This patch adds the following:
1. Change signature of nvmf_rdma_fill_wr_sge - pass ibv_send_wr ** in
order to update caller's variable, add a pointer to the number of extra WRs
2. Add a check for the number of requested WRs to nvmf_request_alloc_wrs
3. Add a function to update remote address offset
Change-Id: I26f6567211b3ebfdb4981a7499f6df25e32cbb3a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
RDMA WR has a predefined number of SGL entries (16) and with new logic added to
support DIF the number of entries required to process the request may exceed
this limit since IO unit buffers might be divided into several parts to remove
metadata chunks from the transmition. This change calculates and allocates
required number of WRs.
Error handling section in spdk_nvmf_rdma_request_fill_iovs has been updated
to free allocated WRs
Change-Id: Ie5d659d8305a454949827d1f4aff6d871b7e825d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470474
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This change helps to avoid passing the number of additional WRs to
spdk_nvmf_rdma_request_fill_iovs in the following commits and minimizes
changes in spdk_nvmf_rdma_request_parse_sgl
Change-Id: Id530d0996af661051d94930e3f776bad2dcc5771
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470473
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It can be useful for passing additional information about nvmf
target to a handler for new nvmf connections. Context can be
stored in globals as it is currently done in nvmf code. However
in case of multiple targets or languages where accessing global
state is challenging (i.e. Rust), this becomes inconvenient.
Change-Id: Ia6a2fdba4601531822b3e5fda7ac5ab89d46f6c5
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469263
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Enables access control to allow subsystem access on one or more FC ports.
If a subsystem definition does not have a single valid "Listen" directive,
then the subsystem will allow dynamic listen address binding. For such
subsystems,
* When a FC port comes online, FC transport will add port's address
to subsystem's listen list.
* When a FC port goes offline, FC transport will remove port's address
from subsystem's listen list.
If subsystem definition has 1 or more valid "Listen" directives then FC ports
coming online or going offline will not affect subsystem's listen address
whitelist.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: Ic7fed76e4bf8d1df0aeeae1d4fa5e6d207afccf3
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471025
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SCSI command uses iSCSI task and data buffer, and will use zero copy
bdev I/O APIs.
To use zero copy bdev I/O APIs, we have to allocate iSCSI task
before allocating data buffer.
Hence we separate PDU header and payload handling for SCSI command,
include iSCSI task allocation into PDU header handling first.
Use pdu->task to pass the task allocated by the former to the latter.
In iscsi_pdu_hdr_op_scsi(), we can not expect pdu->data_segment_len
is set. So getting data segment length from PDU BHS instead.
In the updated iscsi_op_scsi(), if it sees pdu->task is NULL or
pdu->is_rejected is true, do nothing. Besides, check LUN hot plug
again to separate PDU header handling and PDU payload handling.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic09451ab022b9714381f03c63bd3008c39fedb8e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We want to move iSCSI task allocation before data buffer allocation
to use zero copy APIs in iSCSI target. As a preparation, we have to
separate PDU header and payload handling. This patch makes it a little
easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib7f5ec71933fd6022fd2248aff0a0bd89b7ad830
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470289
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Separate PDU header and payload handling for Text Request PDU.
This will clarify the header handling and payload handling.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I162af0b4bf281852bb13af5f3261dacb38dee5e0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Double pointer is clever but reference to pointer is easier to understand.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5168e08ca67942c22ba2cbdc10925e8a9fd6da6c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471007
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The subsequent patches will separate PDU header handling and PDU
payload handling. But for the PDUs which have data segment,
if PDU header is correct, we have to read data segment even if any other
error is found and the PDU is rejected.
To do that, add a flag is_rejected to pass if the PDU is rejected or
not from PDU header handling to PDU payload handling.
If PDU payload handling sees the PDU is already relected, do nothing.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie3fe518fc0f452da9965a2fe3642568c86866480
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471005
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will separate PDU handler into PDU header handler
and PDU payload handler.
Some PDU types will have both PDU header handler and PDU payload handler,
and command is executed in PDU payload handler.
Some PDU types will have only PDU header handler, and command is
executed in PDU header handler.
CmdSN must be updated appropriately depending on the case.
As a preparation, factor out updating CmdSN into a helper function
iscsi_update_cmdsn().
Besides, storing the passed CmdSN into PDU is duplicated and remove
the duplication in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib5f271a1624a39e82d6271dfebcc181e3850e260
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471333
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
To make the code clearer,
- make the spdk_iscsi_read_pdu() private in iscsi.c and named iscsi_read_pdu(), and
- make the iscsi_conn_handle_incoming_pdus() public and named
spdk_iscsi_handle_incoming_pdus().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I967681b8e9b86681a906b18719e91e1d387450d7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469969
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add PDU receive state to each connection, and each connection
transits among states during receiving incoming PDUs.
Four states, AWAIT_PDU_READY, AWAIT_PDU_HDR, AWAIT_PDU_PAYLOAD,
and ERROR are same as SPDK NVMe-TCP target.
Move clearing conn->pdu_in_progress just before putting pdu
when PDU processing completes normally to match with error case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id24b6d6662896b5685125a46ee20cbf216668838
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use this function in nvmf_request_alloc_wrs and nvmf_rdma_setup_request
to eliminate code duplication
Change-Id: I771e0e899043049c90298e050d4353145e36f0d1
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471034
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Delete a pointer to spdk_nvme_cmd as it is not used directly
Change-Id: I36a6a6d95c0707f446a0797a55a9e60c62f9503c
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470472
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Return -1 from spdk_nvmf_rdma_request_parse_sgl in the case of -EINVAL since 0 value
returned by spdk_nvmf_rdma_request_parse_sgl is treated as no memory case
Change-Id: I536592260a3bb658a1a4bc3a79c5b37fbacd3edc
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Leaving these on the stack outstanding list can cause unnecessary
buildup. If we fail to post the request to ibv, then the upper layer
request will be freed immediately for reuse, but we will keep that
request in the outstanding queue at the RDMA layer.
Change-Id: Ib422dc9fcb50344ce7c01749f3e20ea9310fd5cb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470255
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It was previously impossible to get back to the group
from the socket. This will be needed later.
Change-Id: I7b72c1b3bb9f5f4fda7e94475636e103df409316
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is useful for detecting sockets that have been disconnected
by the other end without reading data.
Change-Id: Ieb6529984d282d48373766d9f5555cf11720f19b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit bc4e31d6b24d08aa20a1166215e0131f72c7c36e.
This change was accidentally merged after it was decided to go with a
different architecture.
Change-Id: Ifc9d8b08bd1fcbc4ace8dd6fb4bd0014330916ed
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471144
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The patch of this purpose is to exclude the CPU cores
occupied by the DPDK thread. To mitigate the corner
case, we only do it when the number of online CPU cores
is larger than then DPDK thread occupied cpu cores.
The purpose is uset to improve the performance and avoid the
contention between DPDK thread and user's own thread.
Change-Id: I1a4a28074df97c55ac531440aea41059a75543f6
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471000
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If PDU header digest error is detected, it indicates that the length
field of the header may have been corrupted. Hence it's may not be
possible to identify the location of the beginning of a later PDU.
So move checking header digest before handling payload and then
close the connection if header digest error is detected.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56f6bc082dc0b244e71ad996b4da08e0203f8cdd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move spdk_iscsi_execute() from iscsi_conn_handle_incoming_pdus()
to spdk_iscsi_read_pdu() and then strip the prefix spdk_ from
spdk_iscsi_execute() and make it private.
This is to introduce state machine into receive incoming PDU processing.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5d5b3e55ece0994532e924d3c75d898cb373875c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
IO trace ISCSI_TASK_EXECUTED was taken after PDU was freed.
spdk_trace_record() doesn't dereference the passed pointers and it's fine,
but get the trace before PDU is freed to make the coder clearer.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I53a19dbd85e9599c4fa9d7458b5344cff9c76ea2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471203
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
LUN ID was not saved in iSCSI task, and it didn't work when we attached
more than one LUN.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I75388ee6c1e69bb567cf7c5c691315c51cab70eb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471202
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We can unify several error logs of spdk_iscsi_execute() failure
into a single error log.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1dd6a7312e5c615c478771beb89fd44fdb1710c1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470286
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move logout check from iscsi_conn_handle_incoming_pdus() to
spdk_iscsi_read_pdu() to introduce state machine into receive
incoming PDUs processing.
Besides, remove a debug log because similar debug log is already
collected in spdk_iscsi_conn_read_data().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I11ee800eb1fd60796669d5390bd3cd1031066ca7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470285
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iscsi_check_data_segment_length() is NOP now and can be removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3ba473c2989d1adf7f0fcbaef026f0b60bc1beb7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470726
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We can move data segment length check from iscsi_check_data_segment_length()
to iscsi_op_text() and iscsi_op_scsi().
Task Management Function request, SNACK request, and Logout request
don't have data segment, and so any related check is not added.
Of course we can add check if data segment length is zero though.
This patch also changes the return type of spdk_get_max_immediate_data_size()
and a related variable spdk_iscsi_pdu::data_segment_len to uint32_t to
remove unnecessary casts. They are little to stand as an independent
patch.
The next patch will remove iscsi_check_data_segment_length().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I736ec234d2726de0c70bbae7e748a5b1b5134a32
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470725
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For SCSI Data-Out and NOP-Out, we can move data segment length check from
iscsi_check_data_segment_length() to iscsi_op_data() and iscsi_op_nopout(),
respectively.
In iscsi_op_nopout(), data_len had been got from reqh->data_segment_len
but reqh->data_segment_len is already copied to pdu->data_segment_len at
spdk_iscsi_read_pdu(). So add a change to use pdu->data_segment_len to
this patch. This is little change to create a single independent patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iff7d763d8ce48bdb483b809a98be82996f73f471
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470724
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
During login processing, only login request is accepted. So we
can move data segment length check from iscsi_check_data_segment_length()
to iscsi_op_login().
A few patches from this will inline data segment length check into
each opcode handler and then remove iscsi_check_data_segment_length().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I527ab27e8e0d69a067839b47635584d5262b0e49
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470723
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When we introduce state machine, allocating data buffer and reading
PDU payload will be done in the different state. Hence separate
them into the different code block.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic54a31d7da9dbc46f558ad0f0ad26bf8b99a3ea7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The subsequent patches will separate handling header and payload.
Move getting data_len down because data_len is for payload.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I654b33e9539ed1dba63f6d303de7955eee9bb200
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469964
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When doing a reset on an NVMe-oF target with active I/O qpairs, we need
to be able to submit fabrics commands on them in order to perform a reset.
Currently, resetting a fabric controller with any I/O qpairs active will
cause the reset to hang indefinitely.
Change-Id: Ic972a301390a4dd64adabedfe01aa4e5253e40b0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The remove callback is a built in way of alerting the user application
that we have removed a controller. Once we fail a controller, we never
move it back out of that state so it is in essence removed.
Change-Id: Iaad6bef0994e9ddd5a424f6b83502f9191b2de49
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
hwqp->fgroup is valid only for IO queues and this particular function
deals with pending requests for IO queues. Check hwqp->fgroup and
bailout if called in LS queue context.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I40bc9d3c576abd145bd6b296c07dbd64fd3dabd1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470897
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
My recent changes that introduced batching to queued request
resubmission also introduced a regression that can lead to reordering
requests before submitting them to the drive. This change prevents that.
We wait until inside the internal _nvme_qpair_submit_request function to
check for queued entries to avoid queueing a request that has children.
If a request that has children gets queued, when we process completions
and resubmit the parent, it will result in the children being submitted.
Since we only account for the number of requests we completed in the
last iteration, some of the child requests may be requeued out of order,
or worse, none of the child requests will end up being submitted to the
transport and they will all be queued behind previously queued requests.
Change-Id: I58e1c458c25fbf3f9f75364f05b1076b166a6212
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470890
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In-capsule data transfer can only be supported by NVME drives with SGL memory layout
Add test to examine new behaviour
Change-Id: Iaef6564c8e5c96c1c5af16ab41d6e3827f6a82b6
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470469
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When we ran out of child_iov space, ensure the iovs to be aligned
with block size. However the calculation was wrong.
(to_next_boundary_bytes % blocklen) meant not to_last_block but to_next_block.
So calculate to_last_block_size by reducing to_last_block_size from blocklen.
The data was collected when the issue occured. So add unit test
by using the data.
Fixes#979
Reported-by: Geoffrey McRae <geoff@hostfission.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I62a50bada450288ea7c60aec0e557c2a53cd8916
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470806
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
va_list is not passed in logfunc, so the user-provided log call can't
get the arguments corresponding to the format string.
This patch fixes it and replaces log func pointer in spdk_app_opts
with logfunc.
Change-Id: I7f7806f47c4fd8f36f3234aa5a8c877db0fc7140
Signed-off-by: Yang Fan <fanyang@smartx.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469828
Reviewed-by: Feng,Li <fengli@smartx.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Making this structure available from the ctrlr allows us to call the
remove callback when the controller is failed/removed on transports
other than pcie.
Change-Id: I2c66dfef12b039c0d6daf7df83da745757818006
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469636
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
