Explicitly allocating spdk_bs_dev on init_dev() allows to check if dev_destroy for it was called.
If it was not, then ASAN will provide information on that.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I333185958dd8c29180954077a6c326b82e5949ae
Reviewed-on: https://review.gerrithub.io/374766
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously this only worked if bdevperf was set to
run on a contiguous set of cores starting at 0.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9983880711eb36681332495034b6656293eed3f6
Reviewed-on: https://review.gerrithub.io/374536
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
While here, do some additional cleanup:
1) add -h option to print help and exit
2) parse args before initializing the environment - this
allows "overhead -h" to immediately show a usage message
without having to wait for DPDK to initialize.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1021f9f7f7f2b03e34c0fd40714ce8f3db849cb2
Reviewed-on: https://review.gerrithub.io/374508
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make sure later tests don't fail due to a GPT partition table created on
an NVMe device.
Change-Id: I623e4fd0a84588a85f9d1ced6daf539d48267f50
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374007
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This helps prepare using the bdev test tools (bdevio and
bdevperf) with a virtio/vhost-scsi initiator. For virtio
initiators running in the host OS, SPDK must open file
descriptors for every hugepage to pass to the vhost
target. vhost typically limits the number of memory
regions to 8 - meaning 2MB hugepages generally will not
work, but even for 1GB hugepages we need to limit it so
that we do not default to trying to use all of the
hugepages.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If1e6e91cea096421b8dc5e707435e287ca14bb6e
Reviewed-on: https://review.gerrithub.io/374013
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I4b046e63a669d52c875efffb5a91e99845fc623d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370383
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the hotplug test was run in a qemu virtual machine, it consistently
failed to unplug the devices after insertion. Increasing the delay here
to four seconds resulted in proper deletion of the devices and a passing
test. (replicated three times)
Change-Id: I0283c8440568edd8dd8ca8945e691a29b775aab5
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/371401
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a file-backed AIO bdev to test it out.
Change-Id: Ifdf206bbdf6cae9379fdc02c80755e96a7198bce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373673
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding this coverage identified how the functions in test_env.c
are closely related to the new mock library. Given that there are
not that many here I don't think we *need* to try and consolidate
or make this any tighter. As it is now, I added a note at the top
of test_env.c to mention the use of mock globals to control when
a function is to be mocked or passed through and this first use
serves as an example.
Change-Id: Iac819f60f2028ac8bd8c75898e7dba7f4e12df35
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib6245e981d550e951a518176730a0e8d88378207
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372341
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I90edce0d9aac7be12ce8ba346aa6e16f67628b0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/369677
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This allows the library user the flexibility to use a different
threading model.
It also provides a way to indicate when the connection is closed so the
app can cleanly shut down.
Change-Id: Ibc196c0b8334fcb8f50d0233def16c6acf3c90d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372377
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows us to query and configure the bdev
modules much more dynamically.
Change-Id: I11f757039892f4353721be422317b641d72bd2a9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370584
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This prepares for enabling nbd mounting as a service within existing
applications.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I225ae20dc86b2d70a1a39a325e754b22f34feaee
Reviewed-on: https://review.gerrithub.io/369674
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2b388aa50bf6da3341c74ba4ea414939c91e22e1
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/371791
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2b6a22591d0a5f7435d9fd9dd8d6a1c854da3d89
Reviewed-on: https://review.gerrithub.io/371978
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
When using AIO as the real device of /dev/nbd, we
fail the test due to the alignment issue
Change-Id: I608dfdad1e0cac0beaf438c7a1f115c2d1a9f943
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/370233
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I261e6ed578335ab091973f7546035e63a00dbbf4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/369735
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I155d956b0492120bf1b0194d0e7303d781bcdb25
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/365106
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I88b4e91181ef87264a71bcbddb56d7a71cc0b084
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/369542
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This enables checking permissions - for example,
spdk_bdev_write will fail if the descriptor was not
created with write permissions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68b65a560f471f2e0f71a7f42cfa6689b911110f
Reviewed-on: https://review.gerrithub.io/369493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
vbdev modules still open/close bdevs as normal, but
should open bdevs read only when tasting (i.e. reading
the GPT to see if there are SPDK partitions). When
a vbdev module is ready to claim the bdev for purposes
of creating virtual bdevs on top of it, it calls
spdk_vbdev_module_claim_bdev(). It can pass its
open descriptor as well to have it promoted to
write access (required for future vbdev modules like
logical volumes).
Note: error vbdev was changed to copy the base bdev
parameters one-by-one instead of a blind memcpy - we
do not want to copy the base bdev's vbdev_claim_module
into the new bdev!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If2ee67dc78daf96050343c473671aa3402991bb1
Reviewed-on: https://review.gerrithub.io/368628
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
At least on Ubuntu, sgdisk gets installed to /sbin, not /usr/sbin.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I59c806d2c93c6a1773aea11d6fc669e3df0e3c08
Reviewed-on: https://review.gerrithub.io/369304
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I1899a47fa9d9821c16ea648bbe3290f6306d0e3d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368626
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a bit of a workaround for some upcoming changes
where bdev subsystem initialization will not wait for
all vbdevs to finish tasting all bdevs that are registered.
We need to allow those vbdevs to clean up after themselves
after doing their initial tasting, before we start the
unit tests, since the unit tests are blocking and won't
return to the reactor loop to allow asynchronous tasting
I/O to get returned to the vbdev modules.
Eventually we should consider modifying bdevio run
asynchronously, maybe including removing its use of CUnit
for test reporting.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6c425dd2711ce06fb6df1678f08294d6228c9ae4
Reviewed-on: https://review.gerrithub.io/368616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The default print level used by the apps is SPDK_LOG_NOTICE, which will
prevent the tracelogs from being shown.
Change-Id: I5f136e8aa0be0aa7634c7dd72231f2c23b129e51
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368803
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adjust the usage() output so it matches the spdk_tracelog_usage() style.
Change-Id: I2555b7587ebb9a891a08412f045d94f980cd1255
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368802
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Nearly all tests now make extensive use of the stub application,
so they're effectively all testing multiprocess all the time.
Further, we believe it to be the best policy to not attempt
to support scenarios where the primary process crashes unexpectedly.
We consider this equivalent to a kernel panic and all of the
processes will need to be halted and restarted.
Given the two things above, we can make some fairly dramatic
simplifications to the NVMe multiprocess testing. Only
one piece of functionality - multiple simultaneous secondary
processes - was not already tested by the other regular
tests. This patch removes all other multiprocess tests
and adds a simple test of multiple secondaries.
Change-Id: If99f85913b99862f02c3815ea7c10cd80ea3ce02
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/368208
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibb28b8432c94e70f522bdf34c5f4a10e4c25a8bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368610
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These are UEFI-style GUIDs in little endian byte order, not standard
UUIDs.
Change-Id: I4d61afa2901830c784c24a5e039bba1d98f32e62
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368609
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Fix the partition type GUID comparison to actually look at the partition
type GUID, not the unique per-partition GUID, and fix the test to match.
Change-Id: Ie64f1effcc75883f17ccf6240f6469161d2a5aa5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368606
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6a138e1c1d775e8c8bfeede9600f8b0f799ecdad
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add this lib, we can support rpc for bdev module
Change-Id: I21275c14c06787b6c0639170e52f08cae9ae3154
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/368283
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia9ea94a1dc4e583710374d453302319aa59ce62a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368206
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Retire the old claim/unclaim semantics in favor of
open/close. Clients must now open a bdev to get
an spdk_bdev_desc, then pass this desc to get an
I/O channel.
This allows multiple clients to open a bdev,
although only one may open a bdev with write
access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d319f1278170124169a8a75fd791e926b3f7171
Reviewed-on: https://review.gerrithub.io/367611
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A short delay is required between starting up a primary and
secondary process with DPDK depending on what the secondary
depends on wrt the primary. As the SPDK sample apps are not
designed to be dependent on each other, when we use them
as primary/secondary in test scripts with no deterministic
synchronization, it is possible for one ore more to hang
resulting in DPDK fatal init failures. Often times this would
show up as a failure to get hugepages in vtophys
A related fix, same failing signature in the same test script,
is also included here where the stub app, which is designed
to act as primary in certain sections of the test script, was
being killed by the test script but the next primary app was
coming up before the process was dead and coming up as a
secondary. A wait was added to assure that the stub process is
gone before the next app tries to start.
Change-Id: If2f6fc25e76b769ad8edafa8e965be246e98dab9
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/367725
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Each virtual bdev now has a pointer to its base
bdev, and a base bdev has a pointers to any virtual
bdevs built on top of it.
Also add a new set of leaf iterators, to get only
bdevs that have no virtual bdevs built on top of
them. These iterators are now used by the bdevio and
bdevperf utilities, in advance of the claim/unclaim
semantics getting removed in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I669783764407cdd4920b5ee121959e2a58c8d436
Reviewed-on: https://review.gerrithub.io/367610
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
No actual tests in this patch - just getting the
framework in place including necessary stub
functions to get the bdev.c unit test file to link.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic54001de814740a2049c7bbc6846d98c5a62a8b3
Reviewed-on: https://review.gerrithub.io/367625
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Older kernels do not support flush or trim operations; add #ifdefs to
allow the NBD test code to work on those kernels.
Fixes build on older distributions (e.g. CentOS 6).
Change-Id: Iae06f96b7db9a3bf4a494e2b2c2c15b37e6c1293
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367132
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibe282aa67de22e062de9d88c3b157c766be9dfae
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/366910
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib62195660d64331eac56e2c01b68f445f4b3d2bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/366907
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This ensures we have calculated the correct minimum
buffer alignment before allocating the buffers.
Fixes issue reported by Ziye Yang that bdevperf did not
work with AIO bdev backend.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic223551cc3ce1fb723ffcd745513c04198f13433
Reviewed-on: https://review.gerrithub.io/367291
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I5906e132636d9d246d625e884af693cbb672f44f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367124
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If5ebe2fba160d0c215f638a80dbeece1440a7cb5
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/365108
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This utility enables accessing an SPDK block device
through the kernel using NBD (Network Block Device).
This can be helpful for running utilities like
parted on an SPDK block device for testing upcoming
GPT support.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4769d91cdbfcc6c6736852fab0da3395d255ee4d
Reviewed-on: https://review.gerrithub.io/366490
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In some cases (for example, Intel VMD or Microsoft Azure), the PCI
domain may be larger than 16 bits. Extend the domain field of struct
spdk_pci_addr to 32 bits to accomodate this.
Note that equivalent changes must be made in DPDK's struct rte_pci_addr
for larger domains to actually work.
Change-Id: I21c4666a68bc8a4aedfcc82b44042c02734246de
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/366520
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
This is an artifact from a past design. There is no longer
any reason to create an event here - the bdev layer will
correctly queue events and call completions on the correct
thread.
Change-Id: I145dab4046899834c0449ec7380dcbb28215b493
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364831
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
