Log page reading function 'spdk_nvme_ctrlr_cmd_get_log_page' does read
into intermediate buffer and then copy to user provided buffer. So,
there is no need for user buffer to allow DMA.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I7337afa99c3ae666cc43ea2a48317de875334cfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
In accel_done function, we use g_using_sw_engine to
determine to directly call _accel_done or use thread message
passing way.
However when we get the capability and determine the
value of g_using_sw_engine in mulitple cases. We do not
protect the value of g_num_workers. Then if we use CPU mode
to do test, g_using_sw_engine will not set to be false
in racing condition. Since the value of g_num_workers can be
> 1 when we do the check, i.e., it is a TOC2TOU issue.
The solution is that we check the g_using_sw_engine in
accel_perf_start function.
Fixes issue #2084
Change-Id: I55c18e0443120adb698d5bd27d4522df09f6dcab
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9151
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This PMD is availabe for BlueField2 DPU.
It requires libmlx5, so configure file is
updated to check if this library exists
Change-Id: Ic0cfbfdf24af393381667435009fb6afc49d9181
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8780
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the next patch, the qpair is polled from a poll group and needs a
disconnect callback, which should also fail the qpair, so it makes sense
to have a separate function doing that.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ied76431520962b25220027be829a4609afb6bbda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
async_mode option is currently supported in PCIe transport layer
to create io qpair asynchronously. User polls the io_qpair for
completions, after create cq and sq completes in order, pqpair
is set to READY state. I/O submitted before the qpair is ready
is queued internally. Currently other transports only support
synchronous io qpair creation.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2f9043872bd5602274e2508cf1fe9ff4211cabb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8911
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_reactor_set_interrupt_mode() writes/reads from fds created during
reactor_interrupt_init(). Since spdk_fd_group_create() depends
on eventfd, this will not work for systems that do not have it.
reactor_interrupt_init() handled lack of support for eventfd correctly,
while spdk_reactor_set_interrupt_mode() did not check for it.
Reported-by: Nick Connolly <nick.connolly@mayadata.io>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5181d436636c55cca3a06b1947e944502a9204ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9131
Reviewed-by: Nick Connolly <nick.connolly@mayadata.io>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In order to not affect the loopback test.
Also create a sock_common.c file which can be used by posix/uring
implementation. We do not put such code in sock.c. Because sock.c
is the general layer. Other users may include their own user space
sock impelmentations. So put those common code in sock_common.c instead.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I983ec2313119539e6eed2d9f11ba1488c0ed6560
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8769
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch tries to add MSG zero copy feature.
Though io_uring supports buffer registration, it only
support io_uring_prep_write_fixed. It means only one
registered buffer can be used. It does not satisfy our
current usage mode.
According to this situation, we still use the MSG_ZEROCOPY
flags in io_uring_prep_sendmsg.
Furthermore, this new feature is dependent on the kernel
version, The currently verified version is
kernel 5.12 rc3. So it is not enabled in the default manner.
For example, if you want to use it on the target side, you can
use the following rpc to configure:
./scripts/rpc.py sock_impl_set_options -i uring --enable-zerocopy-send-server
Change-Id: Ie7bb828f466362add94891989ddf0950dccd9e80
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/957
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's already defined in spdk_nvme_ctrlr_data, just move it out
so that other library can use this definition.
Change-Id: Ic40ba6f6e7870395ad3cec9511ce841f5dc4dff1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9123
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
PRP1 value 0 is a valid Guest physical address and it may use two vectors
for one page, so we need to set `iovcnt` as the IO commands. Also
fix the calculation for Get Log Page command.
Change-Id: Ib036bcf1ca9f6644dfd8a7406fea37269cea5c73
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function is called in the IO processing context, also
rename vfio-user controller data structure with "vu_" prefix.
Change-Id: Icb8fd18772f64c1e633f4a8b8eac26d0bafeed16
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9121
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function is called in the IO processing context, also rename
internal queue pair variable with "vu_" prefix.
Change-Id: Iac6be1fddf9ee28e0485ff0c3a707de4e98be96a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9120
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The submission queue doorbell will be cleared to 0 at the end
of this function.
Change-Id: I0146f3dc208b8ca1d7fec4b2dae1d7395f304444
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
There is only one place to call it now, so just remove it.
Change-Id: Ib16d640c80dbe79df46c965c5ee8bcd092e57b0d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should maintain phase bit in vfio-user target, it's not safe
to use Guest completion queue's phase bit.
Change-Id: I94856853784802f7695a0484b783d8de4042f8a6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8988
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
It's wrong to call enable_admin_queue() in the memory hotplug context,
as the function will change doorbells and clear queue pair memory.
We can remap the ADMIN queue pair's memory just same as IO queue pairs.
Change-Id: I090ea40ce0f0613c15319bfb18771a154ca788c7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8987
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
The map_q function is used to map Guest's physical memory address
to Host virtual address for SQ/CQ. This function can be used both
for initializing SQ/CQ and remap SQ/CQ, when used for remap SQ/CQ,
we don't need to unmap the related memory region.
Change-Id: Ia42e01a68482e5678dbaf8d0d4e8c04c1a94789d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9012
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Sending the unmap in zone reset is optional (it's only a hint), so if
the base bdev doesn't support it, the reset is completed immediately.
Fixes#2064.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If2c57eadc20d352a71853d7023599503330e1252
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9154
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Was set at a pretty high number during early development.
Instead of a #define, lets use the same math we use to
determine the size of the operation and descriptor pools as
that's the max number of batches that will be needed.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ide5311b4b6c931010413d0f82baed0e05d5fcde7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9099
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When address translation failed we were not putting the op back
into the pool. In one place also changed the return error from
translation from hardcoded value to the rc returned by the call
to be consistent with the rest of the code.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6d0c9c0f469a213721c6a5ce37c4e9dbdcef8183
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9097
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
These are fixed, no reason to tranlate them with every IO. This
patch is just for non-batched IO. Batched IO will come later.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ifb7bdf147658a23714d94bb7f88d7fedd1749153
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9073
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It seems some versions of blkid report improper atari as an installed
partition table on devices filled with random data. Ignore that case
for now so the tests are able to find usuable nvme device.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If6604ddf7099d3a98cfa36caab1e806d5f931886
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9143
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This abort test app will send a lot of abort commands on
the admin queue. The default admin queue size is
relatively small (32) so increase it if necessary to
account for the expected number of outstanding abort
commands as well as any extra admin commands that may
be sent during test execution such as Keep Alive.
Fixes issue #2048.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5f64b7fc72a028299b860f09e30d430a64c95d2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8812
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK requires each command line parameter to be
passed as a separate string in the args array. So
we need to tokenize opts.env_context to handle the
case where a user passes multiple arguments in the
env_context string.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifc72a7c25b31f1296d3aba3a3f7664ad8edf128f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9132
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When run spdk_top against vhost, the poller name is displayed as
"bvdev->bdev ? vdev_worker : no_bdev_vdev_worker" which should be "vdev_worker".
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: Ie97c69bd8cdd3fdafc5fe4dd80e1fde85a8e3238
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9130
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Types suppressed during 21.07 release cycle can now be
removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I80f95b57fd9ae07367248a91071802b48aff4866
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9128
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
refspdk is reference SPDK repository used for base in ABI tests.
When component is not present in the refspdk, but was added
in latest SPDK it is skipped in ABI tests.
Yet if the previous SPDK release contains such component already,
the ABI for it should be verified.
vfio-user flag was missing so this patch adds it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1e2c11c506deed06416aef7c0aab41d99834f92b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9127
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The --io-pattern option can be specified by the -w short opt. However,
the help message suggested that -o should be used. This fixes it.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Change-Id: I023d571fc3b165653257688fdbd7b1eeafd420e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9116
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9c01e786c4d9df1b5a0f61b0ab354a3fd2546672
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9085
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
create_json_config_with_subsystems contents does not
need to be in a function. Moving it to main simplifies
--with-subsystems condition.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1414a209cc666ebb4639fc25133168482bd96c97
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8775
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
No need to keep "bdfs" variable as global variable.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I655ed9f1514f13a6460292c1298ef08f904157fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8774
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I21b7798e1004b227bcd7f62ee8867667c67dab7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8773
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
-g option using only files known to git, that allow us
to avoid errors from submodules
Also add check if mdl is installed, and gracefull info if not.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib6e1920774ffca81e62d9abebc8d8b4548feb519
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9086
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The current num_md_clusters doesn't include the the part before
md_start. So the bs_recover will get more num_free_clusters than it
should be. This patch can fix it.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I911926beb69aca677da508ba71f292496c917e7f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9034
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The generic transport layer still does a busy wait, but at least
the logic in the PCIe transport now creates the queue pair
asynchronously.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: I9669ccb81a90ee0a36d3f5512bc49c503923b293
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8910
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In prep for upcoming patch
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Iebc5bf5f6715c85cc09b404128338cd6f08c421e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We can instead use a combination of the op code and the batch
element in the op structure to determine if the op that is
completing is part of a batch or not so we know whether to
return it to the free list or not.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I8e27c7b991f5a20e82394a25a52ece560cab5543
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9071
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
No real material impact but easier to read and cleans up error
handling when submitting a batch. Before we put the operation on
the list of operations to poll when it was prepared, a few LOC
before it was submitted to HW. Now we do it in the hw submission
function. For batch elements, they are added just before the
batch operation itself (as was before).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icfeaeeb650d5b63f81e13a8ffd27e349c7118089
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9069
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
