Without it multiple threads can race and end up sharing a device
when the intention is sharing only after full round robin.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I29b854ff837d56078bc033802d3df244728a29aa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8187
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recent work identified race conditions having to do with the
dynamic flow control mechanism for the idxd engine. In order
to both address the issue and simplify the code a new scheme
is now in place. Essentially every DSA device will be allowed
to accomodate 8 channels and each channel will get a fixed 1/8
the number of work queue entries regardless of how many
channels there are. Assignment of channels to devices is round
robin and if/when no more channels can be accommodated the get
channel request will fail.
The performance tests also revealed another issue that was
masked before, it's a one-line so is in this patch for convenience.
In the idxd poller we limit the number of completions allowed
during one run to avoid the poller thread from starving other
threads since as operations complete on this thread they are
immediately replaced up to the limit for the channel.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I913e809a934b562feb495815a9b9c605d622285c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8171
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In uring_sock_create(), we loops through all the addresses available.
If something is wrong, we should close(fd) and set fd to -1, and
try the next address. Only, when one fd satisfies all conditions,
we will break the loop with the useful fd.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: I22eada5437776fe90a6b57ab42cbad6dc4b0585c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8311
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The reference count of nvme_bdev_ctrlr will be used to update ANA log
page safely, and nvme_bdev_ctrlr_destruct() can be used to decrement
reference count after completing ANA log page update.
However, nvme_bdev_ctrlr_destruct() is not a good name for this case.
Furthermore, nvme_bdev_ctrlr_destruct() does not set the destruct flag
to true, and the next patch will need nvme_bdev_ctrlr_acquire().
Hence rename nvme_bdev_ctrlr_destruct() by nvme_bdev_ctrlr_release().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I285b7ab0963d0f4ea4a7a9fd29bd026d37ba8460
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8334
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Factor out registering nvme_bdev_ctrlr as io_device and populating
namespaces after creating nvme_bdev_ctrlr into a helper function.
We extract spdk_io_device_register() from nvme_bdev_ctrlr_create()
because free(NULL) is correct but spdk_io_device_unregister(NULL) is
not allowed, and hence it is very simple if we call spdk_io_device_register()
only after nvme_bdev_ctrlr is successfully created.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4d85ccf96f3ef62e51db9d08ec606d4100c7ebd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8317
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reorder a few operations and increment nvme_bdev_ctrlr->num_ns
after allocating nvme_bdev_ctrlr->namespaces[i] successfully.
Then unify the goto label for error cases to err and the err label
simply calls nvme_bdev_ctrlr_delete().
There is one noticeable change in this patch. Previously the
controller had not been detached when creating nvme_bdev_ctrlr failed.
However, after this patch, the controller will be detached when creating
nvme_bdev_ctrlr failed. This will be reasonable change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifd8c4649036f1c5e5cd688f89727b2bd2e982735
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8316
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Consolidate populate_namespaces_cb() calls for error cases into
connect_attach_cb(). Then remove ctx parameter from
bdev_nvme_add_secondary_trid() because it is not necessary now.
The next patch will inline _nvme_bdev_ctrlr_create() into
nvme_bdev_ctrlr_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia94f456df160c1cc874acac4c70aad27102cb0b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8314
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In posix_sock_create(), we loops through all the addresses available.
If something is wrong, we should close(fd) and set fd to -1, and
try the next address. Only, when one fd satisfies all conditions,
we will break the loop with the useful fd.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: Icbfc10246c92b95cacd6eb058e6e46cf8924fc4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8310
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In blobfs_fuse_start(), bfuse->bdev_name and bfuse->mountpoint
are allocated by calling strdup(), which may return NULL.
Here, we will go to err if strdup() returns NULL.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: I0599254b3436a310ddd26732312281f07a4972ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8303
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
After reading the code in detail, I think that we should
not set pipe_has_data= true and socket_has_data at the same time.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I8f9f96b16f4f0e0c585877a0dd687a240252a7cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8283
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Set nvme bdev physical block size based value of NPWG and NAWUPF namespace
field.
The logic to set bdev phys_blocklen is based on how Linux nvme block driver
sets it. If the underlying nvme namespace supports NPWG/NAWUPF then bdev
phys_blocklen is set to min(npwg, nawupf)
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I6d254a9e730dccc230b9db4d1217bf7ab2f39b6c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8224
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Upcoming patches will add support for accel_perf tool. Also
following will come vectored support and batch versions.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I43bd11b8efe40e6df0e2c8bd2995b9a9341f6457
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8142
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In order to avoid latency imbalances, the user can specify a cpu mask
on which the poll groups should run. This code update added data structures
to control set of CPU cores.
Change-Id: Iaf69d75da2fc6fed350d97d11027ce09e9432210
Signed-off-by: Yuri <yuriy.kirichok@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5610
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Also add scripts/bpf/nvmf.bt to enable and log these
probes.
This patch also adds a script that can generate
a bpftrace script snippet with string maps for
needed enumerations (currently nvmf_tgt_state and
spdk_nvmf_subsystem_state). This allows us to
dynamically generate this from the source code, and
can be extended for other enums we may want to
add in the future.
Thanks to Michal Berger for converting my original
gen_enums.py script into gen_enums.sh!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iff34a6218aef40055ac14932eea5fc00e1c8bcf5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7194
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Adding iov to the spdk_bdev_zcopy_start function enable spdk_bdev_zcopy_start to
be used by transport layers as the iov is owned by the transport command
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I6d2be7f49566048bf25b7711ada8d2fb49fea6ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will print a notice log if the drive can support SECURITY
SEND/RECEIVE commands but not OPAL, so remove the error logs.
Change-Id: Ib26aa727ad1e703d53c387af8507b920606ea9c6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8055
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By the next patch, nvme_io_channel will be used as an I/O channel
to a single nvme_bdev. This channel is created to a single
nvme_bdev_ctrlr and has a corresponding I/O qpair. nvme_io_path
will be a better name especially when we support multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic34162f3c383676c5249396a09173329fc6febce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8095
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously only a single thread could submit abort commands for admin
commands and it was the thread of the corresponding controller.
When we support multipath, we need to traverse the list of controllers
to which the target admin command is submitted. Threads of controllers
may be different.
On the other hand, the previous implementation made the I/O flow very
clean, but the I/O flow will not be clean if there are many controllers
and the subsystem does not have its thread.
This patch changes the policy so that any SPDK thread can submit abort
commands for admin commands.
Then when multipath is supported, we will be able to traverse the
list of controllers simply on the current thread to abort either I/O
command or admin command.
We already are able to submit any admin command on any thread anytime
including abort command. Hence this will not cause any issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib69de33f2e84b03861c7d95ce060035bdb589e4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8121
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
It is unlikely that managing namespaces by nvme_bdev is complicated.
Hence we do not need the helper function nvme_bdev_to_bdev_ns().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I77b4dcd12b2f2a219f58e5bc7b7e51dd10635da4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8118
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We can hold bdev_io directly in nvme_bdev_ctrlr as an outstanding reset.
We can put spdk_bdev_io_from_ctx(bio) into a parameter for a few
functions because it is used only once in a function.
Passing not spdk_bdev_io but nvme_bdev_io to bdev_nvme_verify_pi_error()
remove unnecessary substitution.
This is a little more efficient and simplifies the implementation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If49ad9fa42abf27decf3afcd8c994f55faa3bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8094
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Following Linux NVMe host, add UUID and EUI64 comparison to
bdev_nvme_compare_ns().
Besides, previously the return value of memcmp() had been used as
the return value of bdev_nvme_compare_ns() and this was wrong.
Fix it in this patch together.
Add unit test cases for bdev_nvme_compare_ns().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I069ab53e77741d6348b847d51e84a9338e2f3787
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7755
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the macros for red black tree provided by Free BSD to speed up bdev
name lookup in spdk_bdev_get_by_name().
In the bdev_multi_allocation test, we can get 3x ~ 5x speed up when
creating multiple bdevs for various bdev nums.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I49a2fbcccf06d4c36cbd445ce59e0b0dd4ada31d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7837
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Purpose: Let the users know the current available registered Rados
cluster and the related info.
Change-Id: I115c129ae6e4b0372579aad168fd88f8be136357
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7990
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is useful for applications even if they elect not to use the SPDK
event framework.
This doesn't shift everything in one go - just the subsystem
initialization logic. Configuration file loading also needs to move
in a separate patch later.
Change-Id: Id419df1045442d416650ed90e5ee78adfdd623d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6641
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Checked the definition of strncmp. If substring s1
is found in strnmp(s1, s2, len), then it will return 0.
For the len value, it is better to use strcmp. Otherwise,
if s1=cluster1, s2=cluster & len=strlen(s2),
strncmp will return 0. But they are two different strings. For
cluster names, they are different.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I15a06184d834cd1567b329d0322cd6bdea6fee4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
bdev_nvme_compare_ns() will be used to check if all namespaces of
one nvme_bdev are identical, and this is the convenient location.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3fa6072c1cceec53268e53bf398fa1e8f069035e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7169
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will be helpful to simplify the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I66939f2953c66582bfcb79cfe187814280e89680
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When multipath is supported, a subsystem has multiple controllers and
bdev_nvme_create_cb() will create a channel per nvme_bdev_ctrlr by
iterating the list of nvme_bdev_ctrlrs, and will hold lock while
doing it.
If the code to access nvme_bdev_ctrlr is put in a place, the
following patches will be easier and smaller.
Hence reorder the code of bdev_nvme_create_cb() as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2f2e66758c3374c678cc44bbb0116f4611c6753a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7754
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Factor out spdk_bdev_io_complete() calls into a helper function
bdev_nvme_io_complete().
This simplifies the code a little and will be helpful for the following
patches to retry I/Os. These are not performance critical but we
specify inline explicitly by following bdev_nvme_io_complete_nvme_status().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9fafacfd8571c037c3bc34382c251317309da334
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7497
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Factor out spdk_bdev_io_complete_nvme_status() calls into a helper
function bdev_nvme_io_complete_nvme_status().
This simplifies the code a little and will be helpful for the following
patches to retry I/Os. Specify inline explicitly to avoid performance
regression.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1ac451486e1c6a4401842490411e986fac191d59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7484
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_nvme_submit_request() calls spdk_bdev_io_complete() with failed
if bdev_nvme_reset() returns negated rc other than -ENOMEM.
So let bdev_nvme_submit_request() process it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2569634ff0f18fb433cb685de1366e43abf5a9fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7524
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is called only in a place. Inlining this into bdev_nvme_submit_request()
will simplify the following patches by removing unnecessary cast.
Besides, use -ENXIO if I/O path is not found. This will be better than -1.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib6c38f89db1c1e651941aad18d31dd0891f380de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7871
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
I/Os will be retried if spdk_bdev_io_complete() is called with
SPDK_BDEV_IO_STATUS_FAILED. To do it easier, consolidate exit paths
of bdev_nvme_get_buf_cb().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0a67b88a107d616c5a5b0fc5ff963ad1402f5651
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7487
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Move from a single flag indicating that the socket is on the
pending_events list to two flags - pipe_has_data and socket_has_data. If
either flag is true, the socket is on the socks_with_data list.
This is necessary to track enough state to avoid doing extra recv()
system calls.
Change-Id: I65e5701dccb0a5bade19f266f164f26706b110d4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7595
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Revise bdev_rbd_create rpc call to add an optional
parameter "--cluster-name", e.g., "--cluster-name Rados".
Then users can create a rbd bdev with registered
Rados Cluster. This shared strategy can be used to
remove the thread creation overhead if multiple rbds
are connected to the same Ceph cluster.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ide5800f8fc6b2074805272a59731c666fe279b9a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7584
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is used to add two rpc calls:
bdev_rbd_register_cluster
bdev_rbd_unregister_cluster
Then in the next patch, rbd bdev constructed on the same cluster object
can share the common Rados_t structure in order to remove the thread creation
overhead and improve the scalability.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I898cc4ffabb8e6721ba5bef099cbf948c64d2c98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7551
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The bdev layer can do the unmap split now based on the backend
device. For now we only use 1 unmap descriptor, the bdev layer
can help us to do the split.
Fix issue #1888
Change-Id: Iaf740bafd4f2bb4b108133fee2aafd2f53da9b2b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7519
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also free scsi_task data structure for the asynchronous
libiscsi APIs.
Change-Id: I0bff706bfb795e51a4b10c357913ae66493dca5d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7513
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If no ioat devices are registered, we should return.
Change-Id: I03435946716ef653b230515da32e8ccbdf5a188a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7834
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The coredump info can be viewed in
https://github.com/spdk/spdk/issues/1935
We face this issue because no idxd device is attached, but we
still register the hw engine by spdk_accel_hw_engine_register
in accel_engine_idxd_init.
Fixes#1935
Change-Id: I537f06e2b2923faac7f2cd6a28903e77f1f6aaa5
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes use of newly added spdk_bdev_wait_for_examine(),
to only respond to RPC when bdev was fully examined.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If82cd913ab6653e8cc0da38c639b384b6c0303ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5482
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
