Currently, this just reports the EUI64 and NGUID types, which are
already available in the Identify Namespace data, but this sets up the
framework for reporting a Namespace UUID (which doesn't have a
corresponding field in Identify Namespace) in the future.
Change-Id: I758e6d402ff874d65eca3f1db98d92c1a3f7a11f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch is used to implement the sock fd event group
polling mechanism if there are incoming data from network
(read event in SPDK iSCSI target side) , thus we can awake
many connections one time, and it can reduce the system call
overhead.
Change-Id: I76c26a89ef9365d7e1ccec616985e7435253896b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399796
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ctrlrs list maintanined by the subsystem structure should be operated
by the thread which creates the subsystem. And this will make the
operations correct.
Change-Id: I7f881a77b1846658b3acd4270b74f86816e87803
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401541
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unit tests that use this will still immediately execute
the messages by default. But upcoming changes to
queue persists will need to leverage testing asynchronous
behavior so these changes enable that.
While here, fix some bugs where _bs_flush_scheduler()
did not fully flush the queue of scheduled ops.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I009e8277eef41d7e3677d9f135db34d8eaf2f071
Reviewed-on: https://review.gerrithub.io/401256
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Finish the sequence first, before calling _spdk_bs_free().
Otherwise synchronous bs_devs (like we use in the unit
tests) cause the sequence memory to get freed via
_spdk_bs_free() and then we try to finish the sequence.
This eliminates the need for g_scheduler_delay and
_bs_flush_scheduler() in the blob unit tests. But don't
remove them - they will be useful in upcoming unit tests
for queued persist operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I09aac3ae4d3a56ff8e04a5b822fcd6746f13afc3
Reviewed-on: https://review.gerrithub.io/401267
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic2bae1c750d2c9b35bded8ed96c3b84832690ce2
Reviewed-on: https://review.gerrithub.io/401479
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
During converting type of CHAP params of target from int to bool
for JSON, changed names of them to be consistent with others.
In this patch, adjust variable name of struct to of JSON.
Change-Id: I1ccbfa11d57479dc55680835eb80e111bd24d9a3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400928
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Besides names of variables and parameters about CHAP are not unified
between JSON-RPC and SPDK internal. JSON-RPC's wording looks better
and adjust SPDK internal to JSON-RPC.
Change-Id: I89bcd1ce13a11f7d63a62d51ef094dd302186d37
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These new names are much more clear and are aligned with other
functions such as spdk_blob_close.
Keep the old names around for now but deprecate them. We will
remove them in next release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idc60fd0b19fa2a8b0247a1f5835774d342e721f9
Reviewed-on: https://review.gerrithub.io/400884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is needed for an upcoming change which will
prevent metadata functions from being called on
threads other than the metadata thread. Without
this change, there was no way for this function
to return an error if it was called from the wrong
thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67e591140194ff6ad250878168f6b166a1ff2282
Reviewed-on: https://review.gerrithub.io/400883
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There was some thinking that we would need to allocate
I/O channels on a per-blob basis to handle dynamic
resizing during I/O. Making spdk_blob an opaque handle,
with the existing spdk_blob structure renamed to
spdk_blob_data was a first step towards making that
happen. But more recent work on blobstore has
simplified the resizing approach, so this spdk_blob_data
is no longer needed. So revert it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22e07008faceb70649ee560176ebe5e014d5f1a3
Reviewed-on: https://review.gerrithub.io/400881
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can be enabled with -t nvme in debug builds.
Change-Id: I4392d0a7decd65cc567fdf6fd56cac6db0424cd8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unify several similar functions checking for a buffer of all zero bytes
into the util library.
Change-Id: Idfbeffa22add34ac9ed1bd75ee27d6bd8b188940
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In early days of SPDK, there was an experimental userspace
TCP stack called libuns. The SPDK iSCSI target supported
using either the default POSIX/kernel TCP stack or this
libuns TCP stack.
libuns is no longer in use, but work has started on
supporting the FD.io VPP TCP userspace stack. Abstractions
are being put in place to allow *both* the POSIX and VPP
stacks simultaneously.
So remove the concept of a "default" net_framework that is
defined with weak symbols that can be overridden by another
object file. While here, also remove the "clear_socket_association"
concept which was specific to libuns.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a0385ca5ae113e34a637f835d8d69f8d510433e
Reviewed-on: https://review.gerrithub.io/400328
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_vhost_dev_has_feature() is internal function so we can move it's
declaration to header file. This remove function call overhead.
Change-Id: I1704e8279cd6720177047a1ae8818f68982998db
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/400241
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
adding nvme_ctrlr_destruct_finish because nvme_transport_ctrlr_destruct may
use a destroyed mutex.
nvme_ctrlr_destruct() free "ctrlr_lock" and after that call
nvme_transport_ctrlr_destruct()->nvme_pcie_ctrlr_destruct()(with pci)->
nvme_ctrlr_proc_get_devhandle()->nvme_robust_mutex_lock(&ctrlr->ctrlr_lock);
Change-Id: I55714ea9097d2c9d844a00b5a88fa2d51a3f4469
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Reviewed-on: https://review.gerrithub.io/399605
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add optional parameters to namespace creation to let the user pick the
namespace globally unique identifier and EUI-64.
Change-Id: Ia3eebaf22f8a64733a00a83f90cafb4977c2d07a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399531
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ice343afdc84c2a11cd9026d128a35f7a62aa7125
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398933
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will allow more parameters to be added to
spdk_nvmf_subsystem_add_ns() without breaking API/ABI compatibility
later.
Change-Id: I6b2f58f1a2d5fcd4c754830cbd4713dc461a31fc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399519
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The subsystem->ns array may be resized with realloc(), so old ns
pointers can become invalid.
To fix this, allocate each ns as a separate object, and change the
subsystem->ns[] array to point to the namespaces rather than containing
them.
Change-Id: I873502fa90cf840e4eaa9b1abd94a95afe0f737f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399726
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to solve
https://github.com/spdk/spdk/issues/235
With multiple core bining for NVMe-oF target,
the qpairs which belonging to the same ctrlr may
be scheduled to different cores. Thus there is
resource contention to access the struct spdk_nvmf_ctrlr.
And we put the thread info in polling group. Morever,
we introduce an admin_qpair in ctrlr. Since admin_qpair will
always be created at first and freed at last, to reference
this pointer is safe.
Change-Id: I12ac26f9e65b4ed8e48687750046455af0e3be1d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/398904
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding new initiator to an existing initiator group to allow login
will be usual. This patch support the following JSON-RPC commands:
- add_initiators_to_initiator_group
- delete_initiators_from_initiator_group
Both initiator's name and netmask are optional but already added
name or netmask cannot be added.
Test code is added too.
Change-Id: Ic101210b9d00c2b36e37ece23fcba8cfe8e44eb8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/398361
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is to add the support of periodically
running poller. A setting is added for the increased
time so that the poller on that thread can be running
or not depending on the required setting.
UT code also added for this new functionality.
Change-Id: I0d012ddb18c9b0f6ae8aa877a30d214d6ba34946
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/398359
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reallocate the send buffer if more data is written by the RPC handler
than currently fits in the buffer.
Change-Id: I590dd173b843aba48c768adfafaf87e4b47bcc19
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399925
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This refactors the way we setup vhost devices.
Hopefully when we change internal vhost ABI/logic
in future, we won't have to go through all vhost
test cases and refactor them.
alloc_vdev - allocate *and* register the device.
It makes little to no sense to have a non-registered
device since you cannot call any spdk_vhost_dev_*
functions on it.
start_vdev - simulate a connection on the device
socket
stop_vdev - close the connection
cleanup_vdev - do everything necessary to cleanup
and free the vdev This implies closing the connection.
Change-Id: Ic97f969ec7a57cec7092c0f7681c2e7e44ceb31e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399603
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0ae2294e69262ce0dfc9810815ced2ae16d768b9
Reviewed-on: https://review.gerrithub.io/399760
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3190c98aa27b4723ce525911541efccc7972f733
Reviewed-on: https://review.gerrithub.io/399759
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ec4b2e1421a1b0ba5ad005d5376a1a556ea4d7b
Reviewed-on: https://review.gerrithub.io/399749
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iac7fe5d4fb816692bda92766002dcb910bb4e558
Reviewed-on: https://review.gerrithub.io/399748
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85838adb25505c793f09e956740ee66723fe4493
Reviewed-on: https://review.gerrithub.io/399747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I833ca74093f55ae296d2db4a2dd7a1e482c945dc
Reviewed-on: https://review.gerrithub.io/399730
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I06d33ff7f6df0724768f5a23236485c26e0568f4
Reviewed-on: https://review.gerrithub.io/399729
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4b0704021bc8e9ccbc6ed6ce7ac8eb1efad4a561
Reviewed-on: https://review.gerrithub.io/399728
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This includes removing the nvmf.unittest.mk that these
unit tests were using previously.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b53db0a565aee910587826b37e8b43d6a324e75
Reviewed-on: https://review.gerrithub.io/399724
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This includes removing the json.unittest.mk that these
unit tests were using previously.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icfa2e5a5554b686002407d1ef5328a0aecb442f1
Reviewed-on: https://review.gerrithub.io/399723
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I53a04187638a8ea4569b18bb4959b0bcf7f3d860
Reviewed-on: https://review.gerrithub.io/399717
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is the first of a long line of patches which will
reduce Makefile rule duplication in all of our SPDK
unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1cd6e9e1e9cabab0a15dbcb901e4db782d73b1a4
Reviewed-on: https://review.gerrithub.io/399716
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These aren't needed - the common %.o rule is sufficient.
As part of this patch, remove OTHER_FILES references from
nvme and nvmf unit tests, and just include these .c files
directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I76ab20da2f560c7997e978fcbfe28c2a4907f759
Reviewed-on: https://review.gerrithub.io/399715
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Drop max vhost initiators limitation in SPDK (64).
We're still limited by rte_vhost limits, but
they're set to 1024 at the moment.
Change-Id: Ia1ad25665d6e798bc22709cdd43b72d60f1f4cf0
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/389811
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rather than being smart and hacking vdev struct
internals, let's properly initialize it with
spdk_vhost_dev_register(). This will avoid
failures on potential vhost changes in future.
Change-Id: I3f13b542e313a2f890963baa96679e9d74c23a9e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399443
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This test case doesn't work. The title suggests
that unregistering non-registered device should
fail - but in fact we don't check against that.
The test expects failure, but fails due to a
different issue - the device is in use. And there
is already a separate test for this case.
Device is considered in use when it's vid is != -1,
and we always init the vid to 10 inside alloc_vdev.
Change-Id: I8de1afce8f6bcbd2a6bfbb30870265e30b2a9a41
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399590
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For now, this provides common abstraction for Linux epoll
and FreeBSD kqueue. It also provides the basis for future
changes where alternate userspace TCP stacks have their own
mechanism for polling a group of descriptors.
While here, remove old epoll/kqueue code in iscsi/conn.c that
was commented out when the iSCSI idle connection code was
recently removed - we now have a real implementation of it
in sock.c so the original code is no longer needed as a
reference.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I664ae32a5ff4d37711b7f534149eb0eb35942335
Reviewed-on: https://review.gerrithub.io/398969
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Patch adds internal version of xattr functions to allow
operations on internal xattrs, which are not visible to
upper layers.
When there is at least one internal xattr set, also
SPDK_BLOB_INTERNAL_XATTR flag is set in invalid_flags to prevent
loading this blob in previous spdk versions.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Iec918ec858f069f7cd9f36d5e8f0495ffa4a42d8
Reviewed-on: https://review.gerrithub.io/395122
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I2a3c7a272dc08be5a5ecb4339622816482c4cbb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397036
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Enable address translation for I/O buffers within the controller memory
buffer region by registering the CMB using spdk_mem_register().
Change-Id: I44829757ad15fbc3ea96fa494b9fb32dd67a7138
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397035
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
