Use old rpc in conf.json to check
if rpc alias if handled properly.
Change-Id: I466e39dd6b4adf140225060e46752250ae30ddb4
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465666
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_bdev_part_construct() must be now called on the
same thread that called spdk_bdev_part_base_construct().
This was always the case so far and I don't see any other
case where thread safety could be useful, so just remove
it. The doxygen doesn't say anything about it either.
Even in GPT case, we create a base directly as a part of
examine and then create part bdevs in the spdk_bdev_read()
completion callback, but that callback will be always
executed on the same thread which issued the read.
Change-Id: I752f2a7f08c9faf4231ed53a46b700b33fa13697
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Not any different from the test_env version in this patch but it will
be in the upcomiong series as the 2MB tests are added as we will need
to manipulate the size param.
Change-Id: I13a7544546b5296421fe5b696c8777e402bacc35
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When a vol is unloaded, the vol element in comp_bdev element needs to
be NULL'd so that when the comp_bdev destruct entry point is called,
we won't try to unload the vol again.
fixes issue #928
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If267335cbe2234c62351cfc39d33b0ea698ca893
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch introduces new hotplug test which uses
PCIe interposer capable of physically connecting and
disconnecting NVMe drive from the system. It uses
custom build HW based on mircrocontroller to which
we connect and through which we send command to NVMe
interposer to connect or disconnect NVMe drive from
test machine. Scenario of this test is similar to the
scenario we are using for software hotplug test with VM.
Parameters for the test are IP address of the microcontroller
and GPIO pin to which the interposer is connected.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3610dadfd23521da2c90fd83e6895d942b3f66df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462470
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some SSDs have inactive namespaces under normal circumstances,
especially those that support namespace management. Printing
error messages for these can be confusing to users. So just
remove that log message.
This removes the only usage of cdata in register_ns(). But
that cdata assignment was prefaced with a useful comment for
readers of this example code. So move that comment to
attach_cb() and restructure the code there a little bit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I844e860ea0856d73ca535b6fcbd14279b96da4f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466797
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
perf is under the examples directory, but it's much more than
an example application and probably needs to be moved. We use
the libaio functionality extensively as part of benchmarking
and comparing the SPDK driver with the kernel driver. So we
need to keep this functionality.
This reverts commit b3d9ebae21c5e90ae3dad26a272e003a2e2ef67d.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb9a1df919d32a98c328101029cc22e91915a976
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466795
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In this patch, we directly point the hdr_p
to the memory owned by the pdu_recv_buf to avoid
memory copy.
Change-Id: Iee0dd98058928f429bf7ad22103cd4826226400f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Most of the assignments followed the DIRS-($(CONFIG_X)) pattern, but
there were a couple of assignments using a different pattern.
Change-Id: I7c80fec2813c32cb7676912d72805565f77b2e3d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466469
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The shared object dependencies could easily change over time. It is
important that we keep this list up to date and we don't change
something without updating the makefiles. This script checks each shared
object file to make sure that its readelf dependencies match up with
those specified in the makefile.
Change-Id: If508fb0205e85f8f5d217033194bfb5b0179d11c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The SPDK application framework defines a list of event subsystem
dependencies. When linking against individual shared libraries, it is
useful for this dependency structure to be codified in the shared
libraries themselves.
For example, when linking a bdev based application against
libspdk_bdev.so, one might wish to only specify this shared object at
link time. However, when you actually run the application, it will fail
to start because it is not linked to the copy and vmd subsystems.
However, once thesedependencies are added, one can effectively link
against only the exact subsystems they need and any dependent subsystems
will be linked in automatically.
Change-Id: Ic986281a162ac20b523486e9f8cccf4a0787afd7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RDMA transport executes spdk_nvmf_rdma_request_parse_sgl() only if
the request is the first of the pending requests in the case
RDMA_REQUEST_STATE_NEED_BUFFER in the state machine
spdk_nvmf_rdma_requests_process().
This made RDMA transport possible to use STAILQ for pending requests
because STAILQ_REMOVE parses from head and is slow when the target is in
the middle of STAILQ.
On the other hand, TCP transport executes spdk_nvmf_tcp_req_parse_sgl()
even if the request is in the middle of the pending request in the case
TCP_REQUEST_STATE_NEED_BUFFER in the state machine
spdk_nvmf_tcp_req_process() if the request has in-capsule data.
Hence TCP transport have used TAILQ for pending requests.
This patch removes the condition if the request has in-capsule data
from the case TCP_REQUEST_STATE_NEED_BUFFER.
The purpose of this patch is to unify I/O buffer management further.
Performance degradation was not observed even after this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idc97fe20f7013ca66fd58587773edb81ef7cbbfc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466636
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove nvmf_fc_request_free_buffers() and nvmf_fc_request_get_buffers().
Set fc_req->data_from_pool to false after spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I046a642156411da3935bc2fa2c2816fc2e025147
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove spdk_nvmf_tcp_request_free_buffers() and
spdk_nvmf_tcp_request_get_buffers().
Set tcp_req->data_from_pool to false after spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I286b48149530c93784a4865b7215b5a33a4dd3c3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove spdk_nvmf_rdma_request_free_buffers() and
nvmf_rdma_request_get_buffers().
Set rdma_req->data_from_pool to false after
spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie1fc4c261c3197c8299761655bf3138eebcea3bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds new APIs spdk_nvmf_request_get_buffers() and
spdk_nvmf_request_free_buffers() to be used among transports.
Subsequent patches will replace transport specific APIs by them.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib153e2c5806b7276915a0aa91179fe9dbcb2a1f0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a prepration to unify buffer management among transports.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b1c208207ae3679619239db4e6e9a77b33291d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466002
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to unify buffer management among transports.
struct spdk_nvmf_request already has SPDK_NVMF_MAX_SGL_ENTRIES (16) * 2
iovecs. Hence incresing the number of buffers twice will be no problem.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb525abbf35dc9f4b8547b785b5dfa77d106d8c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Moved scrubbing of nv cache to core thread. Added IO channel which is
used in user context, during shutdown of nv cache.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I88e680324e361bf7e0c0a9a9d29323f179c56e3b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
One of stop conditions in data WR release function was wrong. This
can cause release of uncompleted data WRs. Release of WRs that are
not yet completed leads to different side-effects, up to data
corruption.
The issue was introduced with send WR batching feature in commit
9d63933b7f4cd3b279b2b481ed452c64c226dcd3.
This patch fixes stop condition and contains some refactoring to
simplify WR release function.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie79f64da345e38038f16a0210bef240f63af325b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466029
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Static assert checking size of spdk_nvme_format where it should be
spdk_nvme_sanitize.
Change-Id: I9af501665fe3da79ab9f5dd25600327b42f9af06
Signed-off-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466533
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allows this header to be included by C++ code.
Public header files (in include/spdk) already have
all of these - portions of event.h may eventually
move to an officially public header file, but until
then just add the extern "C" wrappers here for now.
This allows it to be included directly by C++
frameworks such as Seastar to do SPDK subsystem
initialization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02275cde348d21510bbb69dcdb65cf85171e16b6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466475
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: Reduce the recv/readv system call.
Method: Use a big recv buffer to conduct the read.
Though it will introduce addtional buffer copy,
we hope that the overhead introduced by buffer copy will
be smaller compared with frequent recv/readv system call overhead.
And the design is to make a trade off between them.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9286fd9cec0b512cea8e3f2c335c5bf862b98573
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464842
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: Prepare the further optimnization in the
target side whening receving pdu headers, we expect
to use zero copy.
Change-Id: Iae7f9106844736d7160d39d0af1f5941084422ec
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
spdk_subsystem_init() no longer depends on spdk_event
or app.c part of the event framework.
This makes it possible to directly call subsystem
initialization, instead of invoking each used library.
Change-Id: I53550850d54e2397e2719fdeb559ed50aa81e704
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Originally loading json_config using spdk_app_json_config_load_subsystem()
implied issuing start_subsystem_init RPC. This required a workaround
in the callback of RPC spdk_rpc_start_subsystem_init_cpl(), in order
to skip starting the app in json_config load path.
This made it difficult to load json_config without implicitly using
rest of the event framework. It will be usefull for example in
fio_plugin, which does not use the app.c API.
With change in this patch json_config load path directly calls
spdk_subsystem_init() C call.
Meanwhile start_subsystem_init RPC no longer needs a workaround
for json_config load path.
Change-Id: I535e079339cedaf0950767a8204002ab5885d8a5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some time ago spdk_subsystem_init() used spdk_events as
callbacks, but it was removed.
This patch removes left over UT stubs.
Change-Id: Id25ac8e4e338c172d21161dede6dc046f0860279
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change adds return code to spdk_subsystem_init().
Making it's caller responsible for handling application
state - such as calling spdk_app_stop().
This change implies that start_subsystem_init RPC does not
stop the application on failure, only reports back the error.
Renamed g_app_start/stop variables to now more relevant
g_subsystem_start/stop.
Change-Id: I66a7da6ecfb234a569c65279cc4b210ddac53d2a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is related to issue #815. To avoid hung and re-enable
testing this part of ocf, this patch changes backed device from aio to
nvme.
Hung in this test was caused by implementation of AIO bdev and bdev layer.
All AIO bdevs are using the same shared context with limited queue depth,
so in some cases AIO can return NOMEM status. It's ok when we have more
than one IO from bdev layer perspective, if not we will stuck because
nothing will triger retry io procedure.
This patch only enables testing and are not fixing root cause of hung.
To prevent before unexpected behavior of this and next one test we
need to clear ocf metadata on nvme device.
This patch also reenables this test in CI.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: Ibab4aefb9aaf33d725db20345bd5c09c1e5eebdd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
