These are specific to local NVMe PCIe devices, so move them out of the
generic NVMe code into the PCIe transport.
Change-Id: Iea2056a4c438b7d3a303b4b5e977ce7aa9e58c05
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the entire transport structure definition
to become private.
Change-Id: I9ca19edbfc3cfb75b9b113a89bb2b90bc499ab16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This changes as little code as possible while still creating
a single public API header. This enables future clean up
of the public API and clarification of the exposed
concepts.
Change-Id: I780e7a5a9afd27acf0276516bd71b896ad301c50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
When /usr/include/rbd and /usr/include/rados
are detected, enable rbd compilation in autotest.
Change-Id: Ibcd8d444b83402af1996b1e382be204a87dbc6e9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Only call spdk_bdev_io_complete() where IO error is seen.
Change-Id: I829e4c589dbcb47017e810035837a4c61c3428f9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This will allow factoring out PCIe-specific code into a swappable
transport so that NVMe over Fabrics host support can be added.
Change-Id: I4df74dd268d655e3b36e8d6114ebe7d79a24844d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For large writes that require multiple SCSI tasks (one for immediate
data, then one or more for R2T-solicited data), we bump the refcount
for the task associated with the initial immediate data PDU, to
ensure it does not get freed until all of the child tasks are
completed. But in some cases this initial immediate data PDU could
complete after all of the R2T-soliciated data PDUs. The
completion code was not handling this case correctly which would
result in the iSCSI connection thinking it still had outstanding
SCSI tasks when the connection closed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f9c5322755462d1918fde0075c87c84295cb10c
Mounting with sync to do more IO during test.
Print dev stats after umounting.
Do not change directory to mounted system, as this is preventing cleanup
trap to umount used path in case of failure.
Change-Id: I2f444b67b1f293c9d7c939f8f94aa5756e20aa26
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Change tests to use read/write vector and non-vector versions.
Change-Id: I5a97568d3dc2f61d44721f4b0c75331baad417bb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: Ie2c1f6853bfd54ebd8039df9a0305854ca3297b9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Make sure the function reentrant, prepare for rpc method.
Change-Id: Ie5230e4ac6c9a750e8e779c5e0b67134729c07e3
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This prepares for future scatter-gather support.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie21c4d86c1e932dcaf63cf13d7a7198890595d79
Return void in main I/O path, and have functions
explicitly complete the I/O back to the bdev layer
if any failures are encountered.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia729b0af555f87c2fb36b92e79a47d19a325de7a
Add public function which could be used by rpc method.
Change-Id: Id9d2938801e0acdf0f9827ef2990a54c75aec22a
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Starting the subsystem consists of firing an event
to the subsystem poller's lcore and performing
I/O channel initialization (for virtual NVMe
subsystems) before starting the poller.
Previously the subsystem would be started immediately
when created, which was before the subsystem's
mode and other parameters (such as a virtual subsystem's
bdevs) have been set. This resulted in no I/O channels
being allocated in virtual subsystem mode.
So break out the start code into a new
nvmf_tgt_start_subsystem() function, which clients
must call after fully initializing a subsystem created
with nvmf_tgt_create_subsystem().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56534668887ef99d2e892844acd12194920c3245
This patch removes the lock in RBD module. And it requires
the librbd library supports rbd_poll_io_events function.
Change-Id: I040a7d8369ab4f69f41d1d0233115f885168f019
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This patch makes lun_name:lun_id pair as one object,
the same for the pg_tag:ig_tag.
Change-Id: Ib08450d12bde9b8388d4ae41e214cc0ba64c8b1e
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Extend the check added in commit
7552ee5512 ("nvmf_tgt: fail if NVMe
controller is not found") to the RPC interface.
Also remove the default PCI address from rpc.py, since it is not a
useful default - the user must specify a PCI address, which will vary
depending on the configuration of the machine.
Change-Id: If9a4e19ef2a84c9d839b467abc011046613f7168
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of a magical "All" value for allowing all hosts, allow the
caller of construct_nvmf_subsystem to omit the "hosts" parameter.
Change-Id: I97c7ae806a0be7142fb59708d47023e42e127fcc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
create_nvmf_subsystem should not allow the user to specify any
namespaces in direct mode.
Also remove the default Malloc0 namespace in rpc.py; the user
should be required to specify the list in virtual mode.
Change-Id: I3aaf7c64b9ceee89a3f7db15760a669527adb29d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change the output of get_nvmf_subsystems to be consistent with
construct_nvmf_subsystem.
Change-Id: I6987f6cbd916a870e9b15f0faa3cce2ed6d49795
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The get_nvmf_subsystems RPC reported the PCI address of direct-mode
NVMe devices as individual integers, but the construct_nvmf_subsystem
call requires pci_address in a string format (%x:%x:%x.%x).
Change get_nvmf_subsystems to format the PCI address in the same way
that construct_nvmf_subsystem takes as a parameter for consistency.
Change-Id: I6e55e9a9e73dd425fd560d609b86a2f839c53c61
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For the nvme readv/writev APIs, the PRP checking logic was
incorrectly failing single SGE payloads that were larger
than 4KB. This patch adds a test case for this scenario,
and fixes the PRP checking logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6357d620599666046d2cb74d7923dac1f75418c5
This test will create a malloc and NVMe iSCSI target node,
perform an iSCSI login, create and mount a filesystem, then
copy the SPDK contents to the mount and do a build.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I00291e6ca768dd4b685086cf1479098558b9329f
Explicitly include the pthread header after removing some headers that
implicitly included it.
Change-Id: I39fe272acfcc63d3888d2430137de2c3426f1af6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use standard GCC style atomic operations instead of
the DPDK calls. The DPDK calls end up translating
to the gcc standard inline calls in the generic
case anyway.
Change-Id: I0ea760c4e23c3660b082a803bbc174de7250f365
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
