Scan-build has a real issue with reallocs. The original
error from latest version of scan-build is rather complicated,
but it can be greatly simplified with the following change:
> diff --git a/lib/blob/blobstore.c b/lib/blob/blobstore.c
> index 7580c9dd2..6a594edf3 100644
> --- a/lib/blob/blobstore.c
> +++ b/lib/blob/blobstore.c
> @@ -1147,8 +1147,9 @@
> _spdk_blob_persist_clear_clusters_cpl(spdk_bs_sequence_t *seq, void *cb_arg, int
> } else if (blob->active.num_clusters != blob->active.cluster_array_size) {
> tmp = realloc(blob->active.clusters, sizeof(uint64_t) * blob->active.num_clusters);
> assert(tmp != NULL);
> - blob->active.clusters = tmp;
> - blob->active.cluster_array_size = blob->active.num_clusters;
> + ctx->blob->active.clusters = tmp;
> + assert(ctx->blob->active.clusters[0] != 14213);
> + ctx->blob->active.cluster_array_size = ctx->blob->active.num_clusters;
> }
>
> _spdk_blob_persist_complete(seq, ctx, bserrno);
> ```
Scan-build will then complain:
blobstore.c:1151:10: warning: Use of memory after it is freed
assert(ctx->blob->active.clusters[0] != 14213);
Asserting blob == ctx->blob, blob->active.clusters == ctx->...,
or even tmp != blob->active.clusters doesn't work, so use the
last resort scan-build weapon - #ifdef __clang_analyzer__.
The realloc in this case is just down-sizing a buffer to
save some memory. For scan-build, just don't do it. This
finally silences all scan-build false positives.
Change-Id: Ib88ea145370f5035eedd2412e98ee61f96ad1915
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462868
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
md_start and md_len are values in pages rather than lba.
Those should not be compared against lba of currently
loaded md page.
This patch changes assert to verify if the lba of current
page does not exceed max lba where md is expected to be.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id445eb9871f82f7fe367bfc396f1b495591511c1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Blob id only is matched to the very first page of md for
that particular blob.
During loading blobstore, we shouldn't verify
further pages in chain against the blobid.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc7863ddcb403aedc264c14e6b4c3915bd30dc41
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460607
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Length of xattr descriptor is equal to length of xattr struct,
xattr name and the len of stored value.
There is no limit to how much can be stored in memory for xattr.
On disk xattr size is limited to single page and within that to
max descriptors that can fit in it.
This size is known at compile time.
Before this patch it was possible to add xattr exceeding
what was possible to be written to disk. This caused issues
when serializing the metadata during spdk_blob_sync_md()
or spdk_blob_close(). Making those fail without specific info
to the user and not actually writting such descriptor.
Since maximum length of xattr descriptor is known at compile time,
this patch compares against this value when setting the xattr.
It will immediately report back to user with error, and will
not store xattr in memory (thus not serialize it).
This patch should not affect any backward compatibility for blobs.
Too large xattrs weren't written to disk before,
API for blobstore stays the same - only reporting ENOMEM
when it should.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6f4af4d079e47f084e20d7a4969d9a78ec1f8610
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Currently we are missing cleanup routine for case when
power failure interrupts creating snapshot. This patch
add such routine.
For the case where we find blob with a parent snapshot ID
matching newly created snapshot we can finish whole process
during recovery by processing forward with setting snpashot
as read only, removing xattr and syncing. We should remove
snapshot only if there is no blob with parent pointing at
snapshot.
Fixes github issue #760
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I2f0e298164e07a2b4dfa5367e8878facef640702
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In _spdk_bs_snapshot_origblob_sync_cpl function on error
path we should not close snapshot as it will be closed during
volume closing when bs_dev is being destroyed.
This issue was found in unit test (see next patch in series).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I51c38d1f1f97b134679251b43109b1265e565a17
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455215
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Starting with this patch it is possible to remove a
snapshot if there is only a one clone created from it.
In such case snapshot can be removed without any data
copying. This is achieved with following steps (case
with only one clone):
1. Open snapshot (Snapshot1) that shall be removed
2. Check if the Snapshot1 has no more than 1 clone (Clone1)
3. Remove Clone1 entry from Snapshot1
4. If the Snapshot1 has a parent snapshot (Snapshot2):
4a. Add Clone1 entry to the Snapshot2 clones list
4b. Remove Snapshot1 entry from Snapshot2 clones list
5. Open Clone1 blob
6. Freeze I/O operations on Clone1
7. Temporarily override md_ro flag for Snapshot1 and Clone1
for MD modification
8. Merge Snapshot1 and Clone1 clusters maps into Clone1
clusters map
9a. If Snapshot2 is present switch parent ID and backing
bs_dev on Clone1
9b. If Snapshot2 is not present set parent ID to
SPDK_BLOBID_INVALID and backing bs_dev to zeroes_dev
10. Sync MD on Clone1
11. Sync MD on Snapshot1
12. Restore MD flags for Clone1 and Snapshot1
13. Unfreeze I/O on Clone1
14. Close Clone1 blob
15. Remove Snapshot1
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I800724b981af894e01e1912d0077c5b34a2ae634
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Actually write/writev/write_zeroes/unmap are never be called, and we add
the error code here to keep it same style with snapshot bs_bdev.
Change-Id: I32ad051c1902bd7080b894e36f7c89f1c8d27434
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In some cases user may want to flag blob for removal
then do some operations (before removing it) and while
it happens there might be power failure. In such cases
we should remove this blob on next blobstore load.
Example of such usage is delete snapshot functionality
that will be introduced in upcoming patch.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I85f396b73762d2665ba8aec62528bb224acace74
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453835
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch moves _spdk_blob_set_thin_provision function
higher in the file as it will be later used during
blobstore load.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ife37ef8c69b88903646b2002b3561101c1eb5135
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455488
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Access to field 'tqh_first' results in a dereference of a null pointer
set = TAILQ_FIRST(&channel->reqs).
Add asserts to check if channel got NULL;
Change-Id: Ifd8d131a2432328d683e7fb9357fdd23b2396cf2
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When new writes come from different threads, cluster allocations can
happen many times at once. The corresponding cluster number for the map
is determined via _spdk_bs_allocate_cluster() and kept in ctx->new_cluster.
The cluster itself is inserted into the map only on md_thread.
When there is conflict of two threads allocating same cluster,
message is returned to the losting thread to release the cluster.
Before this patch, on such failure the cluster to release
was calcualted from the page. This resulted in releasing the
cluster claim for thread that actually won it.
This patch makes it so that cluster allocated and save in ctx
is used instead.
Change-Id: Id10811b887f673f9b89e41e0637d4422f1d7270d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3858c637d421b58e74fa5573d257e59fed92824a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452268
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch add new _spdk_bs_delete_blob_finish function
which will be helpful in future changes.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I2d492b6102f33ad35b7b6fe408f709f54b7b2341
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452251
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds new function which is used to check
if blob can be removed when requested.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iafa82fba9bf67ffd15cf639f4665087f054b6b7d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452242
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch creates new function that will be helpful
with further implementation of 'delete snapshot'
feature.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I66f138ba217fb4a4186f2703900a2952cdb8e438
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452240
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
At some point this parameter may have been a bool, but it's
not now - so we need to explicitly pass SPDK_BLOB_READV or
SPDK_BLOB_WRITEV.
Otherwise we end up trying to write the iovec array as the
data buffer when executing this operation later - since we
passed "false" which is treated as 0 which is
SPDK_BLOB_WRITE (not SPDK_BLOB_WRITEV).
Fixes issue #603.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50df736216c4a88b40604722c021e204c7fac623
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452157
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Other threads are referring to this memory.
Change-Id: I9689a1b64a1f032ad479ec85095d2575dcab3a7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452130
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
_spdk_bs_blob_list_remove function returns only 0
so it can be changed to void function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1827d783a7cd18caf831275554e33f398b0b962f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451783
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Block operation that should not be done simultaneously.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3cab510377a49be4e5847ba37a6218f0025c0db6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450014
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently someone can create clone while blob is being
opened for deletion. This patch moves check for blob if
it is a snpashot after the blob is opened.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia4b8b7cb956522a29784aa349d677eb87886e4db
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451682
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously, when creating a snapshot in blobstore the snapshot's cluster map
was copied from the "original" blob, with the original's map zeroed. These
operations are both O(num_clusters*cluster_size/page_size) while io
operations are frozen. This change replaces the linear operation with an
O(1) pointer swap at the critical moment that io is frozen, while
doing the zeroing before the freeze when preparing the snapshot to
minimize freeze time.
Change-Id: I1e468bc97623f5da161a8ddba1393c271acd3aed
Signed-off-by: Amir More <habeanf@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451486
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a part of future changes to block blob operations
that may cause race conditions between each other.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia728d1fc207375ddcb3b70b5081ddcffa9f99027
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I0da485ec68329ee9f819cf6dfdb8744c5993e6f2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Default 'unmap' option stays as it was.
'Write_zeroes' comes useful when one wants to make sure
that data presented from lvol bdevs on initial creation presents 0's.
'None' will be used for performance tests,
when whole device is preconditioned before creating lvol store.
Instead of performing preconditioning on each lvol bdev after its creation.
Change-Id: Ic5a5985e42a84f038a882bbe6f881624ae96242c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When an operation fails, we shouldn't pass a handle or
a 'valid' blob ID to the caller's completion function.
The caller *should* ignore it when bserrno != 0, but
it's best to not take that chance.
Fixes#685.
Note: #685 seems to have a broader issue related to
a possibly locked NVMe SSD in the submitter's system.
This only fixes the assert() that was hit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3fb3368ccfe0580f0c505285d4b1e9aca797b6a6
Reviewed-on: https://review.gerrithub.io/c/445941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Some users require to do write zeroes operation when
erasing data on lvol. Currently the default method is
unmap. This patch adds flag to spdk_rpc_construct_lvol_bdev
call that changes default erase method. This is also a base
implementation for possible future function for erasing
data on lvol bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8964f170b13c2268fe3c18104f7956c32be96040
Reviewed-on: https://review.gerrithub.io/c/441527
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Everything need to be removed to get the remove callback called.
Otherwise we will end up with dangling devices and user callbacks
possibly not called.
Fixes#567
Change-Id: I37259f6cd97268060170a6b17a0c0df4d543a224
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440890
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If IO fail e.g. during hotremove error shouldn't be ignored as this will
trigger operations (like crc checking) that shouldn't be done. Also
false error messages are printed.
Change-Id: Ie023ddcd9bdba2378e69808302ff9978497c7852
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440889
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Replaced divide_round_up() from blobstore.c, lvol.c and reduce.c with
new spdk_divide_round_up() from util.h.
Change-Id: I013383ac286ca52b5c15c7fab4fb40ad97b92656
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/437649
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When last clone of a snapshot is being deleted
we remove that snapshot from snapshots list.
We should not do that as it still works as a
snapshot and it is read-only, but it does not list
as a snpashot from get_bdevs. Instead remove snapshot
entry from the list when blob that represents that
snapshot is being removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8d76229567fb0d9f15d29bad3fd94b9813249604
Reviewed-on: https://review.gerrithub.io/436971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_bit_array_find_first_set() returns UINT32_MAX if no
set bits are found. But spdk_bit_array_find_first_clear()
would return the size of the bit array instead in this case.
(Note: the comments say size of the bit array + 1 which was
incorrect)
So this patch makes spdk_bit_array_find_first_clear()
consistent with spdk_bit_array_find_first_set() and returns
UINT32_MAX if no cleared bit is found.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I44c1e674149f8c2e87122800d5db45a2851f0bef
Reviewed-on: https://review.gerrithub.io/428225
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I994b5d46faffd34430cb39e66225929c4cba90ba
Reviewed-on: https://review.gerrithub.io/414935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch just adds the call, but doesn't change behaviour of blobstore.
io unit size remains same as page size.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Idcd1b7d5126fc7cacf12c996188bd41e2c9a744d
Reviewed-on: https://review.gerrithub.io/425355
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a string name used for debugging only.
Change-Id: I9827f0e6c83be7bc13951c7b5f0951ce6c2a1ece
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is in response to a Scan-build error with Clang 6.0 but is a real
bug. If we don't match up our IOVs properly with the lenght we provide,
we could jump over the iov list into invalid memory in
_spdk_rw_iov_split_next.
Change-Id: I472a7aa53027af0a18ebeee8226e0b008447cce4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424248
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Blobstore uses 1MB cluster size by default, but logical volumes
override it to 4MB by default. When an existing lvolstore is loaded,
all cluster calculations were being done based on the 1MB size - not
the 4MB cluster size read from the superblock. That would result
in asserts (due to mismatched used cluster mask size) and all kinds of
other possible weirdness with subsequent operations.
Fixes: 2c91e91907 ("blobstore: Save the original size of the disk.")
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5d57c2b64aba791903e69560b9fe5684a72669df
Reviewed-on: https://review.gerrithub.io/420582
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is not an error if bdev is smaller than cluster size so convert this
error to infolog. This fixes false error message dring examine process.
To return proper error message when creating blobstore using RPC the
_spdk_bs_alloc was adjusted to return errocode that is propagated up and
converted to "No space left on device".
Fixes#316
Change-Id: Ic9803720a55125fcfa34263346f2d9e1aae03a53
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/420054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It will save the space of spdk_xattr when put uint16_t after
uint32_t
Change-Id: Ie0712d8c3b16d90fc354847509fd87e1ffd93916
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/419453
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch prevents to copy cluster data when there is not
backing blob to improve cluster allocation performance
in thin provisioned blobs.
Change-Id: Ie766d2e5274daa74c2b13b2198a20205e3417467
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/417938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Before this patch when serializing extents,
unallocated clusters were treated as separate lba.
This caused metadata to grow without need.
Change-Id: I5d66466dda5f5e6d4d53f4ed5bd0bac18c74be96
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/419180
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Save the original size of the disk to metadata when it is first created.
On load verify that the disk did not change size.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I535940ee188425ee3b394effd99653cc073d541e
Reviewed-on: https://review.gerrithub.io/410896
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds an API to decouple blobs parent removing dependency
on it. Blob stays thin after this operation.
Also unit tests for blobstore inflate are improved and reused with
decouple parent functionality.
Change-Id: I96dfee467c78cf4f4d929ec7bc05263f7a23a8aa
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/410829
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When snapshot is created from a clone, clones parent is not
inherited.
This patch also updates unit tests covering this case.
Change-Id: I42eb00fe2f33504c5b5c5beded20c4ea65eaff67
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/414804
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
4KiB page size * UINT32_MAX = 16TiB - so we must use
a uint64_t for any blobstores on backing devices of
16TiB or greater.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ief13cf06d413477dc8ab4f9fe0ff4c0631566c00
Reviewed-on: https://review.gerrithub.io/416448
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure we don't truncate the LBA when using it to serialize the
cluster array into an extent list.
We also need to add an explicit cast in _spdk_bs_cluster_to_lba
to ensure the conversion doesn't get truncated. While here, do
the same cast for _spdk_bs_cluster_to_page.
Change-Id: If4e65ed86550e39dfa39826930dfafac158d519c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.gerrithub.io/416231
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is duplicated in three places; combine them into a shared helper
function.
Change-Id: I47682da8fa8b13134a6422c6a0e8a4d68f12ee36
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416257
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I4830bcd2342551a6a02afd6e4551acbf463eb44c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416256
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previously, the blobstore load code was iterating over the masks (blob
IDs, clusters) byte by byte, then bit by bit in a nested loop, but it
was rounding incorrectly and skipping any bits set in the last byte if
the total size was not a multiple of 8.
Replace the nested loops with a single loop iterating over bits to
simplify the code and avoid the bug.
Change-Id: Ib365421bf3ba1002d2e5634b34c2bcf9ef7d1267
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416230
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I744948dd98cb210b41e59bfed1ef8a448f77ff07
Reviewed-on: https://review.gerrithub.io/415254
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add spdk_bs_dump which dumps low level blobstore metadata
information to a specified FILE.
Also add a corresponding -D option to blobcli which
utilizes this new functionality.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad018b70f8caa4f950d55dd308b9000d55d885ae
Reviewed-on: https://review.gerrithub.io/414479
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I6babd4cf990bf19b510db88bdfb0ca81e29d9252
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414700
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
_spdk_blob_insert_cluster_on_md_thread() is defined and used in the same
file, so it doesn't need to be exposed outside of the compilation unit.
Change-Id: Ifc327a3d80cae47b28fa2a9ba77471a9b80c83e0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414702
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I23c34d4dcb542aa9ab3fa8cb734cf9cc0e0fc5da
Reviewed-on: https://review.gerrithub.io/409144
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I6182eb3a77d23db7088703492d71349e3a4b6460
Reviewed-on: https://review.gerrithub.io/399366
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The patch disables writing dirty bit during blobstore loading.
Instead, dirty bit is written prior to the first metadata update.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7be81009a99f09048bf23749c8f6ef5e9f7b3751
Reviewed-on: https://review.gerrithub.io/410884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
This will become the public interface for implementing
bdev modules. Right now the file exposes too much of
the guts of the bdev layer to modules, so it needs
to be stripped down.
Change-Id: Ie8b8c3271d51fdb8d0c24a80244b3f3e510c8790
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412297
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These were marked as deprecated in v18.04 and scheduled for removal in
v18.07.
Change-Id: I2587bcaf89cdcc757ad902ac42ccd9adce9c8f92
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410727
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Inflate call can be used on thin provisioned blob or clones.
Function allocates all unallocated clusters on specified blob and:
- For clones, copies data from backing blob.
- For thin provisioned blobs, clusters are zeroed.
After this call all dependency from specified blob is removed
what allows deletion i.e. snapshots.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Ibff569e45b12068b2fb46557156be348b36c252b
Reviewed-on: https://review.gerrithub.io/399367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Thin provisioned blobs mark unallocated clusters with
cluster ID 0. During recovery from a dirty shutdown,
we must not try to claim cluster 0 - we should ignore
them instead.
Fixes issue #291.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If0dd42416f5de8d9972073bf6ed44eb8bc655415
Reviewed-on: https://review.gerrithub.io/410065
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
On operation split, payload pointer should be incremented by the number
of bytes, not by op_length which indicates the number of pages.
Change-Id: I5d40b6ff7f39b599fe8c8072ee7879848a6af848
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/409201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
One of intended uses of spdk_blob_get_clones() is to retrive
number of clones from a snapshot. This is done by passing
NULL pointer for destination array.
In this case SPDK_ERRLOG is superfluous, as ENOMEM should
be handled appropriately by called.
Example of correct usage producing this error log is in vbdev_lvol.c
vbdev_lvol_dump_info_json().
Change-Id: I032ca12af01caddf6f540e39d49c2adba40a6ff1
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/409164
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This commit provides an API to obtain an information about
snapshot and clone relations.
The main objective is:
1) Determinate if we can delete snapshot (if have some created
clones),
2) Provide an information about parent/children nodes to the upper
layer (e.g. lvol)
Realization:
1) Structure parent-children is stored in the blob store object
and updated on:
a) blob store load,
b) blob create/delete,
2) Full information about parent-children is provided via new API:
spdk_blob_get_parent() and spdk_blob_get_children(),
Note:
While we don't store an information about these relations in the
blob store, we need to open all blobs on blob store load to create
it. It should be considered that it have an impact on the blobstore
loading performance.
Change-Id: Ie0237fa5b93af01aa73d1f68ac1694e653fb75e5
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/405025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch introduces API to get some blobs capabilites:
bool spdk_blob_is_read_only(struct spdk_blob *blob);
bool spdk_blob_is_thin_provisioned(struct spdk_blob *blob);
to be used in upper level in the unified way.
Change-Id: I4411bb3f4dd0c64826ae16a66141b2911cbaab79
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/405022
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We know exactly how long the name is, so there is no need to use a C
string function to copy it.
Change-Id: I21b5f1e318555b46729582ab6a1e6bd163c85205
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406984
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Iad67be79d0ddd8c498950c4f7b1b3203e47a7a41
Reviewed-on: https://review.gerrithub.io/393936
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds new feature of blobstore.
New call creates a read-only snapshot of specified blob with provided options.
NOTE:
This patch doesn't cover recovery operation if snapshotting fails. This operation
will be implemented and added later.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: I470ca13525638fa6df485d508b3adf71b6b69c0b
Reviewed-on: https://review.gerrithub.io/393935
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To support resize operations during I/O, we will need
to send messages to each thread to quiesce I/O while
the resize operation is in progress to guard against
the cluster map memory changing while another thread
is accessing the cluster map.
Therefore, spdk_blob_resize needs to be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ida037334739b4b80a1dbc76e8f1c70bca8b73582
Reviewed-on: https://review.gerrithub.io/404616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some error paths before _spdk_bs_alloc did not
destroy bs_dev.
After succesfull _spdk_bs_alloc, destroying is done
in _spdk_bs_free.
Change-Id: Ib69ae9707e12a646af80f7892af49cc4f79c199e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405223
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Blobstore supports only block lengths that are less than
SPDK_BS_PAGE_SIZE or when multiplication of block len
results in SPDK_BS_PAGE_SIZE.
This was checked only on spdk_bs_init(), but not spdk_bs_load().
When not checked, it caused issues with lvol store tasting.
During tasting, there is an attempt to perform spdk_bs_load()
on a given device.
It was possible to hit asserts in blobstore by creating
malloc with block size 8192.
Change-Id: I30b62bebad405b581eb2158925884adc616d9b92
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/404537
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Upcoming patches will make spdk_blob_resize() asynchronous
to allow for resizing while I/O is in progress. During
blob creation, it is not possible for I/O to be in progress,
so just use the internal _spdk_blob_resize which will
remain synchronous and called only after I/O is frozen.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02128612a5f1bcd8bb236da113b05e88aa52c310
Reviewed-on: https://review.gerrithub.io/404613
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This internal function then will match noun/verb order
of the public spdk_blob_resize function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0d49af6502438b3571eebe5c87abe96a8fb77658
Reviewed-on: https://review.gerrithub.io/404612
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously when operation for blobstore was spanning multiple
clusters, it was split into multiple operation processed in a batch.
This made it possible to max out channel ops when using large enough
operation. It was encountered when issuing unmap for whole device.
Now single large operation is processed sequentially, making
it take at most one ops from channel.
Fixes#251Fixes#250
Change-Id: I132309877ba3b2d7217332daf1025fb5f9ee74d0
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403306
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This better matches the style in the rest of SPDK.
No functional change - this is a pure find/replace of
spdk_bdev_module_if to spdk_bdev_module. Instances of this struct will
be renamed in another patch.
Change-Id: I3f6933c8a366e625fc3a1b6401aee26ee03ba69c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403368
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
BlobFS shutdown path needs to be investigated more with these
changes.
This reverts commit a137b9afd0.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b04b24e178945d62db20668b9e500f278ae955b
Reviewed-on: https://review.gerrithub.io/403600
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For any given blob, if an spdk_blob_sync_md() operation
is already in progress, queue additional spdk_blob_sync_md()
operations until the previous one completes.
This ensures proper ordering of writing metadata to
disk.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2051e8cb5b8d1a033ec1238cb4811232110aa0f4
Reviewed-on: https://review.gerrithub.io/401257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds possibility to set internal xattrs on blob
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I2d0f14558e4a1af7071ee1a4f59aaf9f14bea2d9
Reviewed-on: https://review.gerrithub.io/396418
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unit tests implemented in following patches.
This is rebased patch from https://review.gerrithub.io/#/c/396648
merged as commit c1174e6895
and reverted in 0847f27b54.
Change-Id: I3d152bf7847c83bf75149edd61564c1f393927d8
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/402529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For some xattrs we need to know its value even if blob is in loading
state, e.g. BLOB_SNAPSHOT xattr value when blob is loading.
Change-Id: I1cd7805cf33be64cf59792f85a270e9b536e23bd
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/403062
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Before this patch super_blob id for blobstore was persisted
only during spdk_bs_unload. If power fail occurred after creating and
syncing blob, super_blob id was lost within blobstore.
Lvol store metadata would be lost, if proper shutdown
didn't occur in first SPDK instance run since creation of lvs.
This fix changes setting super blob to be instantly persisted
on disk in super block. Without affecting clean bit in super block.
Change-Id: I578f1fc8717e2d7968ad506fa4dead7507a5e0b4
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/398804
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I5e636c4c9d930de0d9e6eadd453f0d17eadaf45e
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/402530
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This change wasn't correctly rebased and needs to be updated to compile
against the current blobstore.
This reverts commit c1174e6895.
Change-Id: I529608bee7323cb626d8c36dff15adc9ba24ad26
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402352
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unit tests implemented in following patches.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ib18c9060f527bd22bfdbed74e96871a6e0551ead
Reviewed-on: https://review.gerrithub.io/396648
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently only thin_provisioned zeroes back_bs_dev is supported.
There was no unit tests for channel in this bs_dev, because it's never used.
However, unit tests in patch https://review.gerrithub.io/c/393935/ show that channel is wrong.
This patch passed proper spdk_io_channel to callback function.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia288ef6c35343ce533ea3f74603e73f823a18181
Reviewed-on: https://review.gerrithub.io/400955
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
blobfs and lvol can now use this to automatically iterate
all existing blobs during spdk_bs_load. Changes to blobfs
and lvol will come in future patches.
This will also be used in some upcoming patches which need
to iterate through blobs during load to determine
snapshot/clone relationships.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic7c5fac4535ceaa926217a105dda532517e3e251
Reviewed-on: https://review.gerrithub.io/400177
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Finish the sequence first, before calling _spdk_bs_free().
Otherwise synchronous bs_devs (like we use in the unit
tests) cause the sequence memory to get freed via
_spdk_bs_free() and then we try to finish the sequence.
This eliminates the need for g_scheduler_delay and
_bs_flush_scheduler() in the blob unit tests. But don't
remove them - they will be useful in upcoming unit tests
for queued persist operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I09aac3ae4d3a56ff8e04a5b822fcd6746f13afc3
Reviewed-on: https://review.gerrithub.io/401267
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No functional change - this just separates out the
code that creates the persist ctx from the code that
actually performs the persist operation.
Part of series to enable queuing persist operations -
this will be useful for starting a previously queued
persist operation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie1966ff2a477f3075c36f90560010d036658f803
Reviewed-on: https://review.gerrithub.io/401255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaef32731b05a53ac0707524d78086eedc89d6af6
Reviewed-on: https://review.gerrithub.io/401254
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I096fb24dd2fe2fc4dd97d80c957c328d960fb867
Reviewed-on: https://review.gerrithub.io/401073
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_blob_close() and spdk_blob_sync_md() currently do their
own CLEAN state. To consolidate the state checking code,
have both functions rely on the check in _spdk_blob_persist()
instead.
This will reduce code but more importantly is needed for
some upcoming changes for queuing persist operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I38118624b4fad6f18c4b7466d9ddfa0915c3fce0
Reviewed-on: https://review.gerrithub.io/401065
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These are common functions that can be called from
any function that reads or modifies a blob's metadata to
perform necessary asserts.
This will also fix several places where blob metadata
functions were asserting the calling thread context,
but not the current state of the blob.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e16c082a27c439311f8ff214335adadfa715497
Reviewed-on: https://review.gerrithub.io/401053
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
All metadata operations are now done on the metadata
thread, so we no longer have to worry about one thread
updating in-memory metadata structures while another
thread is transferring the in-memory structures to
on-disk structures.
This does not protect against multiple sync operations
outstanding at once - that will be coming in an
upcoming path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibf33edf4d41d867c96a38df017737e9ceb87fa58
Reviewed-on: https://review.gerrithub.io/401056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The md (metadata) thread is always the thread that
initialize/loaded the blobstore. Metadata operations may
only be performed from this thread. This patch adds some
more asserts in metadata functions that were previously
missed.
While here, also update some of the blobstore documentation
related to this.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5cafdb3ba402ceb6c3ccb6fdd9d36e7768f59f39
Reviewed-on: https://review.gerrithub.io/400885
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These new names are much more clear and are aligned with other
functions such as spdk_blob_close.
Keep the old names around for now but deprecate them. We will
remove them in next release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idc60fd0b19fa2a8b0247a1f5835774d342e721f9
Reviewed-on: https://review.gerrithub.io/400884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is needed for an upcoming change which will
prevent metadata functions from being called on
threads other than the metadata thread. Without
this change, there was no way for this function
to return an error if it was called from the wrong
thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67e591140194ff6ad250878168f6b166a1ff2282
Reviewed-on: https://review.gerrithub.io/400883
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There was some thinking that we would need to allocate
I/O channels on a per-blob basis to handle dynamic
resizing during I/O. Making spdk_blob an opaque handle,
with the existing spdk_blob structure renamed to
spdk_blob_data was a first step towards making that
happen. But more recent work on blobstore has
simplified the resizing approach, so this spdk_blob_data
is no longer needed. So revert it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22e07008faceb70649ee560176ebe5e014d5f1a3
Reviewed-on: https://review.gerrithub.io/400881
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This reduces some code duplication and ensures all
successful load operations (whether or not it included
recovery after power fail) through the same function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia463ce6ebe976ab2420525d86962e8fe54ad04d7
Reviewed-on: https://review.gerrithub.io/400164
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Patch adds internal version of xattr functions to allow
operations on internal xattrs, which are not visible to
upper layers.
When there is at least one internal xattr set, also
SPDK_BLOB_INTERNAL_XATTR flag is set in invalid_flags to prevent
loading this blob in previous spdk versions.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Iec918ec858f069f7cd9f36d5e8f0495ffa4a42d8
Reviewed-on: https://review.gerrithub.io/395122
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I8b570802b05b8e03802d3c2b68a1e7644ea548ac
Reviewed-on: https://review.gerrithub.io/396572
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I277f7288427788e7a107b143331753fd5b23f16f
Reviewed-on: https://review.gerrithub.io/396571
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This change will allow reusing this structure for both internal
and external xattrs as well as in functions having optional xattr,
but missing other options (i.e. snapshot, clone implemented in next patches)
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia6619a75efa0a100168a6f8317be274823af04ab
Reviewed-on: https://review.gerrithub.io/396417
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Icba20351c9ca76397393064b41013c527084853e
Reviewed-on: https://review.gerrithub.io/396385
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For thin provisioned blobs we allocate dma memory
required for copying cluster from backing device.
When cluster size is too big dma allocation may fail
silently (only IO error).
Use PRIu32 to print out the cluster size, and while
here, fix two other places that were using %d to print
cluster size instead of PRIu32.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I098b1a58aee2f0d3f4ead7aa326ecdb63a5b53d8
Reviewed-on: https://review.gerrithub.io/397563
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3c7d2096f549a88b4a9884c0026d15d3bcd8dc67
Reviewed-on: https://review.gerrithub.io/396387
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibc9609ad36188006e9454e5c799bccd8a92d7991
Reviewed-on: https://review.gerrithub.io/391422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be useful for backing thin provisioned
blobs in the future.
Change-Id: I78cf8cda39e8dff42da69b79ed460797d7494af1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/397043
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be needed for thin provisioning, since a write
I/O may result in needing to insert a cluster into the
blob and that write I/O may not have been performed
on the metadata thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I84b0cb6e7af87b1f9c6cab4e2c24fa26b12e2c06
Reviewed-on: https://review.gerrithub.io/396737
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This enables some code reuse for future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I296a6c5c0915da4a77a1ab43e8f10a335b7d16d0
Reviewed-on: https://review.gerrithub.io/396736
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will be used in the upcoming thin provisioning
patches. A thread the wishes to insert a newly
allocated cluster into the blob will send a message
to the metadata thread to perform to call this
function, and if it succeeds, sync the blob's
metadata.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I26fcca235ea0d7a187b9fe559851290b6db13649
Reviewed-on: https://review.gerrithub.io/396711
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For now, use this to add some assert() calls to ensure
per-blob metadata operations are only called from the
thread that initialized/loaded the blobstore.
Upcoming patches will utilize this for metadata updates
required due to cluster allocations on thin provisioned
blobs. In that case, the cluster allocations may not
always be done on the metadata thread - but we want
the metadata thread to actually do the metadata sync
operation to guard against races from allocations on
multiple threads in parallel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa0adfe8b7e61ba770449d1e076126ecb9d7a556
Reviewed-on: https://review.gerrithub.io/396712
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Currently, there is no possibility to save read only blob to disk.
This patch modifies behaviour so that read only flags are applied after syncing blob.
This is analogy to resize, set xattr and remove xattr operations.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Iffed601c78cb83231bb20e7ef05b73847dc3c95a
Reviewed-on: https://review.gerrithub.io/394243
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
iovcnt value was set to 0 instead of being assigned from
input argument.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I0f7e89871357f5db9a5a34c801176bc5c7870021
Reviewed-on: https://review.gerrithub.io/395959
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows a channel's request_set resources to be
used for queuing I/O requests. This is needed
for upcoming thin provisioning functionality,
where we must queue I/O requests that need to
allocate a cluster, if another cluster allocation
is in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie8d3e799afc0b56bc95ba5ecab11253d8bc8608f
Reviewed-on: https://review.gerrithub.io/395037
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now all operations (both single buffer and iov-based
payloads) which span a cluster boundary get split into
separate blob calls for each cluster.
This will simplify upcoming patches that need to do
special operations if a cluster needs to be allocated.
This code can now be added to just the single cluster
operations and not have to worry about splits. It
will also simplify the code that will eventually queue
requests which require a cluster allocation if an
allocation is already in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22a850e6e23e3b3be31183b28d01d57c163b25b1
Reviewed-on: https://review.gerrithub.io/395035
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
A future patch will queue an operation in
_spdk_blob_request_submit_op_single if the cluster is not allocated
and another allocation is already in progress. If the queueing fails
because of no channel resources, we want to fail the callback and
need to do this before creating the batch.
This causes a bit of code duplication, but in the end should make the
code easier to read.
While here, pass spdk_blob instead of spdk_blob_data to
_spdk_blob_request_submit_op_single. This simplifies a future patch
which will need the spdk_blob when queueing an operation. It also
incidentally makes it consistent with _spdk_blob_request_submit_op_split.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib0ec0e5138eac5bf208fcde6676cd2a77a1a663f
Reviewed-on: https://review.gerrithub.io/395196
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For I/O that do not span a cluster boundary, just issue
a single batch command to underlying block device.
For I/O that do span a cluster boundary, issue a batch
command for each against the blob (not the block device)
for each cluster accessed by the I/O.
This is all in preparation for upcoming patches which
enable thin provisioning and hence cluster allocation
in the I/O path. It will simplify implementation of
the cluster allocation path since now that code only
needs to be concerned with a single allocation at once.
Splitting for readv/writev will be handled in a
later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia2341abbda599dace3357c4eec06ab6602ef81a8
Reviewed-on: https://review.gerrithub.io/395027
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This breaks out the logic for building a batch for
non-iov operations to a separate function. Future
patches will do further modifications on this
new function - separating it out into two separate
functions, one for operations that span a cluster boundary
and one for those that do not.
No functional change here - this is just moving code
around to reduce size of upcoming patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id1e67e6305d7ba2317700e1477e12c749ebf664c
Reviewed-on: https://review.gerrithub.io/395026
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These will be used to implement user request splitting
on cluster boundaries.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I29e00ae9555fdd8a149e92be3cf88a2e528f5c0e
Reviewed-on: https://review.gerrithub.io/395021
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This clarifies that the read/write/etc. operation is
being performaned on the block device. This
clarification will be important in some upcoming
patches which will batch similar operations on a
blob (as part of splitting a user request into smaller
operations if it spans a cluster boundary).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic574804c15f769ee80c1b6f68ca3b77ec910f0f6
Reviewed-on: https://review.gerrithub.io/395017
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These were unused in blobstore so remove them for now.
This reduces number of code changes in some upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02e04f7d84fff1d2a70f371d222425f373a5d4ff
Reviewed-on: https://review.gerrithub.io/395016
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for some future blobstore.c code that will use these
bs_dev functions directly making possible to read from different device
than the one in the current context.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I55b15544ea4b53475c4b72ee5c92ff1c0a2b8c88
Reviewed-on: https://review.gerrithub.io/393781
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I35779dc547e0c084086ec6d9bf44f86850cb7f05
Reviewed-on: https://review.gerrithub.io/393780
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iadb29a8ce8dcebfea68d4feeb5f3de1bb3124f16
Reviewed-on: https://review.gerrithub.io/392286
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib3470fbac49e92308ed14e20ccde6655354f2580
Reviewed-on: https://review.gerrithub.io/389577
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch provides logic for returning errors instead of
assert when size is larger than blobstore size.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I16d12338e2b682c39bd33d507d57ea126501a0d7
Reviewed-on: https://review.gerrithub.io/392749
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recovery code did not claim clusters taken by metadata.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If6726eddd22f4e1a3f9814b2348243155fb0fdb9
Reviewed-on: https://review.gerrithub.io/394173
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This only adds the option and metadata flags.
Actual functionality will be added in an upcoming commit
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I66015f48f34d4c7c64fce1831ebaed134098407c
Reviewed-on: https://review.gerrithub.io/390196
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch fixes issue when blobstore doesn't serialize flags
when there is also at least one extent or xattr.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I85d5031dc45df510cebe1acf4694ab62bca2e720
Reviewed-on: https://review.gerrithub.io/393770
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We need to make the channel operations numbers configurable for blob.
Reason: for iSCSI tests, if there is one CPU core, there will be only
one channel, thus read stress tests would
fail since we need more operations for blob channel.
Select a value equal to the small buffer size(8192) for
bdev layer, thus we can solve the iSCSI read issue
correctly. Since for bdev read, we currently only
allow 8192 active bdev I/o requests, so this solution should
work.
PS: Current solution is still not perfect, I think the very
precise fix is that we need to restrict sending I/Os
to the blob, if there is no channel operations. Though
current code, we have retry I/O in bdev , but it still fails
the iSCSI high pressure test.
Change-Id: I211f7a89d144af2c96ad4cc1bd7ac8e94adc72e7
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/393115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Only Makefiles for libraries that directly depend on DPDK (rather than
the SPDK env abstraction) should add $(ENV_CFLAGS).
Change-Id: Ifdf44d3ef8c42bbf7f20edd524b330d00658235b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392818
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ibffb43e39b44e5f443d3dfbfa5b5d7dcac3243ef
Reviewed-on: https://review.gerrithub.io/391182
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ic2c23d16360b26359c2a32920b89f2f3a21a2a9a
Reviewed-on: https://review.gerrithub.io/391191
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This can be used for two purposes:
1) more quickly iterate the blob list, avoiding
metadata pages that are valid but not the first
page in the blob's metadata list
2) close races between delete and open operations -
now we can clear the bit in the blobid bit array
when the delete operation is in progress, ensuring
no one else can try to open the blob
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3904648fd6fa656cb98c9e17ea763ed5a84ef537
Reviewed-on: https://review.gerrithub.io/391695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for a future change where we need to use the
recovery path when loading pre-v3 on-disk formats, since the
older disk formats do not save a blobid mask.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia94d56450202f81373c3de94237eca2dfd96526c
Reviewed-on: https://review.gerrithub.io/391694
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This eliminates a bunch of code duplication. This also
fixes a couple of places where the ctx->bs was not being
freed in the load fail path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie6b0a4a653b5c80edf14086801b75457852a4736
Reviewed-on: https://review.gerrithub.io/391693
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iba33c55f129c60fad2d58f5254dec5c54ed56805
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/388217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This ensures we do not end up with a racing close v.
delete. If we decrement the ref up front, we could
start the close process (which may include persisting
metadata) and then also allow a delete operation to
start. It is safer to wait until the close operation
is done before decrementing the ref count, because then
it will eliminate this race condition (the delete op
would immediately fail).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad7fd8320d2c9b56f3c4fce054bcb6271e19ad38
Reviewed-on: https://review.gerrithub.io/391493
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures all blob-loading functionality goes through
the single spdk_bs_open_blob function which will simplify
some upcoming changes around managing global metadata
state from multiple threads.
This will also help prevent races where a delete operation
has started followed by an open on the blob that is
being deleted. Those specific changes will be in an
upcoming patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I17e995145ab23068b816b44c33483b0708f5f563
Reviewed-on: https://review.gerrithub.io/391486
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Found during unit testing for blobid_mask coming in a future
patch - the unit test will be added as part of that future
patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iecdde6ba16c5af9caf59214f328ddc22aae71e94
Reviewed-on: https://review.gerrithub.io/391692
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
