Inline function that is only called once.
Fix == bashism.
Create the filesystems on the partition created by parted rather than on
the raw namespace block device.
Add 'sync' invocations to make sure data gets flushed to the block
device we are testing.
Drop the copy-pasted FIO cleanup code (filesystem test does not run
FIO).
Change-Id: Id47d68db208a618841291c4184824031476268f1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Multiple NVMe controllers within a subsystem does not work correctly,
since we would need to virtualize the controller data, namespace IDs,
and so on. For now, only allow pass-through mapping of a single NVMe
controller per subsystem.
Change-Id: Ib2d3576d2856c46a086f38eb6bec56f3e7a73575
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we used cap_lo and cap_hi to represent the 32-bit halves of
the full CAP register. However, it is simpler to keep them in a single
64-bit structure, and is no less efficient on 64-bit platforms.
Also name the NSSRS field from NVMe 1.2, which was previously reserved.
Change-Id: I1d5d9b0dccbb12373b4aed3db29c883881d43223
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the path to the executable shorter so it fits in the coredump.
Change-Id: I651c6cb4bd37fea51dd8e39b47a97c4edeace22f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure the reactor mask in profile take effect.
Change-Id: Ia471b2b88a711f05738cf93068c4f3a8c9a3039d
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
There is a sporadic error mounting ext4. Enable
tracing to attempt and catch it.
Change-Id: I8cb8425cbd076add0676064fccce66fdd4531b19
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
4420 is the officially assigned IP port from IANA for NVMe over Fabrics.
Change-Id: I433a5ed0780d1ffd7ca6512617759d59fa5e8def
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMe over Fabrics defines its own NVMe Qualified Name (NQN) format; it
does not use iSCSI Qualified Names.
Also change the default node base for nvmf_tgt to "nqn.2016-06.io.spdk".
Change-Id: I2b73c1426ef1d8c83cc2df499d79228ea61257cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will allow removal notifications to be propagated to the library
user (e.g. for hotplug).
The callback is currently unused, but this at least prepares the API for
the future hotplug support.
Based on a patch by Dave Jiang <dave.jiang@intel.com>
Change-Id: I20b1c2dbf5e084e0b45a7e51205aba4514ee9a95
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the knowledge that both the source and destination of
nvme_copy_command() are aligned to emit the aligned variants of the
SSE2/AVX mov instructions.
Change-Id: I0a7e32a3bb10b9a1920cd85691b79fa7172eecb3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Match the expected alignment for nvme_alloc_request() and nvme_malloc()
to allow optimized memory copy code to work even in the unit tests.
Change-Id: I546692a6df9615a12a8209618fb6159a9c9e426b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also finish up the req_state -> req conversion.
Change-Id: I131dd52dcd36a790b942e06f0207a3274cc04ffc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fabric commands were skipping a step, so unify all
types of requests through the same completion path.
Change-Id: I5f38a7e1cdcdf33baf71486d5ddae9f5a6157fac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This moves some definitions from nvmf_spec.h to
nvme_spec.h based on the latest publication.
Change-Id: I51b0abd16f7d034696239894aea5089f8ac70c40
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It is always set to nvmf_process_async_completion and is only used
within the library.
Also rename nvmf_process_async_completion to spdk_nvmf_request_complete
to clarify its purpose.
Change-Id: Ie737fb60688329bfe329a8553c4a40ff2e5f8f1d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Everything necessary for processing an admin command is now stored in
nvmf_request.
Change-Id: I74e75a5b7bb3b406ad167c2b31cab1af7a1f270a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Everything necessary for processing an I/O is now stored in
nvmf_request.
Change-Id: I3f390707ebe83ea66a116dcfda4d0388a6823629
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Simplify the build rules so that common libraries are always linked.
Also fix up a couple of -lpciaccess instances that should have been
changed to $(PCIACCESS_LIB).
Change-Id: I4c50fa3aa59cae013d3385e38fbb830794299f6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
vtophys() was checking for out-of-range addresses incorrectly: vfn_2mb
is already shifted to account for 2 MB hugepages, but it was being
compared with a mask that did not account for the shift. This would
allow out-of-bounds access to the 128tb map array for certain invalid
addresses (it had no effect on addresses within the valid userspace
range).
Change-Id: Ida7455595e586494c9025f9ba65d050abb16b1b9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Work around an issue with the mlx4 driver.
Make discovery of NICs more generic.
Change-Id: I9701d8d7937faa299d12d7ca4bfe1c923983c263
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This enables SPDK_NVMF_BUILD_ETC to be moved out of the library as well,
since only authfile was using it before
Change-Id: I10d1145881f9a0358d7effe2d2d9851899413e1b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The section is really defining a subsystem as defined
by the NVMf specification. There does not appear to be
any need for a group of subsystems.
This change only updates the configuration file. It does
not remove all references to a subsystem group from
the code.
Change-Id: I38e62735a5ac924dcafacb3c9a332a103d751d4a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The specification refers to this concept as a Host,
so use that term. This only changes the configuration
file usage. Initiator groups are still referenced in
the code and will be removed later.
Change-Id: I897f4dbdfb65d94da1e5a77434fc07a2c18bcdc2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Put the common funcs in test/nvmf/common.sh to
reduce duplicated code
Change-Id: I1c72f6fb22d092dafb7fb134b8bb3780b5525e48
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Gang Cao <gang.cao@intel.com>
The index should be 0 for fabricintf.
Moreover, when there is no fabricintf found, error should
be returned
Change-Id: I3aa04566a5a318b8c921dd37c8573ed075254266
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
NVMe opcodes contain a two-bit field that encodes the expected data
direction for each command. Add an enum and a function to extract these
bits.
Change-Id: Ie214319f121cf0899c6aa5663866f2988b128dd2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use SPDK_CU_ASSERT_FATAL instead of CU_ASSERT_FATAL so static analyzers
recognize that g_request cannot be NULL in the following lines.
Change-Id: Ie7ab3bd34a177bea0d565441014e8db12be8bb01
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If spdk_json_number_to_int32() works correctly, it will initialize the
value of i32, but since this is a unit test, we should make sure i32 is
initialized to catch bugs.
Fixes a clang warning during scan-build.
Change-Id: Iecf0531d2992acf584b10e2de5f8c53553a9f3b6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The D3700/D3600 series support Controller Memory Buffer(CMB) feature,
CMB is available for holding submission queues, for those controllers
which can support submission queues in CMB, user can set the option
whether to enable it or not.
Change-Id: I8b0dc9e28dd6f5bb01bee99a532087212c04e492
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
When recursively calling spdk_json_write_val() on another object or
array, the child call will handle printing out the whole
subobject/array, so the parent call should skip over all of its values.
Also fix the return value for the array/object case - if we get to the
end of the array or object, we should return 0 for success.
Change-Id: I1da80c88ab8759620114c1ab141baaaaf9f0023a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Resolve relative paths before using them to clean up command lines.
This should also help shorten the overall command line length that gets
embedded in the binary and used when locating the executable from a
coredump.
Change-Id: Ibff9849ede198bb04313496c8b7131485ffaf14f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix copy of uninitialized data in the unit tests.
Change-Id: Ib71a6fc90edb07f7ddac3067ff0efbda7938bf17
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch add support for Intel specific log pages :
marketing description page.
Change-Id: I87bccb2af286279598c9dd3c870094b384a0d2f7
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
For those controllers which can support end-to-end data protection
feature, add the support in the driver layer.
Change-Id: Ifac3dd89dec9860773c850416a6116113a6ce22a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Rename nvme_remove_child_request() to nvme_request_remove_child() and
move it next to nvme_request_add_child() to make the symmetry clear.
Change-Id: I78747c44ab3db1a656b33555a45f634dc5a55b31
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can happen if the controller is still resetting as the SPDK NVMe
driver takes control.
Change-Id: I263ae8f2e7b271e0448450557452a115c90c4fb6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to add a nvme_request remove child
helpler function
Change-Id: I1e5bb228d53333ca3601f4ae30fcd801ea39e532
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The next_sge callback can be called multiple times for a single I/O if
the I/O is split. Get the physical address for each element once
instead of every time the SGL is walked.
Also bake the SGL element offset into the physical address.
Change-Id: I5d83426a234ffe9d13b89621077dbbb1561181c9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also use uint32_t consistently for counting SGL elements.
Change-Id: Ibeffffdc5e0eccd11681703cd333bfb64319e164
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows us to test elements with particular (mis-)alignments without
depending on the internal behavior of the DPDK allocator.
Change-Id: I006358b82ae3a677353333954ba88d1bcfe289f6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There's no reason to use the system-defined iovec structure; we only use
it for our internal scatter-gather callbacks. Define our own structure
so it can be extended.
Change-Id: Ifc055adfdae8cddd53e7f5d638a24f1e812b1ac6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This helps identify which iteration of the test failed.
Change-Id: I9186de08ea8217348b8ee61b0ecba4e9d7ab986e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the controller is failed, attempting to submit additional I/O is
futile - it will be immediately failed using the completion callback,
which can result in infinite recursion if the application code resubmits
I/Os on failure.
Instead, provide a way for request submission to indicate failure, and
use it to exit early if the controller is failed; this can only happen
when a reset failed (timed out).
If a request is submitted directly by the user when the controller has
failed, we can return an error code directly. For the case where I/O
was queued and is being resubmitted after a reset, we still need to call
the completion handler via _nvme_fail_request_ctrlr_failed().
Change-Id: I9e144328d524b25db2acf48e923b584746e8d0b6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This test is only intended to validate functionality, not actual
performance, so one second is plenty.
Change-Id: I2ff198c035226b50a113f9ff189c1abbd0fd1c17
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Provide a new structure, spdk_nvme_ctrlr_opts, to let the user modify
the default controller initialization options during probe/attach.
Currently, only the number of queue pairs can be modified in this way;
other options will be added later.
Change-Id: Ie27b9429291d93a9353c0d820f0ad467d3b0e7cb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace the previous code that allocated each tracker individually with
one large allocation per queue pair.
struct nvme_tracker is now explicitly padded to reach exactly 4096 bytes
to allow normal array indexing to work correctly while maintaining the
alignment requirement that ensures each tracker's PRP list does not
cross a page boundary.
This also allows removal of the act_tr array, since the tr array can be
indexed directly now, and each tracker can store its own active state.
Change-Id: Ia7c51735b96594d12f7f478cefcc4aedc84207ad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The previous method for registering I/O queues did not allow the user
to specify queue priority for weighted round robin arbitration, and it
limited the application to one queue per controller per thread.
Change the API to require explicit allocation of each queue for each
controller using the new function spdk_nvme_ctrlr_alloc_io_qpair().
Each function that submits a command on an I/O queue now takes an
explicit qpair parameter rather than implicitly using the thread-local
queue.
This also allows the application to allocate different numbers of
threads per controller; previously, the number of queues was capped at
the smallest value supported by any attached controller.
Weighted round robin arbitration is not supported yet; additional
changes to the controller startup process are required to enable
alternate arbitration methods.
Change-Id: Ia33be1050a6953bc5a3cca9284aefcd95b01116e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This field is write-only in the current code; the NVMe library does
not track timeouts on requests.
Change-Id: I50e53bb3c299bf16912c48be8aad3eec829154af
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When I/O spans a stripe boundary, the driver splits the request into
multiple requests, so for 1 segment memory larger than the stripe
size, we also need to split the segment memory.
Change-Id: I22ea5734d7066865a57a3c90fe18d5f76f373f1d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Remove the common code that was factored out to spdk.common.mk.
Change-Id: I2a6265fa144b2c03f3484e2aa528fd1e15d13429
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add CUnit test case to verify payload_offset value in split_test4
Change-Id: I4a9a33854295ed802709bbe4f11746d284ed8cbd
Signed-off-by: Liang Yan <liangx.yan@intel.com>
Add test case which verify invalid second phys_addr would cause
_nvme_fail_request_bad_vtophys be called.
Change-Id: Id1b62e249b7192e29334bd7cab33815722f5662d
Signed-off-by: Liang Yan <liangx.yan@intel.com>
For those NVMe controllers which can support SGL feature in
firmware, we will use SGL for scattered payloads.
Change-Id: If688e6494ed62e8cba1d55fc6372c6e162cc09c3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
This will be exposed in the public API. This rename is in a separate
commit to ease review.
Change-Id: I1b7fef36f85265db27935ac4d22ceef3c7282502
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Many of the internal controller initialization functions did not check
for allocation failure; add return codes and check them where
applicable.
Change-Id: Id1b33bb06fca84035369d8b7ecd4c36b8ba7134c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function returns true if the namespace is active or false if it is
inactive (e.g. no namespace has been attached to the specified namespace
ID yet).
Also use the new function to add checks in the examples and tests where
applicable.
Change-Id: I35465b315ae1a1677c5a82191ad9b1da1c216d50
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Prepare for qpair to be exposed as part of the public API.
Change-Id: Ia63e863e95554adceeade20c829f12fe346375d5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Store each namespace's associated controller in its ns_entry structure
rather than trying to assign them during associate_workers_with_ns().
Change-Id: I679a1902d5c787e35f3afb5292342ce369f1fe52
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When multiple NVMe controllers are being initialized during
spdk_nvme_probe(), we can overlap the hardware resets of all controllers
to improve startup time.
Rewrite the initialization sequence as a polling function,
nvme_ctrlr_process_init(), that maintains a per-controller state machine
to determine which initialization step is underway. Each step also has
a timeout to ensure the process will terminate if the hardware is hung.
Currently, only the hardware reset (toggling of CC.EN and waiting for
CSTS.RDY) is done in parallel; the rest of initialization is done
sequentially in nvme_ctrlr_start() as before. These steps could also be
parallelized in a similar framework if measurements indicate that they
take a significant amount of time.
Change-Id: I02ce5863f1b5c13ad65ccd8be571085528d98bd5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Two test cases should be added.
1. ns cmd don't have child requests;
2. Assert that the correct number of child requests are created
and verify that each one has the correct payload_offset.
Change-Id: I1182a1a6673ceaf2ba35be268f80d8668af82848
Signed-off-by: Liang Yan <liangx.yan@intel.com>
This fixes a memory leak in the unit test.
Change-Id: Ie94459e8e46e966c437ad43702a04f1a8f9becdb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
PCI_VENDOR_ID_INTEL -> SPDK_PCI_VID_INTEL
Also change the inclusion guard macro to be consistent with the other
SPDK headers.
Change-Id: I29346267172cb8c07cc4289eed4eca2d55e942d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename all functions with a spdk_ prefix, and provide enough of an API
to avoid apps needing to #include <pciaccess.h>.
The opaque type used in the public API for a PCI device is now
struct spdk_pci_device *.
Change-Id: I1e7a09bbc5328c624bec8cf5c8a69ab0ea8e8254
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Similar to the NVMe API change, this allows better abstraction of the
PCI subsystem.
Change-Id: I2b84d9c3c498a08d4451b4ff27d0865f0456c210
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
With CONFIG_PCIACCESS=y in CONFIG file, we can
use libpciaccess library; With CONFIG_PCIACCESS=n
in CONFIG file, we use pciaccess functions provided
in DPDK.
Change-Id: I786c5589b8e7909ba2e59d222938dd5ba45bf92d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The new probing API will find all NVMe devices on the system and ask the
caller whether to attach to each one. The caller will then receive a
callback once each controller has finished initializing and has been
attached to the driver.
This will enable cleanup of the PCI abstraction layer (enabling us to
use DPDK PCI functionality) as well as allowing future work on parallel
NVMe controller startup and PCIe hotplug support.
Change-Id: I3cdde7bfab0bc0bea1993dd549b9b0e8d36db9be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds Intel NVMe device list and overrides the
supported log pages according to the quirk list.
In particular, the READ_CMD_LATENCY and WRITE_CMD_LATENCY pages are
supported on Intel DC P3x00 devices despite not being listed in the
Intel vendor-specific log page directory.
Change-Id: I3a2b6a5fa142c6e9c93567df65e85980bd3c7cc0
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Also add a space between Copyright and (c).
The copyright year can be determined using git metadata.
Also remove the duplicated "All rights reserved." - every instance of
this line already has a corresponding "All rights reserved" immediately
below it, except for examples/ioat/kperf/kmod/dma_perf.c, where I have
added it manually.
Performed using this command:
git ls-files | xargs sed -i -e 's/Copyright(c) \(.*\) Intel Corporation. All rights reserved./Copyright (c) Intel Corporation./'
Change-Id: I3779f404966800709024eb1eb66a50068af2716c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Add new API nvme_ctrlr_is_feature_supported().
2 Add unit test for new API.
Change-Id: Ia6d8710755c3b13984fca9d56700efe043be1402
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This cleans up the I/O splitting code somewhat.
It also moves the SGL payload function pointers up into the hot cache
section of struct nvme_request without pushing the other important
members past the cacheline boundary (because payload is now a union).
Change-Id: I14a5c24f579d57bb84d845147d03aa53bb4bb209
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Support for the Force Unit Access and Limited Retry
bits on reads and writes.
Change-Id: I9860848358377d63a967a4ba6ee9c061faf284d4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
NVMe reservations provide capabilities that may be used by two or more
hosts to coordinate access to a shared namespace, here we add the 4
reservation commands: reservation register/acquire/release/report.
Change-Id: Ib03ae2120a57dd14aa64311a6ffeb39fda73018c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This patch is used to remove unnessary pci_device
related parameter
Change-Id: I8869307f49364797543c88ffa9c456da34d1487d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
For the purpose to support different types of input scattered payloads,
such as iovs or scattered list, we define common method in the NVMe
driver, users should implement their own functions to iterate each
segment memory.
Change-Id: Id2765747296a66997518281af0db04888ffc4b53
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Request allocation may fail, so we need a way to indicate failure to the
caller.
Change-Id: I278c3f42e4d2fa1902bb0ab33ad3bf7c7007fd0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Add supported log pages data structure.
2 Bulid up supported log pages when NVME start.
3 Provide unified API for getting log pages.
3 Unit test suit optimization base on above modification.
Change-Id: I03cdb93f5c94e6897510d7f19bc7d9f4e70f9222
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This more accurately represents what function it performs.
Also remove pci_device_has_uio_driver() from the public API. Callers
should use pci_device_has_non_uio_driver() instead.
Change-Id: I9623fe1345b43e981d5823804e33d01ac0d3bb1c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_process_io_completions() and
nvme_ctrlr_process_admin_completions() now return the number of
completions processed.
This also adds the possibility of returning an error from the
process_*_completions functions (currently unused, but this at least
gets the API ready in case error conditions are added later).
Change-Id: I1b32ee4f2f3c1c474d646fa2d6b8b7bbb769785f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure allocation succeed in the unit tests.
Change-Id: I1c9dd64c256d529f2e40be49448d56359969a6f5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The normal CU_ASSERT_FATAL macro calls a function that is not marked as
noreturn, so static analyzers (e.g. scan-buid) can't figure out that
fatal asserts are really fatal.
Add a wrapper macro that calls abort(), which the analyzer can determine
does not return.
Change-Id: I0c087bf9c8d3c272bf88120caa70e87dab6d9546
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If any command fails during the asynchronous event request test, exit
the test with an error rather than waiting for an event that won't
arrive.
Change-Id: I7297afe362bfdac04dd6585cc97ffdceb9f0096e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The top-level autotest.sh script will catch any core dumps at the end of
the test run, so sprinkling process_core in the individual test scripts
is unnecessary.
Also make the per-component test scripts run with 'set -e' (exit on
error).
Change-Id: I85f124e164ca93d35eaf672a428a841c119c550b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The deallocate command's num_ranges have changed to unit16_t.
Update the nvme_ns_cmd_deallocate unit test for the change.
Change-Id: I43b8637bbb953b0e56c39998e1e6682a54304a8f
Signed-off-by: Liang Yan <liangx.yan@intel.com>
nvme_qpair_submit_tracker() and nvme_qpair_manual_complete_request() are
only used from within nvme_qpair.c, so they can be static.
nvme_qpair_submit_tracker() is moved up to avoid needing a declaration
(no other code change).
nvme_ctrlr_hw_reset() is only used from within nvme_ctrlr.c, so it can
be static.
Change-Id: I9a7953d7baaec76e875dd535daf557ea24bef801
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The ioat driver supports DMA engine copy offload hardware available on
Intel Xeon platforms.
Change-Id: Ida0b17b25816576948ddb1b0443587e0f09574d4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use $(CLEAN_C) throughout the Makefiles to clean up a consistent set of
generated files.
This also adds coverage files to the list of cleaned files.
Change-Id: Iceb922935a45c9eecbf2f3443bd0ee4f5c966825
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Most devices today support far fewer than 1024, but this is a
more reasonable default upper limit than the spec-defined 64K.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia8a6d80c3a5aa181f27c8354758c6ca468013d92
The .o files are always kept anyway, so there is no need for an explicit
rule.
Change-Id: Id1687ba89daabfda5802e4328deb127403277928
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add common $(COMPILE_C), $(LINK_C), and $(LIB_C) variables that contain
the commands to build a .o from a .c, an app from objects and libraries,
and a library from objects, respectively.
Change-Id: Ie2eaa13156b8bf3db7a4ffa66161382d829aef07
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the standard pattern of OBJS automatically generated from C_SRCS,
and also link against libspdk_memory instead of including the object
file directly.
Change-Id: I0c8cd8996cde2bcc1f25d9d97811fff3b0bbc88b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_process_io_completions() now takes a second parameter,
max_completions, to let the user limit the number of I/Os completed on
each poll.
If there are many I/Os waiting to be completed, the
nvme_ctrlr_process_io_completions() function could run for a long time
before returning control to the user, so the max_completions parameter
lets the user have more control of latency.
Change-Id: I3173059d94ec1cc5dbb636fc0ffd3dc09f3bfe4b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, the I/O splitting code and child I/O completion were not
being tested (aside from in the unit tests).
Tweak the I/O size so that it will get split into two child I/Os on
devices with 128 KB striping.
This causes nvme_cb_complete_child() to be exercised, improving code
coverage.
Change-Id: Ia0299f7f809f8edb93452b5ad45939977a9f67f1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Set SPDK_ROOT_DIR explicitly in each Makefile so that make from a
subdirectory will work (assuming all dependencies from the upper
directory have already been built). This allows partial rebuilds of the
source tree, as well as building the unit tests without requiring DPDK.
Change-Id: I3f65b805d490b40ff5ec53cceb61df542ce814f1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This catches functions with empty parameter lists, which are not the
same as void parameter lists in C, as well as other (less-likely)
K&R-style parameter lists.
Change-Id: I18b09e01a60b3669d1cc5d8d96eec20cd872c497
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This helps weed out functions that should be static, functions that are
not declared in public header files, and .c files that don't include
their .h interface headers.
Change-Id: Ie39f83ad4b320847e4a938bd1d4d0b4fa21c2ffa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace {0} initializers with {}, since it is equivalent and simpler
(and avoids the warning).
Change-Id: Id2014a352e2c627598cd3b4f1ca04dba35f2dc3a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix all of the uses of __thread so they are at the beginning (similar to
e.g. static).
Don't actually enable -Wold-style-declaration, since clang doesn't
understand that.
Change-Id: I0dcbb758143eab90fc978334c8f256c6602cc4cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename the nvme_free_request macro to nvme_dealloc_request to match
nvme_alloc_request and add a wrapper function to nvme.c so that the
macro contents are only expanded once.
The DPDK nvme_impl.h uses rte_mempool_put(), which generates a large
amount of code inline. Moving this macro expansion to a wrapper
function avoids inlining it in the multiple places nvme_free_request()
gets called, most of which are error handling cases that are not in the
hot I/O path.
Change-Id: I64ea9c39ba47e26672eee8d5058f1489e07eee5b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The I/O splitting tests don't pass the I/Os through the normal
completion path, so we need to free the children ourselves.
Fixes all Valgrind warnings for nvme_ns_cmd_ut.
Change-Id: Iaf7d9f7f4cab71428a0123ee30d0f6042001e423
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ut is testing multi-threaded operations, and Valgrind's thread
behavior is different than running the program natively. Under
Valgrind, the unit test essentially hangs waiting for the global
variable to be updated.
Change-Id: Id3665002c16ac3e695c50325375305a76f72cee4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_alloc_request() does not zero out the request (this is
intentional, since the real implementation uses a mempool where requests
get reused). Add nvme_allocate_request() wrapper that initializes the
request correctly. This fixes all uses of uninitialized memory caught
by Valgrind in nvme_qpair_ut. This test was also failing in practice on
FreeBSD due to non-zero buffers returned from malloc().
Change-Id: I2d6ea29289bd4887aaa9120fba6bce10088e6917
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The default version of nvme_impl.h was cleaned up to release the pthread
mutex attr on failure cases, but the unit test version did not receive
this update.
Change-Id: I899b7dc809393dc8e6fd24ed98e1d0a61ecf1c95
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Check the LBA and block count fields of the I/Os generated by the
splitting function to ensure they were split correctly.
Change-Id: I84abb1ac462fb7423d51a1be384fd1be68dfecae
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of repeating the check for conditions that must be fulfilled to
continue the tests, just use CU_ASSERT_FATAL, which will abort the test
and return.
Change-Id: If617b286a587d9efb1ce57b90061634ed5bc7ae8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The current implementation of nvme_assert in the unit test nvme_impl.h
just prints the message and continues.
We should not be triggering assert conditions, even in the unit test
code, so make nvme_assert actually call assert(). This lets us catch
mistakes in the unit tests more easily.
Also fix the two unit tests that currently trigger an assert:
- The I/O splitting test in nvme_ns_cmd_ut was passing an invalid
combination of NULL payload with non-zero lba_count.
- The ctrlr_cmd test was passing an invalid number of entries to
nvme_ctrlr_cmd_get_error_page(). This case should probably not be an
assert but rather an error code. However, the function does not
return a status code currently, so it is not trivial to make that
change. For now, just drop the asserting test case and the code added
to the test to work around it.
While we're here, fix the macros in the unit test nvme_impl.h so they
are usable in single-line conditionals without braces - that is the
whole point of the do { ... } while (0) pattern, so there should be no
trailing semicolon.
Change-Id: Iad503c5c5d19a426d48c80d9a7d6da12ff2c982a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Cover more functions and conditions for nvme_ctrlr_cmd.
Remove unnecessary lines in nvme_ctrlr_ut.
Update nvme_qpair_ut.
Remove unnecessary header file.
Change-Id: I8c5a75573b26210ca57711b366acd55ab96614c0
Signed-off-by: Liang Yan <liangx.yan@intel.com>
Move dependency includes into a new spdk.deps.mk file,
then include it at the end of Makefiles that build
source files.
Also add a test to autobuild.sh to confirm that
binaries are regenerated if we make after touching a
header file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If6a1905706a840f92cbdf3ace7fbdb27fe2de213
Initialize the full nvme_namespace structure in prepare_for_test() so
that e.g. ns->id is not used uninitialized.
Also check for request allocation failure - if the request is NULL, we
can't run the rest of the tests that dereference request without
crashing.
Change-Id: I3010ca3e81f153a4d0201498a14a963c2b9e960d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This helps enable FreeBSD, where pciaccess pci_device_has_kernel_driver()
is not functional. The function will return 0 if there is no driver
attached, or the Linux uio or FreeBSD nic_uio driver is attached. It will
return 1 otherwise.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0921e61c9040b1e0411b5dc40b36fc7f2721c8c5
GCC generates a series of 64-bit MOV instructions for the memcpy() into
the submission queue. We can do better with 128-bit SSE2 instructions.
DPDK already has a memcpy implementation that is optimized for small
inline copies, so use it instead of memcpy.
Change-Id: I5f09259b4d5cb089ace4a8ea6d2078c03fee84f3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use {} consistently rather than {0} when initializing structs as part of
definitions.
Fixes warnings about initializing subobjects when compiling with clang.
Change-Id: I507fdf47e7c41455033d6c3d5edc563ec4667dee
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_cmd_set_async_event_config() is called from within nvme_ctrlr
but was never stubbed out in its unit test.
Change-Id: I44002540e74ee010f21d0cf2d089d1dc51217a2f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prevents warnings about unused phys_addr variable in the unit
tests.
Change-Id: I022483735ba92eb112e541e6de37dc9a8c5d2b8e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace unnecessary allocation with a stack variable.
Clears up a potential NULL pointer dereference indicated by scan-build.
Change-Id: I81a7591729b0f1630bab9ce378716bd2369d6b85
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
act_tr is supposed to be allocated with the system allocator
(malloc/calloc) rather than nvme_malloc.
Additionally, the size was incorrect - act_tr is an array of pointers,
not a single struct nvme_tracker.
Change-Id: I2c66b4891d11d0a8a32e3740c27fcfb42b1db2d7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_dump_command is totally unused aside from the unit test.
nvme_dump_completion was used in qpair, but it can be replaced with the
equivalent nvme_qpair_print_completion.
Also added the missing nvme_completion fields to nvme_qpair_print_completion
that had been printed by nvme_dump_command.
Change-Id: Ia5ee66f3553df06febe8f465d42e49a84c555dd2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make nvme_pcicfg_read32 set the referenced variable and make
nvme_pcicfg_write32 appear to read it so that the compiler doesn't warn
about unused/uninitialized data.
Change-Id: I4f06c0cca2fc11a8c6c5a60543c1c50a2f6a412d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace a bunch of allocations with stack variables.
Remove many unnecessary variables.
The actual tests are unchanged (and still not testing very much), but
this removes a lot of cruft that should make it easier to see what the
tests are actually doing.
Change-Id: I2c4810391cbf4d8edde88d5bc1c0dddcba3ae175
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
