If a core has a very high busy percentage, we should
not assume that moving a thread will gain that
thread's busy tsc as newly idle cycles for the
current core.
So if the current core's percentage is above
SCHEDULER_CORE_BUSY (95%), do not adjust the
current core's busy/idle tsc when moving a thread
off of it. If moving the thread does actually
result in some newly idle tsc, it will get adjusted
next scheduling period.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I26a0282cd8f8e821809289b80c979cf94335353d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9581
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For the src thread, add the busy_tsc of the thread
we are moving to the idle_tsc of the current core.
This is consistent with how are accounting for the
cycles in the target core too.
We will disable the load_balancing.sh script for now.
We will reenable it later in this patch set once
a few other changes are made, along with some updates
to the load_balancing.sh script based on the changes
made in this patch set.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8af82610804e97dabf62ccd90f75a0e6e37d276f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9550
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The values 100 and 200 are used a lot in this part of the
unit tests, many times for different reasons. So add
some more variables and use some of the existing ones more
often to make some of this more clear to the reader.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2196bb6a1ac4b86ab0ddd9a3b88863664116cca5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Refactor this part of the unit tests to make it a bit
easier to maintain as the dynamic scheduler itself is
modified.
For example, depending on the simulated thread loads,
we may need to pass extra events to cores for
purposes of setting interrupt mode. The important
thing to test here isn't how many events it takes to
do that, but what is the end result.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad2e861cfa0bfd16c853332650e3ab3a9727f490
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk.mock.unittest.mk contains platform specific definitions to wrap
syscalls. Allow SPDK_MOCK_SYSCALLS to be predefined before it is
included to extend the list of syscalls to be wrapped. Update rpc
Makefile to use this mechanism so that the platform specific definitions
are used.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: If51c0e7a31cf0eda45a844cb8cfa579efe173c42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9621
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When data digest is enabled for a nvme tcp qpair, we can use accel_fw
to calculate the data crc32c. Then if there are multiple
c2h pdus are coming, we can use both CPU resource directly
and accel_fw framework to caculate the checksum. Then the datao value compare
will not match since we will not update "datao" in the pdu coming order.
For example, if we receive 4 pdus, named as A, B, C, D.
offset data_len (in bytes)
A: 0 8192
B: 8192 4096
C: 12288 8192
D: 20480 4096
For receving the pdu, we hope that we can continue exeution even if
we use the offloading engine in accel_fw. Then in this situation,
if Pdu(C) is offloaded by accel_fw. Then our logic will continue receving
PDU(D). And according to the logic in our code, this time we leverage CPU
to calculate crc32c (Because we only have one active pdu to receive data).
Then we find the expected data offset is still 12288. Because "datao" in tcp_req will
only be updated after calling nvme_tcp_c2h_data_payload_handle function. So
while we enter nvme_tcp_c2h_data_hdr_handle function, we will find the
expected datao value is not as expected compared with the data offset value
contained in Pdu(D).
So the solution is that we create a new variable "expected_datao"
in tcp_req to do the comparation because we want to comply with the tp8000 spec
and do the offset check.
We still need use "datao" to count whether we receive the whole data or not.
So we cannot reuse "datao" variable in an early way. Otherwise, we will
release tcp_req structure early and cause another bug.
PS: This bug was not found early because previously the sw path in accel_fw
directly calculated the crc32c and called the user callback. Now we use a list and the
poller to handle, then it triggers this issue. Definitely, it will be much easier to
trigger this issue if we use real hardware engine.
Fixes#2098
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I10f5938a6342028d08d90820b2c14e4260134d77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9612
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Abort any queued admin requests once admin queue gets enabled. A request
can get queued if a controller is being reset and it gets submitted
while admin qpair is being reconnected. If these requests aren't
aborted, the init process will stall, as requests don't get resubmitted
while controller is resetting and subsequent admin commands required for
the initialization would be queued too.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If456a297d2d434b3cc741816cbfb13b01d37e963
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow to return more than one memory domain.
This change aligns bdev and nvme API and provides
more flexibility for custom transports.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ica9b12ad8463c361be6cb62ee2c0513eec0b486d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9546
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Enable dump of transport stats in functional test.
Update unit tests to support the new statistics
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I815aeea7d07bd33a915f19537d60611ba7101361
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8885
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch enables us to aggrete multiple ctrlrs in the same NVM
subsystem into a single bdev ctrlr to create multipath.
This patch has a critical limitation that ctrlrs which are aggregated
need to have no namespace. Hence any nvme bdev is not created.
However it will be removed in the next patch.
The design is as follows.
A nvme_bdev_ctrlr is created to aggregate multiple nvme_ctrlrs in
the same NVM subsystem. The name of the nvme_ctrlr is changed to be
the name of the nvme_bdev_ctrlr.
NVMe bdev module has both the failover feature and the multipath
feature now. To choose which of failover or multipath to use, add an new
parameter multipath to the RPC bdev_nvme_attach_controller.
When we attach a new trid to the existing nvme_bdev_ctrlr, we use the failover
feature if multipath is false, we use the multipath feature if multipath is
false.
nvme_bdev_ctrlr has a list for nvme_ctrlr and it is guarded by the
global mutex. Callers can query nvme_ctrlrs from a nvme_bdev_ctrlr via
trid as a key. nvme_bdev_ctrlr is not registered as io_device.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20571bf89a65d53a00fb77236ad1b193e88b8153
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously, if an I/O qpair is disconnected, we tried reconnecting
the qpair. However, this reconnect operation was very likely to fail
and will not match the upcoming asynchronous connect/reconnect
operation. We need an extra callback to make this reconnect operation
asynchronous, but we do not want to have it.
Hence if an I/O qpair is disconnected, we free the I/O qpair and then
reset the corresponding nvme_ctrlr immediately. If the admin qpair is
also disconnected, the nvme_ctrlr is reset immediately. However this
event may never happen. So we do not wait for the error of the admin
qpair.
The NVMf host may disconnect connections by itself intentionally.
In this case, resetting the nvme_ctrlr will surely fail. But resetting
the nvme_ctrlr frees all I/O qpairs of the nvme_ctrlr and these I/O
qpairs are not created again until resetting the nvme_ctrlr succeeds.
Resetting the nvme_ctrlr once at most is more efficient than repeating
reconnecting the I/O qpair. So this change is valuable even for such
intentional disconnection. However, it is helpful to know the event that
I/O qpair is disconnected. Hence change DEBUGLOG to NOTICELOG in the
disconnected callback. The disconnected callback is not repeated, and
we do not need to worry about NOTICELOG flooding.
Refine the unit test case to verify this change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I376b749c2f55d010692bf916370e8bb4249b795f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9515
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is similar to how we name other module library
directories.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iadaf59231323180b48b5d0cf2e6acb3d8bfc9807
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9549
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also make stub for spdk_mempool_get_bulk consistent with DPDK APIs.
Change-Id: I021378ea92651d75a73cc9f447df57c2f71680fa
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9356
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Moved frequenty used stack vars to globals and added setup and
teardown functions. Should be useful in upcoming patches as well
wrt code savings.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I468bec8856c354fcc954628e4e733594a6580104
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7013
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Renamed nvme_qpair_abort_reqs() to nvme_qpair_abort_reqs_with_cbarg() to
highlight the fact that it only aborts requests with specified cb_arg
and to distinguish it from _nvme_qpair_abort_reqs() which aborts all
requests immediately.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I32fec5ab0501b1beb8605689d73ec42a6424fba5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9323
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In unit tests, spdk_nvme_ctrlr had opts but did not use it.
Hostnqn will be checked to determine if multipath can be created.
Hence we implement the stub spdk_nvme_ctrlr_get_default_ctrlr_opts()
and copy probe_ctx->opts to ctrlr->opts as we do in lib/nvme.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I13980424d5f463877eae7f7cd1e5ffcae888aebe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9333
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Mock out open, close, unlink, and flock system calls. Flock isn't
supported under nfs, so if the repo is mounted through nfs, the test
will fail. And a unit test shouldn't be doing these calls aynway.
Additionally, changed listen_addr from an IP address to a file path, as
the RPC listens on a UNIX socket, so an IP address doesn't make much
sense.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icc759a74e6db4d1b9e766313a1e4672820e1c272
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This removes some code that was duplicated in the
CHECK_EN and DISABLE_WAIT_FOR_READY_1 states.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie5d175540f71c692f7784c7ff22a48f34b9b7082
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Added mocks in preparation for making the NVMe controller initialization
use asynchronous versions of the register operations.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifbcc3c73933fb965db710389fec8cd2d52886d4d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8610
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will make it easier to support asynchronous register set/get
functions.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9915609ff940596ae4d67388238cc685dfa426fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8608
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously bdev_nvme_reset() returned -EBUSY if ctrlr is being
destructed and returned -EAGAIN if ctrlr is being reset.
These did not match what spdk_nvme_ctrlr_reset() returned.
Reset operation will be more important than current when multipath
is supported and reset operation is made asynchronous.
Hence change bdev_nvme_reset() to follow spdk_nvme_ctrlr_reset().
bdev_nvme_reset() returns -ENXIO if ctrlr is being destructed and
returns -EBUSY if ctrlr is being reset.
Additionally change the return value of bdev_nvme_failover()
accordingly. After the change bdev_nvme_failover() returns -ENXIO
if being destructed and returns -EBUSY if ctrlr is being reset.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie2c6f8601050b1043d83de9cf01490751784e4e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the last patch, include hostid into ctrlr_opts rather than
passing it as a parameter for bdev_nvme_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d04db1c5767ec76a9a7cd255c3a8d56b0b8f583
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9344
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
An error might occur after succesful transport creation
when the new transport is added to nvmf poll groups, e.g.
in nvmf_transport_poll_group_create. In that case
transport is not detroyed and poll groups are not fully
functional. To correct this behaviour, destroy transport if
spdk_nvmf_tgt_add_transport fails. Also update nvmf_tgt
initialization step to check that all poll groups were
created.
Change-Id: I116e6944729d846c1755c2844c77825f65db8c12
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9255
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This only existed to share code between OCSSD and regular NVM
namespaces. Now OCSSD is gone, so just merge the files into bdev_nvme.
Change-Id: Idb73cc05d67144de5dd20af8db24c8f6974d10a7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9337
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_ctrlr_populate_namespaces
Avoid relying on this number. Different targets have interpreted its
meaning in different ways and it cannot be used anymore in practice. It
may also be very, very large.
Change-Id: I94e8eae49d6ccdbd8be302b30a120d89242b6d39
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9316
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Try to use these accessors instead of directly using the namespaces
array. This will make changing the data structure easier later on.
Change-Id: I3367d0e0065894f3aa199ed1698d27976b4cbbb5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9315
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the number of namespaces is very large, this can cause excessive
memory allocation. This is especially true because when the number of
namespaces is large, it is almost always very sparsely populated.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I27d94956c222ae3c49c6a7422164ae3a8ec8d963
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9302
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Poll group holds lists of qpairs in different states and
when we got rdma completion with error, we iterate these
lists to find a qpair which qp_num matches. qp_num
is stored inside of ibv_qp which belongs to spdk_rdma_qp
structure. When nvme_rdma_qpair is disconnected, pointer
to spdk_rdma_qp is cleaned but qpair may still exist in
poll group list and when we start searhing for qpair by
qp_num we may dereference NULL pointer.
This patch adds a check that pointer to spdk_rdma_qp
is valid before dereferencing it. To minimize boilerplate code,
wrap all check in macro. Add unit test to verify this fix.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I1925f93efb633fd5c176323d3bbd3641a1a632a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a subsystem is being deleted, we disconnect all qpairs
and when the last qpair for some controller is disconnected,
we start controller desctruction process. This process requires
to send a message to subsystem's thread to remove the controller
from the list in the subsystem and after that send a message to
controller's thread to release resources.
The problem is that the subsystem also destroys all attached
controllers. This order is unpredictable and we may get
heap-use-after-free or double free.
To fix this problem we can rely on the fact that the subsystem
can only be destroyed in incative state, that means that all
qpairs linked to the subsystem are already disconnected and
all controllers are already destroyed or in the process of
destruction.
spdk_nvmf_subsystem_destroy API is now can be asyncrhonous,
it accepts a callback with cb argument.
Change-Id: Ic72d69200bc8302dae2f8cd8ca44bc640c6a8116
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
John Kariuki tested this patch on a system with
several Intel P5800X Optane SSDs, to determine the
performance impact of adding these two
spdk_trace_records() in the main NVMe I/O path.
The pathological case (512B random reads on a single
Xeon core) decreased from 13.10M to 12.88M, or 1.7%.
Normal workloads (4KB+) would incur a smaller penalty
since the I/O rate would be much lower - maybe even
unnoticeable..
This is a really valuable tracepoint to have enabled
by default, so I think this small amount of degradation
is acceptable.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie2543cadf3541eb74398d31ac0f495522ab49ec0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9303
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When preparing for a reset, use this new call to tell
the driver to avoid sending DELETE_CQ/SQ commands to a
PCIe controller when they aren't needed.
Fixes issue #2073.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9ebb7d5c3f7cbb1c3192f162f32edbbea41acde1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9250
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Matt Dumm <matt.dumm@hpe.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This patch moves schedueler and governor related API from
the internal event.h to public scheduler.h.
With this it is possible to create subsystem responsible
for handling the schedulers.
Three schedulers and a governor were moved to scheduler modules
from event framework.
This will allow next patch to add JSON RPC configuration
to the whole subsystem.
Along with easier addition of other schedulers.
Removed debug logs from gscheduler, as they serve little purpose.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I98ca1ea4fb281beb71941656444267842a8875b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6995
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Refine ANA state from per subsystem listener to per subsystem listener
per ANA group.
Add an array of ANA state per ANA group to subsystem listener. The array is
indexed by ANA group ID - 1.
Then in I/O paths, we get ANA state by
ctrlr->listener->ana_state[ns->anagrpid - 1].
The NVMe specification indicates the existence of NVM subsystem specific
ANA state when FFFFFFFFh is specified as NSID for the Get Features
and the Set Features commands. For these, we return the optimized state.
Update the nvmf_subsystem_get_listeners RPC to return all ANA states
of the underlying ANA groups. The nvmf_subsystem_get_listeners RPC is
not matured and not used in the test code yet. Hence compatibility is
not high priority.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia2d4d5361ac01236f595c22765fd35e4c5fdee0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9064
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the first patch in the patch series to control ANA states not only
as a unit of subsystem listener but also as a unit of ANA group and create
user preferred mapping between namespaces and ANA groups within a single
subsystem.
This patch adds anagrpid to both spdk_nvmf_ns and spdk_nvmf_ns_opts, and adds
ana_group array to spdk_nvmf_subsystem to count number of namespaces per ANA
group within a single subsystem. The size of the ana_group array is equal
with the size of the namespaces.
For each subsystem, allocate ana_group array regardless of the value of
ana_reporting of the subsystem.
For each namespace, at its creation, initialize anagrpid explicitly to be equal
with nsid by default and increments the corresponding entry of the ana_group
array of the subsystem regardless of teh value of the ana_reporting of thee
subsystem.
Hence the contents of the created ANA log page is not changed even if the
algorithm to crete ANA log page is changed.
Additionally this patch adds a unit test case that one ANA group
has multiple namespaces.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I78539db4e7248c2953c6927ff8128cb5a7e34b96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9102
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a response is returned prior to _nvmf_request_complete being called then the cid in the response is
not set correctly and the PDU state is not reset which causes a hang and the PDU state machine is
expecting more data but none will be sent. There are two cases where this can occur:
1) If the request is bi-directional
2) If nvmf_tcp_req_parse_sgl returns an error (e.g max_io_size exceeded)
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: Icc3ed02a4499a12d8920e6433a746b72022a72fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9327
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If NN is very, very large, this allocates too much memory. For now, just
use a list.
Change-Id: I904977673d8fb6c86f03c94ba798c6cc07f4a4d8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9301
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This can be done immediately after receiving the controller identify
data for now.
Change-Id: I527a44c4d1f4d3ad2eeb8fc77e07086c2358cac3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9300
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As far as we're aware, this is not in use by anyone. OCSSD has largely
been replaced by ZNS and no OCSSD drives made it to the market.
Change-Id: I020ee277da5292f8c4777f224acafd87586f8238
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
