To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the future releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 22.05
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id1a5358882dc496faa5b0b5c9a63b326c378c551
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Provides RPCs for the qpair error injection APIs to bdev_nvme.
These RPCs are useful in testing NVMeoF/NVMe behavior for various
error scenarios in production.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I0db7995d7a712d4f8a60e643d564faa6908c3a55
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10992
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It may take a long time to detect network transport error
when e.g. port is removed on remote target. This timeout
depends on 2 parameters - retry_count and ack_timeout.
bdev_nvme_set_options supports configuration of retry_count
but transport_ack_timeout is missed. Note: this parameter
is used by RDMA transport only.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I7c3090dc8e4078f64d444e2392a9e0a6ecdc31c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11175
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: <tanl12@chinatelecom.cn>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch aligns namespace comparison with Linux kernel
implementation:
- UUID is optional and may be NULL
- command set (CSI) should be the same
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I8f889989f24cd51b104057217f87eb303b30fa68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11312
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add more dtrace probes to help with identifying issues
in production.
Change-Id: I8fb621a15c5e33ae94d75b4fc31135e2635dcfce
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10561
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a workaround for #2338.
Ideally the fix should remove this define and use number of cores
from the application.
With large number of QAT devices following error can be obsered:
compdev_isal_create():
ISA-L library version used: 2.30.0
vbdev_compress.c: 358:vbdev_init_compress_drivers: *NOTICE*: created virtual PMD compress_isal
EAL: memzone_reserve_aligned_thread_unsafe(): Number of requested memzone segments exceeds RTE_MAX_MEMZONE
RING: Cannot reserve memory
isal_comp_pmd_qp_setup(): Failed to create unique name for isal compression device
vbdev_compress.c: 268:create_compress_dev: *NOTICE*: FYI failed to setup a queue pair on compressdev 48 with error 4294967295 so limiting to 84 qpairs
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I689ab6bda991e3864da9f4135f57849e3c0c3986
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Historically only QAT_SYM devices for crypto
were supported. The DPDK submodule explicitly
disabled its compilation.
For details please see:
https://review.spdk.io/gerrit/c/spdk/dpdk/+/9217
Starting with DPDK 21.11 QAT_SYM and QAT_ASYM were
merged together, so it is no longer possible to
disable it QAT_ASYM as it was before.
As vbdev_crypto didn't make use of it,
this driver is now skipped in preparation for
update to DPDK 21.11.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib606a4b450cd224d96bc21a64384297b2182967c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11178
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
From SAM-4, section 5.13 (Sense Data);
“When a command terminates with a CHECK CONDITION status, sense data shall be returned
in the same I_T_L_Q nexus transaction (see 3.1.50) as the CHECK CONDITION status. After
the sense data is returned, it shall be cleared except when it is associated with a unit
attention condition and the UA_INTLCK_CTRL field in the Control mode page (see SPC-4)
contains 10b or 11b.”
SPDK does not set UA_INTLCK_CTRL to 10b or 11b, so we set the unit attention condition
immediately against a single IO or Admin IO after reporting it via a CHECK CONDITION.
Once the failed IO received at iSCSI initiator side, it will be retried. In the case of
resize operation, if there is no IO from iSCSI initiator side, the unit attention
condition will be delayed to report until the first IO is received at the iSCSI target
side.
Meanwhile, we clear the resizing (newly added) flag on our SCSI LUN structure after
first time we report the resize unit attention condition.
The kernel initiator won’t actually resize the corresponding block device automatically.
It will report a uevent, and then you can set up udev rules to trigger a rescan. SPDK
iSCSI initiator will automatically report the LUN size change.
Change-Id: Ifc85b8d4d3fbea13e76fb5d1faf1ac6c8f662e6c
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Now that we have a much more robust retry framework,
set the default bdev_retry_count to 3. Users can
still override this default with the bdev_nvme_set_options
RPC as before. This ensures that by default, we will
retry I/O when possible.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I045bf4969d02be32b951e72a148ce6b6e251dec1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11107
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The state of a nvme_ctrlr can be more fine grained than a boolean
and such state gives more information to end users for debug or
root cause analysis.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I3e2459f449e2dac73f04b155e38b696495f1a335
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10183
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
If ctrlr_loss_timeout_sec is set to -1, reconnect is tried repeatedly
indefinitely, and I/Os continue to be queued.
This patch adds another option fast_io_fail_timeout_sec, a flag
fast_io_fail_timedout to nvme_ctrlr.
If the time fast_io_fail_timeout_sec passed after starting reset,
set fast_io_fail_timedout to true not to use the path for I/O submission.
fast_io_fail_timeout_sec is initialized to zero as same as
ctrlr_loss_timeout_sec and reconnect_delay_sec.
The name of the parameter follows the famous DM-multipath, its fast_io_fail_tmo.
Change-Id: Ib870cf8e2fd29300c47f1df69617776f4e67bd8c
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10301
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously reconnect retry was not controlled and was repeated indefinitely.
This patch adds two options, ctrlr_loss_timeout_sec and reconnect_delay_sec,
to nvme_ctrlr and add reset_start_tsc, reconnect_is_delayed, and
reconnect_delay_timer to nvme_ctrlr to control reconnect retry.
Both of ctrlr_loss_timeout_sec and reconnect_delay_sec are initialized to
zero. This means reconnect is not throttled as we did before this patch.
A few more changes are added.
Change nvme_io_path_is_failed() to return false if reset is throttled
even if nvme_ctrlr is reseting or is to be reconnected.
spdk_nvme_ctrlr_reconnect_poll_async() may continue returning -EAGAIN
infinitely. To check out such exceptional case, use ctrlr_loss_timeout_sec.
Not only ctrlr reset but also non-multipath ctrlr failover is controlled.
So we need to include path failover into ctrlr reconnect.
When the active path is removed and switched to one of the alternative paths,
if ctrlr reconnect is scheduled, connecting to the alternative path is left
to the scheduled reconnect.
If reset or reconnect ctrlr is failed and the retry is scheduled,
switch the active path to one of alternative paths.
Restore unit test cases removed in the previous patches.
Change-Id: Idec636c4eced39eb47ff4ef6fde72d6fd9fe4f85
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10128
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
This is a clean up as a preparation to the following patches.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib8bc90e17f52086d4e887463e04f65273bb1079b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11068
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We noticed the difference between the SPDK 21.10 and the latest master
in a test.
The simplified scenario is as follows:
1. Start SPDK NVMe-oF target
2. Run bdevperf for the target with -f parameter to suppress exit
on failure.
3. Kill the target after I/O started.
With the SPDK 21.10, bdevperf retries failed I/Os and exits after
the test time is over.
With the latest SPDK master, bdevperf hungs and does not exit even
after the test time is over.
The cause was as follows:
reset ctrlr is repeated very quickly (once per 10ms by default) and hence
I/Os were queued infinitely because nvme_io_path_is_failed() returned
false if nvme_ctrlr is resetting.
We should queue I/O when nvme_ctrlr is resetting only if reset is throttoled
and fail-fast for the repeated failures is supported.
Hence in this patch, fix the degradation and remove the related unit
test cases.
Reported-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4047d42dc44488a05264c6a841d101a7c371358b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11062
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
config_param and config_file are not conflict to specify rados configurations,
support specify both of them is more reasonable. Therefore, After this patch,
users can choose the one from the three ways: config_param, config_file + key_file
or config_param + config_file + key_file.
Signed-off-by: Tan Long <tanl12@chinatelecom.cn>
Change-Id: Ide17af72c4965df1e6541f4f50d4fa5309865486
Signed-off-by: Tan Long <tanl12@chinatelecom.cn>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10679
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In project practice, config_file and key_file are often used to connect
to a rados cluster, config_file includes "mon_host" and other rados
configurations like "rbd_cache", and key_file includes the secret key
and the access authority to each pool for current user. This patch adds
key_file option, user can specify config_file and key_file or only config_param
to connect rados cluster. This will make it much more flexible for users with
his/her convenience.
Signed-off-by: Tan Long <tanl12@chinatelecom.cn>
Change-Id: I6b49aad70b578bdeb3ac8ea9ca0fcbd931582025
Signed-off-by: Tan Long <tanl12@chinatelecom.cn>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10485
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If acceleration tasks are exhausted, then we can exit
the submission loop earlier, also print number of IOVs
for each R/W request.
Change-Id: Ia98ed43b0bb2be229b7c0054f3ade0ad39337b09
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This RPC will stop the specified discovery service,
including detaching from any controllers that were
attached as part of that discovery service.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9222876457fc45e1acde680a7bd1925917c22308
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Requests that are completed immediately (i.e. those not using the accel
engine) are now queued and their completion is delayed to the completion
poller. It ensures that they're not completed from the context of a
submission, which gets rid of an spdk_thread_send_msg() call.
It significantly improves performance on some workloads. For instance,
4k zcopy reads (queue depth 128) on an malloc bdev exposed through
NVMe/TCP went from 204k IOPS to 485k IOPS.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I196f55fc07d167f1ed117d2430e9c37f9d05f70d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10805
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The only thing these functions were doing was completing the IO, so it
could just be inlined.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5fbd9df763dd68953b1bda9c7752c57ef9ee5dd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10804
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This poller is registered on each IO channel and can be used to schedule
asynchronous completion of a request. This can be especially useful for
requests that can be completed immediately. For now, nothing enqueues
the requests to be completed through this poller - this will be changed
in the following patch.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If6b26541907bb46402fc0904216bff74dad57b88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10803
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It'll allow the malloc bdev to store per-thread data. For now, it's
only used to keep the pointer to the accel library's IO channel, more
fields will be added in subsequent patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I604a38877ae8d6075b911f5a484d1793d4bc2ddb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10802
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds support for zero-copy operations in the delay bdev.
They use the same delay values as regular IO operations:
- (avg|p99)_read_latency for zcopy_start with populate=true,
- (avg|p99)_write_latency for zcopy_end with commit=true.
All other zcopy operations (e.g. zcopy_start with populate=false) are
not delayed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I8b32c1d99f9f2b36b16617122881ea95d02ecc87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10798
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If a path whose namespace is optimized is restored, the corresponding
I/O path cache should be cleared and the path should be chosen as the
optimal path.
This bug was found by a system test.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ibc3983dbff3418adb090a09df32c2a92a8910d05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11004
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rename a few functions for a full ctrlr reset sequence to
clarify what we do and make the following patches easier.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I051e3ab68c3cd77fd6040a2d069d50a700123ae6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10920
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We sort secondary trids to avoid using disconnected trids for failover.
However the sort had a bug.
This bug was found by running test/nvmf/host/multipath.sh in a loop.
Verify the fix by adding unit test.
Fixes#2300
Signed-off-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Change-Id: I22b0ede4d2ef98b786c3e0d1f5337a2d568ba56d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10921
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds the framework for a discovery
service in the bdev/nvme module.
Users can specify an IP/port of a discovery service.
The bdev/nvme module will connect to a discovery
controller, get the discovery log page, and then
register for AERs. It will connect to each
subsystem specified in the initial log page.
AER completions will trigger fetching the log
page again, at which point new subsystems will
be connected to, or removed subsystems will be
detached.
This patch does the following:
* Adds the new start_discovery RPC
* Connects to the discovery controller
* Gets the discovery log page
* Registers for AERs
* Detach from discovery controllers at shutdown
Subsequent patches in this series will:
* Connect to subsystems listed in discovery log page
* Detach from subsystems that were listed in earlier
discovery log pages but subsequently removed
* Add a stop_discovery RPC
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I54bfa896a48c5619676f156b5ea9f2d1f886c72f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10694
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
If qpair creation failed, ctrlr_ch remains in group->ctrlr_ch_list
but memory for ctrlr_ch is freed. Next attempt to get ctrlr's io
channel will modify data in already freed memory and may corrupt
another allocation.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I85002f2e6ac86a0ffda6dabfa57e79b59074fb5a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It is possible that the application calls
get_io_channel during nvme controller reset.
In that case IO qpair won't be created and the
application will get a NULL pointer.
It is possible to repeat get_io_channel later but
there is no such indiciation for the application,
so it can't distinguish between a real failure and
"try again" case during controller reset.
This patch ignores IO qpair creation error if
controller is resetting. IO qpair will be created
when reset completes.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Id39202f5a6878453ff54e35df91d5dc49a5f046a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10828
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will want to use bdev_nvme_create() to attach to
controllers identified through discovery. In this case,
we won't be reporting bdev names back to an RPC caller,
so there's no need to allocate an array of names to be
filled out since they won't be used.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia386d034df2c2d5a60f9aa18338ba415ec03d763
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We will need to add another step in the fini path for
stopping discovery pollers, so this patch prepares for
that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifecbbac60262f3aae7f7a7ced09b7a600df7c2e8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10590
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
One of the objects wasn't enclosed with spdk_json_write_object_end(),
causing the resulting configuration to be broken.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib0311e002e43d4ad01c61feb6af54cb4212b477b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10755
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We set cb_ctx to NULL when calling spdk_nvme_probe_async(). It looks
that nvme_probe_ctx has not been used anywhere for a long time.
nvme_probe_ctx is not public data structure.
Remove nvme_probe_ctx to simplify the code and make the following
patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7dd5f970a7fde1c9c189fae3c8f28f84d7aed991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This refactoring will be helpful for the following patches to unify ctrlr
reset and failover and failover trid also when reconnecting ctrlr.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4623a5dd310ac7516c270ccd3b0541c27cc880d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10443
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The failover_in_progress flag is used to decide the return value of
bdev_nvme_failover().
bdev_nvme_delete() calls bdev_nvme_failover() with remove=true to remove
nvme_ctrlr->active_path_id. However bdev_nvme_failover() returns zero
if nvme_ctrlr->failover_in_progress is true. bdev_nvme_failover() may
return zero even if it does not remove nvme_ctrlr->active_path_id.
The following will be better.
bdev_nvme_failover() returns -EBUSY if nvme_ctrlr->resetting is true,
and the caller repeats calling bdev_nvme_failover() until the target trid
becomes alternative path or bdev_nvme_failover() returns zero.
To do that, the failover_in_progress flag is not necessary any more.
Removing the failover_in_progress will also simplify the following
patches to unify ctrlr reset and failover.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57ab944beb1d06ea4def144c81c69705860de35f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10441
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Checking if nvme_ctrlr can be unregistered is not so simple and
a few changes will be added. So factoring out the check into a
helper function will be valuable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I310c7e3ad2dae9583df4db575d342c2cb111f3f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10461
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When a I/O or admin passthrough failed, if the corresponding nvme_ctrlr
is not available, we should failover to another path.
When no path was found, if there is at least one nvme_ctrlr which is
not failed, we should wait until it is recovered.
We should improve error recovery not only for multipath (multipath is
"multipath") but also for failover (multipath is omitted or "failover").
To do this easily, clarify the conditions of availability and failure of
nvme_ctrlr and realize them by helper functions.
Use new helper functions for other cases to improve readability too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I716731f72811d2ec4dfc91f9eadb191d75739af6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10381
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We had not checked the bit 0 of the Namespace Multipath I/O and
Namespace Sharing Capabilities (NMIC) field in the Identify Namespace
data structure.
If the bit 0 of the NMIC is zero, it is likely that namespaces are not
identical.
We should check if the value of the NMIC first, and do it in this patch.
Additionally, it is not usual if the bit 0 of the CMIC and the bit 0 of
the NMIC do not match. So in unit tests rename the parameter multi_ctrlr
by multipath for ut_attach_ctrlr() and use it for the value of the NMIC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6aa7cbcc99be2507dbf18930f7b585a9ea7d0f90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10380
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_nvme_reset() deletes all qpairs, reset a ctrlr, and then create
all qpairs. Any qpair may fail to be created, and then the reset
request may fail. However, already created qpairs were left.
Let's delete the already created qpairs and then fail the reset request.
This will make us easier to control reconnect, deley reconnect by
a few seconds, or stop reconnect after repeated failures and then
delete ctrlr.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I414e2281b4bf0cbd1cf461d8fc64a22f43d26d13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace the spdk_nvme_ctrlr_reset_async() and spdk_nvme_reset_poll_async()
calls by the spdk_nvme_ctrlr_disconnect(), spdk_nvme_ctrlr_reconnect_async(),
and spdk_nvme_ctrlr_reconnect_poll_async() calls in a reset ctrlr
sequence.
spdk_nvme_ctrlr_disconnect() can fail if ctrlr is already resetting or
removed. But both cases are not possible. reset is controlled and the callback
to the hot remove is called when the ctrlr is hot removed. So we assume
spdk_nvme_ctrlr_disconnect() always succeed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1299e198597b2a2110f80b9a868e2dae015682ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10092
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_for_each_channel() always passes status=0 to its completion callback
if each channel completes the requested function successfully.
bdev_nvme_reset_destroy_qpair() always succeeds.
Hence bdev_nvme_reset_ctrlr() does not have to check if the passed
status is not zero.
The following patches will aggregate multiple flags into a single
state for nvme_ctrlr. This change will simplify these.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c30c9b20c96886516029e69e90dc23d777a69b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the following patches, we want to retry reconnect if reconnect failed
in a reset ctrlr sequence but we want to delay the retry. While
we wait the delayed retry, we want to quiesce ctrlr completely.
As part of quiesce ctrlr operations, we want to pause adminq poller but
we need to do it on the nvme_ctrlr->thread.
If a reset ctrlr sequence runs on the nvme_ctrlr->thread, we can avoid
redirecting the pending destruct request at completion too.
So we redirect the reset ctrlr sequence into the nvme_ctrlr->thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I538b962e2a7b5cf00ebbac2a1e888482ddeeee61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Incorrect decode function used for the param "config_file" in
rpc_bdev_rbd_register_cluster
Signed-off-by: Tan Long <tanl12@chinatelecom.cn>
Change-Id: I6286c5d0d8396a1b548095975924087ba4ee92d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10444
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In the following patches, bdev_nvme_reset() will execute the reset ctrlr
operation on the nvme_ctrlr->thread until completion as bdev_nvme_admin_passthru()
does. Hence change the callback bdev_nvme_reset_io_continue() to
redirect to the orig_thread by using bio. Furthermore, use bio->cpl.cdw0
to store the completion status of the reset processing. bdev_nvme_reset()
does not use bio->cpl.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I361cc44494190ba83ad6e360788d78851416c46c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10074
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
