spdk_bdev_part_construct() must be now called on the
same thread that called spdk_bdev_part_base_construct().
This was always the case so far and I don't see any other
case where thread safety could be useful, so just remove
it. The doxygen doesn't say anything about it either.
Even in GPT case, we create a base directly as a part of
examine and then create part bdevs in the spdk_bdev_read()
completion callback, but that callback will be always
executed on the same thread which issued the read.
Change-Id: I752f2a7f08c9faf4231ed53a46b700b33fa13697
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds new interface for opening bdev and
implements new style remove event. With that changes
user can be notified about different types of events
that occur in regards to bdev. spdk_bdev_open_ext
function uses bdev name as an argument instead of bdev
structure to remove race condition where user gets
the bdev structure and bdev is removed after getting
that structure and before open function is called.
spdk_bdev_open is now deprecated.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I44ebeb988bc6a2f441fc6a0c38a30668aad999ad
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Every exit path in spdk_bdev_set_qos_rate_limits() should
go through _spdk_bdev_set_qos_limit_done() as soon as
ctx is allocated and qos_mod_in_progress set to true.
This patch fixes one path were it did not occur.
With this change qos_mod_in_progress is set to false,
when failure in allocating qos parameters occurs.
Change-Id: I04a45dfdcde9160fd2701b44f5fde26fb0245177
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final placement of naming of libraries at the end of time.
Change-Id: Ic48a9233dff564e39ce357a9ea0a111ea2b6414b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Only affects QAT where only partial data transfers would occur
when a host buffer crossed a 2MB boundary.
fixes issue #897
Change-Id: Ib20bfb3557c11a6da996f4b209e9bb7c634f8f49
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464719
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
The previous patch in this series introduced the notion of an
orphan comp bdev which is available only for deletion due to
a missing PMEM file. This RPC allows applications to list
orphaned comp bdevs as they will not show up with get_bdevs
because they are not registered bdevs.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I431f9cdebd4e5ae6068308639cb41d6c52f7309b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a vol load fails because of a missing pmem file, instead of
doing nothing we now claim the underlying bdev and make an entry
in our global list for a comp bdev so that the regular delete
RPC can be used to delete the comp bdev.
fixes issue #890
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icd5357060648e722f94e8f6b9038c8dad032feb3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465807
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
So it can be called from an earlier one in the next patch.
Change-Id: I1e79669d33d84e54c27305e38076cbdafea627e3
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465986
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Will be re-used in an upcoming patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I676beb7f61c100043189c56484a41c209cd2942d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This is a part of a change that will introduce
new spdk_bdev_open_ext function. This will make
possible to pass callback function while opening
bdev which will be called when some bdev events
occur.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3e552edd5c90dacd39885e75e9114e48dddf50ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The arithmetic was backwards when computing the latency values to
report back to rpc calls like get_bdev. This caused reasonably sized
latency values to report back 0.
Change-Id: I85e22c9c8aa202a2ac1db7e7081f397800b151b8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465168
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Part of a larger series unifying and simplifying the library directory
structure.
Change-Id: I2782165aabbea9a31cc466fc7e3bb2b9263142dc
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Because required alignment is already set to block size and by design
the crypto module does one crypto operation per block (it uses the
LBA as the initialization vector) it should not be possible to get
a physical address that spans however adding an assert just in case.
Change-Id: I1dc844d0a32395f9ed4869429368f60b919703a4
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is patch that implements changes according to proposal
submitted in https://review.gerrithub.io/c/spdk/spdk/+/453036
Change-Id: I5423cd34cb5fc111b34cab2b7f7c6c5f11898af8
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464677
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
WRITE_TO_RO_PAGE was incorrect and misleading. This
0x82 NVMe status code indicates a write to a read-only
range of LBAs. So modify the constant name and
associated usages to use WRITE_TO_RO_RANGE instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I993dbebb5acc2e685a0e99aa14084942ef79d659
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will allow us to do interesting things in tests like configure a
bdev with a really long delay, and allow I/O to build up on a target to
see what happens, then decrease the latency to allow traffic to flow
through normally without ever having to delete and reconfigure the bdev.
Change-Id: Ibcb1101f8eed9fe3094ba239110cb4e49ace6554
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464454
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Becomes important in next patch
Change-Id: Ida19f0b59c4b841d6f5120f9130e24b57ae91560
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464717
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Data type of number of base bdevs are corrupted. uint8_t is enough
and unify almost all related variables into uint8_t.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I323aaa229a76c3d5b5361d7643c3a9591ccad340
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464357
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Checking if required parameters strip_size, num_base_bdevs, and
raid_level had been done in raid_bdev_config_add(). However, this
required us to use integer type.
If we do the check in raid_bdev_parse_raid(), we will be able to
use the same type between function parameters and variables of
struct, and hence do in this patch.
This will align with the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I10fd75f25ed9a5d40eb189b05c2a20c276fa3ad6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following issue was observed.
The first thread returned the last IO channel and the second thread
then removed the first base device, but raid_bdev_cleanup() was
called before raid_bdev_destroy_cb() was called.
raid_bdev_destroy_cb() was accessed to the raid bdev already freed
by raid_bdev_cleanup() and caused segmentation fault.
The call sequence was as follows:
The first thread:
spdk_put_io_channel() -> ch->destroy_cb -> raid_bdev_destroy_cb
-> access raid bdev
The second thread:
raid_bdev_remove_base_devices() -> raid_bdev_deconfigure() ->
spdk_bdev_unregister() -> spdk_io_device_unregister() ->
spdk_bdev_destroy_cb() -> raid_bdev_destruct() -> raid_bdev_cleanup()
-> free raid bdev
The fix is to hold number of created channels in struct
raid_bdev_io_channel and use it in raid_bdev_destroy_cb().
Bdev layer, IO device/channel layer, and NVMe-oF layer already
process this case correctly.
Fixes#884.
Reported-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ie9d61bdddca479ce7f491ff9a08db45e71f16a8d
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463249
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After recent changes, that function can not return
NULL anymore, so remove all redundant checks from
various SPDK libraries.
Change-Id: If80344b6fa81ad5f87a7086804dba221522cd7e2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_jsonrpc_send_error_response() is documented as a
shorthand for spdk_jsonrpc_begin_result() + end result,
but we used to call it already after doing
spdk_jsonrpc_begin_result(), which makes the response
completely invalid.
Fix it by deferring the initial spdk_jsonrpc_begin_result()
until after we did our error checking. While here, remove
the NULL checks from that function. After recent jsonrpc
changes it can never return NULL.
Change-Id: Ibb69803d4e6ce6516817673eec6626dcfc4f1abf
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
'ResetControllerOnTimeout' was renamed to 'ActionOnTimeout' for a
long time, so we deprecate the support for this old configuration
option.
Change-Id: Ia44035a8749ca046c1df16f82601389b5bafeb76
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK_NVME_DEFAULT_RETRY_COUNT is the default value for each controller, so
we can move it out from public header file, and change the value if users
provide a new one.
"NvmeRetryCount" was deprecated for a long time, so we removed the support
for this configuration option as well.
Change-Id: I187251cc1e5342abb4fce96727d06631b7c16a01
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The lines in this file are extremely long. astyle doesn't
really allow us to always go under 100, but we can at least
try to do our best.
Change-Id: I36f454b67460cadf92f99578512349d048d4861b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462377
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Ran into this while putting the compress tests in CI, an error
message will print following the completion of the app, checked
with Jim and it is actually not an error when lvols are involved
so change to warn now as this will show up in everyone's build
log for bdev testing.
Change-Id: Ib509b89acf5b6bfbeb349692ab59bbea4964557f
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Will execute short run per patch, longer nightly. This
path only covers the ISAL PMD as there are QAT upgrades
needed in CI. It does so by using the new 'perform_tests'
RPC in both bdevio and bdevperf.
Change-Id: I93afda336d7411b695b2ddd0332cce0050d075a4
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455113
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A single I/O may allocate more than one request, since splitting may be
necessary to conform to the device's maximum transfer size, PRP list
compatibility requirements, or driver-assisted striping. Very big
I/O request sent from application may get error due to limited resources
in NVMe driver layer, so here we add an optional parameter to make the
parameter can be configured by users.
Fix issue #745.
Change-Id: I7824232c54865b052dcd0ec6e91484c3837fc2c4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461182
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For aarch64 spdk_mb is defined as "__asm volatile("dsb sy" ::: "memory")"
and spdk_smp_mb is defined as "__asm volatile("dmb ish" ::: "memory")".
"dsb sy" completes when all instructions before this instruction complete.
And "dmb ish" only keeps the order of memory access instructions before
and after it. It doesn't affect the ordering of any other instructions.
Here I think "dmb ish" is enough.
And replace spdk_mb with spdk_smp_mb here will not affect PPC64, X86_64
and i386.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Idd65f74567c594e5a6514a4ab0665b8f3606c883
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463455
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Was 1024 but w/the performance optimizations we can now use up
to 4 mbufs per outstanding IO so going to 8192 only uses 1MB of
mem and gives us better head room before we have to start queueing
compression operations to wait for mbufs. Note: the mbuf pool is
shared accross all virtual compression bdevs.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I64d3973e7c7d31925b1ce5028ef960f90331c067
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463538
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There's a small drive-by in here also, use the max iovec define
from the reduce header instead of manually making sure its the same
here.
The change in the size of the MBUF pool is to accommodate the new
QAT driver being faster (?) than the old such that we could run out
of MBUFS with a fio test using 6 threads. On the + side, when we did
the queueing code in the compression operation worked good.
Also related to QAT and experimenting with fio compression ratios, QAT
can fairly often return an error on compression that we were treating
as an error for printing, change it to a NOTCELOG instead of an error.
Change-Id: Id842064b7d659f7ad7f9d785ffffdc6b827f6989
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Old name was misleading due to earlier changes
Change-Id: Ic04223db983e98c9703a43e6778b0094f99bc81d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463341
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
qpairs can be limited by the compression polled mode driver or
system resources and we need one per thread so if we run out we
have to fail the callback.
Change-Id: Ibd07d9c65880e7de321c439119aed479ef00746c
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When connecting to an iscsi url that effectively does not exist we free
the data structures of the very context we are processing. This results in a
use after free and subsequently in a crash.
Signed-off-by: Jeffry Molanus <jeffry.molanus@gmail.com>
Change-Id: I67cab1efb161bfa23fa1022e150661080d90b556
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462614
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Jeffry Molanus <Jeffry.molanus@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If available, if not use the bdev unique name. This results in
a much friendlier comp_bdev naem for the user. For example,
now it would look something like this: COMP_lvs0/lvs as opposed
to like this COMP_0b149b31-b66b-4cf7-ab39-a55b50788cd1
Change-Id: I319a141221ed8880edcec930ca5be9f256b105e0
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463246
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Was previously creating the number of qp based on the # of cores
reported via DPDK function. Also was assigning one qp per comp_bdev.
After testing w/multiple threads in fio 2 things needed to change:
* remove use of rte core related functions as fio threads are not EAL
threads. This required choosing an upper limit for the number of
threads that the bdev module will support
* changing the qp assignment code such that comp_bdevs share the
same device_qp if on the same thread
Fixes issue #879
Change-Id: Ib968ee04bef63013616546341974a4431d8f266a
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Improve error messages where possible.
Also change return code values to negative in bdev_pmem.c so that
it follows the same pattern as other bdev modules.
Change-Id: I81b205a41104e15457154d1e31540210636ef9d3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461548
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added parsing and saving of (optional) parameters which are responsible for
relocation in FTL. Changing the parameters may affect Write
Amplification Factor and overall performance, especially during random
write workloads. If parameters are not specified, default values will be used.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ic0229e39109460f3541c31e1cbf2a485efe408c6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460504
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changed write_config to use the ftl configuration file instead of
allow_open_bands directly. This allows for easier expansion of saved
fields.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ie1d480983636f26840dba9a3a6c93b2883903bdb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460519
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Ftl should no longer require 4k alignment for I/O buffers for either
internal or external requests. The 4k alignment was needed due
to a bug in QEMU when handling internal SGL buffers in LNVM commands.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Icafc14b7811c9c0ffa13789e341c453503cf2821
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Issue reports:
vbdev_crypto.c:695:12: warning: The left operand of '+' is a garbage value
iv_ptr = rte_crypto_op_ctod_offset(crypto_ops[crypto_index], uint8_t *,
Change-Id: I1a4f89111e94a13d8daf38070aa69306783a83c5
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
On Fedora30, GCC9+ reports errors:
Issues report:
vbdev_compress.c:482:17: warning: Assigned value is garbage or undefined
comp_op->m_src = src_mbufs[0];
^ ~~~~~~~~~~~~
vbdev_compress.c:502:17: warning: Assigned value is garbage or undefined
comp_op->m_dst = dst_mbufs[0];
^ ~~~~~~~~~~~~
vbdev_compress.c:491:3: warning: 1st function call argument is an uninitialized value
rte_pktmbuf_attach_extbuf(dst_mbufs[iov_index],
compress_ut.c:826:2: warning: Attempt to free released memory
free(g_mbuf_mp);
^~~~~~~~~~~~~~~
Should remove free(g_mbuf_mp), for pointer exchange.
Change-Id: I1a48b7c309a4e2aa0aa513f9be44ae3504d9e385
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462574
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As spdk_jsonrpc_begin_result() is not allowed to return NULL we can
remove these checks. We didn't have any tests cases that goes this path
anyway.
Change-Id: I0894e76c0162591e550e70b172566b9060a6dd5f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If subsystem bdev module initialize failed, it will call
spdk_bdev_init_complete(-1) -> (subsystem bdev)->fini
_spdk_bdev_finish_unregister_bdevs_iter -> spdk_bdev_module_finish_iter
In abovt path, spdk_bdev_module_finish_iter will repeate to call
bdev_module->module_fini function. Some bdevs will call spdk_io_device_unregister
which never call spdk_io_device_register. It will coredump when assert false in
spdk_io_device_unregister dev is null.
To fix this, let's check whether g_bdev_mgr.module_init_complete is equals true
and then call the bdev_module->module_fini.
Change-Id: Ia9a13318720d954e40eb2d666574bcb86e5f49e3
Signed-off-by: Tianyu Yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462382
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve error messages where possible.
Modify spdk_bdev_rbd_create() to return instead instead
of pointer for better return code handling.
Change-Id: I5fcf90794f5fe44296422c654c5f8d404f3d5eef
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These arguments are obligatory and spdk_json_decode_object will
fail even before we reach the if block.
Change-Id: I3c17faf570aefc7d96d009a595cf3a76994977e7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462043
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve error messages where possible.
Modify parts of the code so that it follows the same pattern
as in previousle changed bdev modules.
Change-Id: I6672a14900326029c670bfca99a6d085093861c3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461553
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
lvol_name is not an optional argument when creating a lvol bdev.
Also removing unnecessary if block.
Change-Id: I7d5790d648bce7f02bfed34bd714162d3ccb10ab
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461861
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These arguments are obligatory and spdk_json_decode_object will
fail even before we reach the if block.
Change-Id: I295649629770ef062086308257da83a8bab44588
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now that vhost closes bdev descriptors on the same thread
that opened them, we can reintroduce thread asserts into
the bdev layer.
This reverts commit 283abcb9a2.
Change-Id: I1acc455df0674b808ecf2fa58dffd183db6cf3c2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459168
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch makes sure we're on the thread that requested creation /
deletion of the device when calling the notification callback.
Change-Id: Ia11a8054692874f6b57d4ebe3e3cb290c58e83b6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In case some module has `async_init = true` and
some other module that comes after it fails to initialize,
then callback from asynchronously initialized module
may call `spdk_bdev_init_complete()` first, then failed module
will call `spdk_bdev_init_complete()` later.
This currently results in NULL dereference because
first call to `spdk_bdev_init_complete()` sets `g_init_cb_fn = NULL`.
This change prevents first call to `spdk_bdev_init_complete()`
by saying that failed module is not finished with initialization.
This patch fixes#847
Change-Id: Ib6b231d5ea27896ad88d7f11b8732921077b3d4d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
iSCSI target does not allocate data buffer on read, and delegate
allocation to the bdev.
When the bdev is a split vbdev, the split vbdev does not allocate
data buffer and delegate allocation to the backend bdev.
In this case, iSCSI target expects the buffer is allocated until
notifying completion to the split vbdev. However, the split vbdev
notifies completion to the backend bdev when calling the callback
of iSCSI target. The backend bdev frees the buffer immediately,
but iSCSI target still uses the buffer. If the buffer is reused
by another I/O, data corruption will occur.
For this issue, vbdev_gpt_submti_request() calls
spdk_bdev_io_get_buf() when the I/O is read, and its callback
vbdev_gpt_get_buf_cb calls _vbdev_gpt_submit_request() then.
This will ensure the buffer is allocated before forwarding I/O
to the backed bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb2eac500276ab5012123b7d6f7eb033d87ad17c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
iSCSI target does not allocate data buffer on read, and delegate
allocation to the bdev.
When the bdev is a split vbdev, the split vbdev does not allocate
data buffer and delegate allocation to the backend bdev.
In this case, iSCSI target expects the buffer is allocated until
notifying completion to the split vbdev. However, the split vbdev
notifies completion to the backend bdev when calling the callback
of iSCSI target. The backend bdev frees the buffer immediately,
but iSCSI target still uses the buffer. If the buffer is reused
by another I/O, data corruption will occur.
For this issue, vbdev_split_submti_request() calls
spdk_bdev_io_get_buf() when the I/O is read, and its callback
vbdev_split_get_buf_cb calls _vbdev_split_submit_request() then.
This will ensure the buffer is allocated before forwarding I/O
to the backed bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icfd0663b548479ac0bf6b5b49420f144142e3300
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When using stacked virtual bdev (e.g. split virtual bdev), block
address space will be remapped during I/O processing and so
reference tag have to be remapped accordingly.
This patch adds an new helper function spdk_bdev_part_remap_dif
and call it before submitting write I/O or after completing read
I/O.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idfc6081893861d412c19a9edfb348a7faa7e8c5b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461106
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
All IO types but reset have used the remapped offset to submit I/O
to the base bdev. Previously each IO type had got the remapped
offset by itself. Consolidating it into a place will improve
readability and will be helpful for the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I29465e92d8fb62e45cfc97c52fedaa661b2f0602
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In future patch in new spdk_bdev_open_ext function we will call
spdk_bdev_get_by_name function and after that call and before
calling old spdk_bdev_open routine bdev can be removed.
We need to add mutex which will prevent that. Any future code
should use this mutex when accessing the bdevs list to get
a bdev and perform some operation on it.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I785a1791346aebdd394fc51ad0e7fbfbabf317c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Filename should not be an optional argument.
Making it obligatory removes the need for further checks as it
should then be checked in json decode.
Change-Id: Ia779c2623db8d5cdde3983507e3b2b3cfb7e971f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460958
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It looks like currently we only check bdev names for NULL, but
not for "empty" string.
For example this rpc command:
sudo scripts/rpc.py construct_aio_bdev aio_disk "" 512
Will result in construction of AIO bdev with empty name:
sudo scripts/rpc.py get_bdevs
[...]
"name": "",
"aliases": [],
[...]
Change-Id: I41204096c8cf210a4dc40a8225d1c9dad353f533
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Provide more error codes and/or messages then just a
generic "32602 invalid parameters" error.
Change-Id: I1777f454faef336b10af24dda50a2d5b5e73727f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459948
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For devices that don't have a UUID, the UUID is generated at
registration time. That means that some devices will not have the same
UUID from run to run, but this seems no worse than having no UUID at
all.
Change-Id: Icf6b8517ffcffabafa2b73176dc03d896d0017fe
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In file included from bdev_ut.c:43:
/root/yidong/spdk/lib/bdev/bdev.c:4373:9: warning: Access to field 'bdev'
results in a dereference of a null pointer (loaded from variable 'desc')
return desc->bdev;
^~~~~~~~~~
This is related to issue #822.
Change-Id: I8cd2bafadeff9846169bc9ca67b3c4110e9c0da8
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Also made on the prints a DEBUG message instead and noticed the really
name that was being registered by this component so updated it to
make it look like the rest of SPDK.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I747a846cb365e7db49be50db941e83fb1b265ea0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460244
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When we create a base bdev and then create a split vbdev on top of
the base bdev, if we delete the base bdev first, we have no way to
remove the configuration of the split vbdev. Hence even if we
create a base bdev again, we cannot create any split vbdev on top
of the base bdev again.
The meaning of flag, `removed` of `struct spdk_vbdev_split_config`
is not clear and there will be no issue even if the flag `removed`.
Hence remove the flag `removed` in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I053c95e647721004cecfe4fd8b0f1ff5bb9bf38a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When we run out of bdev_io's child iovs and we had
to round down I/O size to nearest block size boundary,
we used to decrease the existing child_iovcnt and
set a new "child_iov_run_out" flag to terminate the
uppermost splitting loop.
We can get rid of that new flag by just not decreasing
child_iovcnt when rewinding the last few iovs - it
will make the uppermost loop naturally terminate using
the existing checks.
Change-Id: Ie40c7ce135e7fb8fe284afdf7beeebd10af85cb7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459911
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Compilation Warning on fedora30.
In file included from bdev_raid_ut.c:38:
spdk/lib/bdev/raid/bdev_raid.c:325:11: warning:
Use of memory after it is freed. raid_ch->base_channel[pd_idx],
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is related to issue #822.
Change-Id: I6432772fb38ca02bc4f0a02a36ed3fe61b8607c7
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460069
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I6fd1106c2278c2ef8899c822e920252f62266547
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Changed initialization of the ftl lib when using an rpc call to
allow for usage of any default configuration parameters (currently
only allow_open_bands is exposed).
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I73457dfcacc6b1adeffd13ecc6e98001749e00cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459741
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Here is the an example to describe existing issue:
There is a Write request with 64KiB data length, and this IO is cross the IO
boundary. We assume that the parent IO will have 2 children requests, one is
33KiB length, the other one is 31KiB. Here is the view of parent iovs, the
first 33KiB length data has 33 iovs:
iov.[0].iov_length = 1024;
.
.
iov.[31].iov_length = 256;
iov.[32].iov_length = 768;
.
.
iov.[64].iov_length = 1024;
In function _spdk_bdev_io_split(), then you can see that for the 33KiB length
child request, exiting code will run out of child child_iov space and return
error due to last one data buffer is not block size aligned.
Here we can rewind the existing offset to last block size aligned buffer to
avoid the error case, for backend which need aligned data buffer such as
AIO backend, the request will go through spdk_bdev_io_get_buf() again to
do the data copy, otherwise for those backend devices such as NVMe with
hardware SGL support, 256 data segment is fine for them.
Change-Id: I96ebdf29829d86f9b38fab28a7406eedc9fa44ef
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
By default QAT will be selected if available however a new RPC
can be used to either auto-select (default) or specify either
ISAL or QAT.
Change-Id: I37cf7640bbd8cef455583e1eccb8adb59cc419d8
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There is one existing example usage case to describe the issue:
Users(e.g. Vhost-blk target with Windows Guest) call spdk_bdev_readv_blocks()
to submit a 128KiB length data READ request, and the data buffer
provides by vhost isn't aligned, but the backend block device
requires aligned data buffer, so existing function call trace:
spdk_bdev_readv_blocks()-->
spdk_bdev_io_submit()-->
spdk_bdev_io_get_buf()
spdk_bdev_io_get_buf() will allocate buffer from large data
buffer pool for 128KiB length, of course, it will return error
with existing logic.
So here, no matter what the data length is, we can go through
the split process first for both READ and WRITE.
However, there is one scenario that for iSCSI READ request,
the iSCSI layer will not allocate data buffer for the request,
so for this case if the IO boundary is required we should keep
the logic as before.
Change-Id: I67661f5fa4c3c7c561b45c86146759aa3477adbf
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The next patch in this series introduces and RPC that makes the
selection more flexible.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I55617d3c37b51cf9474c358cb92f5218397c0c58
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There were some TODO items in here that were incorrect if using
an underlying block device that had a 4K block size. The values
here will set the compress vol LBA size to match that of the
underlying lvol but the backing IO unit size, the min size that
reduce will use to perform backing device IO is set to 4K as
smaller than this makes little sense given chunk size is currently
at 16K.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic6a9421a25d947ae7d4dce190d6599eec1d4a05a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Module only supports shareable transforms, also adjusted the number
to what we need, just 2.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ieb77b5f1221878ac7a4be5176ed459d5165f8430
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If bdev is configured to use separate buffers for metadata transfer,
but it doesn't support the write zeroes command, pass empty zeroed
buffer to make sure the metadata is cleared out as well.
Change-Id: If6f024266067e5764a28a276296f651d31da4792
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The function spdk_bdev_desc_get_bdev() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: I018f57b7b4bcfe22ec6a97cf5261b9a257ba93de
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456957
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Allow requests using separate buffer for metadata IO if base bdev
supports it. Copy base bdev's metadata configuration (separate /
interleaved, size, DIF type and location).
Change-Id: I89996f89cad805e696cacf0bba486b4cc1f617e6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458407
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Starting with this patch it is possible to remove a
snapshot if there is only a one clone created from it.
In such case snapshot can be removed without any data
copying. This is achieved with following steps (case
with only one clone):
1. Open snapshot (Snapshot1) that shall be removed
2. Check if the Snapshot1 has no more than 1 clone (Clone1)
3. Remove Clone1 entry from Snapshot1
4. If the Snapshot1 has a parent snapshot (Snapshot2):
4a. Add Clone1 entry to the Snapshot2 clones list
4b. Remove Snapshot1 entry from Snapshot2 clones list
5. Open Clone1 blob
6. Freeze I/O operations on Clone1
7. Temporarily override md_ro flag for Snapshot1 and Clone1
for MD modification
8. Merge Snapshot1 and Clone1 clusters maps into Clone1
clusters map
9a. If Snapshot2 is present switch parent ID and backing
bs_dev on Clone1
9b. If Snapshot2 is not present set parent ID to
SPDK_BLOBID_INVALID and backing bs_dev to zeroes_dev
10. Sync MD on Clone1
11. Sync MD on Snapshot1
12. Restore MD flags for Clone1 and Snapshot1
13. Unfreeze I/O on Clone1
14. Close Clone1 blob
15. Remove Snapshot1
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I800724b981af894e01e1912d0077c5b34a2ae634
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
_spdk_bdev_io_split() will be used to requests that have IO buffers.
Change-Id: I5ba0b83e47b84066e6c5032de2e02404155896d3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added basic configuration details (transport type and address,
parallel units, cache info) as well as most important OCSSD geometry
data to get_bdevs driver_specific section.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I00c50706bd9203bcef1701be1b7d87e93c10e57f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456790
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We had "./configure --with-uring" , but actually, it wasn't compiled.
we need add uring to Makefile that code will add this.
then we can continue to verify this module.
Change-Id: I8b98825f6795eb9f9e7b4947d1c7c3a44a6f0f64
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Gives the ability to change behavior of restore after dirty shutdown
without recompiling ftl library. User can define if partial recovery
or error should be returned after such a scenario.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I6dda40df7b92d6a377957e4a70a3eab91a6ac4a9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Improve handling of partial IOs for case when iovcnt == 1.
This case is pretty frqeuent because all data allocated by OCF
have iovcnt == 1 (see ctx->data->alloc() or vbdev_ocf_ctx_data_alloc())
Change-Id: I8d38ca9e9d2bd3e6ce298bf788ce6ed782b56594
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch fixes submission of partial IOs in bottom adapter
Existing check (if offset > 0) was not sufficient to detect partial IOs
because there could be an IO with offset = 0 but length < total size of iovs.
This patch changes the check, but also free operation on completion
because now the old free does not cover all situations when we allocate iovs.
`Partial IOs` are the IOs handled by bottom adapter
which specify only part of the internal iovs vector.
So their length is less that the length of internal iovs vector.
They exist because sometimes parts of single IO from top adapter
need to be sent to different locations.
Also, in general, IOs initiated by OCF (such as cleaner IOs) are represented
as single big iov that is submitted by parts in form of 'Partial IOs'.
Change-Id: I8ae47659fb34904c593a696d74d683a418ac9962
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implement metadata probe functionality to load cache state
from disk.
During metadata probe, we inspect UUIDs of core devices
and create vbdev configurations based on them.
Then, to start vbdev, we use load path (loadq = true).
After this change persistent metadata is officially supported,
we can save and restore cache state from persistant storage.
WriteBack mode is now safe to use in respect to unexpected shutdowns,
because all information about dirty data is also restored during cache load.
Change-Id: I6cf86aabd68177b88638a68ea6a5b78a1068a4d0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455417
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch updates submodule and appropriate functions.
Cleaner poller is now registered only when needed.
Change-Id: Ic4ca7ce6f77b71ac12c19462f62ae7cd96c59006
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455408
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
iSCSI application may set the data iovec to NULL for READ requests.
Change-Id: Ic6b73f62f75dc2d927c18219fa1c2cb242f0528e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
DPDK rte_ring_enqueue_bulk() has free_space parameter to return
the amount of space in the ring after enqueue operation has finished.
This parameter can be used to wait when the ring is almost full and
wake up when there is enough space available in the ring.
Hence we add free_space to spdk_ring_enqueue() and spdk_ring_enqueue()
passes it to rte_ring_enqueue_bulk() simply.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b9d6a5a097cf6dc4b97dfda7442f2c4b0aed4d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The function spdk_bdev_io_get_io_channel() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: Ifa332ce3a489256ccf2f5d0dd9c74a3215c544ce
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function spdk_bdev_io_get_thread() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: Ia25abf57eb88c8df47c83e4edd761a9e02cc1618
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Handle IOs with metadata being transferred in a separate buffer if the
device underneath supports it.
Change-Id: I38887a24d2aad51f674a840367b5dcdeda2d5a8b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds *_with_md family of functions allowing for IO with
metadata being transferred in a separate buffer.
Change-Id: I842d5a00a532cf5d0b0f0738535ea46903674140
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451465
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Existing code in spdk_bdev_write_zeroes_blocks() will call spdk_bdev_free_io()
for the error case, which will cause assertion because the bdev_io isn't
submitted to the backend yet, so we will check the condtion first to
avoid the error case.
Change-Id: If27d78217f709a3315e74c00869d345abd6b9a69
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This module simply sits on another virtual bdev
and adds a simulated average and p99 latency to that drive.
Change-Id: Ie9fc91e27585fd0636cb7dc845cb41744bf24625
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
QAT driver will not load with anything less than 128, may need to
adjust after performance testing.
Change-Id: I4949e6d97e7ed997d14b907dac00cc288dcc331b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456069
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
mbufs are freed with a single call to the first mbuf in the chain
unless we hit an error before we chain them. So free them correctly
when chained and loop through the array one at a time and free them
that way if not.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I80ebb86bc2147b42db89d24f8e985cacf7d4bceb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455019
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move actual submission code to _spdk_bdev_io_do_submit, used by
both normal submission path and QoS path.
Previous patch(review.gerrithub.io/c/442127) adds the missing
bdev_io->internal.in_submit_request flag to QoS submission path.
But QoS submission path doesn't handle nomem_io yet.
This patch makes QoS submission path handle nomem_io in the same way
as the normal path and extracts actual submission code into do_submit
function, so that further modification of the submission logic will
apply to both paths automatically.
Change-Id: I41fa88d239c3a2bd9783d812826e32e7c887818d
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455252
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Interpret volume->open() options as our vbdev_ocf_base struct.
This is used during metadata probe procedure, when there is no
vbdev configurations created, so we need to pass base structure
as option.
This patch is a prepartion for persistant metadata support,
and it does not change current behavior.
Change-Id: I0b7435df1692d8b3028931c6c9fc50d2d84b2557
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Use OCF per-volume UUID field to serialize bdev names.
This is going to be used during cache load to find out
which bdevs we want to attach.
Note that there is in fact "user_metadata" buffor that is
also stored in cache metadata, but we cannot use it
because its size is limited to 64 bytes.
UUID in OCF terms is not standarized
and is meant to be used to store custom immutable data.
This change preparation for persistent metadata support.
Functionality is not changed. (everything works the same way)
Change-Id: Ia9204fae29106f5b816d93a6771425a223d6c028
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455414
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change shutdown behavior such that now first bdev destruct() call
stops OCF cache instance.
Previusly, cache was stopped when single vbdev was referencing it.
This patch is related to persistent metadata support.
Without this change, every time a SPDK application is stopped,
only the last core is remembered in metadata,
because vbdevs detach by 1 by 1, each time updating the metadata.
Change-Id: I57db3f77db525177c024ee85e660a85aff2f8c31
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Fix instance function for OCF ctx interface.
This function is used for persistent metadata only.
Change-Id: I9583ea8eb21f07a3e9072a9552bed1c077cb7114
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Make init_vbdev() accept NULL as cache_mode if loadq flag
is set.
This is needed for load path because we don't know cache mode
before the actual load (happens later).
This change is related to persistant metadata support.
This patch does not change current behavior because loadq flag
is always false.
Change-Id: I42727eb841d87903c81bd5e6d51b6d4869ed9be3
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455411
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implement load path for OCF cache.
During load OCF will read metadata from cache disk and restore its state.
management_channel initialization is moved before cache load/attach part
because ocf_mngt_cache_load() needs it to read metadata.
This patch is a preparation for persistant metadata support.
Load path is never used yet because loadq flag is always false.
Change-Id: Iff6c1c52eae7b9f52812a8bd3d5ae6d6facedd60
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455410
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add new loadq flag that indicates if vbdev
should load cache instance from disk or start a new one.
This change is a preparation for persistent metadata support.
Functionality is not changed in this patch as the loadq flag is always false.
Change-Id: I1baac7f988e6eeadb4f365ba7bfab8019d55a753
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455409
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Do management flush during OCF shutdown to write all dirty requests to cores.
Dirty requests are relevant to WriteBack mode only.
Change-Id: I778a73ed8ab5659921f192f638027d513c239814
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Implement cleaner that is used in WriteBack mode.
Cleaner is a background agent that does synchronization
of data between cache and its cores.
Cleaner usually runs every ~20 seconds to perform cleaning.
The synchronization is a simmilar operation to OCF management flushes.
We need cleaner for WriteBack because only WriteBack mode
produces dirty data that cleaner needs to deal with.
Cleaner requires adopting trylock() because in current version
cleaner uses management lock when performs cleaning,
which may lead to deadlocks if cleaner runs on
the same thread as management operations.
WriteBack mode is fully functional after this change,
but persistent metadata support is required to use it for production.
Cleaner will run on management thread for now.
We plan to implement functionality of
chosing a CPU core where cleaner should run.
Cleaning policy is not configurable yet.
The default is ALRU with 20 sec interval.
Change-Id: I35aa7e00c44e0d7a77e64e60df1f66f20be03f55
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create new management channel and handle sharing between vbdevs.
This channel is going to be used for management operations
that produce IOs (such as flush) and also for cleaner.
Change-Id: Ieeed8454a7ab7459c86ac06ec6c0ece038bc928e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455272
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implement management queue for asynchronous management that is provided
in new OCF API. This is a neccessery step to be able to implement
metadata support.
OCF submodule was updated to get management queue functionality
It has to be done in this patch because OCF module will not work
otherwise.
Change-Id: Id19c2e5bd6a5d26fee41752b62720e408dc082e8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448619
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
OCF queue list needs to be managed synchronously.
This patch uses our own mutex to achieve that because we cannot rely on
ocf_mngt_cache_lock() as it may produce deadlocks when using
cleaner.
Alternative way would be to use trylock, but
we need to register a poller for it and do locking concurently
which doesn't seem to be possible in callbacks of io channel.
We agreed with OCF team that we are going to change this part
when OCF will deliver safe ocf_mngt_cache_lock() function.
This patch fixes a very rare failure on our CI that looked like this:
```
04:33:02 vbdev_ocf.c: 134:stop_vbdev: *NOTICE*: Not stopping cache instance 'Malloc0' because it is referenced by other OCF bdev
04:33:03 MalCache1: Core core2 successfully removed
04:33:03 MalCache1: Stopping cache
04:33:03 MalCache1: Done saving cache state!
04:33:03 src/ocf/mngt/ocf_mngt_cache.c:1576:2: runtime error: pointer index expression with base 0x000000000000 overflowed to 0xffffffffffffffa8
04:33:03 #0 0x7f3c52d54c26 in _ocf_mngt_cache_stop src/ocf/mngt/ocf_mngt_cache.c:1576
04:33:03 #1 0x7f3c52d5579f in ocf_mngt_cache_stop src/ocf/mngt/ocf_mngt_cache.c:1657
04:33:03 #2 0x7f3c52cbe9f4 in stop_vbdev /var/jenkins/workspace/NVMe_tests/nvme_phy_autotest/spdk/lib/bdev/ocf/vbdev_ocf.c:147
04:33:03 #3 0x7f3c52cbf4a0 in vbdev_ocf_destruct /var/jenkins/workspace/NVMe_tests/nvme_phy_autotest/spdk/lib/bdev/ocf/vbdev_ocf.c:216
```
Change-Id: Id6fafb444958f3becdc480e44762074c6c081e1f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450682
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Introduce cache context structure that is going to be used
for sharing per cache info. For example: management queue,
cleaner_channel, cleaner_thread.
Lifetime of this structure ends with last vbdev that gets unregistered
and NOT when cache stops because cache does not have to be freed
there.
Change-Id: I66252084d7efda92edd10fb737c8e9c8169b4f6d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451403
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adapt to new async API which was changed recently
This is a neccessery step to be able to implement persistent metadata support
OCF submodule was updated to get new API
Change-Id: I6bf9941ab0557981235c5be27686594a1b8ac3a0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move last step of register chain to the top because it is arguably more readable.
This should not be done in previus patch because it spoils the gerrithub diff.
Change-Id: If51642a32c5cf2a757ca20485d2347410653ca2a
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Use new trylock API to prevent lockups when using OCF cleaner.
Starting and stoping OCF bdev becomes asynchronous with this patch.
Using trylock means that we have to poll function that does locking each
time we want to initiate some operation on cache instance.
This is the reason why management functions become asynchronous.
Each management operation now has a _poll() operation associated with it.
_poll() uses trylock and continues when cache is locked.
Change-Id: I83b9fbe87c27433e178583411b87a68b8efaf58e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is a preparation for adopting ocf_cache_trylock() function.
Register OCF bdev path uses vbdev_ocf_mngt_ interface now
Register stays synchronous blocking operation in this patch,
but with adoption of ocf_cache_trylock() function,
register will be asynchronous, in which case we
want to use mngt_ interface.
This series of OCF patches will enable WriteBack support for OCF bdev.
There is a lot of preparation before we will be able
to actually implement WriteBack.
Dependencies look like this:
- WriteBack
- Cleaner
- trylock
- Persistent metadata
- asynchronous management API
Cleaner is a background agent that does synchronization
of data between cache and its cores.
Cleaner usually runs every ~30 seconds to perform cleaning.
The synchronization is a simmilar operation to OCF management flushes.
We need cleaner for WriteBack because only WriteBack mode
produces dirty data that cleaner needs to deal with.
Cleaner requires adopting trylock() because in current version
cleaner uses management lock when performs cleaning,
which may lead to deadlocks if cleaner runs on
the same thread as management operations.
Peristent metadata is functionality of OCF
that allows to restore cache state after shutdown
We need persistent metadata in context of shutdown
with some data being dirty which may only happen
when using WriteBack mode
Support for persistent metadata requieres
asynchronous OCF API because in current version
we will have a deadlock during metadata initialization
because it is required to be done on different thread
than cache initialization.
Change-Id: I45d84a5fa0c96581d522050dad186b06d489226e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455225
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we create AIO using the RPC interface, we can use the error
message to return to determine what exceptions have occurred.
Change-Id: I537f1a7d1053dcc27960de004fd0b4aea49919e9
Signed-off-by: Tianyu yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Submission logic was incorrect and completion logic was not
present yet. This passes now with multi-thread bdevio test.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia8ed1c123be511240d93503a2c5e501ccad445bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Adding these tests identified a small fix in the code under test
that is also included here. The compressdev 'produced' field
is unsigned and reduce is expecting a negative errno in the
callback.
Change-Id: I28ab11ee3ef54768a9d6ccd26282cf7dd022be43
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454806
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Two quick updates, support dequeueing more than 1 IO at a time which
is now more likely given that we can queue up compression operations
(others can come in qhile one is on the queue).
Dropped the max inflight value as it was in there as a palceholder
and now it makes sense to give it a sane value. Also updated the value
passed to reduce to signal an error.
UT for the poller will come in the next patch...
Change-Id: I14d6aeb98aa1e193c498e1549e37eca0e4c56c31
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When parent IO was splitted into several children requests, SPDK
may return parent completion callback with error status before
all the children requests are finished.
Change-Id: I63221a0ae1a5925a7fcd9744b4f5d8079c641252
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Had 0 hardcoded early on, this just uses the queue pair that
was pre-assigned to the compression bdev to use when interacting
with the cryptodev API.
Multi-threaded testing is coming later.
Change-Id: Iab8ea4e59169980933e9c81715baf4d41803b572
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The compressdev enqueue call will return the number of ops that
it was able to accept. By design this will always be 1 for our
implementation so check that to make sure.
If it is 0 then we queue the compression operation up and try
again after something is dequeued in the poller.
We will also queue if we can't get an mbuf or op from our pools.
Change-Id: I7285749b4a599d1ee265e3c3e16073f25c4d7469
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These two paths do the same thing, only spdk_bdev_io_get_buf tries to
allocate the buffer directly, while spdk_bdev_io_put_buf reuses the
returned buffer for one of the waiting requests.
Change-Id: I341a011f3a16a99de399c8b56fa73ccd9c7fe4fa
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add uninstall target to makefiles to be able to perform
reverse of install target.
Fixes#464
This patch adds 'uninstall' target to makefile.
'make uninstall' will remove spdk_tgt app, headers, libraries
and shared libraries from system directories defined by $DESTDIR.
Additionaly, if there will be any empty directories left after
this operation, they will be removed as well.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7b07fb4b81081d3914ff09165991fbe3a26b9067
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously whenever bdev module went through init>fini>init,
the async modules would trigger assert in spdk_bdev_module_action_done().
This was because starting value for action_in_progress was being
set only once - during registration of the modules.
With this change, modules are set as async just before their init start.
Change-Id: If177a8dc97812b1b264cb61d5ad202ce47fca3b5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Allow user to set timeout for poller in management operations.
Now also all management pollers have 5 sec default timeout.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ic75f2b150ef21ccd673b80aa84f16c9a24f90e32
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add stop function to management interface.
It is needed for error handling when execution has to be aborted early.
Example flow:
```
rc = op();
if (rc) {
handle();
vbdev_ocf_mngt_stop();
} else {
vbdev_ocf_mngt_continue();
}
```
This can be improved in the future, because currently, error
handling cannot be a management operation on its own (but should be).
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: I9ba528db8a9957ee561e5c1b5528b16bd143d5d8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Replace remove_base() function by smaller ones:
detach_cache(), remove_cache_bdev(),
detach_core(), remove_core_bdev()
This change is necessary for implementing asynchronous unregister using
trylock API.
Also introduce stop status variable because unregister path has changed.
Change-Id: I62599cafacdba685848bd7d32d3d5245907ee4a1
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reorder function for register and unregister path to make code more
readable.
Change-Id: I3479b231de1f6a4f84f9538f345e62eb73e6847c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452415
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
stop_vbdev() is management a function so it should be one of the steps
of unregister_path[]. It will have to be when stoping is asynchronous,
but right now it is not a hard requirement.
remove_base() no longer calls stop_vbdev() because that was actually a
dead code.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ie2d87da0fbe7807efea084181ea386b323e6b9d8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453653
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is just for readability.
Change-Id: Ic2a62ded78146c5b8736b6b7daebda1f3d5e3c47
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some data is freed but is cleared to zero just before the free.
They are not necessary and can be removed.
Change-Id: Ia4d789ef77c22059c412ee3c974ab0cf068d6c67
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In prep for next patch where queueing a comp op requires
the poller to call a func that was previously below it.
Change-Id: I0ba8a00e958e0766f866a0cd49d7b288ea4cbe73
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In working on a future patch to queue compress operations, I found
some corruptions in our mbuf pool stemming from an inconsistency
in using mbuf macros when constructing a compress operation and
how we allocated and freed both the pool and the mbufs.
This also fixes an issue that I hadn't addressed yet with freeing
chained mbufs. Use of the mbuf macro to free them instead of the
generic spdk functions takes care of that for us.
Change-Id: I7b29a0d740ab745574698c721d575d8a735ad5cb
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453028
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
I didn't test delete after making a bunch of channel changes so there
were some bugs in that path. Also as a drive-by I NULL out the
base_desc in vbdev_reduce_load_cb() to be consistent with other places
where I'm closing the base desc.
Change-Id: Iddd5dc704cde8eb7a6a5a3a8481e064a5c6c6d4e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452267
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On init, we pass reducelib the address of our params structure
so that the volume size is updated accordingly. On load however,
there was nothing to set the volume size so any load of a previously
created compress volume would result in a 0 length bdev.
Change-Id: I7643c79fa2e664115fd25df064ff1c74d82e358b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make examine work with asynchronous bdev startup.
We need to count references of bdevs that are being examined,
for the case when single cache bdev is referenced by multiple OCF
vbdevs.
The construct function is not in fact asynchronous yet,
but will be after adopting "trylock" API. Adopting trylock
requires a lot of changes, so this patch is really to split
implementation.
Change-Id: I6ac091f2dd48462e74aa89cf54acb0306c30673b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450033
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Traditionally, The C function name of rpc method "method_name" will be
"spdk_rpc_method_name", so make these function names consistent with
others. No behaviours changed.
Change-Id: Iac5396d4860bdbd78cba9031b4b6358161ec779b
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is the end of the patch series.
Make destroy_raid_bdev RPC Wait for completion of spdk_bdev_unregister
to the raid bdev by using callback function.
Change-Id: I3ed157ee71e3b8e6dc14b5b66732baba516eacce
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We have to process only the first call of destroy_raid_bdev RPC
for the same RAID bdev.
The existing flag destruct_called cannot be used for that purpose
because of the following reason.
destruct_called is set to true in both of
- destroy_raid_bdev RPC
- hot removal of any base bdev.
If destruct_called is set in destroy_raid_bdev RPC, destroy_raid_bdev
RPC must return immediately, but if destruct_called is set in hot
removal of any base bdev, destroy_raid_bdev RPC must go forward
with the current logic.
Hence add another flag destroy_started to struct raid_bdev and
use it.
Change-Id: Ifeefcaa1d289499342d8bb9bc162ded65e0368dd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450885
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Typically we just pass the bdevs supported IO types
for each of its partitions. But that doesn't work
for partitions with non-zero offsets since we can't
decode/modify the NVMe command in the bdev layer
to account for that offset. So just don't allow it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I38a766fcc39d5f068b31245bf1a47dbb79c8f8dd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was bdev-specific code that has been made generic
but we missed removing this "split" name when moving
the code.
We don't need a name here really - SPDK_ERRLOG will
tell us the file and line number of the error which is
sufficient.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d19b947c48407bfd99058b78325108c2957b391
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The product_name for raid bdevs was "Pooled Device" which was a legacy
naming convention that hadn't been cleaned up yet. This changes the
naming to be up to date with the current naming scheme.
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I9092a2b793e48bb9ec0349087a31fdcde17ed9cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
FTL doesn't have any kind of special package requirements.
It is getting pretty good traction in the community, so
let's enable it by default.
Note that we will disable FTL on FreeBSD. FTL uses
CIRCLEQ which is not available on FreeBSD. Let's not
spend time trying to get FTL to work on FreeBSD until
there's a demand to do so.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15525b6c4e6ee52f49adf74d55f9484fe08a6dcc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Also remove an unnecessary empty line and fix typos
Change-Id: I54e63e39dda23063c3fcbdd709cafec4278b130a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Mempools are based off of a ring structure which allocates its elements
as a power of two. It also only exposes n-1 elements to the user. So
when we create a mempool with 2^n elements in it, we have to allocate a
ring with 2^n+1 entries. By decreasing the number of elements in these
key mempools by 1, we can save a decent amount of memory.
Change-Id: I942c9dd4cf59096969bc2559fb46fd2084a07f09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add callback for construct function.
It is not asynchronous yet, but will be after
adopting asynchronous OCF API
Also adopt RPC construct call for this change.
This is done in this patch because (1) change is small (2) leaving
implementation as TODO still requires implementing a mock because we
decided that callback should be required rather than optional.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ib6a78e2caf34ac057d4da53ad5dda47163e8a089
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add vbdev as another argument in callback of vbdev management operations.
This is nice for async version of vbdev_ocf_construct() which uses mngt_
interface and creates vbdev structure.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: I8c88e0a881855b9f22fcf1f8174c888f3cfd6828
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452145
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We decided to name compress bdevs with COMP_ and then the name of
the underlying bdev so the RPC parm name was stale. Previously
hardcoded the path to PM for early dev so replaced name with pm_path.
Note that a sample create looks like this now:
rpc.py construct_compress_bdev -b NVMe0n1 -p ~/pm_files -d compress_isal
And that devs need to pay attention for the pathname they provide, its
easy to leave orphaned pm files around and they can get big.
Change-Id: Ifb5245c922461bbecec4bef266bdeb25e8b87f31
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Needs to be based on the compressed vol size which is smaller
than the backing io device.
Fixes issue 763
Change-Id: I917c98e86a0755e503d5ba3d4b6c02e42f9ed709
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, if the Bdev subsystem initialization fails, the initialization failed
module does not call the fini function cleanup resource.
However, null module use the 'spdk_io_device_register' and spdk_zmalloc to request
resources. In failed path, it will cause resource leak when exiting the app.
To avoid this, it will cleanup resources when module initialization fails.
Change-Id: Ib1a89e5238252d69b6e64ea02a0bd826661349a5
Signed-off-by: Tianyu Yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450105
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch won't fix issues related to the need for the latest
ipsec with 19.02 but it is needed for that patch to pass.
Change-Id: I8e2d984d85b355d88edfb9c90c159c8aa0a5362d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451788
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For bdevs that don't support zero copy, emulate the
API using regular read and write operations.
Change-Id: Iabd7ff474bf740b096f38bd47196987cbd89e915
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/416465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a ZCOPY operation to obtain buffers that represent
data regions on the backing block device.
Change-Id: Ie941c16ee051d0009e3888b52b8f41773bba47b3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/386166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev descriptors could be closed only from the same thread
that opened them. This restriction was suddenly introduced
at one point without making sure all the SPDK code respects
it. Vhost can still close descriptors from any arbitrary
thread and fixing that would require some more effort.
With this patch we remove the thread-specific assert from
spdk_bdev_close() and hence allow vhost to work properly
in debug builds. Vhost can still have a possible data
race with bdev hotremove notification, but let's get rid
of the abort() from the usual code path first.
Change-Id: I6fac66a5ebc907b1c5418fff618f0b64cd9b69f4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We used to wait only for those descriptors which
specified the hotremove notification callback. The
bdev could've been removed before the descriptor
was closed and the subsequent spdk_bdev_close would
simply segfault.
This patch modifies spdk_bdev_unregister to always
wait for all descriptors to be closed before actually
unregistering the bdev. This consolidates the bdev
unregister behavior for descriptors with and without
the hotremove callback.
Change-Id: I9b358209c6abd301b6fe8660e27bc6fa4ef485d6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Here assert(nvme_bdev->id == nsid) ,there's inactive case about nvme_bdev,
that code will continue. So need to skip the same case in remove_cb.
Change-Id: Idd3bd16d32e75f6d0e448b838676eb6f2ca5cfad
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
