This will allow us to use this RPC to detach only specific
paths from controllers.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib52e38aa7d4ea096418a6dc0328481c2e8db6c54
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3070
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In SPDK iSCSI target, portal group works almost as identifier of
portal.
To support iSCSI login redirection, we need to have two types of
portal groups, public and private portal groups.
We need portals of public portal groups to redirect to a portal in
a private portal groups at login via temporary login redirection
funciton, and we need to make SendTargets return only portals in
public portal groups.
To do these simply, we mark primary or secondary portal group expicitly
at its creation by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iccf87a4b9dd1f4a8fbb857a399b8f2dbc7c0b3ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3491
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
TCP delayed ACK can be disabled or enabled by enabling or disabling
quick ACK, respectively.
The recently added spdk_sock_impl_opts is helpful for sock library
to control quick ACK.
Hence this patch adds and uses an option enable_quickack. The option
is effective only for the POSIX sock module.
We have spdk_sock_opts now too but spdk_sock_impl_opts will be better
for this case.
This option is not supported on FreeBSD. FreeBSD users can set the
option globally via sysctl if desired.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic89620267acce5872dc8ecaf7a99bb70ae97e993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3603
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This allows us to avoid creating a separate rpc just for multipath TRIDs.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4e83167eaf16e50a72efbd513333a4d09c52be61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2884
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The operation to assign the created qpair to a poll group has been
moved from event library to nvmf library. Update the corresponding
part slightly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I80b9b8257b84ba92004baa36a057d1a8cee387bb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3623
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This parameter is now a string, not an integer.
Fixes issue #1518.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c187af69d7cdf1f60573a07bc1bacb58b5b78b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3581
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Zero copy send can cause performance degradation with small
payloads. This patch adds an option to disable it if required. By
default zero copy is enabled.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I14f2b21ad375e770cb08f850360898bac675b351
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Receive pipe reduces number of system calls and gives significant
performance improvement with kernel TCP stack and relatively small IO
sizes. With user space TCP/IP implementations there are no system
calls and double buffering introduced by pipe has negative impact on
performance. Receive pipe remains enabled by default.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ic5ddee42293df2c233ba7ffbe6662de7917ac586
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch only includes the basic framework for batching and the
ability to batch one type of command, copy. Follow-on patches will
add the ability to batch other commands and include an example of
how to do so via the accel perf tool. SW engine support for batching
will also come in a future patch. Documentation will also be coming.
Batching allows the application to submit a list of independent
descriptors to DSA with one single "batch" descriptor. This is beneficial
when the application is in a position to have several operations ready
at once; batching saves the overhead of submitting each one separately.
The way batching works in SPDK is as follows:
1) The app gets a handle to a new batch with spdk_accel_batch_create()
2) The app uses that handle to prepare a command to be included in the
batch. For copy the command is spdk_accel_batch_prep_copy(). The
app many continue to prep commands for the batch up to the max via
calling spdk_accel_batch_get_max()
3) The app then submits the batch with spdk_accel_batch_submit()
4) The callback provided for each command in the batch will be called as
they complete, the callback provided to the batch submit itself will be
called then the entire batch is done.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4102e9291fe59a245cedde6888f42a923b6dbafd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2248
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows users to configure the number of
connection requests outstanding to an rdma port
at once.
RPC included.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8a2bb86b2fb7565cb10288088d39af763b778703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3097
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_app_start no longer creates threads and appropriate
docs should be updated.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I29736e26faa6a3250a6019e90d9734ff04f6e1fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/518
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Dual-cast copies the same source to two separate destination buffers.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icadae34a75c35e2db672a193287b147416012a5a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Automatically place binaries produced from the app directory
into build/bin. This matches with the output in build/lib
that already exists.
Change-Id: I13cd2da71d2f88592e22308fe8a907bf458458b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2379
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This user guide details the SPDK library structure,
naming and versioning conventions, and instructions for
use.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I1a7ec422730ba169662de76847c77b9433cc3b04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2404
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This parameter describes the number of admin and IO
qpairs while admin qpair always exists and should not
be configured explicitly.
Introduce a new parameter `max_io_qpairs_per_ctrlr`
which configures the number of IO qpairs.
Internal structure of NVMF transport is not changed,
both RPC parameters configure the same nvmf transport parameter.
Deprecate max_qpairs_per_ctrlr in spdkcli as well
Side change: update dif_insert_or_strip description -
it can be used by TCP and RDMA transports
Config files parsing is not changed since it is deprecated
Fixes#1378
Change-Id: I8403ee6fcf090bb5e86a32e4868fea5924daed23
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Explain the bdev_auto_examine parameter of the bdev_set_options rpc.
Add bdev_auto_examine parameter for the bdev_set_options
in the python rpc client.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I268cd5c01129180467967c2ebfffa7c3ba7e5b1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2580
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
remove only the spdk_ prefix from static functions in
the above libraries.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I59ce032c3312fa73f30c133fd62e603c1eee2859
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2365
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Created Linux AIO bdev disk with 8192 block size can not work
on some guest OS, i.e. CentOS 7.x, and may stuck when guest OS startup.
So applying block size smaller than or equal to 4096 bytes may be a more
suitable and common choice for most guest OS or cases.
Signed-off-by: Dayu Liu <liu.dayu@zte.com.cn>
Change-Id: I0f2ce4e1fd19f337c3128ad3511823c984f0aac8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2489
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Point to actual release, rather than alpha.
Change-Id: I8a93ac94110e3962d4291a221c8b5d489690e771
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1808
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The function bdev_lvol_create and bdev_lvol_resize actually passes in the size parameter
as bytes instead of magebytes.
Signed-off-by: Haichao Li <haichao.li@arm.com>
Change-Id: Ic47e799fb461c51816e696f2b03aa41ac517d421
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1906
Community-CI: Mellanox Build Bot
Reviewed-by: Yibo Cai <yibo.cai@arm.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There was difference between finally uploaded file and one in docs.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2c33b6d1b2b95ef1c5995c7a259e1ca0208b73ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2241
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The IOAT docs are pretty limited so what's here just mirrors those.
More documentation on the library as well as the module will be
provided as an ongoing activity.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I28b13733f034fe117a4ea21983ce0418a427dd51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1925
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of creating an allocator where the driver manages the space,
now, since using the CMB for queues and data has already been
disallowed, just create functions to map and unmap the entire CMB.
The user can manage the space.
Change-Id: I023994deda3b517e14d2ba464c7375bf22b58456
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/785
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Add section about how to run Kata containers with
SPDK vhost target into docs/containers.
vhost-user-blk related patchset was already merged
into Kata containers, and was released from version
1.11.0-alpha1.
Change-Id: Iacc216d67e1531432512ead8fefa70954578bd9b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1663
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Currently run count of poller has been incremented per execution.
It will be helpful for us to know how poller is busy by adding busy
count which is incremented only when some work is done.
spdk_thread_poll() has used the same timestamp in it, and so this is
the maximum we can do for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0adfbf9a62c959499978124ecc97d377c96c3769
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the idea of thread CPU stats, add reactor CPU stats.
Reactor CPU stats accumulates run time of spdk_thread_poll() calls
to idle TSC or busy TSC according to their return codes.
Add necessary unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1a1391e79d74387c68f1651a61c8900e4c6faf66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
MD014 - Dollar signs used before commands without
showing output.
This rule is triggered when there are code blocks
showing shell commands to be typed, and all of the
shell commands are preceded by dollar signs ($)
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Icbb2e2c0415af08351cddf2caac33edab5b694c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Collect elapsed time of each SPDK thread and add it to output of
framework_get_reactors RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e2f0487de81720327428cda5738284a4ce2c557
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
