use.
Closes#1090
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iafd051e02b3dd32ede8a62c69c7079a0facade0c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476639
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This also requires us to change the create_test_list function to rely on
the run_test function for creating the canonical test list.
Change-Id: Ib35e7752935a3ac83de2702b6dfbd42539027f6a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476962
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In patch fdc82d3 'vm_run $@' was changed to 'vm_run "$@"' but
arguments like 'vm_run "0 1"' should be passed as
'vm_run 0 1'.
Change-Id: I2a51a31fc0b0b55079963b11587be55d9bf86a87
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Met error "touch: cannot touch './timing.txt': No such file or
directory" when running vhost_test.sh. For the working directory
is removed in "vhost_kill 0", And then "timing_exit clean_vhost"
will fail to touch timing.txt in the removed directory.
Signed-off-by: richael zhuang <richael.zhuang@arm.com>
Change-Id: I2d0818b1228ebfd6767c258a0f4c1fbbfc728016
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We will be able to distinguish case and suite in the post process
scripts based on if they have any internal tests.
Change-Id: Iff2aa5caa251924d8a842085d87eb2a17aca45d4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This test suite was doing some things as far as formatting that are
covered by the run_test framework. Also, the way the tet cases were
organized was obfuscating which migration tests are actually being run
in the autotest jobs. This configuration makes it a lot easier to
manage.
As a side note, migration-tc3a.sh and migration-tc3b are not referenced
anywhere in the test scripts. They may be extraneous.
Change-Id: Ibe6782b38cb87c90b2bc61f112f10cd35f5b4a44
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
apparently getopt used $i when iterating over variables because when
weuse --force and don't set i ourselves, bash throws errors that look
like "line 594: [[: --test-cases=1,2: attempted assignment to
non-variable (error token is "=1,2")".
Change-Id: I89937f1cdd3d3c0557c931a11707df17c7b8d87e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The shell_Restore_x variable and xtrace_restore were attempting to
accomplish the exact same thing. However, when assigning
shell_restore_x, if -x was not set, then the assignment would result in
an error causing the scripts to fail.
So just get rid of that variable entirely and replace it with the more
robust xtrace_disable, xtrace_restore mechanism.
Change-Id: Ic823ad8433bd3dc181aaa0930297cd9d74bcf528
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477966
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Use env variables to select custom qemu-img and qemu-system-x86_64
binaries. This is needed to test versus latest Qemu versions from
Github.
If env variable QEMU_BIN is not present then the defaults for test
are system-wide installed packages.
This partly reverts changes done in patch:
5502294d76
which removed possibility to run with custom Qemu binaries.
Change-Id: I8138a079ba7013dcd97aad95ae2eed6417f5b18c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477776
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
And clean out the corresponding calls to timing_enter and timing_exit
from the various test scripts.
Change-Id: I0759417b5a529e4c3649ce04cca1799c089da278
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This will allow us to use timing_enter and timing_exit directly
inside the run_test function. That function already lends itself well to
nesting the way we do our timing.
This patch series is aimed at combining the timing_*, run_test, and
report_test_completions calls all into a single place. This will greatly
reduce the number of lines of code in our bash scripts devoted to
tracking timing, formatting, and test completion. It will also enable us
to expand on the reporting of test completions. Further down the line,
this will also allow us to unify test case documentation.
Change-Id: I8e1f4bcea86b2c3b88cc6e42339c57dfce4d58f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
fio.sh script is never used for vhost performance testing.
There are separate test scripts created just for this purpose.
Change-Id: I55e9b8c0d53100d1ce8077cf1758590bbe971dee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Correct shellcheck rule SC2012: Use find instead of ls to better handle non-alphanumeric filenames
Change-Id: Ibfc54ac06ae4cecadd22954159d259295f99912f
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Edited config file is loaded in test via rpc.py
load_config. Because of that, each parameter is
sent "as-is" from config file, as opposed to using
rpc.py bdev_create_raid which would cause argparse to
convert all params to desired type.
Commit 445e667 changed raid_level to enum while this
config file still used int which caused nightly tests
to fail.
Change-Id: I729c7263261c73e255ab2e6071f76219a351cb19
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473565
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Correct shellcheck rule SC2140: Word is on the form "A"B"C"
(B indicated). Did you mean "ABC" or "A\"B\"C"?
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1655b2e76be7a5e3d615c5b34c5af9e4012ac49f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Corrected code in some files.
Most of cases cannot be corrected as we use global variables
defined in other files.
SC2154: var is referenced but not assigned.
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Change-Id: Id333587f81b0bc2456b0c97bac5343a8e5a22774
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2124: Assigning an array to a string!
Assign as array, or use * instead of @ to concatenate.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Id74c55b7e1c41b6469e84ac388cf8a5bd8e562a6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473276
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We tried to change all of these when updating the RPC
names, but there were some that were missed apparently.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b27d658bb039f201ca003b1d9005e7cfa8c45c2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473340
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Do not run gen_nvme.sh and do not automatically create
nvme bdev configuration.
Allows more control over Nvme/bdev configuration when
running performance tests.
Change-Id: I9ef139921efbcc5d92d3a55c05aace929c6284e7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464564
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Add possibility to measure CPU utilization on host server
while running FIO tests.
Change-Id: Ibc76c2b1469974297350388880a036d8778e4713
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix: removed vhost_dir assigment in places where it is not needed.
Change-Id: Idd120099d8c5d28901437e13b5670209f7536568
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472603
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reinstating "shift" removed in commit a2ab5eb as it was actually
needed.
Change "cmd" command string to use $@ instead of $2 so that we're
able to use more than one additional param for vhost instance.
Change-Id: If656c4319d7acfecddd2ff73104d3c79b799689f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2115: Use "${var:?}" to
ensure this never expands to /* .
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I4a6beef338b7a3c496f1b74a0cdbbdff83403ddc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Correct shellcheck rule SC2145: Argument mixes string and
array. Use * or separate argument.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I45102ead2e97cc1d6b11c21f269e58a235055c35
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470926
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Correct shellcheck rule SC2043: This loop will only ever
run once for a constant value. Did you perhaps mean to
loop over dir/*, $var or $(cmd)?"
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If8de0a81ea889a04b8fea646fedc0a2cfe49d5f7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470737
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Patch b6af628 while addressing Shellcheck 2088,
broke the pathing to integrity_vm.sh within VM.
Originally tilde was used within quotes so it didn't expand,
since cmd was executed as root the path was correct on VM.
After the change the path was changed to $HOME, making it
actually expand on the host system (not VM). Path was made
incorrect.
Since we already scp to /root/, it shouldn't
be an issue to use that path in explicitly when executing.
This fixes recent nightly run failures.
Change-Id: I2e0ac767cbf77a71841db260e602b568b1f510a1
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Variable was used as an array but is now assigned a string.
Change-Id: I79e59d80be96657a9c2fc66f9d205458f9db67b2
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Check exit code directly with e.g. 'if mycmd;',
not indirectly with $?.
Rule disabled in test/pmem/common.sh as behaviour
may differ depends on bash version
Change-Id: Ied4c5dfb09e52c5db08becf1ad69a29a1bda426b
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This was changed recently to enable a shell coding style checker, but $*
does not represent the number of arguments supplied to the function,
rather it is an alternative version of $@ that stores all arguments in a
single string. So we should be checking against an empty string and not
0.
By checking against 0, every time we passed 0 into vm_wait_for_boot, we
tried booting every vm in that directory. This causes errors on nightly
tests and intermittent failures during per-patch testing.
Change-Id: I1850ea73ea59fdc244de1a91e4c6de1b4505e518
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Correct shellcheck rule SC2088: Tilde does not expand in quotes. Use $HOME.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iea1eeaafc414c153f60634aaa39b0ab3272c9c48
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>