Also we don't treat exceptions when getting INTEL log pages
as a fatal error, the initialization will still contine.
Change-Id: Ic2fd2be510fde2679c1546482934d0a180266936
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10341
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When NVMe passthru command (IO or admin) fails on submission (e.g. it
is not supported), set DNR bit in completion status field. There is no
sense in retrying the command in this case.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I55960c128bd9fc31f6defef0b9832259a71684b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8578
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If NVMe admin passthru command is not supported by underlying bdev,
set status code in NVMe completion to INVALID_OPCODE.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I29c4e1f8263b76b27c199cfd2d9b2474432ec70b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10517
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The originally detected problem is that SPDK NVMf target fails command
with invalid opcode with status code INTERNAL_DEVICE_ERROR instead of
INVALID_OPCODE. All unknown commands on IO queue are passed to
underlying block device layer as NVME_IO type. It is not checked if
this type of commands is supported and, when command fails,
INTERNAL_DEVICE_ERROR is set as status code. If command fails on
submission, status code is set to INVALID_OPCODE which is more
relevant.
This patch adds check if command type is supported to
bdev_nvme_*_passthru functions. If not supported, it is failed with
ENOTSUP.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I4d7f7639da17dd3b1dc3eee7eb1b4a4f876117a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Move the CONFIGURE_AER state before SET_KEEP_ALIVE to
make sure that we run the CONFIGURE_AER state for
discovery controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia4e24f6507c43e3fece06b9161ff8e0b8fa0e97d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the following patches, we want to retry reconnect if reconnect failed
in a reset ctrlr sequence but we want to delay the retry. While
we wait the delayed retry, we want to quiesce ctrlr completely.
As part of quiesce ctrlr operations, we want to pause adminq poller but
we need to do it on the nvme_ctrlr->thread.
If a reset ctrlr sequence runs on the nvme_ctrlr->thread, we can avoid
redirecting the pending destruct request at completion too.
So we redirect the reset ctrlr sequence into the nvme_ctrlr->thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I538b962e2a7b5cf00ebbac2a1e888482ddeeee61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Discovery services using the SPDK nvme driver may
use long-lasting connections that detect AER completions
to determine when there are changes in the discovery
log. This means that we still need to send keep alives
on discovery controller admin queues. So move the
SET_KEEP_ALIVE_TIMEOUT state immediately after
IDENTIFY, and run the SET_KEEP_ALIVE_TIMEOUT state
even for discovery controllers.
Note, we need the IDENTIFY's KAS value to properly
set the keep alive timeout, so we have to keep the
IDENTIFY state before SET_KEEP_ALIVE_TIMEOUT.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c6403c28fb72d42629c5f9009a89c4bfd44d162
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10329
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the following patches, bdev_nvme_reset() will execute the reset ctrlr
operation on the nvme_ctrlr->thread until completion as bdev_nvme_admin_passthru()
does. Hence change the callback bdev_nvme_reset_io_continue() to
redirect to the orig_thread by using bio. Furthermore, use bio->cpl.cdw0
to store the completion status of the reset processing. bdev_nvme_reset()
does not use bio->cpl.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I361cc44494190ba83ad6e360788d78851416c46c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10074
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch supports admin passthrough retry when we get any error
with DNR=0 but ABORTED_BY_REQUEST up to retry_count times.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1bf29570791fdbe8651fa70c4c8685bb740fb86b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9944
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When resetting ctrlr, adminq is disconnected first. If adminq is disconnected,
admin passthrough request is rejected with -ENXIO.
But resetting ctrlr may succeed. If resetting ctrlr succeeds, adminq is
connected again, and admin passthrough request will be
submitted successfully.
On the other hand, if ctrlr is failed, admin passthrough request is
rejected with -ENXIO. But when resetting ctrlr, ctrlr is set to unfailed.
Hence bdev_nvme_admin_passthru() skips any ctrlr which is resetting
or failed, and calls bdev_nvme_admin_passthru_complete() with -ENXIO
if no available ctrlr is found.
bdev_nvme_admin_passthru_complete() queues admin passthrough request
and retry it one second later if ctrlr is resetting.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic748dc4faf29ebf717ae5c29dcf7c55fe2ea9243
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9942
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For DSM command, the NVMe drive may take a long time to finish it,
if we set a small timeout value for DSM command, the bdev/nvme module
will try to reset the IO queue pair when timeout happens,
in `spdk_nvme_ctrlr_free_io_qpair`, we will abort the outstanding
IO requests first, then in the `nvme_pcie_ctrlr_delete_io_qpair`,
we will poll the CQ for any requests that have been completed by
the NVMe controller, if there are NVMe completions in the CQ,
we will finish them again, thus double completions happened.
Here we rename `nvme_qpair_abort_reqs` to `nvme_qpair_abort_all_queued_reqs`,
so the common layer will just abort queued request, and let each
transport to abort outstanding requests case by case.
Fix#2233.
Change-Id: Icae6214239160c615418cb514fc51cfe77b59211
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NOTICELOGs really clutter the output during
application start - it's better to make these DEBUGLOGs
instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ae37d5d057d7b972017befbc0834de414b9710b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The NVMe bdev module queues retried I/Os itself now.
bdev_nvme_abort() needs to check and abort the target I/O if it
is queued for retry.
This change will cover admin passthrough requests too because they
will be queued on the same thread as their callers and the public
API spdk_bdev_reset() requires to be submitted on the same thread
as the target I/O or admin passthrough requests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If37e8188bd3875805cef436437439220698124b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9913
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The recent changes merged multiple Data-OUT PDUs within the same
sequence into a single subtask up to 64KB.
However, they were not enough.
For a large write operation, the hardware iSCSI HBA host sent an immediate
data whose size was not block size multiples and then more solicit
data through R2T exchanges.
One example for a 64KB write operation was as follows:
host sent SCSI Write with 5792 bytes and F = 1
target replied a R2T
host sent Data-OUT with 15880 bytes
host sent Data-OUT with 11536 bytes
host sent Data-OUT with 2848 bytes
host sent Data-OUT with 11536 bytes
host sent Data-OUT with 5744 bytes
host sent Data-OUT with 12200 bytes and F = 1
The hardware iSCSI HBA host can decide the size of the unsolicited data
but the SPDK iSCSI target can require the host to send the solicited data
whose size is block size multiples.
Hence we merge immediate data to the following R2T data if the immediate
data is not more than 64KB and more R2T data come.
Add another test case to check if the fix works for the above example.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4906b4e1a8b61e08862f4ccc27a6caf165126530
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was sometimes used as the maximum array index and sometimes as the
maximum count. Make it consistent everywhere and give it a better name.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I518efd99a7d36584624490b0b3497bb6e81ce9ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10101
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After multipath feature is supported, one bdev will have more than one
nvme ctrlr. Fore ease of view, display each ctrlr's trid info.
Moreover, rename nvme_bdev_ctrlr_get as nvme_bdev_ctrlr_get_by_name here
to keep consistent with nvme_ctrlr_get_by_name.
Signed-off-by: Kai Li <lik271@chinatelecom.cn>
Change-Id: I417506699bbea6ed13dac0fee942749757d2ae47
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10129
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the bdev-zone API, there are a few functions that takes a zone_id:
spdk_bdev_get_zone_info(), spdk_bdev_zone_management(), and the
spdk_bdev_zone_append() functions.
The way a zoned application is usually written is that it starts off
by getting the zone report for all zones (zone_id will be sent in as 0),
and then the application will keep the whole zone report in memory.
Therefore, an application usually have access to the zone_id/zslba for
all zones. However, there are cases, e.g. when getting an error on write,
where the completion callback will only have the lba of the write that
failed.
Add a helper function that can be used to get the zone_id/slba for a
given lba. Having this helper in bdev-zone will avoid SPDK applications
needing to provide their own implementation for this.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I978335f87f7d49bc33aed81afcaa6d9f0af8a1e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When data segment size is 64KB and data digest is enabled, if
data segment and data digest are split into different two packets,
- pdu->mobj[0] became full first when reading data semgment,
- pdu->mobj[1] was allocated but unused and data digest was read.
In this case, two SCSI write tasks were submitted by mistake and
the second SCSI write task had no data.
Fix the bug in this patch.
When iscsi_pdu_payload_read() is called and pdu->mobj[0] is full,
allocate pdu->mobj[1] only if any of data segment remains to read.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9a0c36c05f90092c3c2122a7eb91e10976830b40
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9965
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This meant to zero the entire active namespace list.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2da2293b53acd57d3480cf93b052eb1520de35d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10028
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
verify_io() keeps track of a buf pointer, but the
buf pointer never actually gets used. So remove
this buf pointer.
Found by clang-13.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79dfeac7f004b56f7d4404f41b2ff18b96968a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10056
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If I/O got ANA error, ANA state may be out of date. So in this case
read ANA log page and update ANA states. Mark nvme_ns to be updating
to avoid using while updating ANA state.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia43d38b3a589c84d6d0479dedcced033e76fb194
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If an I/O failed by ANA error, the corresponding ANA state might be
out of date. In the following patches, for this case, read the latest
ANA log page and update the ANA state. Such reading ANA log page may be
done on multiple threads concurrently including AER ANA change.
Hence protect ANA log page by adding an new flag ana_log_page_updating
to struct nvme_ctrlr and using it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8bb84091d50a5fdc0d9893b585be972dfd31c0f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9526
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add bdev_retry_count to spdk_bdev_nvme_opts and retry_count to
nvme_bdev_io, respectively.
Set type of both to int because we want use -1 for infinite retry.
Set the default value of bdev_retry_count to zero for the backward
compatibility.
bdev_retry_count is configurable by the RPC bdev_nvme_set_options.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9bc746fcea54aa8722c76f79c70c2ae2b375aa53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9864
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
SPDK nvmf target reports all listeners on all subsystems
in discovery pages, kernel target reports only subsystems
listening on a port where discovery command is received.
NVMEoF specification allows to specify any addresses/
transport types. Ch 5: The set of Discovery Log entries should
include all applicable addresses on the same fabric as the
Discovery Service and may include addresses on other fabrics.
To align SPDK and kernel targets behaviour, add filtering
rules to allow flexible configuration of what should be
listed in discovery log page entries.
Fixes#2082
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie981edebb29206793d3310940034dcbb22c52441
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9185
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The qpair's state member is only 3 bits of a uint8_t,
and the in_completion_context bit is another bit in that
same uint8_t.
We know that the qpair's state is only ever updated by
one thread, but it is possible that the state could
be modified by one thread, while another thread
is modifying in_completion_context.
in_completion_context is only modified by the thread
that is polling the qpair (or the qpair's poll group).
But with async mode, another thread that has a qpair
on the same PCIe controller could poll its adminq and
reap the SQ completion for the qpair that's owned by
the other thread.
So do *not* set the generic qpair state to CONNECTED
from the SQ completion callback. Instead just set
the pcie_state to READY, and let the thread that owns
the qpair detect the qpair is READY and set the state
to CONNECTED itself.
Fixes issue #2157.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9efc0c954504f1841e1c3890ae78211ad0d1990e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9975
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Currently either HW Engine Channel or SW Engine Channel will be used.
In the case that HW Engine Channel is used while does not support related
operations like IOAT for CRC, it will shift back to the SW Engine's handle.
So that this is an issue that it still refers to the HW Engine Channel
while needs SW Eninge Channel to handle.
This patch introduces the SW Eninge Channel and always initializes there
in case that HW Engine does not support some operations.
Related UT also added to simulate the case the IOAT does not support CRC
and then SW Eninge needs to properly handle it.
Change-Id: I4ecdcd09ab669a616b37c567b45b1e6499800ec9
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
In some cases a single virtually contriguos memory
buffer can be translated to several chunks of memory.
To make such translation possible, update structure
spdk_memory_domain_translation_result to use a pointer
to iovec.
Add a single iov structure or cases where translation
is always 1:1, it will make easier translation callback
implementation. For RDMA transport translation of address
is always 1:1, so treat iovcnt other than 1 as an
error.
Change-Id: I65605575d43a490490eba72c1eb19f3a09d55ec6
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9779
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of a union with domain type specific
parameters, store an opaque pointer to user
context. Depending on the memory domain type,
this context can be cast to a specific struct,
e.g. to spdk_memory_domain_rdma_ctx for RDMA
memory domains.
This change provides more flexibility to
applications to create and manage custom
memory domains
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Change-Id: Ib0a8297de80773d86edc9849beb4cbc693ef5414
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9778
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Push operation complements existing pull
operation and allows to implement read data
flow using memory domains.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Change-Id: I0a3ddcb88c433dff7a9c761a99838658c72c43fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9701
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The previous patch supported I/O retry when no available io_path
was found at submission.
This patch supports I/O retry when we get I/O path error at completion.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I93a1664944b15ab0a826a321e2ea7a2574263afe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9850
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If ANA state is inaccessible or qpair is disconnected, I/O cannot
be submitted.
But if qpair is connected, ANA state may become accessible, or if
qpair is disconnected, it may become connected via resetting.
Hence even if find_io_path() returned NULL, queue I/O and retry it
one second later if qpair is connected or ctrlr is resetting.
Sort retried I/Os by expiration values in ticks, and activate a timed
poller per nvme_bdev_channel only if there is any retried I/O. So
the poller function bdev_nvme_retry_ios() always returns BUSY because
if the poller runs earlier than the closest retried I/O or runs when
there is no retried I/O, it is more like a bug of the framework.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id28110a0d63ebc1c5772814e2ff8a47934df1644
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9830
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The new name suits better to the following "data push"
operation
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ic3249f65de203f375477f8e87b0749b9502d165c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9878
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iovs are not needed in the callback
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I29718f1f2e65881628b72dea938e40c60348b85d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9877
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If NN is very large this saves a lot of memory. This lookup is
not generally used in the I/O path anyway.
Change-Id: I98e190006843ad5d0bac8483bf9feb800d4a665a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9884
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the SPDK NVMe driver, spdk_nvme_ctrlr_reset_async() sets
ctrlr->is_failed to false and spdk_nvme_ctrlr_reset_poll_async() sets
ctrlr->is_failed to true if it fails.
On the other hand, in the unit test for the NVMe bdev module,
the stub for spdk_nvme_ctrlr_reset_async() does nothing and
the stub for spdk_nvme_ctrlr_reset_poll_async() sets ctrlr->is_failed
to false if it succeeds.
This bug made us very difficult to write unit test for I/O retry.
Hence fix this bug.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic0dcf1109ce543a53fca74708fc86c8c74a17692
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9829
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_find_io_path() selects an io_path whose qpair is connected
and ANA state is optimized or non-optimized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I79c978795562b606ee27aa43020684d8bcbf50c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9405
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reset all controllers of a bdev controller sequentially. When resetting
a controller is completed, check if there is next controller, and
start resetting the controller.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I169a84b931c6b03b36bb971d73d5a05caabf8e65
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7274
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously the NVMe bdev module had completed the outstanding reset and
then canceled pending resets. This was complex.
On the other hand, the generic bdev layer cancels pending resets
and then completes the outstanding reset.
Following the generic bdev layer simplifies the code and makes us easier
to control retry reset, delay retry reset by a few seconds, or stop retry
after repeated failures and then delete ctrlr.
Update unit tests accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9a68422918ebcb052b3a281316ffba9b3450ecd4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9816
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Otherwise compiler complains that this variable
is used uninitialized (scsi_dev_find_free_lun does
reference it).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8fce604f22e06f7007669510f8ba0ae27c44261a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9868
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previous patches (5363eb3c) tried to work around the
32-bit unmap and write_zeroes LBA counts by breaking
up larger operations into smaller chunks of max size
UINT32_MAX lba chunks.
But some SSDs may just ignore unmap operations that
are not aligned to full physical block boundaries -
and a UINT32_MAX lba unmap on a 512B logical /
4KiB physical SSD would not be aligned. If the SSD
decided to ignore the unmap/deallocate (which it is
allowed to do according to NVMe spec), we could end
up with not unmapping *any* blocks. Probably SSDs
should always be trying hard to unmap as many
blocks as possible, but let's not try to depend on
that in blobstore.
So one option would be to break them into chunks
close to UINT32_MAX which are still aligned to
4KiB boundaries. But the better fix is to just
change the unmap and write_zeroes APIs to take
64-bit arguments, and then we can avoid the
chunking altogether.
Fixes issue #2190.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23998e493a764d466927c3520c7a8c7f943000a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9737
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_admin_passthru() chooses the first ctrlr which is not failed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If41a1d1e1bde4bddfa92e5a385509daa3f0ce4de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9525
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We have io_path structure now and returning io_path rather than
ns and qpair match the function name. The following patches will
cache the returned io_path into nvme_bdev_io.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5d773da18591fc324667f6b5c489a38f497bf3d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9295
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes the critical limitation that ctrlrs which are
aggregated need to have no namespace. After this patch, we can
add multiple namespaces into a single nvme_bdev.
The conditions that such namespaces satisfy are,
- they are in the same NVM subsystem,
- they are in different ctrlrs,
- they are identical.
Additionally, if we add one or more namespaces to an existing
nvme_bdev and there are active nvme_bdev_channels, the corresponding
I/O paths are added to these nvme_bdev_channels.
Even after this patch, ANA state is not utilized in I/O paths yet.
It will be done in the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I15db35451e640d4beb99b138a4762243bee0d0f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8131
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
