This patch is for DIF check types.
Add enum spdk_dif_check_type to DIF library.
Add a field dif_check_flags to struct spdk_bdev and add
spdk_bdev_is_dif_check_enabled to bdev APIs.
Added enum is intended to improve usability. If no enum, the
caller will have to get raw data of flags and mask each bit.
Change-Id: Ia46a37a9684dc968dcc51963674f0a9963e0cd4d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is for DIF settings.
Add fields dif_type and dif_is_head_of_md to struct spdk_bdev and
add APIs spdk_bdev_get_dif_type and spdk_bdev_is_dif_head_of_md to
bdev APIs.
The fields dif_type and dif_is_head_of_md are added to the JSON
information dump.
Change-Id: I15db10cb170a76e77fc44a36a68224917d633160
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443184
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To support DIF, bdev will need to expose the following information:
- Metadata format
- Block size
- Metadata size
- Metadata setting (interleave or separate)
- DIF settings
- DIF type 1, 2, or 3
- DIF location
- DIF check types
- Guard check
- Reference tag check
- Application tag check
This patch is for the metadata format. Subsequent patches will do for the DIF
setting and DIF check types.
Add fields, md_len and md_interleave, to struct spdk_bdev and add APIs,
spdk_bdev_get_md_size and spdk_bdev_is_md_interleaved, to bdev APIs.
The fields, md_len and md_interleave, are added to the bdev JSON infomation dump.
DIF will be used only in the NVMe bdev module and the upcoming virtual
DIF bdev module first. But additional required storage by md_len and md_interleave
will be very small and they are simple. Hence add them to struct spdk_bdev simply.
Change-Id: I4109f6a63e6f0576efe424feb0305a9a17b9b2e8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443183
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds the support of read and write separate
bandwidth rate limits control with the configuration file.
Below is the example (in MiB) for the configuration section:
[QoS]
Limit_Read_BPS Malloc0 100
Limit_Write_BPS Nvme0n1 200
Change-Id: I0221516ce70c3fbb07b9e80c1c814ed5ba271c88
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/416672
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There are some patches to linux kernel for separating
out discard IOs that are written to /proc/diskstats and
the various /sys/block/*/stat files. The following additional
fields were added to these files:
Filed 12 -- # of discards completed
Filed 13 -- # of discards merged
Filed 14 -- # of sectors discarded
Filed 15 -- # of millisecond spent discarding
SPDK could provide these raw information to bdev_io_stat. Users
can use these information to calculate more states of block device.
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Change-Id: I517d67f0ff0159baf04e24732a8fd0ccefcb9c46
Reviewed-on: https://review.gerrithub.io/c/439057
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is to introduce the specific QoS related structure
and the enumeration for types of QoS rate limits. Later new
types of QoS rate limits can be supported easily.
Change-Id: Idb8d2e7627fd145bf2b0ddb296c968b6b068f48c
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/424459
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_bdev_close() must be called on the same thread as
spdk_bdev_open(). Further, the remove callback on the
descriptor will also be run on the same thread as
spdk_bdev_open().
Change-Id: I949d6dd67de1e63d39f06944d473e4aa7134111b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424738
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This RPC does not work for a lot of bdev types. For
example, NVMe namespaces and virtio scsi LUNs are not
explicitly constructed by an RPC - they are indirectly
constructed by an RPC associated with an NVMe controller
or virtio-scsi controller.
While here, remove spdk_bdev_config_json. It was
only created to facilitate this get_bdevs_config RPC.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I537166d8f91ab458bd2000859d74f7254bfc9c0a
Reviewed-on: https://review.gerrithub.io/424584
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Two extra fields are added to the iostat rpc.
1. io_time. The amount of time since queue depth tracking was
enabled that has been spent on I/O processing.
2. weighted_io_time. Incremented each time this bdev's queue depth is
polled by the amount of time spent processing I/O since the last polling
event times the measured queue depth.
Change-Id: Ie70489ec24dee83f3eeac8f4f813ec7074ff458f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419031
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Daisuke Aoyama originally contributed to istgt, the
iSCSI target in FreeBSD. The SPDK iSCSI code is
originally derived from that. Due to copy and paste,
some incorrect copyright attributions have been added
to other files that do not derive from istgt, so
this patch removes those.
It is doubtful, at this point, that there is any code
whatsoever that remains from the original istgt, but
we can revisit that at a later time.
Change-Id: I207e1e6b99d271e2f12690be90a96f7d0c113af7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This change includes a function to enable this feature on a per-bdev
basis. The new information stored in the bdev includes the following:
measured_queue_depth: The aggregate of the outstanding oparations from
each channel associated with this bdev.
period: The period at which this bdev's measured_queue_depth is being
updated.
With this information, one could calculate the average queue depth and
the disk utilization of the device
Change-Id: Ie0623ee4796e33b125504fb0965d5ef348cbff7d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/418102
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function is intended to be used when an spdk_bdev
I/O operation (such as spdk_bdev_write or spdk_bdev_write_blocks)
fails due to spdk_bdev_io buffer exhaustion. The caller
can queue an spdk_bdev_io_wait structure on the calling thread
which will be invoked when an spdk_bdev_io buffer is available.
While here, turn off error messages in bdev.c related to
spdk_bdev_io pool exhaustion, since we now have an API designed
to gracefully recover from it.
Also modify bdevperf as an example of how to use this new API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia55f6582dc5a8d6d8bcc74689fd846d742324510
Reviewed-on: https://review.gerrithub.io/415074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There are still a small handful of Doxygen warnings
remaining, but this fixes most of what was left.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3f8bf3efad2382faf1e6d09f85d802e0ce0bb23d
Reviewed-on: https://review.gerrithub.io/415857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change the checks to asserts instead. No callers ever
checked the return codes, and if they did, there's
nothing they can do to recover from an error status.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96d6804d61dfbf6030b3cc78ea59981301417421
Reviewed-on: https://review.gerrithub.io/415539
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be useful for some upcoming patches that refer to
functions that can submit an spdk_bdev_io.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If9b97d53e32d3198f3ef4f2d69f9fafea7a16bf2
Reviewed-on: https://review.gerrithub.io/415033
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function was logically out of place a bit - it split
up all of the functions that can submit an spdk_bdev_io.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ied601034d7cc73092b62537f1178337dafdb62c2
Reviewed-on: https://review.gerrithub.io/415030
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently this just includes the overall size of the
spdk_bdev_io pool and the size of the per-thread
spdk_bdev_io caches.
Later patches will allow configuring these via
INI config file and JSON-RPC.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7e235ee6d2d7123d8460eeacde999c7b51017c43
Reviewed-on: https://review.gerrithub.io/414710
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will allow multiple independent callers to request I/O statistics
without stepping on each other (previously the stats would be reset on
each request, which only works with a single caller).
This also means that we can now allow requesting stats while the VTune
integration is enabled.
Change-Id: Ia9d4d6fd37fa66b3671cd33b3183c90524f955bd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new function and its RPC caller. By using it, we can
get the statistics of all the bdevs or the specified bdev.
Meanwhile, with this patch, the open source tool 'sysstat/iostat'
can support for SPDK. The 'iostat' tool can call this function to
get the statistics of all the SPDK managed devices via the rpc
interface.
Change-Id: I135a7bbd49d923014bdf93720f78dd5a588d7afa
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Reviewed-on: https://review.gerrithub.io/393130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Future changes will rely on the ability to atomically
swap this data structure out.
Change-Id: I77b93252df63155692271b5665cc040cb83a33d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/409224
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds a new RPC method to configure QoS on bdev
at runtime.
For example:
set_bdev_qos_limit_iops Malloc0 20000 --> Enable QoS on this
block device with 20000 IOPS rate limiting.
Change-Id: I1ee8b313b769fb5a664820f4ba827e0230be4b5d
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Write information needed to recreate each bdev.
Change-Id: I3d2b24fd4aaa8b98ec558d864cc28b55a899452f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a generic way to get a UUID from a bdev.
For now, malloc and null bdevs generate random UUIDs, and no other bdev
types report a UUID.
Change-Id: Id9608c8c1b3ce3f1783e7f74bef96d44cd5d98a7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402177
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Unfortunatly not all bdevs produce its configuration in responce to
get_bdevs RPC call (eg nvme is producing tons of additional
informations). To not breake any existing scripts rename
'dump_config_json' to 'dump_info_json' instead of reworking those
callbacks. Next patches will introduce real 'dump_config_json' handlers
and API
Change-Id: If9c1a4ab864791b24a5f7d022e970cd65990ffc0
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401216
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Modified include/spdk/bdev.h and include/spdk_internal/bdev.h
add data members to capture statistics information. Modified
lib/bdev/bdev.c to calculate read/write latency.
Change-Id: Idcd55dd2e88c4b308e016f16ced53720256c79e3
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/390654
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Update all the header files in include/spdk to include
extern "C" declarations.
Change-Id: I43299f68e962d0df18c1b23fbbaa19bc924fcb96
Signed-off-by: Dave Boutcher <dboutcher@ocient.com>
Reviewed-on: https://review.gerrithub.io/390896
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the new one from io_channel.h.
Change-Id: I7bf6729caf6eeebcb58450a36119601957ad5da4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388290
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_bdev_nvme_io_passthru_md() is verified on QEMU NVMe
and will be verified on Cosmos mini OpenSSD.
Change-Id: Ib759b6b6095deaa4ae7cf746f3a241f678295605
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/387114
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
First this change moves spdk_subsystem_fini() to trigger on
spdk_app_stop(). This ensures that spdk_subsystem_fini() is called
before reactors are stopped in spdk_reactors_stop().
Finish paths for subsystems, bdevs and copy engine is now
asynchronous.
Each of those three mentioned have to make sure they are
asynchronous as well.
Only bdev that currently has requirement for asynchronous finish
are logical volume.
Thus the change in vbdev_lvol.c making it move to next bdev module
only after all lvol stores were unloaded.
Fio_plugin finish of bdev and copy_engine was removed for now.
Next patch in series adds it back with async support.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I80ee2d084f3d82c50bf1329e08996604ae61b1b3
Reviewed-on: https://review.gerrithub.io/381536
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Always start bdev pollers on the calling core.
This removes the lcore concept from the bdev poller abstraction and
simplifies the job of spdk_bdev_initialize() callers providing their own
poller and event implementations.
All callers except the NVMe bdev hotplug poller already used the current
core as the parameter. The NVMe HotplugPollCore option was undocumented
and unused in any of the tests or example configuration files, so it
should be safe to remove.
Change-Id: I93b466e1e58901b8785c40cbe296fa46c157850f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Closing the framework has to go through all subsystems
without failure, so return codes are unnecessary.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I53c9b4df12d2357e641130869f398b18637e6ff7
Reviewed-on: https://review.gerrithub.io/381681
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
First, improve packing of spdk_bdev_io. Move any
fields which must be zeroed into the first cacheline.
Also change type and status from enums (needing 4 bytes)
to int16_t which is still a far bigger range than
needed.
Next, modify spdk_bdev_get_io to only zero the
first cacheline (actually a bit less).
SPDK_BDEV_IO_TYPE_INVALID is also added, making it
explicit that 0 is an invalid value for the IO type.
Previously this was somewhat inferred.
There are still additional improvements that can
be made to this area - primarily combining
spdk_bdev_get_io() and spdk_bdev_io_init() into
a single function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1916d6d5db02c93622b9725ec1095148e3f384d8
Reviewed-on: https://review.gerrithub.io/377799
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add new versions of all of the I/O calls that take parameters in blocks
instead of bytes. These are intended to replace the old APIs, but
we'll keep them for now to preserve compatibility.
Change-Id: I85ab665c653e8c697016c628837d49aa0c3bfcd0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Allow passing the NVMe namespace optimal I/O boundary through the bdev
layer.
Change-Id: I27a2d5498df56775d3330e40c31bd7c23bbc77a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374532
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add functionality to the bdev layer to handle the nvme write_zeroes
function.
Change-Id: I0dadad273b28c16db5a2275f7d8d57e98253a8d3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372171
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This enables checking permissions - for example,
spdk_bdev_write will fail if the descriptor was not
created with write permissions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68b65a560f471f2e0f71a7f42cfa6689b911110f
Reviewed-on: https://review.gerrithub.io/369493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This includes file names, functions, #defines, etc.
There are still a few uses of "blockdev" outside of
include/ and lib/ - these can be handled later.
This preps for a future patch to consolidate vbdev
modules and bdev modules into just bdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70e575709ae1b0a116b08515fd38ae793de05377
Reviewed-on: https://review.gerrithub.io/369325
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Retire the old claim/unclaim semantics in favor of
open/close. Clients must now open a bdev to get
an spdk_bdev_desc, then pass this desc to get an
I/O channel.
This allows multiple clients to open a bdev,
although only one may open a bdev with write
access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d319f1278170124169a8a75fd791e926b3f7171
Reviewed-on: https://review.gerrithub.io/367611
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each virtual bdev now has a pointer to its base
bdev, and a base bdev has a pointers to any virtual
bdevs built on top of it.
Also add a new set of leaf iterators, to get only
bdevs that have no virtual bdevs built on top of
them. These iterators are now used by the bdevio and
bdevperf utilities, in advance of the claim/unclaim
semantics getting removed in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I669783764407cdd4920b5ee121959e2a58c8d436
Reviewed-on: https://review.gerrithub.io/367610
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Abstract these through the bdev API to break this
dependency on the event framework.
Change-Id: I108505bf27e94b2985f53d0a4dc0b847ae264d25
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/366340
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This breaks the dependency on the event subsystem logic.
Change-Id: Ic47a219bc1e272c3421b265f74bba959e1aa5f62
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365730
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Much like bdev modules inside the bdev directory,
add a subsystems directory inside of event. The subsystem
specific code for the bdev library is placed in to
a separate library in that directory, breaking the
strict dependency of the bdev library on the event subsystem
code.
Change-Id: I255941b823a9ec3e2d62f22a586414949d8ff5ad
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365055
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
