The following patches will aggregate multiple Data-OUT PDUs into a
single write subtask and we will not be able to use reqh->buffer_offset
to track the current offset of large write I/O to submit write subtasks.
On the other hand, each iscsi_task or iscsi_subtask is only read or write
Hence rename current_datain_offset of iscsi_task by current_data_offset
in this patch.
The next patch will use it to track the current offset of large write I/O
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I922582c5b9474a3c512f81d0f0425158a38a9a8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will aggregate multiple Data-OUT PDUs into a
single SCSI write up to 64KB. Any variable to accumulate data length
is necessary.
Hence add data_len to mobj and accumulate read data length into
mobj->data_len, and then refer mobj instead of pdu->data and
pdu->data_segment_len to submit write subtask.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6354534769e67c0fd995bbc3c2b4a80d21a23915
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Wrap an operation to get a data buffer from mempool into a helper
function iscsi_datapool_get() and wrap an operation to put a data
buffer to mempool into a helper function iscsi_data_pool_put().
Use inline for both functions.
Besides, as a minor fix, remove duplicated file inclusion between
iscsi.c and iscsi.h.
7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia3005dffaa93a6bca16f19bb467fb5b64ae1aad2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add crc32c to struct spdk_iscsi_pdu and initialize it by SPDK_CRC32C_INITIAL,
and then use it as the initial value of _iscsi_pdu_calc_data_digest().
Separate finalization of crc32c into _iscsi_pdu_finalize_data_digest().
Move the definition of related macro constants from iscsi.c to iscsi.h.
iscsi_pdu_calc_data_digest() is used for read too. So setting
pdu->valid_data_bytes before calling iscsi_pdu_calc_data_digest()
for read.
Data split will be supported only if DIF is disabled, and hence
DIF case is not changed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9d24f605fd0d452782e17695b613cd2f63d2e42f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will want to aggregate multiple Data-OUT PDUs
into the same data buffer, but it will be 64KB at most.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I72eabbeae0b027c2fbff2a5837d180b06b0a1b49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6418
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will change the handler for Data-OUT PDU to
submit subtask only when 64KB data is read or F bit is set.
Previously, we had created a subtask when processing header and
before reading data segment. Creating a subtask beforehand is not
convenient for the following changes.
Hence create a subtask after reading data segment.
If LUN is removed while processing the Data-OUT PDU, the corresponding
primary task will be terminated by iscsi_clear_all_transfer_task(),
and any subtask completion is not sent to initiator. Hence we can
reject the received Data-OUT PDU safely.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb6d6988676080b458b31d12fef065f3c1de0cb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The hotplug lib can be used for pcie devices
such as nvme, virtio_blk and virtio scsi.
For the sigbus handler, there is only one in a
process and it should handle all the devices.
And align nvme to the hotplug lib
Add the ADD uevent support for allowing the
device hotplug.
Change-Id: I82cd3b4af38ca24cee8b041a215a85c4a69e60f7
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5653
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Introduce new utilities NVME_CTRLR_ERRLOG, NVME_CTRLR_WARNLOG and so
on to output the ctrlr's identification at different log levels.
For RDMA and TCP, the subnqn will be output and for PCIe and custom,
the traddr will be ouptput.
Change-Id: I81a112463bf752999aa1fe4e0c867d88e09a2f64
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7057
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This can be handled in a cleaner way by having the sock group
create/close operations take an extra reference.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id701b6dd9a19b01cd40e0d95eb870aef977eea99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
added to a group
The process of adding a socket to a group may, in some scenarios, change
the placement id.
Change-Id: I879d9641099d86978ede5d5e2be1a72eda65a79b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also fix the comment. It's never going to make sense to add a socket
to a group twice.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id4845b77114aef32bbe4ea0e53d2e1fde8e116f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7204
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Using nvmf_tcp_destroy() would destroy ttransport->lock, which hasn't
been initialized by that point yet.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie9ced97ef520236dddaa70453b6807e8382ce534
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7235
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be useful as the same purpose as
spdk_io_channel_iter_get_io_device() and will be used in the
following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id45f5980c65543703b91df2afeb47448232fe503
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7237
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When a request is submitted, it may have incorrect iov
alignment that doesn't fit PRP requirements. In the
current version an internal function fails such a request
and returns a NULL pointer. This is mapped to -ENOMEM
error which is returned to generic bdev layer where
such a request is queued in a "nomem_io" queue and
later can be resubmitted. That is incorrect and such
a request must be completed immediately. To fail the
request, we need to differentiate between -ENOMEM and
other cases, so we pass a pointer to a result to
local nvme functions
Change-Id: I7120d49114d801497a71fca5a23b172732d088de
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7036
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function will be used the next patch, current
behaviour remains unchanged
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie74c7395f67a08b0cac018eb5114f358a6b583cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7092
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The max_io_size transport option should be a power of 2 and be >= 8KB.
Max data tranfer size is defined in NVMe-oF spec as 2^(mdts cmd field) * 4KB.
Mdts cmd field is calculated as spdk_u32log2(transport->opts.max_io_size / 4096),
so max_io_size < 8KB results in mdts=0, which means no size limit (according to spec).
User can set max_io_size = 0 explicitly to allow no size limit.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: Id88a77efce5f217e1fc7750f61c0bd330aaa3791
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6384
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The dbdf format is xxxx:xx:xx.x and with the wrong
format the rte_devargs_parse always fails.
Change-Id: Ia34bc5e68f6401bb25907d5d07c65636b4f491b5
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7140
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
We can send a message to repeat subsystem pause
and free a context that will be used later
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ia5e8b0ff43f5e38bd8e659a8a64d42926e1d3c6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6661
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
With this change, each polling group will use one
accel_engine channel. This change will be more suitable
to utlize the underlying accelerated device.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ibab183a1f65baff7e58529ee05e96b1b04731285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7055
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Actually we already do this when removeing a memory region, but
the check for it is too strict, we should unmap queue pairs when
the queue pair is in the memory region.
Change-Id: Ia646a0255e32ecdd0a70537a8011ce622eb59195
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6861
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The error response should be processed at the beginning of this
function.
Change-Id: Id583951c82981cf58984ab68b23ad6f7ea80cd3f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6859
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When starting VM, there are error logs such as:
vfio_user.c: 510:acq_map: *ERROR*: Map ACQ failed, ACQ 3ffde000, errno -1
vfio_user.c:1043:map_admin_queue: *ERROR*: /var/run/muser/domain/muser1/1: failed to map CQ0: -1
vfio_user.c:1103:memory_region_add_cb: *NOTICE*: Failed to map SQID 1 0x3ffd8000-0x3ffdc000, will try again in next poll
This isn't the error case, because when the Guest memory hot add/remove from QEMU, vfio-user
target will stop and unmap all queue pairs and remap them again, so let's use a more friendly
log instead.
Also use a notice log when adding listener.
Change-Id: Iaa4dc29e02523b5e85ec716d200ec355f8a575ed
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6650
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add support in bdev_zone.h for getting the maximum zone append data
transfer size.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I61203e64d51601232c6578a090fa52975364c1f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6910
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The specification for Maximum Data Transfer Size (MDTS) says this field
should include the length of metadata, if metadata is interleaved with the
logical block data. However, some drives can support MDTS without counting
the interleaved metadata, so for this case SPDK will only use data length
without interleaved metadata length.
Change-Id: I29920a25885699e2689be043b87122367be0e416
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Although the value stored to 'rc' is used in the enclosing
expression, the value is never actually read from 'rc'
Fixes#1860
Change-Id: Id1001552e635968e373cad0fd27d7bda41d887cd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7082
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When param len > 0, param data must not be NULL.
So we add a comment to make it clearer.
Change-Id: I053c3e45ddb8fa23fb67ce899d32dadd8e286946
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the polling group check. Because at this moment,
the qpair is not added into a polling group. If we do
not remove it, we will never enable zcopy feature for
I/O qpair.
And in sock implementmentation, we already fixed the zero copy
handling if a socket is not in a polling group. See
posix_sock_flush function. So we can fix this issue if we directly
remove this check.
Reported by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I969936c4b6c7f13cbfa4d6eb479010c53f3e384a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Add print to confirm how groups/queues/engines are being
programmed based on the init RPC used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic9462c19c6899478a803433f90d9db9249dd5ca1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK has added APIs for registering externally allocated
memory regions. Use them instead of doing our own thing.
We have to postpone spdk_mem_unregister call in
memory_hotplug_cb() because SPDK mutex (g_spdk_mem_map_mutex)
and DPDK mutex (memory_hotplug_lock) may overlap
and cause deadlock when one thread is calling spdk_free()
(locks memory_hotplug_lock first and then tries to lock
g_spdk_mem_map_mutex) and another one is calling
vhost_session_mem_unregister() (locks g_spdk_mem_map_mutex
first and then tries to lock memory_hotplug_lock).
Change-Id: I547b4ffc3987ef088a1b659addba1456ad760a71
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3560
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: The default value of placement_id in spdk_sock
should be set to -1 in spdk_sock_connect_ext. If we still let it to 0 and call
sock_get_placement_id for the spdk socket used in the initiator side,
we will never get the correct placement_id when enable_placement_id configuration
is configured, because we will always get placement_id = 0
instead. And the same comments in spdk_sock_accept function.
And this patch also change the judgement of placement_id in other related places.
PS: Why we need to explictly set default placement_id = -1, because when use
"enable_placement_id=2" for the socket, placment_id=0 is a valid value.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9fcc3a1c6a5007c22d11da5aeed0022577652a76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
nvmf_subsystem_remove_listener RPC handler may fail to remove
the listener (e.g. it doesn't exist) but in eror case we
spdk_nvmf_transport_stop_listen_async and send an error
response. In a completion callback passed to
spdk_nvmf_transport_stop_listen_async we try to send a
response again but the response handler had already been
released and we dereference a NULL pointer.
The fix is to skip spdk_nvmf_transport_stop_listen_async
in error case and continue with the subsystem resuming.
Fixes github issue #1821
Change-Id: I8d96b943cca25d9f95d19e8ea600242f019e6b21
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6699
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Updating thread stat directly in spdk_thread_poll()
will cover the time spend in msg process in interrupt
mode.
Change-Id: I9b71790281f10fb784ef4fd4059c41438bbaabac
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6722
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
thread_interrupt_msg_process is registered to thread's
fd_group, so it will be called inside spdk_thread_poll.
Since spdk_thread_poll will set/restore tls_thread,
there is no need to set or restore it again here.
Change-Id: Ida10c736ef904ff975eeb42fd0cccad9fd8317cf
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6720
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move get_rusage directly into reactor_run(), then both
poll mode and interrupt mode can check rusage info.
Change-Id: Id5926752cfb19c13cb969fbfbb35f643e5d49d9a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
In interrupt mode, reactor spends its valid cpu cycles
to process registered thread interrupt function. So we
can count idle_tsc and busy_tsc in it, and update
reactor's last_tsc in it.
Change-Id: I65f4ae7d3b1e5c7c5c06937d6855f5d1b5c0349f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When we iterate qpairs that belong to a subsystem
and try to disconnect them, there is a chance that
some qpair can be disconnected on transport level,
e.g. the initiator may receive a disconnect for
the first qpair and disconnect others. That may lead
to a dead loop when we call spdk_nvmf_qpair_disconnect
with a callback, the callback is called immediatelly
and tries to disconnect the qpair again.
To solve this problem, move part of nvmf_poll_group_remove_subsystem
function to another function nvmf_poll_group_remove_subsystem_msg
which disconnects all qpair at once without any callback
and calls itself via thread_send_msg untill all qpairs are
disconnected.
Fixes github issue #1780
Change-Id: I1000cda73e6164917fc13f7f374366af90571b99
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6597
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The NVMe Zoned Namespace Command Set Specification has, in addition to a
Max Open Resources limit, a Max Active Resources limit.
An active resource is defined as zone being in zone state implicit open,
explicit open, or closed.
Create a function spdk_bdev_get_max_active_zones() in the generic SPDK
zone layer, so that this limit can be exposed to the user.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I6f61fc45e1dc38689dc54d5649c35fa9b91dbdfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6908
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This change refactors the way nvmf_get_stats RPC works.
The RPC layer passes JSON write context to custom dump function defined within transport ops.
The RPC layer no longer needs to know the structure of transport poll group statictics.
Functions and structures used in the previous flow have been deprecated and will be removed.
JSON returned for RDMA transport should be the same as before this change.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: I03308c45be120793d316bf79814a1295afd9fb95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6681
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Current update_core_mode is started from the next
core of the master core.
For futher's new scheduler, starting from master
core is required. This change won't impact current
schedulers' behavior.
Change-Id: Ibffd2c93a4288b5e87945ae523ccba88091c4031
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_nvmf_tgt_listen() is deprecated, so moved
the remaining instance to spdk_nvmf_tgt_listen_ext().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I32b54e99f83fa10f1074f80aad82bb0608c9ae11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6630
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This API has been deprecated since SPDK 20.07,
see commit (b2947f52).
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idb45906c81ea5682c6a67def0265910266d861b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This patch refactor the pdu sending logic with the async manner,
then if the group contains the accel engine, we can use it.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I2d669c0a3255d7a8898441e406906add2f3a3556
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6759
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: To setup an accelerated function callback
for created spdk_nvme_poll_group. In this patch,
we just create the interface. The real usage of this
call back will be provided in the other patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I0d936aa4eba4dbfcc0137942156b9f2919eb5b78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6758
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
