The end goal is to have the application create one poll group per core.
Then each poll group will have a single CQ per network device and an I/O
channel per back-end storage device to poll.
This is just the first step toward that, which is to wire up the
creation of the per-core poll groups in the application.
Note that the app poll groups don't do anything yet. We'll need
additional library API changes to make the library use the existing poll
groups, rather than creating a new poll group per subsystem as we do
right now.
Change-Id: I2d4e2a5e5aa354d37714750f1d5b1d1e4ab9edce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/381887
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
getopt() returns int, not char, so assigning the return value into a
char will truncate it.
Fixes a warning on platforms where char is unsigned:
vhost.c:109:61: warning: comparison is always true due to limited
range of data type [-Wtype-limits]
Change-Id: I3a290096346db241a473434952e0f5fd69e98c2f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386347
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the default config file does not exist, keep the
app's config_file options field as NULL, so that the
app code will not fail when trying to open a non-existent
file.
Also leverage the recent iSCSI and NVMe-oF refactoring,
to just skip trying to read config file parameters if no
config file exists (or the requisite section in the config
file is not present). vhost already handled this so it did
not need to be modified.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic32f0a7a8ce85322a8effd537b62d14732d7b82e
Reviewed-on: https://review.gerrithub.io/385497
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for skipping the config file if it doesn't
exist or there is no Nvmf section.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib96c9c9e8bd462558240a2210150def1a950f1d1
Reviewed-on: https://review.gerrithub.io/385496
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the NVMe library trtype and adrfam translation functions are passed
an unknown value, they may return NULL. This shouldn't normally happen,
since any supported transport type or address family in the NVMe-oF
target should always be supported in the string lookup functions, but
add a fallback anyway to satisfy the static analyzer.
Change-Id: Icadf991d6742a2a759b5793253b71b4eabc763ed
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_app_fini() changed to void, as no operation within it
can fail with meaningful return code.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If77cbf745a8e3fcba4ea24411aa1816f3910cde7
Reviewed-on: https://review.gerrithub.io/381537
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The nvmf library now supports the ability to assign arbitrary NSIDs,
rather than automatically assigning the next one in line. Expose this
functionality to the user via the configuration file and RPC interfaces.
Change-Id: Ia85a9a6dfe31a2cd0605c7a6c098eec0c1b7de68
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376463
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The previous behavior with an empty host NQN whitelist was to allow any
host to connect.
Change-Id: I5401e52d96642cf20afe0d50c692613e67262edf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376432
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The requests are now sent using spdk_thread_send_msg
internally, so the user no longer needs to supply
these callbacks.
Change-Id: I84b0f5f0f1f6fa6eaf9a717934925d3ad802fcfd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376240
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Everywhere this is used, we can just use
spdk_nvme_transport_id instead.
Change-Id: I407c812cd6a1ca3afcb3d1fe87c7e22183b09d7a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375461
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows the user to configure an arbitrarily large number of
namespaces instead of the current hard-coded limit of 16.
Change-Id: I3a29b0de10eafd682b12c54e12411d1f9d41ce85
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375636
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The configuration file parser now uses its own (arbitrary) limit on the
number of namespaces; this removes the need for MAX_VIRTUAL_NAMESPACE to
be in the public API.
The new MAX_NAMESPACES limit in conf.c is larger than the current
MAX_VIRTUAL_NAMESPACE; any namespaces beyond the current limit will
fail. Later patches will allow dynamically increasing the number of
namespaces in a subsystem.
Change-Id: Ice508ac0fee34622cd738b8f477f2dc20870d5f0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375635
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function accepts new connections, so use the more
traditional name.
Change-Id: Ie4aaa4b1d6da81f81fa3cd1505e5ac45e157f052
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375205
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, move the implementation into the appropriate
compilation unit.
Change-Id: Ie1c56bc5e077b81d744414716f9267ceaf591e49
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375034
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The user can now specify which target they want to
search for the subsystem. Also, change the name to
spdk_nvmf_tgt_find_subsystem and put it in the correct
compilation unit.
Change-Id: I7c085959814c14d8400a0ba2572103b0814a4d0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374879
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The user can now specify which target to create the subsystem
on.
Change-Id: I6206c0d762d59ff6312cb58d36180281baaa7266
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This new function returns a reference to the target
object. This sets the library up to support multiple
targets in the future.
Change-Id: Id803dbcbb166eca33d8d5c381d9db97628606f3e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374877
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The list of options is going to continue to grow, so avoid
constant API churn by adding an options struct.
Change-Id: Ie9e7248281726d4aee42b3519fcf7535ba01ee34
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Hide the implementation of spdk_nvmf_listener.
Change-Id: I62d46c76be0962b4246d1b7774ce8249b5baa039
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Hide the definition of spdk_nvmf_host. Add accessors
for the necessary data.
Change-Id: I28f5b8d243cb1b299724a1dd32fcf2f2bd95e1f9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new struct spdk_nvmf_ns to hold namespace information, and add
accessor functions so that it can be moved out of the public API in
future patches.
Change-Id: Id926aaa3cc279649057afc65e08024628edbc435
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374740
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The strcasecmp() comparison was incorrect, causing "Mode Virtual" to
take the opposite of the intended path.
Change-Id: Ic83f451dee2c7a786a1a9b88cf426fcd5abf3037
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373392
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I08283835594435ff05955d9d90bfd0817875171f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373407
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I29a46cbaef20e15173781680a62bc8087ca5672f
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/372426
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Create one transport per nvmf target. Today, there is just
one global nvmf target, but this paves the way for multiple.
Change-Id: Iaa1f8c5e7b3c1e87621ef2a636c68c2dd8fd929e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371748
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Match the terminology used in the NVMe-oF specification,
which is queue pair. For the RDMA transport, this maps to
an RDMA queue pair, but may map to other things for other
transports. It still is logically a "connection" from
a networking sense.
Change-Id: Ic43a5398e63ac85c93a8e0417e4b0d2905bf2dfc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is just a rename - the functionality hasn't changed.
Use the same terminology as the specification (which is controller)
so those familiar with the specification can more easily
approach the code base.
This is still conceptually equivalent to a "session" in the
networking sense.
Change-Id: I388b56df62d19560224c4adc2a03c71eae6fed0d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe-oF target was written before we defined
spdk_nvme_transport_id. Now that we have it, go back
and replace all of the locations where we individually
tracked traddr, trsvcid, trtype, etc. and use a trid.
Change-Id: I84334a12c7581f414c1e84680f122fe885a3b9dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370744
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ie05f58e677107072fea6cc7702bab47a077cb595
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370743
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There is now only virtual mode. Virtual mode has been
improved enough to reach feature parity with direct
mode and performance benchmarks show no degradation.
Simplify the code by always using virtual mode.
Change-Id: Id5cdb5d4d8c54e661b245ed7250c2f9d66ca2152
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/369496
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ic4221e044eb5af92aa06e468eb989bee285022af
Signed-off-by: Jan Kryl <jan.kryl@nexenta.com>
Reviewed-on: https://review.gerrithub.io/371303
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Usage:
./vhost -f path/to/pidfile
A text file containing single pid number will be created
Change-Id: Ia7762ce3085400a47740c9a5f44b56d63c9fafc6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/368518
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The default print level used by the apps is SPDK_LOG_NOTICE, which will
prevent the tracelogs from being shown.
Change-Id: I5f136e8aa0be0aa7634c7dd72231f2c23b129e51
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368803
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will enable asynchronous request handling in a future patch, and it
also removes the need for the RPC handlers to know about request id and
the JSON-RPC rules about notification-only requests.
Change-Id: I25aaa8e48bff8d5594ffcccecb61842b1e31ec3c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Always use "Local7" internally. We want the log API
to be generic instead of syslog specific.
Change-Id: I021f719e90c236f123fa1cadebc0c199b87ba077
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365295
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows the user to optionally specify the address family for
construct_nvmf_subsystem (default is IPv4).
Note that the RDMA transport still only supports IPv4 because of the way
it binds to the listen address; this will be fixed in a separate patch.
Change-Id: I534ed75f6f81e53559d1bebcd2f34f1a2b210a97
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367429
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use "trtype" to represent transport types in nvmf_tgt RPCs for
consistency with the NVMe-oF spec and other SPDK RPCs.
The current "transport" names are still supported for compatibility with
existing RPC users.
Change-Id: Ib03dda384dc01a41a18c06c56baff16b82d36c00
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9c1865ff1ca2d8093227c89aa9857ff18d3e346a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365294
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove dpdk_ prefix in spdk_app_opts and spdk_env_opts
Change-Id: I6f231f67072b808e84945d41b1fe31a180beb350
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/365787
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This separates the vhost library from the event
framework's subsystem mechanism
Change-Id: I8206fcf0d55bee71c70482d989318e9d118f710a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365286
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This separates the iscsi library from the event
framework's subsystem mechanism.
Change-Id: I880ee4749ab0a411ca8dfd04f669868cba5c8b49
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365285
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This separates the scsi library from the event framework's
subsystem mechanism.
Change-Id: Iac2bbdb861e28ee9af0f13bc7187ac24279d0f5b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365284
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This separates the RPC library from the event framework.
Change-Id: I26a9cb318b56d44ec9337f8a4db98967eb87ad95
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365283
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This breaks the strict dependency on the
SPDK event framework.
Change-Id: Id93d79bfbc482350dc9802fa84a554f7e11f3826
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365282
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This removes the strict dependency on the SPDK
event framework.
Change-Id: Ie6b6f9585d09ab1df0f25bf33d53e7cdecd83faa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365281
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Much like bdev modules inside the bdev directory,
add a subsystems directory inside of event. The subsystem
specific code for the bdev library is placed in to
a separate library in that directory, breaking the
strict dependency of the bdev library on the event subsystem
code.
Change-Id: I255941b823a9ec3e2d62f22a586414949d8ff5ad
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365055
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that virtual mode namespaces can be chosen arbitrarily, there can be
holes in the ns_list. Make sure all of the virtual mode code paths are
prepared to handle these inactive but valid NSIDs.
Change-Id: I0d70fd9dae37a29a8358e1d38dcc6cac3237fd9a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365717
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In this patch, spdk_app_init will be merged into
spdk_app_start.
Due to this change, we need to change event_perf
to use spdk_app_start, since we cannot use spdk_app_init
anymore. So the related changes for event_perf is to
make it work with reactor framework.
Change-Id: Id67edf209fd628cca361a499068c93aeedfe6167
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/364153
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK's use of getopt() needs special handling of the optind global
variable since we are passing it a separate array of arguments (not the
typical argv and argc). Set optind to 1 internally to env_dpdk so that
the apps don't need to know about it, and restore optind in case the
calling app is also using getopt().
Change-Id: Icbf07002c99fa9f94c866e8eff707124b0ef679b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365062
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I272c2e56984abbb820758866297ee9e916af625a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/363605
Reviewed-by: John Meneghini <johnm@netapp.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <ed.rodriguez@netapp.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I533a004e1c28247a19a893f970e273e3219ad702
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/363604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Meneghini <johnm@netapp.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
MAX_VIRTUAL_NAMESPACE will be removed from the public API, so use an
RPC-specific array size to remove its use in nvmf_tgt.
Also increase the number of namespaces accepted by the RPC call; this
does not actually allow more than MAX_VIRTUAL_NAMESPACE right now, since
the namespaces are still stored in a fixed-size array inside the
subsystem, but at least the RPC side is not limited by that size now.
In the future, we will make the subsystem namespace list dynamically
sized.
Change-Id: I99c77ddeae4c13ddde34e2b945c663dbafdb68d9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363310
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I61b6579e8698d16e5a8ab74d304af9ea53f9dce4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363307
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvmf_subsystem_add_ns() already checks to see if there is space for
the new namespace.
Change-Id: I9c66311a4f1eb289e87089ab7fa04e8c05b68631
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363305
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also move the validation of serial number length into the library.
Change-Id: Ibc9384fc1fccb87bd15b75da7f3942570900bd96
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363304
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Icecbc0c8f43ad894e43e6cd1e818978615b56fd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363302
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvmf_subsystem_exists(nqn) is exactly equivalent to
spdk_nvmf_find_subsystem(nqn) != NULL.
Change-Id: Icafa43166c99d1364b49cef30a5ade4b6625bcd5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363299
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch do the following optimization:
1 when the nvmf target run as secondary process, the nvme probe will
not call the probe callback function, which will skip the step to
set up the ctx->found, so we set up it when we call attach callback.
2 when the nvmf target run as secondary process, every time when we try
to probe one device, it will iterate all the attached devices and call
the attach callback, for nvmf target, it will cause the overwrite of
the nvme controller for the nvmf subsystem, so we need to compare the
attached deivce with the device which we try to attach, if they are not
the same one, just return.
Change-Id: I606ba75b1dab7fd1b1e4e1cfcf63248a506725d1
Signed-off-by: cunyinch <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/362807
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This used to be only for RPC, but now it is used in both
the config file and RPC paths.
Change-Id: I138a23f87e9042be60460bc5451470a2443ac3c3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Added a new function spdk_nvmf_tgt_start() that initializes and
starts the nvmf app. The main function now only parses the command
line args and calls into spdk_nvmf_tgt_start().
Change-Id: I886a4021762a11c3c1f6ebfff5ed72adc409a34e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvmf_tgt_listen() can fail due to invalid user input (e.g. from a
config file), so we can't just assert() that it worked.
Change-Id: Iea2d4ab2c82d79f6eada24e6082456489bf304b8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
A few instances of DPDK_INC were added after the env library abstraction
was introduced; replace them with the correct ENV_CFLAGS variable
defined by env.mk.
Change-Id: I54ab2b2360a72506049fee549491f6614601a148
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
it will free invalid address when we start nvmf using profile,
this patch fix the bug.
Change-Id: I5100eadc2fd129a5b9e3588decac1429d03d78a4
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
SPDK_COUNTOF works like sizeof, except it returns the number of elements
in an array instead of the number of bytes.
Change-Id: I38ff4dd3485ed9b630cc5660ff84851d0031911f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds a library, application and test scripts for extending
SPDK to present virtio-scsi controllers to QEMU-based VMs and
process I/O submitted to devices attached to those controllers.
This functionality is dependent on QEMU patches to enable
vhost-scsi in userspace - those patches are currently working their
way through the QEMU mailing list, but temporary patches to enable
this functionality in QEMU will be made available shortly through the
SPDK github repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Krzysztof Jakimiak <krzysztof.jakimiak@intel.com>
Signed-off-by: Michal Kosciowski <michal.kosciowski@intel.com>
Signed-off-by: Karol Latecki <karolx.latecki@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Krzysztof Jakimiak <krzysztof.jakimiak@intel.com>
Change-Id: I138e4021f0ac4b1cd9a6e4041783cdf06e6f0efb
It is caused by this commit:
4163626c5c
nvmf_tgt_delete_subsystem registers the poller
with function subsystem_delete_event.
subsystem_delete_event is called asynchronously,
the deletion should happen in this function.
Otherwise, with the current code,
g_subsystems_shutdown = true
TAILQ_EMPTY(&g_subsystems) = true
when subsystem_delete_event is firstly called.
If there are multiple subsystems, the logic is wrong.
Thus other subsystem will never be delete. since
we already execute shutdown_complete().
Also add related test scripts.
Change-Id: I3823563fc9e8611c11a6d798685ff64e2939842e
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
subsystem_delete_event():
Delete TAILQ_REMOVE because nvmf_tgt_shutdown_subsystem_by_nqn has
already called TAILQ_REMOVE.
shutdown_subsystems():
Add TAILQ_REMOVE according to the above change.
nvmf_tgt_delete_subsystems():
Add TAILQ_REMOVE.
By default, all SPDK applications will not share memory.
To share memory, start the applications with the same
shared memory id.
Change-Id: Ib6180369ef0ed12d05983a21d7943e467402b21a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the construct_nvmf_subsystem RPC call handler code from the
nvmf.conf parser to factor out some of the duplicated code.
Change-Id: I1b8f9af03f4a774cbb5c06dda7c57286e8968204
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the same check as the subsystem configuration file parsing uses.
Change-Id: Id301a929e06f51b060256a3038e0c24120ccd308
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The host and port output parameters point into the (non-const) char *ip,
so it makes more sense for them to be non-const as well.
This allows the flexibility to pass non-const char pointers as the
output parameters, which will be used in the nvmf_tgt/conf.c parsing
code.
Change-Id: I1d5b102fc389c06d36432904e4fda944437b659e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These were repeated a few different places, so pull them into a common
header file.
Change-Id: Id807fa2cfec0de2e0363aeb081510fb801781985
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The phenoemon is that we can not shutdown the nvmf tgt.
The solution is that we need to adjust the shutting down orders of
nvmf tgt subsystem and rdma trasport layer.
Change-Id: Ie39657370b1574960e0ee7cf604cc5872db0bed3
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Make sure iscsi_tgt gets rebuilt when a blockdev or copy module is
modified.
Change-Id: Ia10cfbb4b71b686e9a97c68be1d50ae1eebac21f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These strings are not modified by the functions they are passed to, so
they can be const char *.
Change-Id: I11532f232990a305d706c14aac1b0f8f93b8f576
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When we do frequent same subsystem add/delete,
we will face the adding issue. For example,
1 Add subsystem A
2 Delete subsystem A
3 Add subsystem A (Fail in this step).
The reason is that we did not correctly free
the listener resources of subsystems, and this patch
can solve this issue.
Change-Id: I6765a306a3f10c9a0f38c95dbba12e2a4073e705
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The 'next' event pointer was never used in the entire code base (always
NULL).
Change-Id: I75f999d3a2e10512d86edec1a5a46ef263e2635b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use 'struct spdk_event *' directly for consistency with the rest of the
API.
Change-Id: Ib41a9bf47f5b18f4aebf5f4dee055455cb12ef7d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the elimination of the spdk_event_get_arg1() and
spdk_event_get_arg2() macros, which accessed the event structure
directly; this was preventing the event structure definition from being
moved out of the public API header.
Change-Id: I74eced799ad7df61ff0b1390c63fb533e3fae8eb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The public API user is supposed to retrieve the defaults via the
spdk_app_opts_init() function.
Change-Id: Ie2bd6e809b2d47dbd5d62d396e8715f89f4052d9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The spdk_poller_register() function provides a way to pass an event to
call once the poller is registered, but it is always NULL in the current
code base.
Change-Id: I459bf40ae4d050589577d113b7984f1563aaa9cc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
They were very close to the same already, so finish the job.
Change-Id: Ifba9e3b2d11a3e70cbfbe46f57a67552db2757ed
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The probe_info was reduced to just containing a
transport_id, so remove probe_info entirely.
Change-Id: Ica9a22d126cd14e282decd3eea1a0afe0460f099
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It is not necessary, and it prevents the linker from removing unused
object files.
Fix the iscsi_tgt Makefile's library order so that env is added at the
end after the libraries that use it.
Change-Id: I241eb46703c12691444037a350be65143259e82e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added the socket ID to the NVMe over fabrics target warning messages.
This will help during troubleshooting to check that the NVMe device, Subsystem and NIC are on the same NUMA node
Change-Id: Id750a5a7694c898bb61ea26089ea3098611d530a
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
If AcceptorPollRate is configured in configuration
file, the default value used will be given by
ACCEPT_TIMEOUT_US. So change the default value, it
can solve the performance degradation issue of
nvmf target.
Change-Id: I867bb03dd8b2b81b86911130babd0334d9857de8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Make it easier to use SPDK libraries by putting them all in a single
directory that can be added with -L rather than scattered around the
source tree.
Change-Id: I5c0f5dd6e7058b5f92fa9bc41548190ffc064761
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove usage of the conf structs so they can be moved out of the public
API header.
Change-Id: I1c7375ec7708b323f50af09aeb7b2b2c9c770df4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The details of the structure were removed earlier, but
now remove all references even to a pointer to the
structure. The user can refer to transports by their
string name.
Change-Id: I273356f46329ea5372dcd951eda6f14767477d69
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a step toward abstracting away the definition
of the subsystem.
Change-Id: I88b2aa107b27152620f51a1ca2a153792b4c85e9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvme_probe() will now provide a struct spdk_nvme_probe_info to the
probe and attach callbacks in place of the PCI device pointer.
This struct contains the useful information that could be retrieved from
the PCI device during probe.
The goal of this change is to allow expansion of the probe information
in the future when other transports (specifically, NVMe over Fabrics)
are added that do not necessarily use PCI addressing or device IDs.
Change-Id: I59a2a9e874e248ce5fa1d7f4b57c8056962ff3cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a helper function that converts a PCI address from a string into a
struct spdk_pci_addr and use it in place of the various sscanf()
invocations throughout SPDK.
Change-Id: Id2749723f76db741567e01b4bcb0fffb0e425fcd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add an RPC interface to list all blockdevs and their properties.
Change-Id: I50db730d5eff8cffcbe8fe5df6b3461457e8581e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some of the SPDK libraries only expose constructor functions, so they
would normally be eliminted by the linker. Add a new list in the
Makefile of libraries that must be linked with --whole-archive (while
still being added to the dependency list for the app).
Change-Id: I7e41a807c945468730fa84f1bdee23dfd6b59358
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe over Fabrics target was storing the PCI device pointer for each
direct-mode controller, but it only really needs the PCI address, which
is exposed via the get_nvmf_subsystems RPC.
Also update the same code path to use the new spdk_pci_device_get_addr()
function for brevity.
Change-Id: I0708b3331b7c279c1a86f0d7459b5deb40dd7c89
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the entire transport structure definition
to become private.
Change-Id: I9ca19edbfc3cfb75b9b113a89bb2b90bc499ab16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This changes as little code as possible while still creating
a single public API header. This enables future clean up
of the public API and clarification of the exposed
concepts.
Change-Id: I780e7a5a9afd27acf0276516bd71b896ad301c50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Starting the subsystem consists of firing an event
to the subsystem poller's lcore and performing
I/O channel initialization (for virtual NVMe
subsystems) before starting the poller.
Previously the subsystem would be started immediately
when created, which was before the subsystem's
mode and other parameters (such as a virtual subsystem's
bdevs) have been set. This resulted in no I/O channels
being allocated in virtual subsystem mode.
So break out the start code into a new
nvmf_tgt_start_subsystem() function, which clients
must call after fully initializing a subsystem created
with nvmf_tgt_create_subsystem().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56534668887ef99d2e892844acd12194920c3245
Extend the check added in commit
7552ee5512 ("nvmf_tgt: fail if NVMe
controller is not found") to the RPC interface.
Also remove the default PCI address from rpc.py, since it is not a
useful default - the user must specify a PCI address, which will vary
depending on the configuration of the machine.
Change-Id: If9a4e19ef2a84c9d839b467abc011046613f7168
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of a magical "All" value for allowing all hosts, allow the
caller of construct_nvmf_subsystem to omit the "hosts" parameter.
Change-Id: I97c7ae806a0be7142fb59708d47023e42e127fcc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
create_nvmf_subsystem should not allow the user to specify any
namespaces in direct mode.
Also remove the default Malloc0 namespace in rpc.py; the user
should be required to specify the list in virtual mode.
Change-Id: I3aaf7c64b9ceee89a3f7db15760a669527adb29d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change the output of get_nvmf_subsystems to be consistent with
construct_nvmf_subsystem.
Change-Id: I6987f6cbd916a870e9b15f0faa3cce2ed6d49795
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The get_nvmf_subsystems RPC reported the PCI address of direct-mode
NVMe devices as individual integers, but the construct_nvmf_subsystem
call requires pci_address in a string format (%x:%x:%x.%x).
Change get_nvmf_subsystems to format the PCI address in the same way
that construct_nvmf_subsystem takes as a parameter for consistency.
Change-Id: I6e55e9a9e73dd425fd560d609b86a2f839c53c61
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove #includes for all DPDK headers that weren't
necessary.
Change-Id: Ib02522e0f04e64a1c98afceb7508cc0e8d931a9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was only used for debugging. Everywhere else
used the spdk_memzone abstraction.
Change-Id: I8a828ea3c7abccb66c8a027cb13de43c560ff7a1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This converts some, but not all, usage of rte_mempool
to spdk_mempool. The remaining rte_mempools use features
we elected not to expose through spdk_mempool such as
constructors, so that will need to be revisited.
Change-Id: I6528809a864ab466b8d19431789bf0f976b648b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the env library to perform all memory allocations
that previously called DPDK directly.
Change-Id: I6d33e85bde99796e0c85277d6d4880521c34f10d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
'virtual' is a keyword in C++, so avoid using it in variable
and structure names in case any files are eventually
included from a C++ project.
Change-Id: I2122750445def63038af68a3000758e33b937f9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These 4 callbacks can be condensed into two callbacks, which
simplifies the API.
Change-Id: I069da00de34b252753cdc8961439e13a75d1cc68
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows users to swap their PCI library from
libpciaccess/dpdk to another mechanism using the standard
method for swapping out the env library.
Change-Id: Ib2248f8b43754a540de2ec01897e571f0302b667
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows users to swap out SPDK's third party
libraries for an implementation based on their own
framework.
Change-Id: Ia0b7384ce5e31acba5ad0d7002dec9e95b759c52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The new env library will wrap all third-party library
calls and be easily swappable with alternate implementations
at build time. For now, it's just the memory library
renamed.
Change-Id: I26a70933289f8137107208ba75f7520fd7a33da0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch also drops support for automatically unbinding
devices from the kernel - run scripts/setup.sh first.
Our generic pci interface is now hidden behind include/spdk/pci.h
and implemented in lib/util/pci.c. We no longer wrap the calls
in nvme_impl.h or ioat_impl.h. The implementation now only uses
DPDK and the libpciaccess dependency has been removed. If using
a version of DPDK earlier than 16.07, enumerating devices
by class code isn't available and only Intel SSDs will be
discovered. DPDK 16.07 adds enumeration by class code and all
NVMe devices will be correctly discovered.
Change-Id: I0e8bac36b5ca57df604a2b310c47342c67dc9f3c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For NUMA architecture, you may get performance drop if your NVMe
devices and transport devices located in different socket, with
this patch, the NVMf target will print a warning message to remind
the user that your configuration is not optimal.
Change-Id: Ia6013ef95984f0ce8c7f1ca86b89c0375686a188
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
I/O channels are not actually used for I/O yet however.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa3774ecacc7ec206c7c0c66e6b2f2d10c8fa785
1 In our nvmf tgt implemention, we use the async
mode to delete the nvmf subsystem. However, when
we parse nvmf subsystem, we need to use the sync
function to delete the nvmf subsystem. Since if
there is error, we will call spdk_app_stop, thus
async functions will not be executed. It is
approved in my local test.
2 Add debug info in spdk_nvmf_delete_subsystem
Change-Id: Ia8ecd6eee1bbd25cb3e1ceeb0e2146f3f03be228
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
For subsystems in Direct mode, make sure the NVMe controller specified
is actually located during the probe call.
Change-Id: I7d5212ea628eadba3e720172a5ead8902eaaf6d0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Rename this function and make it more meaninful, since
we have spdk_nvmf_session_connect which is used to link a
connection to the session
2 split spdk_nvmf_session_destruct.
Change-Id: I150df7ccdf4de3428d8cecbb286d5f7944510a8c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The application is now entirely responsible for scheduling subsystem
pollers and sending events between threads.
Change-Id: I88da1f53b5e8852c7c4acd6f0a7a1e2219fbed41
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reason: In acceptor_poller_unregistered_event, we
directly call spdk_nvmf_check_pools and spdk_app_stop,
it will fail the memory check.
And function nvmf_delete_subsystem_poller_unreg will
not be called since we already call spdk_app_stop.
Change-Id: I3ffa30c87b149a66cee1d87d1bb81d4dc8cc96b9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Need to check bdev != NULL, otherwise there will be a segment
fault later
Change-Id: I8aa74e7716decc3166f9f2abbbb0c8ff73816f84
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Match the direct NVMe device backend by printing out each block device
that is added as a namespace to a virtual subsystem.
Change-Id: I5c2762ca1fbab3529c19c822c95c73b72e9dabbc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the NQN validation into the subsytem creation function, and fix the
allowed size to match the spec.
The spec is not clear about the allowed NQN size; for now, interpret it
as 223 bytes, including the null terminator (222 bytes of actual NQN
plus one terminator byte).
Change-Id: If9743ab2fe009d9d852e8b03317d9b38d8af18dc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This header will be used as the general NVMe over Fabrics target app
include file.
Change-Id: Ia26ff6d97fb3fd3f2c55b43c15abbb0e58998e30
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Build the now-generic nvmf_tgt app regardless of whether the RDMA
libraries are available.
The nvmf_tgt app Makefile still has to add the RDMA libraries to the
linker command, but otherwise it does not need to know anything about
the avilable transports.
Change-Id: Ibeeac5ed998be1eb12a673a1340893dbb53110b7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows live configuration of the target, much like
the iSCSI target. More function calls will be added
over time.
Also, make the tests wait until the target is listening
on the RPC port to determine that the target is ready.
Change-Id: I8f762e49511d482ef820f6b25a7d3ad9a8bb41f9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the event framework's new delay parameter to allow
for idle cores to sleep for up to 1ms at a time.
Change-Id: I665f38e590c07338418892afe0e75b0b2c79706e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The NVMe over Fabrics target library now exposes a simple function call
that polls the acceptor once, and the application handles registration
of the poller.
Also rename the transport function pointers related to the acceptor so
they better reflect their purpose.
Change-Id: I5fa0d516586bf17e73afeb88ff3c2d5b0d46794d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Similar to our NVMf target, this is an iSCSI target that
can interoperate with the Linux and Windows standard iSCSI
initiators.
Change-Id: I6961c5ef99f7b161c396330ed5b543ea29b0ca7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Move the ctrlr and io_qpair out of spdk_nvmf_subsystem, package them
as a new data structure. Union the direct and virtual mode namespaces.
Change-Id: I839aee3372c6c57aa03a0be76f8aaeb5045ecdaf
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Make sure the trace history that is exported via shared memory is always
the same size, regardless of DPDK configuration.
Also removes the necessity of including DPDK headers from spdk/trace.h
(so we have to fix up other files to include what they use).
Change-Id: I32f88921fd95c64a9d1f4ba768ae75e2ca5d91da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These can be simplified and merged into the subsystem.
Remove the concept of mappings from subsystems and replace
it with a list of hosts and ports. The host is optional -
not specifying a host means any host can connect.
Change-Id: Ib3786acb40a34b7e10935af55f4b6756d40cc906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Make the core NVMf to transport interface generic and allow for multiple
transport types to be registered.
Change-Id: I0a2767a47d55999c45f788ae1318bb50af60ab4e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMf target is being refactored to split the RDMA transport-specific
code into its own file. Once this is complete, we should be able to
plug in other transports and build the NVMf target without any RDMA
dependency if desired.
To enable this, change the CONFIG option to RDMA; it still controls
whether the whole NVMf target is built for now, but once the RDMA
dependency is actually made optional, we will be able to build the
generic NVMf target code without libibverbs installed.
Change-Id: I8cd90a9aaa85dcefcc9b0f8f2e7b6af21958b2a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The whole cleanup process is now started by
spdk_shutdown_nvmf_subsystems(). Each subsystem will clean up its
session, if any, and each session will clean up its connections.
Change-Id: I9915d4547751ed4ffc4baa2c45c628698dd0b881
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure the reactor mask in profile take effect.
Change-Id: Ia471b2b88a711f05738cf93068c4f3a8c9a3039d
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
The function call of spdk_nvmf_check_pools can be
directly put in nvmf.c.
Reason: This pool is created by nvmf subsystem,
it should be recycled by this subsystem.
Change-Id: I49e49bcb56079fc25d26b1f5078a1808c2f8e189
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Simplify the build rules so that common libraries are always linked.
Also fix up a couple of -lpciaccess instances that should have been
changed to $(PCIACCESS_LIB).
Change-Id: I4c50fa3aa59cae013d3385e38fbb830794299f6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This enables SPDK_NVMF_BUILD_ETC to be moved out of the library as well,
since only authfile was using it before
Change-Id: I10d1145881f9a0358d7effe2d2d9851899413e1b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is only a single global g_nvmf_tgt that can be passed to this
function, so remove the parameter and use the global directly.
Change-Id: Ia1a2a1e6cd3801101ddeb4de5526dd115fa7ef8f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add the '/' prefix to the trace shm name.
Change-Id: I4cf1011b639f299314ea379ba3fb626f5c2c787a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
