Includes a few related changes:
* slight refactor to have common prep function for batch prep
commands in the sw engine
* added support for dualcast batching in accel_perf example app
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If9f078a0f8eb509d296e60a94331c92a72f8cb10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2913
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Doesn't provide any performance benefit but lets apps consistently
use the batch interface regardless of engine. Additional functions
and test code to follow.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia737045560ddd5117a689f7715fa206268bbc13d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2911
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch uses the IDXD batch feature for initial queue depth loading.
As there is a good amount of code needed to support batching on a per
command basis, this starts with only copy. As other commands are
enabled for batching, they will be added to accel_perf. If batching is
not available, the perf tool will simply submit the initial queue depth via
a loop, the same way it did before batching.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2669936e4da9b31a1d8fa8f0c71e9f5a6fcae412
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2745
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk/nvmecli git index happens to be corrupted and
results in a lot of unrelated failures in the CI.
This patch attempts only to mitigate the issue of
unwanted failures by restoring nvmecli repository
to clean state.
Fixes#1496
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ic17bffb0bc5bd3222c9f395fb217d2ffae99ceb3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3415
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Running pkgdep on opensuse, but report error about:
'Not supported platform detected.'
ID=opensuse-leap must link to sles.sh.
So add this.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I059378da2b1a9cb7b7f6953d158956690d80053b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3220
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Suppres the following warnings which causes compilation errors:
1. gcc 10 complains on operations with zero size arrays in rte_cryptodev.c
Suppress this warning by adding -Wno-stringop-overflow compilation flag
2. gcc 10 disables fcommon by default and complains on multiple definition of
aesni_mb_logtype_driver symbol which is defined in header file and presented in sevral
translation units. Add -fcommon compilation flag.
Fixes issue #1493
Change-Id: I9241bf1fd78e86df6a6eb46b4ff787b2f7027b7d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3373
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a new sample application to test I/O abort for NVMe backend,
both PCIe and over Fabrics. And enable it to test pool by NVMe-oF
+ delay bdev + malloc bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5aa28b523bdb2c1d4d8c7af05f925c4dd01dda86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2661
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch will add the uring support to test kernel based
local devices, e.g., files or local NVMe devices.
To make one binary can support both uring and aio mode when --with-uring
is complied. We also introduce a new global variable g_use_uring to switch
the mode to use liburing or libaio.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I72851168cb377751313d7aa09040ef2a7eb76594
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3214
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This macro works only in debug build, in release it always returns
false.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I949ac5f3e3ff811bd4590645300c536c5a6afab6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3358
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Bdev underneath lvs has a certain value set as block size,
then lvolstore inherits that as `io_unit_size`,
which ends up as block size for the lvol bdev presents.
Before this patch lvs on device with block size of 512,
would create lvol bdev with block size of 512.
Meanwhile reporting in bdev_lvol_get_lvstores(),
that block_size is 4k instead.
This was result of addition of io_unit_size and
forgetting to update the value here. Previously
only I/O of page_size was allowed.
This patch adjusts the value reported to
io_unit_size.
Alternatively it could have been removed,
or name changed to "io_unit_size".
Yet for API compatibility reason this name
remains.
Info on actual page size which is always 4k,
is not useful to bdev users. No need to add
another field for that.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I19701c408c389f64e25c027c7bba789294bbed94
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3289
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We added the uring socket implemenation in 20.04, but
we did not announce anything since uring is experimental
and there is no test in our CI. Now, the uring socket
implementation can be announced because we added the
related test in our CI pool.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1c4fbf84d46f8632e7468bc9833050ba30f90649
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Due to the firmware response time for REVERT action, currently
we only enable this test with P4510 drives.
Change-Id: I4b02008ec0b7d2caeba20c566b1cf1b69404ae12
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Adding fedora31 to the list of available choices
in create_vhost_vm script.
This requires some changes in Vagrant_vhost_vm because
fedora is configured differently than ubuntu.
Fedora VMs will very useful for vhost tests because
they run on fedora.
Change-Id: Iad2820a9c3fe2621a368be34d9a72b80ad3f4941
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1677
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
During nvmf perf test, on machines with have local
nvme device figure out that they are added to
fio.conf file, that can caused bad for results.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibb6aa7b29ee63a8c41cd80909bc26d1dc224dd0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3113
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the state of the request is TRANSFERRING_HOST_TO_CONTROLLER,
we cannot abort it now but may be able to abort it when its state
is EXECUTING. Hence wait until its state is EXECUTING, and then
retry aborting.
The following patch will make the timeout value configurable as
an new transport option.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b43e79c3b0d9c53ed04b01a9eaa9b117b32d81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3013
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the request is queued and is not in completing, we can abort
it safely.
If the state of the request is NEED_BUFFERING, the request is
queued to tqpair->group->group.pending_buf_queue.
If the state of the request is DATA_TRANSFER_TO_CONTROLLER_PENDING,
the request is queued to rqpair->pending_rdma_read_queue.
If the state of the request is DATA_TRANSFER_TO_HOST_PENDING,
the request is queued to rqpair->pending_rdma_write_queue.
According to the current state, dequeue from the corresponding
queue, and then call an new helper function
nvmf_rdma_request_set_abort_status().
Using helper function will be easier to read.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0327f4d2c4728a11b3b6bbc7c2252f0b35263cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3012
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Call nvmf_ctrlr_abort_request() if the request whose CID matches
is found and its state is executing.
nvmf_rdma_qpair_abort_request() returns immediately if rc is
SPDK_NVMF_REQUEST_EXEC_STATUS_ASYNCHRONOUS, or calls
spdk_nvmf_request_complete() otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1462a21db7270f3d63f8f293ad4be61d52e74da1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3011
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
If the state of the request is TRANSFERRING_HOST_TO_CONTROLLER,
we cannot abort it now but may be able to abort it when its state
is EXECUTING. Hence wait until its state is EXECUTING, and then
retry aborting.
The following patch will make the timeout value configurable as
an new transport option.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98347b68e8b6b4a804c47894964cb81eae215aaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3010
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Use logical block size instead of base bdev block size in
vbdev_compress_claim. This is relevant to enable the compress bdev to
present a logical block size that is different from the block size of
the base bdev (e.g. 512B logical on 4KB base bdev).
However, this is just an internal fix/preparation and there is
currently not yet a way for users to specify a different
logical block size, e.g. through an rpc.py parameter.
Signed-off-by: Sven Breuner <sven@excelero.com>
Change-Id: Id7562f0da234ce11242b7ee78837a317ee51c211
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2858
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In my mind, we should firstly remove the sock from the group, then
all the call_cb of pdus will be handled, then we clear the task,
we can avoid the duplicated resource recycling.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic5fad130e58c9dcb42a237973979b042eabdf43a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3309
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Bandwidth measurement is realized by bwm-ng tool.
Using this measure tool will help us to check network saturation.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7b95b9b4ac3ca3b1847ec72ab7ea333807befe89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3190
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the request is queued and is not in completing, we can abort
it safely.
If the state of the request is NEED_BUFFERING, the request is
queued to both tqpair->group->group.pending_buf_queue and
the queue per state.
If the state is AWAITING_R2T_ACK, the request is queued to the
queue per state.
Dequeueing from the queue per state is done in
nvmf_tcp_req_set_state(). Hence explicit dequeuing only when the
state of the request is NEED_BUFFERING.
Most abort operation is common between two cases. We can use fallthrough
in switch-case but factor out the common operation into a helper
function nvmf_tcp_req_set_abort_status() instead because we may use
the helper function in future and using helper function is easier to
read than fallthrough.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1695b084d5d1f2537fbdd512bc3cd136e0f6a65b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3009
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Call nvmf_ctrlr_abort_request() if the request whose CID matches
is found and its state is executing.
nvmf_tcp_qpair_abort_request() returns immediately if rc is
SPDK_NVMF_REQUEST_EXEC_STATUS_ASYNCHRONOUS or calls
spdk_nvmf_request_complete() otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1abceecc211ee79d8ac18a82dc63b13d313a6f27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3008
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Add three variables, poller, timeout_tsc, and req_to_abort to
struct spdk_nvmf_request to wait until the request to abort is
abortable without using any dynamically allocated context.
struct spdk_nvmf_request is already very large (968 bytes), and
the pahole tool checked these variables did not create any extra hole.
Poller pointer and timeout value are usable for other potential
cases, and so use generic names.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7202ade181365ab586d8c30383b3ea0fef82dcff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3260
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
State machine is different among NVMe-oF transports and is
encapsulated to the transport neutral NVMe-oF controller and
NVMe-oF qpair.
To implement abort operation for each NVMe-oF transport,
add a function pointer qpair_abort_request to struct spdk_nvmf_transport_ops
and a stub nvmf_transport_qpair_abort_request() to encapsulate
which transport is used.
The following patches will implement qpair_abort_request for each
transport. Each qpair_abort_request() is responsible to call
spdk_nvmf_request_complete() for the abort request.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2beac959ed428c5108cf33691226b7fae5cd24d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3007
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Factor out abort operation on the specific qpair into a helper
function nvmf_qpair_abort_request().
After this refactoring, nvmf_ctrlr_abort_done() calls
_nvmf_request_complete() only if the passed status is zero.
If the passed status is not zero, nvmf_qpair_abort() is responsible
for calling _nvmf_request_complete() instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4828c0e21cc7650210675661d6e1c0fd54c7a2cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2991
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Description is not clear but according to the NVMe specification,
always set the completion status to success and differentiate only
the bit 0 of CDW0 between success and failure for abort command.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0195e72fe1d7fcc2592f47e9dcf92ac56912282c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1965
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change NVMe bdev module to enable abort as IO type.
Change _bdev_nvme_submit_request() to process abort request when the
IO type is abort.
The current thread tries aborting I/O command in the I/O qpair first.
If no I/O command to abort was found, send message to the thread which
is registered when creating controller. The controller thread tries
aborting admin command in the admin qpair next. If no admin command
to abort was found, complete the abort request with failure.
spdk_nvme_ctrlr_cmd_abort_ext() is used to try aborting command whose
cb_arg matches. qpair is set to NULL when trying to abort admin command.
Before calling spdk_nvme_ctrlr_cmd_abort_ext(), save the current
thread to process admin command completion correctly.
spdk_bdev_abort() supports any bdev module other than NVMe bdev
module and does not check CDW0 but checks only if the completion
status is success or failure. So add bdev_nvme_abort_done() and
converts the NVMe completion status to the bdev completion status.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If6aebae0ba2f6c5834ee926e161af9c4d825f341
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add thread pointer to struct nvme_bdev_ctrlr. The thread which
created nvme_bdev_ctrlr is set to the pointer.
The thread pointer will be used to limit only one thread to submit
admin abort.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia39d5cbc7a13b0e0022c0d5591069ea8776ef774
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3244
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
A new API spdk_nvme_ctrlr_cmd_abort_ext() gets cmd_cb_arg as a
parameter, and use it to abort requests whose cb_arg matches cmd_cb_arg.
The caller can set the parameter qpair to NULL if it wants to abort
requests on admin qpair.
Hold ctrlr->ctrlr_lock throughout because abort request is submitted
to admin qpair.
The API is not critical for performance, and so initialize parent
data first.
The API is for a specific qpair, and so hold SQID in the parent,
and it is copied to the children. On the other hand, CID is set
to child when request to abort is found.
Use an new helper function nvme_transport_qpair_iterate_requests()
to add abort request for each outstanding request which has
cmd_cb_arg as its callback context.
The case is possible such that the request to abort is not outstanding
yet but queued. Hence abort queued requests which has cmd_cb_arg
as its callback context too, but it is done only if there is no error
so far.
If only queued requests are aborted and there is no outstanding
request to abort, complete with success synchronously.
If there is no outstanding or queued request to abort, return -ENOENT.
When any abort request is submitted, the difference between success
and failure is only bit 0 of CDW0 according to the NVMe specification.
We cannot the existing helper functions nvme_request_add_child() and
nvme_cb_complete_child() but can use nvme_request_remove_child().
nvme_qpair_submit_request() may use only nvme_request_remove_child()
from these three helper functions. Hence we use req->parent as other
types of request do.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3a271c6542f8e2e6b425b3bf6151f41e924bc200
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new macro spdk_nvme_cpl_is_abort_success(). This will be used
in NVMe driver and NVMe bdev module later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8348f54ed8c9fd0238661f7d7e61e9e6f36f33c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2800
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use another list dedicated to hold queued requests being aborted
to avoid potential infinite recursive calls.
Add a helper function nvme_qpair_abort_queued_req() to move requests
whose cb_arg matches from qpair->queued_req to qpair->aborted_queued_req.
Then nvme_qpair_resubmit_requests() aborts all requests in
qpair->aborted_queued_req.
The first idea was that nvme_qpair_abort_queued_req() aborts queued
requests directly. However, this caused infinite recursive calls.
Hence separate requesting abort to queued requests and actually
aborting queued requests.
The detail of the infinite recursive calls is as follows:
Some SPDK tool submits the next request from the callback to the completion
of a request in the completion polling loop. For such tool, if the callback
submits a request and then aborts the request immediately, and the request
could not be submitted but queued, it will create infinite recursive calls
by request submit and abort, and it will not be able to get out of
completion polling loop.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8196182b981bc52dee2074d7642498a5d6ef97d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The original image was prepared using SCSI bus.
Using IDE explicitly speeds up boot process as the
system does not have to look where to boot from.
Change-Id: Ia9f649d1c46c591135833c02ed60b3c960ad8b98
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2840
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Arch Linux instance is failing on that CI. Seems that
libffi is a dependency for installing configshell_fb
and it's missing.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I988f2fb5e879b9e8882409c9c2772d5bd2c5e045
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
In INI config, split key based on whitespace AND symbol '='
This allows to have same format as FIO configs
FIO style config will be used for bdevperf config file
Change-Id: I92c501c839842919afb5c23ed935be010ae2b168
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3151
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
