Purpose: Prepare for the further optimization work
to use one bigger buffer to read more data for
reducing system calls.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie92603b09308bd3149263269fdec355b67251b37
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For split SCSI read command, if there is any failure in the sequence of
it, the first error must be propagated to all subtasks of it.
For split SCSI write command, if there is any failure in the sequence
of it, the first error must be propagated to the primary subtask.
Before this patch,
for read task:
- any failure is propagated to already completed subtasks, but
is not propagated to any subtasks not completed yet, and
- if any failure occurs in non-primary subtasks, it is not propagated
to the primary subtask.
for write task:
- if the primary subtask completes after any failure of non-primary
subtasks, the failure will be overwritten by the success of the
primary task.
This patch fixes these issues.
Change-Id: I2d878798cbb40a8c5bd6a6fe5efb32b8de4a8ecd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By up to the previous patch in the patch series, unexpected behavior
due to write tasks in task management commands have been fixed.
But unexpected behavior due to read tasks in task management commands
have been still observed.
Remaining patches in the patch series will fix the unexpected behavior
due to read tasks in task management commands.
This patch is for ABORT TASK.
ABORT TASK is not supported in SCSI layer yet. But the initiator
doesn't care about the failure is due to not-supported or failure.
It must be avoided that the task management command returns SCSI Good
but some tasks are not aborted and return SCSI Good later. On the other
hand, it is acceptable that the task management command returns
failure but some tasks are partially aborted.
Hence this patch adds operation without checking the support status
in SCSI layer.
iSCSI layer doesn't have pending queue and hence if the target task
is read task and is queued in queued_datain_tasks, it must be
aborted before submitting ABORT TASK to SCSI layer.
Aborting the target task may not complete by an iteration because
submitted read tasks are limited. Hence use poller to complete abortion
by repetition.
Change-Id: I030a8b2f19c2f7c7d2f7b0b2c633579534db631b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reason: If the task is queued in scsi layer to handle, we
should free the task after calling the spdk_iscsi_task_cpl.
Otherwise, if only this task is executed (without subread tasks),
the task will be freed by the loop early, which will cause
the segment fault in spdk_iscsi_task_cpl function.
Change-Id: Ifc42399957b24d976af5fd12f6e33459a3ea86ba
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/421706
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A few open-coded sequences equivalent to SPDK_CONTAINEROF() were
scattered around; replace them with the macro from spdk/util.h.
Change-Id: I95c6e6838902f411420573399ced7c58c2e4ef84
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418126
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The SCSI layer no longer needs to know about the parent/subtask
relationship maintained by iSCSI.
Change-Id: Ia6f7c5367c5b656bd7521ed1abb6d0f713a0500b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393697
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This is not used in the generic SCSI layer.
Fixes: 8eba104b73 ("iscsi: Fix the bug for hotplug when read IO is
running.")
Change-Id: Ie0715ea0ee5084eaf1321ba2f65f7bfa674c663a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393211
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These variable names are changed to retain conformity with astyle 3.0.1. Astyle 3.0.1 recognizes 'final' as a keyword and incorrectly formats the iscsi_spec.h file breaking the build. Names were changed to avoid this case and maintain consistency within the struct.
Change-Id: I39c29d768c0ddfd459a9e9212c29cf564dad1963
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/369905
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is an artifact from a past design. There is no longer
any reason to create an event here - the bdev layer will
correctly queue events and call completions on the correct
thread.
Change-Id: I145dab4046899834c0449ec7380dcbb28215b493
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364831
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a helper function to find the iSCSI task given its nested SCSI task
structure, and use it to remove all casting between spdk_scsi_task and
spdk_iscsi_task.
Change-Id: Idc7c6d0a3b4d53041916d25a1bdecedfb56b94f9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI library already provides a callback when the task is released
(free_fn), so the user can update their own task counter.
Change-Id: I7fb13f6fff66dbba2315fd03fb06e49f793be123
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI layer was not using the task ID for anything; the iSCSI layer
was using it to store the task tag, so move it there and rename it to
"tag" to make its purpose clear.
Change-Id: Ibda4f4e215056116b9be4a3a0264f98bc4c29535
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI layer doesn't use subtasks; these are an iSCSI layer concept.
Change-Id: I83871f02362f10fd4ecd4b2a1544eb76bfa53595
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix up all existing spacing errors in comments and add an automated
check for patterns like /*comment*/.
Change-Id: I28f61c93612dc0f8aed66bd509da78e91ea9737e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>