Revise bdev_rbd_create rpc call to add an optional
parameter "--cluster-name", e.g., "--cluster-name Rados".
Then users can create a rbd bdev with registered
Rados Cluster. This shared strategy can be used to
remove the thread creation overhead if multiple rbds
are connected to the same Ceph cluster.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ide5800f8fc6b2074805272a59731c666fe279b9a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7584
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some Linux distributions reports kernel panic using the same
command line as we suggested in this document, that's because
number of IO queues is bigger than number of CPUs, so here
just fix it and added a comment on the number of IO queues
parameter.
See issues #1295 and #1737.
Change-Id: Ie1e18d5e83a80523f71d98b8761d13a8d57cc9ab
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is used to add two rpc calls:
bdev_rbd_register_cluster
bdev_rbd_unregister_cluster
Then in the next patch, rbd bdev constructed on the same cluster object
can share the common Rados_t structure in order to remove the thread creation
overhead and improve the scalability.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I898cc4ffabb8e6721ba5bef099cbf948c64d2c98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7551
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add {min,max}_cntlid to spdk_nvmf_subsystem, defaulting to 1 and
0xFFEF, respectively, and add nvmf_subsystem_set_cntlid_range() to
allow the controller range to be configured in the range [min_cntlid,
max_cntlid].
Also add {min,max}_cntlid to the nvmf_create_subsystem RPC to allow
the controller ID range to be specified when creating an nvmf
subsystem.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I936db3bb0c9a38569063a6fd3c11df262dfad776
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7322
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- Use consistent cache line size units in KiB across RPC calls
and config files. The KiB units are much easier to use then
the bytes units and are more human readable.
- Properly handle cache start when cache line size is incorrect.
- Add test to check if cache line size value is reported correctly.
- Add cache line size info to JSON RPC documentation.
Fixes#1858
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Change-Id: Iec9ede85f6884b64605d2d112947b3f175cbd938
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7614
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When zcero copy send is enabled and used by initiator,
it could significantly increase latency in some payloads.
To enable more fine graing configuration of zero copy
send feature, add new parameters enable_zerocopy_send_server
and enable_zerocopy_send_client to spdk_sock_impl_opts to
enable/disable zcopy for specific type of sockets.
Exisiting enable_zerocopy_send parameter affects all types
of sockets.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I111c75608f8826980a56e210c076ab8ff16ddbdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7457
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added note to the nvmf documentation about an issue [1] with destroying
qpairs on E810 cards in RoCE mode. The note needs to be removed once
the issue is resolved.
[1] https://github.com/spdk/spdk/issues/1840
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie03a7a662391bd738848f71e582748a334a6ffd5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All the other RPCs use underscores in the names of their fields, so
`framework_get_scheduler` should also use them instead of the spaces.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0e9edd7c59a4ab61643a7b558a2359e1805ed0b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7557
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I197e03fdd11a7b2beda8ca301857debfb56a8f18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7555
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4ed583d91ae9e820be1ee6f4553f29d6650c4922
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5791
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Check if qpair has a poll group during the connect process,
use poll group's statistics or allocate own structure per
qpair. That is done due to not all applications use poll
groups and we want to avoid "if (qpair->group)"
conditions in data path.
Admin qpair always allocates its own statistics
structure but the statistics are not reported
since this qpair is not attached to a poll group.
Statistics are reported by spdk_nvme_perf tool
if --transport-stats and in bdev_nvme_transport_statistics
RPC method.
Change-Id: I58765be161491fe394968ea65ea22db1478b219a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6304
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Next step would be to upgrade the entire Doxyfile to meet the new
specs. For now, prevent doxygen from generating warnings about
these opts.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I2761675a435beb49abede89bc520c12a2cdc2dff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
For some reason, newer versions of doxygen started to complain about
the following:
warning: multiple use of section label 'index' for main page
To mitigate, use alternative name for the label.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I6387a7c644c6626dd646c9fdd0e9ed1d430881f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7132
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
The -p option was removed a while ago, all CUSE devices
are automatically created under /dev/spdk now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iffc55e98957d5224bf15a435100610ce5a3cfb28
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7152
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Moved the subsections on configuring SPDK's NVMe-oF target to be under
the appropriate section instead of being attached to the one on FC
transport support.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I56070fa7aec00b96b2c34cfa6f5ec0d64fd0aee5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6773
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ie436a4f02f774ec9128e6e0a0b3c6639d427d5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7103
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The documentation around static linking in doc/libraries.md is improved.
This is achieved using examples and explaning the requirements that arise
from the use of constructor functions. Additionally, the documentation
around the same subject is improved in doc/pkgconfig.md
Signed-off-by: Dantali0n <info@dantalion.nl>
Change-Id: I3b11db441d14d2e8d792a22de2bd17fe5c2389fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6798
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
!Do not merge this patch before RocksDB patches are merged:
https: //review.spdk.io/gerrit/c/spdk/rocksdb/+/6485
https: //review.spdk.io/gerrit/c/spdk/rocksdb/+/6486
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie13ff102ddf627026013dcb8b41cb3ee205eaaeb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Leverage SO_INCOMING_CPU to get the CPU affinity of connections
(sockets). And allocate the connections to specific poll groups,
which aims to utilize cache locality.
From our test:
6 P4600 NVMe on target,target uses 8 cores, NIC irqs are bound to
these 8 cores, and initiator side uses 24 and 32 cores,
we can get 11%~17% randwrite performance boost for posix, and 8%~12%
for uring.
Change-Id: I011e0a21502c85adcccd4a14fbe9838b43f54976
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5748
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Updates spdk_top documentation page to explain and present new features.
Images are being deleted to make versioning easier.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I6c3c172ed54423afc3afa4566b71ed19f0bc2e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6095
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvmf_create_transport rpc parameter to configure the CQ size helps
if the user is aware of CQ size needed as iWARP doesn't support CQ resize.
Fixes issue #1747
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: Ia9ba2b5f612993be27ebfa3455fb4fefd80ae738
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6495
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We only publish them as HTML
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I88daf01556271bf87e5bff45608fb068523cb0c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Function bdev_nvme_create accpets new parameter - ctrlr
opts which is passed and filled by RPC handler. That
will allow us to add config parameters for other ctrlr
options with minimal changes.
Change-Id: I96ac1b21e7a3816c652765cddade75423eb843ca
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6023
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous patch changed config #0. Also clarrified config #1 as
well. A future patch will expose the priority setting mentioned in
config #1 as this is currently internal.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4761324e522b24f580918a8397810b52dd1a6bd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6008
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added changelog entry for dynamic scheduler, along with general
information on scheduler framework and behaviour of particular
scheduler implemenations.
Change-Id: I9fcef56323c4be136b6b531297b070562981eee5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6151
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
