If we are not in ffp phase, we do not need to update last_nopin
Change-Id: I289beec8437d7117b6261483c333bf5db5fbd11f
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/403166
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
- Cumulative Moving Average (CMA): average of all data up to current
- Exponential Moving Average (EMA): weighted mean of the previous n
data and more weight is given to recent
- Simple Moving Average (SMA): unweighted mean of the previous n data
Currently bdevperf support only CMA to know average of IOPS. However
CMA may not be appropriate to know the trend of IOPS. EMA or SMA will
be better to take the role.
The formula of EMA utilized in bdevperf is the following
Multiplier = (2 / (Time periods + 1))
EMA: EMA[n+1] = (IOPS - EMA[n]} x multiplier + EMA[n].
One of the source of the formula is https://github.com/patharanordev/ema
Change-Id: Ia7a282f6d173ace470e05b19ee6dee5edf640617
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/398886
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the upcoming JSON config file, CHAP parameters for discovery will
be specified simply by the value of them.
This is as same as JSON-RPC for target node but different from .INI
config file.
If CHAP parameters are specified by the value of them, the combination
of them must be checked before applied to iSCSI globals.
Change-Id: Idf663796f97581366da945abb8dc351f3975ceae
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403235
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently CHAP parameters for discovery are handled as bool but
they are defined as int. Hence change their type from int to bool
as done for target node previously.
Change-Id: I1e815946d4bdececcdd7cc873a725afbbcb98e50
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Portal, portal group, initiator group, and target node don't use fixed size
array anymore. To use the same naming rule in iSCSI subsystem and in SPDK
is helpful to understand and maintain. Current naming rule is not bad but
to use unified and compact name is prioritized at this time.
This patch changes function names as follows:
- spdk_iscsi_init_tgt_nodes() -> spdk_iscsi_parse_tgt_nodes()
- spdk_cf_add_iscsi_tgt_node() -> spdk_iscsi_parse_tgt_node()
- spdk_iscsi_portal_grp_array_create() -> spdk_iscsi_parse_portal_grps()
- spdk_iscsi_portal_grp_create_from_configfile() -> spdk_iscsi_parse_portal_grp()
- spdk_iscsi_portal_create_from_configline() -> spdk_iscsi_parse_portal()
- spdk_iscsi_portal_grp_array_destroy() -> spdk_iscsi_portal_grps_destroy()
- spdk_iscsi_init_grp_array_create() -> spdk_iscsi_parse_init_grps()
- spdk_iscsi_init_grp_create_from_configfile() -> spdk_iscsi_parse_init_grp()
- spdk_iscsi_init_grp_array_destroy() -> spdk_iscsi_init_grps_destroy()
For example "parse" is already used to explain the operation in portal_grp.c.
Hence using "parse" is familiar and not strange in iSCSI.
Change-Id: Ieff952069d39bd96b7afa1586bfff927968accc2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403149
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some variables of struct spdk_iscsi_globals are initialized by using
.INI config file but others are initialized without using .INI config
file.
This patch aggregates all initialization operations into a function
spdk_iscsi_initialize_iscsi_globals().
Next patch move the code to read .INI config file from
spdk_iscsi_initialize_iscsi_globals() to spdk_iscsi_parse_iscsi_globals()
to make implementation cleaner.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I0bda0de1d8bf1ba5e4b4e5157949fd300ec9ff9d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403148
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upcoming JSON config file will support iSCSI global params initialization.
This patch is an effort for JSON config file to reuse the current code as
much as possible.
SPDK's other libraries use options structure effectively, and hence
iSCSI library also utilizes it.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I9936a4cac4048adaa5d69233f156887376d7cde1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403147
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is to add the basic support of QoS on bdev.
Including two major functionalities:
1. The QoS rate limiting algorithm:
a. New IO will be always queued first also under
the no memory condition
b. Start the QoS IO operation based on the limit
c. A poller started in each millisecond to reset
the rate limit and send new IOs down
d. The rate limit is based on the millisecond and
converted from user configurable IOsPerSecond
2. The Master Thread management:
a. Add a per bdev channel_count
b. Whenever QoS is enabled on bdev, if QoS bdev
channel is not created, create the QoS bdev
channel and assign the QoS thread
c. When new IOs coming from different channels
(threads), pass the IOs to the QoS bdev channel
through the thread event
d. When the IOs are completed from the QoS bdev
channel, pass the IOs back to its orignal
channel(thread)
e. Destroy the QoS bdev channel when it is the
last bdev channel for this bdev. Defer the
destruction if current thread is not QoS thread
Change-Id: Ie4444551d7c3c7de52f6513c9db926628796adb4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393136
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I94bbf1f035aca463530450811200f1f1800d6485
Fixes: 4294719ed7b3 ("subsystem: make subsystem declaration ...")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403355
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
In addition to listing the tests that did not run, add a list of the
tests that did run.
Change-Id: Idf8b3583214a5e05c2d7f1a89a2ea60a2ef68432
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402389
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If5e16c2ac148fd4818c942e8f57b02671e76ed62
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/403153
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently SPDK_BDEV_MODULE_REGISTER() take many parameters. Extending it
(eg for incoming JSON configuration dump/load) is quite challenging and
error prone. As we are already here in next patches, rework this macro
to take one parameter - the pointer to struct spdk_bdev_module_if.
This patch also remove following macros:
SPDK_GET_BDEV_MODULE - this is not really needed, to find module outside
module translation unit use spdk_bdev_module_list_find()
SPDK_BDEV_MODULE_ASYNC_INIT and SPDK_BDEV_MODULE_ASYNC_FINI - replaced
by bool fields in spdk_bdev_module_if struct.
Change-Id: Ief88e023fbbaee7d5402c838dbecbdffd4dfb259
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/402883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't do anything under the scene as adding/removing fields in struct
spdk_subsystem will require both macro change and C file changes.
Change-Id: I11bc0d5758edd7e0e0bd3f93e251d868cd9b1d2b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Although migration successfully end Test Case 1 fail because
of some VM shutdown issue. This look like test issue.
Temporarily increase verbosity in vm_shutdown function to debug
this issue.
Change-Id: I3d54775b2e4e7286bd86359a7ac5ca2a9d8ad750
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/402531
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ie57b9e63847a59f2d9c3376e3c2f34dda46bf1c7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403228
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I23366906ac8169954331c0f1be75d406607f2f9e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403227
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This allows vhost initialization to be fully handled in the event
framework subsystem.
Change-Id: Ic0ff11f3765cc553b7ca183027209fb6dd131364
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403226
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This lets us drop the basename parameter from spdk_vhost_startup(),
which is a step toward making vhost initialization happen as part of the
event subsystem instead of in the spdk_app_start() callback.
Change-Id: I4fe18c4c3f12b706e73ae74500be58f1582110fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For now, this includes the iSCSI and NVMe-oF targets.
Change-Id: I9fc4fc1c034930d20420380e96701a9b2d60d9d7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403219
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is required as part of our effort to build a single target app that
can run e.g. NVMe-oF and iSCSI targets in the same process.
Change-Id: Ic8426df08899070d709e3675a57f47f64c23c5eb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403218
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This can be used to force specific UUIDs for testing.
Change-Id: I40c403fd00c142552d632dd5f0fbe1ea9a6c9962
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403221
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This test is incorrect - it sends immediate data
greater than negotiated FirstBurstLength, but
expects an R2T. This is illegal and SPDK is
rejecting the PDU correctly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I52220e07fa32819ee7a4ba4e6e88a1a7328d207f
Reviewed-on: https://review.gerrithub.io/403213
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This patch extracts iSCSI subsystem initialization by .INI config file
into a function spdk_iscsi_parse_iscsi_globals().
Naming rule was adopted from NVMf-tgt.
By these two patches,
iSCSI subsystem init is done in spdk_iscsi_parse_iscsi_globals().
iscsi subsystem config is done in spdk_iscsi_parse_iscsi_configuration().
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: Ibafb0b62cbb0aa23dd6dd6007dad0345293e65b8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403146
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI poll_group initialization must be completed before starting JSON-RPC.
This doesn't have any dependency to the other iSCSI subsystem
initialization and completes asynchronously. Hence thisis good to be placed
at the end of iSCSI subsystem initialization.
Besides, object creation of iSCSI configurable components started after
poll_group initialization by .INI config file is aggregated into a function
spdk_iscsi_parse_iscsi_configuration().
Naming rule was adopted from NVMf-tgt.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I44421803268361f53840a7e47f07ce95c13d1139
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403145
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will move the location and change the callback of poll
group initialization. Besides it is probable for JSON config file to
change the callback of poll group initialization.
Passing callback as argument increases visibility and flexibility of
code.
Change-Id: Ie4bfd2c60a112bb7c697110ef0efc30a2c098dc8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403144
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Pool of iSCSI connections and related variables are initialized in
initialize_iscsi_conns().
Currently initialize_iscsi_conns() is located after configuration of
target nodes by .INI config file.
Configuration of target nodes can be done by JSON-RPC but connection
initialization must be completed before starting JSON-RPC.
iSCSI connections don't belong to iSCSI global params directly and
hence move connection initialization right after initialization of
iSCSI global params.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I183365b84aa205790b27adf7cc1f632b932195aa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403143
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI subsystem have a pool for PDU, session, and task, respectively.
They belong to the struct spdk_iscsi_globals and are initialized by
using the parameters of the struct spdk_iscsi_globals.
Hence their initialization should be located just behind the setup of
parameters of the struct spdk_iscsi_globals.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: Ie39f63ee24c547dcd31a1a06d72d915e8c272864
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403142
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Object creation of portal, portal group, and initiator group can be
done by JSON-RPC.
This patch moves object creation of portal, portal group, and initiator
group right before object creation of target node.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: If78beabb478923e7c920c09b16e42d6f8aa55775
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403141
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are four configurable components, portal, portal group, target node,
and initiator group in iSCSI.
They have a TAILQ to manage their objects, respectively.
Currently each TAILQ initialization is done together with its object
creation by .INI config file.
This patch separates TAILQ initialization from object creation for four
configurable components in iSCSI.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: Ia4ac3f06f15acef671e785904f4c687e5d189fbe
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403140
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie7a940efde885dbf0bb7c085fd17c3991dfa3341
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/403165
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was introduced after the spdk/uuid.h wrapper was added due to a
non-rebased patch being merged.
Change-Id: I674db91581e6eb2e9ab6113e19d777404a78cf37
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403205
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Modifies behavior of spdk_app_start() and spdk_app_parse_args()
such that they return on failure instead of terminating with
exit().
Change-Id: I82566417f04e1ae2e3ca60a00c72e664db26c9e4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/401243
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I738b4e28065797c9df7b0bc27ec0aee8c9f4f257
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402381
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes Github issue #236.
Reported-by: Meng Wang <wm8120@gmail.com>
Submitted-by: Meng Wang <wm8120@gmail.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If205dd8446c61d101a869899680d2552838b9de3
Reviewed-on: https://review.gerrithub.io/403123
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds possibility to set internal xattrs on blob
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I2d0f14558e4a1af7071ee1a4f59aaf9f14bea2d9
Reviewed-on: https://review.gerrithub.io/396418
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unit tests implemented in following patches.
This is rebased patch from https://review.gerrithub.io/#/c/396648
merged as commit c1174e6895ca44242d12b2e5f0742f84ccbf0b8f
and reverted in 0847f27b54c82c29a67f779f6a464454015d448b.
Change-Id: I3d152bf7847c83bf75149edd61564c1f393927d8
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/402529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For some xattrs we need to know its value even if blob is in loading
state, e.g. BLOB_SNAPSHOT xattr value when blob is loading.
Change-Id: I1cd7805cf33be64cf59792f85a270e9b536e23bd
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/403062
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Along are some neccessary changes to rpc_commands_lib which
are needed to check lvol store names and lvol bdev aliases.
Also update test plan with test cases description.
Change-Id: Ifbe712a105610a78a2292a459aebee77e29903c5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/397088
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ief1f809308fbde2e696c60d3ce79c0720cb3e2ff
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398934
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
vm_setup.sh previously reconfigured the global git settings for
whichever user it was run as; this isn't necessary, since we can just
set the user/email within the iscsiadm repository's .git/config where it
is needed for 'git am' to work.
Change-Id: I11cdd84b4ae807e018ee38ba2ac1caaa76ba5d3b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402887
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I22c11cdd5ab0ffdf72b27223c0c9cd7282537613
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/402667
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No need to run the stub and other setup work if the nvme-cli repository
is not found on the test agent.
Change-Id: I5a3c0ab8ceb25e65f4693b8fc519812ebccf9ae7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402380
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
