Change bool g_run_failed to int g_run_rc. If any error is detected
during bdevperf running, negative return code is directly set to
g_run_rc. Then g_run_rc is passed to rpc_perform_tests_cb() or
bdevperf_fini().
Besides, we had updated g_run_failed even after spdk_app_start()
returned. However return code of spdk_app_start() might not be of
bdevperf_run(). Hence change main() to return the return code of
spdk_app_start() simply without updating g_run_failed.
Additionally, even if g_target_count becomes zero in
spdk_bdevperf_shutdown_cb(), g_run_rc may indicate error. So,
change spdk_bdevperf_shutdown_cb() to pass g_run_rc to
bdevperf_fini().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia85680679087c3106ba687d7e58027ae8ff4a5c7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478833
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdevperf_fini() had expected to get one but rpc_perform_tests_cb()
had expected to get negative errno for any error. Using negative
errno will be reasonable and change the code accordingly.
The next patch will unify local rc variables and the global g_run_failed
by changing g_run_failed to g_run_errno.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia43da0793f8e77a5d5491758589e9b77f4cf86e7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to subsequent patches. They will make start
and stop of bdevperf asynchronous. Encapsulating free targets and
call app_stop() will be helpful for them.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1a86d787614be048cec66e5d5fcfeb85de843ad5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will use SPDK application framework (SPDK thread, IO channel, and
etc) to manage IO target groups, and will need to free IO target
groups before exiting bdevperf application. As a preparation,
move bdevperf_free_targets() before returning from spdk_app_start().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id695a88107f87a9573c281f7f7d26d91d3a307b5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Due to the last patch, we can use rpc_perform_tests_cb() in
rpc_perform_tests() simply and remove the duplicated code.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id56da12fb5c52b6d178912f2f6cc7ead8a9cc36e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will make bdevperf_construct_targets() asynchronous
and call bdevperf_test() as its callback. Moving g_target_count
check into bdevperf_test() will make the change easier.
As a result of this move, rpc_perform_test() is simplified a little.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I308ab472a0021278af1a1f5aa65268126a60673f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478760
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix the issue that target->run_timer and target->reset_timer needed to
be called on the core which runs the target.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia36681ac51a46f272e5738d0ae63838939e71e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_put_io_channel() sends message if the core on which it is
called is different from the core which called spdk_get_io_channel().
However, ch->ref is guarded by mutex at free and we should call
spdk_put_io_channel() on the core which called spdk_get_io_channel()
as possible as we can.
Hence move spdk_put_io_channel() from end_run() to bdevperf_complete().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8816b28625869662c6b9124036b619b76bf96a3c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch changes io_target_group from array to linked list
and removes g_coremap.
In particular, change how to choose io_target_group for each
target, and reverse if condition in performance_dump(). These
changes will the code clearer.
Besides, remove blockdev_heads_destroy() because it just calls
bdevperf_free_targets() now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I170a1c58fe2df9a11902224dd8634462a9af6123
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478565
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The role done by the variables has been replaced by lcore of
struct io_target_group. So we can delete them safely.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2ed856c8ccfda1d72b3fc97677fecaf295df37af
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478706
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Hold associated core ID in io_target_group and use it later.
This simplifies event calls in bdevperf because we don't need
to get core ID from io_target.
The next patch will delete g_coremap safely because io_target_group
manages lcore correctly now. lcore of the struct io_target will
be deleted too but it will be more later.
The subsequent patches will move bdevperf from core based to
thread based and the added core ID will be removed eventually in
this patch series. However these changes are helpful even so.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia763a79bc3810a15485285aebb9fc15a8d48332f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478705
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add struct io_target_group and chain associated io_targets to it.
Particularly, replace current target->next pointer by TAILQ, pass
not the head io_target pointer but the io_target_group pointer to
event call, and use TAILQ_INSERT_HEAD() in bdevperf_construct_target()
to keep the current ordering.
Besides, add pointer to the queued io_target_group to struct
io_target to use it later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib37db825a863f7795c55c19fae0d38efd80c607e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478563
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This API will be used in the upcoming reactor_get_stats RPC first.
This API is not public but internal in SPDK. Add necessary unit test
together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I761ffe3c8d6d8da4594c0d728b479f9f40275fc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Test if spdk_reactor_schedule_thread() scheduled thread correctly
to one of the allowed cores. Use thread library and expect
spdk_reactor_schedule_thread() is called at the end of
spdk_thread_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibb536d16849c29081fb63341f5dbe1a4c0db1d18
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the newly added mocks for CPU core operations.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If90bba6fd68c29c83cdb3c201a2a9fbdb40f6755
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478154
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Mock DPDK lcore operations for unit tests. Remove duplicated stup
from unit tests for NVMe-oF FC transport. The next patch will use
them.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4f6fbd8f45942ca13fcf10ba1740a9fe8e573063
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478153
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdevio test tool is not critical but change it to use instance
of cpuset to spread statically allocation of cpuset throughout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9722d491cb6ec3202312285013105f7b6aeb1f15
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Extend the unit test of the timeout IO to multi-thread.
Change-Id: I6cd19b629a5f1e473f69685f495fa067a5f5da25
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Number of entries of the array g_head is spdk_env_get_core_count(),
and hence we did not need to break from some for loops. For them,
continue to the next iteration will be more appropriate and do the
changes in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6e97099622d58f44d92482beaf24ca61de4ca038
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Extract bdevperf_target_get_task() from bdevperf_submit_single().
Then inline the contents of bdevperf_prep_task() into
bdevperf_submit_single() and remove bdevperf_prep_task().
These two patches simplify a little weird nesting and parameter
passing of bdevperf_submit_single().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I37f4ca732d6d9479553365cd612b90dec51e2228
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This patch and the next patch will simplify the nesting of task
submission.
Factor out the operation to get free task from io_target into a
helper function bdevperf_target_get_task(). Use
bdevperf_target_get_task() in bdevperf_submit_single() and
reset_target().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4cb147a5a6c84cc2b0e517dc35a106d37affaa10
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Add the protocol_features in vdev. There are two features
would be used in vhost device one is the virtio_features
the other is the vhost-user protocol_features. For different
vhost device, the supported features are different so we can
separate them.
Another reason is that I tested the VHOST_USER_PROTOCOL_F_
INFLIGHT_SHMFD in vhost-scsi with QEMU(version:4.0) and found
that Qemu can not boot up. After investigating found that inflight
flag is negotiated but the Qemu doesn't support this feature
and in DPDK function it is handled as an error and disconnect
with Qemu. It's a bug in DPDK and will fix it.
Change-Id: I72e418cb1885bf7dcbd0285d9cec1ad6af0665de
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478814
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will be able to distinguish case and suite in the post process
scripts based on if they have any internal tests.
Change-Id: Iff2aa5caa251924d8a842085d87eb2a17aca45d4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This is starting point for moving current FTL
implementation which is working on top of
Open Channel NVMe driver to work on top of
abstracted zoned bdev.
This patch is changing name of ftl_chunk structure
to ftl_zone and start using zone states from zdev
interface.
Change-Id: I5429f489cc08a1ac27f09aba3dca4b40ea95eeb3
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
When building spdk on arm64 with --enable-werror, there are error:
"implicit declaration of function ‘rte_eal_init’ ". For X86,
mem_callbacks.c's dependency header file rte_rwlock.h includes
rte_spinlock.h(rte_spinlock.h->rte_lcore.h->rte_eal.h), but for
arm64 and ppc rte_spinlock.h isn't included. So I include ret_eal.h
explicitly here.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: If8859f5272aeb220dc448a312cb0d1c65e149742
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478570
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Issue reports:
return: can only `return' from a function or sourced script.
Use "exit 1" instead, and ignore changes to json.power_on_time.hours.
Issue link: https://github.com/spdk/spdk/issues/1111
This is to fix issue #1111
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: I90198e8237cb587fbeb7777f6b2da783fd15ba04
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This change verifies that all existing unit tests don't care about
CPU core configuration. The subsequent patches will mock CPU
core operations.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I44cc56908cf8609870625ff19d6100e21036c00f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478152
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add framework and a simple test case to test creating reactor.
Subsequent patches will add more test cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie0eb0e49bfe40469b351b21e40558a1bf5584cce
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For the requests which don't have children requests, SPDK may queue them to
the queued_req list due to limited resources, in the completion path, we
may resubmit them to the controller. When the controller was removed
the submission path will return -ENXIO and we will free the requests directly,
so the callback will not be trigerred for these requests. Here we added a
flag to indicate the request is from queued_req list or not, so for the failure
submission, we can triger user's callback.
Fix issue #1097
Change-Id: I901ac81733c2319e540d24baf5b8faa1c649eb35
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477754
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
use the nvmf lib to add an nvmf example which
doesn't use the spdk app framework. It can show
how to use the nvmf lib to build your own nvmf target.
We encouage you to use the RPC cmds so this example will
not supply the configuration file. You can read the
README.md to get the steps how to build your nvmf target
and test the IO status.
Change-Id: I8d175934f7364d40fb44d36e85c31d8ea5063654
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468457
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Followin the last patch, move iscsi_conn_abort_queued_datain_task()
and iscsi_conn_abort_queued_datain_tasks() from iscsi.c to conn.c.
Refine unit tests to check more accurately. Adding more test cases
will be done later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I30530e6871a78a58d9fb472f62168862298884a0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477417
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Added spdk_poller_(pause|resume) that allow a poller to be paused and
then resumed at a later point. These functions come in handy in cases
when a poller is known to be idle until a certain event occurs.
Change-Id: I7f21c80eb9ac4e8e1cf24d66f99da5687aafe358
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477920
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds the logic for retrieving chunk notification log and
translating it into media management events to be sent to appropriate
Open Channel bdev.
Change-Id: I7e4860eda23e61d6208fc5f5861e8fd2b75685d3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds the ability to create bdevs on specified parallel unit
ranges on one OCSSD controller. It allows the user to create multiple
isolated bdevs, each operating on a separate set of parallel units.
To create a bdev on a specified range, a new parameter -r|--range was
added. For example:
rpc.py bdev_ocssd_create -c nvme0 -b nvme0n1 -r 0-4
will create a bdev on parallel units 0 through 4 (inclusive). If the
parameter is ommited, the bdev will span across all available units.
Change-Id: Icd94cf1e22fcc72806ef1ce1efd2d7031010009f
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469898
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We also need to make sure that the deconm_iov is large enough to handle
all of the iovs we claim to support plus 2, one for offset into the
chunk when doing writes and one for the remainder.
Plus a unittest to demonstrate the possible out of bounds error in the
library.
Change-Id: I7747ad39f76e50f25ecf5168b01e046f71fa0ea8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478125
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Other tools have already changed these units to IOPS and MiB.
Unify the units, that makes the result comparing more clear
with bdevperf and perf.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: Iedc47f5757839e1abbcbaf5d97179c90ab130773
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
