We will have ANA state per listener and per subsystem. On the other hand,
NVMe specification defines ANA state per controller.
However, it is possible that I/O qpair and admin qpair are different
listeners on a single controller.
Let's check if I/O qpair is on the same listener as admin qpair if
ANA reporting is enabled.
The case that I/O qpair is on a different listener from admin qpair
is not usual and so the purpose of this check is just to guard SPDK
from any unexpected behavior.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb8d255de7f998e45a59a120c2ed5803258873f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4026
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Find the subsystem listener whose trid matches req->port->trid when
creating a controller, and store it in the controller.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iea343b8d8ae827b554df2245b67aed113469c592
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add trid to struct spdk_nvmf_qpair and initialize it at initialization.
admin_qpair->trid will be used to get the corresponding
subsystem_listener via nvmf_subsystem_find_listener() and add it to
struct spdk_nvmf_ctrlr in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d1a41aede60de88747eff16c7e04f63d0702596
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4009
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The new function () will be used in the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I788cfb38d75c3f1f64e1754912b776a80f0f1be8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4007
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nblocks is zero based, so read path was missing the increment.
NVMe device that cuse represents can be of any block_size,
so rather than hardcoding 512 - actually verify it.
Both paths didn't request enough of a buffer from cuse.
Reported-by: Niklas Cassel
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I228dc2572bc94ecbcb913e950d912a7ab5be9434
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4037
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch does not alter functionality, just moves
around where cuse_device and block_size is determined.
Next patch will fix both paths.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5a827b5b4ab080b2aa0f76f5cdcbcb177b38b474
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4036
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Socket message VHOST_USER_SET_VRING_ENABLE will use number of
vring entries as input parameter to indicate the vring is
enabled or not, previously the flag in vhost-user library
wasn't checked before commit d0fcc38f5
"vhost: improve device readiness notifications", so here
we also use correct filed set in SPDK.
Fix issue #1583.
Change-Id: If5ac8a4ba31bdecbb5a64b736346c99e4be0f4b6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3989
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We stopped the poller to early, so we were not able to
reap all completions on ibv CQ, so RDMA qpair was not freed.
This patch stops the poller when all references to poll group
are released (all qpairs are destroyed)
Fixes#1578
Change-Id: I15c1697db13aef9da7567c7312476306c3ee1d62
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3962
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When tested on Linux 5.8 kernel and configure spdk
with debug mode (--enable-debug), and test SPDK NVMe-oF
tcp transport, and we see the coredump in sock_map_release
with the following statements:
assert(entry->ref > 0);
After debug, I can confirm that the placement_id value got
from the following function (sock->net_impl->get_placement_id)
changes.
It means that: When the sock is added into the poll group
(spdk_sock_group_add_sock), we get the placement_id (named as
Value(begin)); and when the sock is removed from the poll group
(spdk_sock_group_remove_sock), we get the plaemednt_id on
the same sock (named as Vaule(end)). I found that
Value(begin) ! = Value(end).
So our solution is for a socket, we will get placement_id once,
then we can solve this issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia1d0cf39247b53410260561aca5af38130cc0abb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3983
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We will use it earlier in this file in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I554f2073185d466bd0b4e98bdeec721f763c1b44
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3969
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When claiming clusters as part of blobstore initialization
or recovery, just call spdk_bit_array_set directly rather
than going through the bs_claim_cluster function. We will
be modifying how runtime cluster allocation works so need
to separate the two use cases. This code is very small so
inlining it has minimal code impact.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaaa1c817e57b4a2eea62eb4683407364bac1fcc0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3966
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These functions were added during FTL development and
are more efficient than the roll-your-own implementations
blobstore had previously.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie09e5c305e6e171af0258e805f2aac3b88822b5e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3965
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow toggling log timestamps on and off by adding new RPC call.
Change-Id: I34c84bf89fae352ade266fbf7fd20594ff67bced
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2024
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove assert and add exit codes instead. That in non-debug mode, these
could lead coredump. We don't want the vhost target be crashed after
recieved invalid commands.
fixes issue: #1575
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ifef6d8f9c32150213bc2c80787e92d428d4c49c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3951
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
cpumask can be changed by spdk_thread_set_cpumask()
during the time that event takes before it arrives
on _schedule_thread() function, which would make the
function assert(false), even though that is ~ok~.
Currently, that can happen right after thread is created
or between two successive calls to spdk_thread_set_cpumask().
But most importantly, it will constantly happen if we
introduce rescheduler.
This patch just disables the check for now.
Change-Id: Ie6dfe22d6eff2c908c367d1311436cc6769a6960
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3905
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the PDU receive handler processes the header of the logout request PDU,
conn->is_logged_out is set to true.
However, if conn->is_logged_out is true, conn->pdu_recv_state is set to ERROR
before the PDU receive handler completes processing the logout request PDU.
Then if conn->pdu_recv_state is ERROR, conn->state is set to EXITING
after returning from the PDU receive handler.
Response PDUs are sent asynchronously now and may not be sent even after
returning from the PDU receive handler.
On the other hand, outside the PDU receive handler, the current connection
is closed if conn->state is EXITING.
Hence logout response PDU may not be sent to the initiator.
For the case that the initiator logs out and then reconnects when receiving
asynchronous logout request, missing logout response is critical
because initiator waits until receiving logout request and gets timeout.
This patch moves the check if PDU comes after logout to the place
just after getting a PDU header.
At the new location, data segment of the PDU is not received yet. But
logout request PDU does not have data segment and initiator will not
send additional PDU after sending logout request PDU, and by this patch,
iSCSI target will continue to stop receiving any new PDU after processing
logout request. Furthermore, even if there is any remaining data in the
kernel buffer, the kernel will discard or flush it when closing the socket.
Fixes issue #1571
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9554f4d54f3db80bf86abd6bffe81bac8c234531
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3928
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
ANA transition time shall be non-zero if controller supports ANA
reporting. Linux NVMe host sets this value to 10, and we don't
have any reason to change from that.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I61396695dacf47fad40e3cea3311e555729d9e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3909
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Registration macro now generates function based on driver's name.
It allows to have multiple registration within single source file.
Similar pattern is used e.g. by SPDK_NVMF_TRANSPORT_REGISTER.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ied0887e8dae7fe9ca1517313be5eff8f218b7e98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3895
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used in another place later.
This patch is part of a series aimed at improving recovery
when we are fail to change the subsystem state.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I24bfbeb3d006584003164540d6ede540dbcafa86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3392
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
The loop here was counting the bytes in the cpus array,
but the lcores are represented by bits.
While here, add a unit test that exposes this bug and
demonstrates it is now fixed with this patch.
Fixes#1570.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3a1fc48a8085254f41587e3b3d5d732154b90134
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3931
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow applications to understand why
they were unable to connect.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic04c7e72098c6ec1823de7d6a07d90150ef5ac20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3836
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a bdev_examine_allowlist_free function, which releases the members
in g_bdev_examine_allowlist. Invoke it in bdev_mgr_unregister_cb.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I47faf6959066da6679716b2f2abfab8ac8b8dd79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3880
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently when the uevent processing code finds a non-uio/vfio
uevent, it just stops its loops and returns. This means that if
there are a lot of non-uio/vfio uevents, the netlink socket buffer
can build up until its full because only one non-uio/vfio event
gets drained per spdk_nvme_probe() call (which may be very
infrequently).
So modify parse_event so that it does not indicate error when
a non-uio/vfio event is found.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8a40f71ee89d597ce46129eac889fe5b7ef5171
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3876
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This ensures we don't send a nopin immediately after
a connection is established, in case the nopin poller
fires before the connection reaches full feature phase.
Fixes#1441.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieba9476bec0e9b7f85e60b9113ae8364eda5bda3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3902
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The md_page alignment is not really required for md_page
buffers.
Allocating 4k aligned buffers all the time, causes memory
to be heavily fragmented. Due to DPDK keeping track of the
allocation in the same DMA region as the allocation themselves.
Removing this alignment requirement will help DPDK when searching
for the right part of memory in the heap.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reported-by: Mike Cui
Change-Id: If2f4ca2be38d432d5740f6145b5e0ff46237806b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3853
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We should make nvme_tcp_ctrlr_connect_qpair always return
negative value if this function fails.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I457e704e39d7a3acd298fd48e89e8ea51e2ed4ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3809
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The specification says it will return INVALID FIELD if the NS
is in inactive state.
Fix issue #1551.
Change-Id: I1b32f023ed665d410f4705e439068699e2b2f8de
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3860
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Failed qpair will be destroyed on generic nvmf layer during handling
of error code returned from spdk_nvmf_poll_group_add.
The current approach leads to heap-use-after-free.
Change-Id: I99331150fa36a3c3c18176589afb973dee449b3a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3538
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The one large global mempool was a waste of memory for apps that
don't use the accel framework as its always allocated a pool sized
to handle a heavy load with multiple threads.
Instead move to a per channel list of just 1024 tasks greatly
decreasing the memory footprint but still able to scale as more
threads are added.
Also renamed all accel_req to acccel_taak and simply task to
accel_task as this was being touched anyways and not consistent.
fixes issue #1510
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0e93ca6270323e2df4b739711c5d9b667a52e1eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3740
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently rdma acceptor handles only one ibv event per poll
Taking into account the default acceptor poll rate (10ms), it can
take a long time to handle e.g. LAST_WQE_REACHED events when we
close huge amount of qpairs at the same time.
This patch allows to handle up to 32 ibv events per acceptor poll.
Change-Id: Ic2884dfc5b54c6aec0655aaa547b491a9934a386
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3821
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is an oversight that can cause issues with looping
through the list if we end up allocating the same qpair
twice.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I513ea35398f4b724366c21be144531fbfbdb4347
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3835
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We only create one spdk_blob object for a given blob, and just
increase the ref_count if it is opened multiple times. bs_open_blob
would do the lookup for existing opened blobs.
But if the blob is opened again, before the previous open operation
has completed, we would end up with two spdk_blob objects for the same
blob.
Solution is to do another lookup when the open operation completes.
If we find the blob, free the one we just finished opening and return
the existing one instead.
Also added unit test that failed on the existing code but passes now
with this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reported-by: Mike Cui
Change-Id: I00c3a913b413deddf06f0b63f7a669efb2b5658f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3855
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
pctrlr->cmb.mem_register_addr and pctrlr->cmb.mem_register_size
are assigned after spdk_mem_register.
if spdk_mem_register is failed , ctrlr_map_cmb hasn't been executed.
they are not be used.
So remove them.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I3d1996eee8b5260b79c4c3e0a2e1d376da2343b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3856
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
SPDK poller uses microsecond as the input parameter, so we need to
change the correct value when opts.association_timeout is expressed
by millisecond.
Change-Id: Ia674f0115ea176b998e4c0c70b8ce75b28984701
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3861
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After supporting ANA reporting by default, Linux kernel 5.3 reported
error when parsing NVMe ANA log. The newer kernel fixed the issue
but we should optionalize ANA reporting feature to avoid error for
Linux kernel 5.3 or before.
Add a bool variable ana_reporting to struct spdk_nvmf_subsystem
and disable ANA reporting and initialization of related variables
if it is false. We can expose MNAN (Maximum Number of Allowed
Namespaces) even if ANA reporting is disabled. But MNAN is not
required if ANA reporting is disabled. So do not set MNAN if it is
false too.
Add a public API spdk_nvmf_subsystem_set_ana_reporting() to set
ana_reporting by the nvmf_create_subssytem RPC.
The next patch will add ana_reporting to nvmf_create_subsystem RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icc77773b4c9513daba2f1a9fdaf951d80574f379
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3850
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new RPC, nvmf_subsystem_get_controllers to retrieve the list
of NVMe-oF controllers of an NVMe-oF subsystem.
One of the main use cases will be to get identification information
of NVMe-oF controllers to configure their ANA states dynamically.
Pause and resume the subsystem to access the controllers safely.
One subtle issue remains. The JSON RPC returns success even if
resuming the subsystem fails. Write FIXME explicitly to address this.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibf8d1cf56850a705e343b86022d101b4c7204199
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3848
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A subsystem RPC is not transitioned to a paused state when there
are ios outstanding (tracked by subsystem poll group).
In general AERs, are not tracked as outstanding IOs. However,
there are 3 paths in nvmf_ctrlr_async_event_request which do not
adjust the outstanding io count.
If we get into any of these 3 paths, the subsystem pause can hang
forever.
The issue was reproduced with hot plug stress testing under load.
We can get into the second path (SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE)
under these circumstances:
- An AER completion is sent to the initiator due to a namespace change
(e.g. hot remove/add)
- In this case, type is set to SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE
- The initiator sends a new AER admin command, hitting the second path
where we return without adjusting the outstanding ios.
Fixes: 1552
Change-Id: I45f781966cc1e9a601b2305c7985a21154d802e8
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3854
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is a fatal bug that could easily cause data corruption when using
thin-provisioned blobs. In blob_request_submit_rw_iov(), we first get
lba by calling blob_calculate_lba_and_lba_count(),
blob_calculate_lba_and_lba_count() calculates different lbas according to
the return of bs_io_unit_is_allocated(). Later, we call bs_io_unit_is_allocated()
again to judge whether the specific cluster is allocated, the problem is it may
have be allocated here while not be allocated when calling blob_calculate_lba_and_lba_count()
before. To ensure the correctness of lba, we can do lba recalculation when
bs_io_unit_is_allocated() returns true, or make
blob_calculate_lba_and_lba_count() return the result of
bs_io_unit_is_allocated(), use the second solution in this patch.
By configuring more than one cpu core, md thread will run in a separate
SPDK thread, this data corruption scenario could be easily reproduced
by running fio verify in VMs using thin-provisioned Lvols as block
devices.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: I099865ff291ea42d5d49b693cc53f64b60881684
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3318
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
