Each reactor and each thread is assigned with one fd group.
At the same time, each thread is treated as one interrupt source
registered into its corresponding reactor.
The egrp function for reacotr is the only block point waiting
for events.
Change-Id: Id092e66591b07b445342f8ae16dc218d28887427
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Interrupt is aiming to support interrupt
mode in SPDK application framework.
fd_group is implemented by epoll on linux.
fd_group can be inserted into thread and reactor
to do epoll_wait internally in order to avoid polling
Change-Id: I9077ad648a97fbd68fd46f43de2e16440bedab0b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4268
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Prior to this patch the bdevperf application enabled using the zcopy API
by default. This means that on bdevs that don't natively support zcopy the
API emulates zero-copy by allocating a buffer. In my test environment, I
measured a 25% decrease in IOPS when zcopy was enabled. This patch changes
the default value so that zcopy is disabled by default. For bdevs that support
zcopy, use the -Z flag to enable using zcopy API.
Change-Id: Ib7e5c24f76eb16ffef038687daca58c0ffad1c1c
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch removes legacy config from bdev fio_plugin.
Both configuration options are valid, but they should
point to JSON files.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5ae8102752317fe6da8ae7d0a69f444cb0751efa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3721
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove spdk_app_get_running_config() that allowed printing
legacy configuration by the apps.
Along with usr1_handler callback that was used to call that
function.
It was only used in iscsi_tgt so it is removed there.
The app_repeat test was using SIGUSR1 to trigger a
spdk_app_stop/spdk_app_start cycle. But we can use
SIGTERM for that instead. While here, do a bit of
cleanup in the app_repeat test app.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie8449e8bcd979b237c68ef94f50fb7a3cb6c19db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4750
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes callback function for subsystems to
present their options for legacy config.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I63076fc03eff45da5d57fab03501602922a20e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4749
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes function for bdev modules to
present options of the bdevs.
blob_bdev.h refers to the spdk_bdev_module, so would need
to be bumped too.
At this time spdk_bdev_module is left unchanged to prevent
that.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3cacb087c998d928c5d8c2722b7f041d82bb43f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4748
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Since namespace types were introduced in NVMe, the CC.CSS register
has a new value (SPDK_NVME_CC_CSS_IOCS) which indicates that all
supported command sets should be selected/enabled. This possibly
includes command sets other than NVM and ADMIN only.
Therefore, if a SPDK application wants enable all the command sets
that the controller supports, it has to explicitly set
opts->command_set to SPDK_NVME_CC_CSS_IOCS.
To avoid possibly a lot of SPDK applications having to set this
parameter, check if the user requested a command set explicitly,
if not, make SPDK automatically use the most reasonable default,
based on the supported bits set by the controller.
The most common case is that you want to enable (all) the command
sets that the controller supports.
A user will still be able to restrict the controller to only use
the NVM command set (or ADMIN only), by setting opts->command_set
to a specific value.
Since the current default command set value specified by
spdk_nvme_ctrlr_get_default_ctrlr_opts() is SPDK_NVME_CC_CSS_NVM,
which is defined as 0, we cannot know if the user specified a
command set explicitly or not.
To solve this, change the default command set value specified by
spdk_nvme_ctrlr_get_default_ctrlr_opts() to CHAR_BIT (0x8), which
is larger than the largest value that can be set in CS.CSS (which
is only 3 bits wide, thus 0x7).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I45ec148d3667ab87c41fbfb6d6612a1e0e5c9d9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_bdev_open_ext() requires the caller to use bdev_event_cb_t
and bdev_event_cb_t is more extensible than bdev_remove_cb_t.
Hence use bdev_event_t as an argument.
spdk_bdev_open_ext() calls spdk_bdev_get_by_name() inside and
spdk_bdev_create_bs_dev_ext() calls spdk_bdev_open_ext() inside.
The caller needs to know if the spdk_bdev_get_by_name() succeeded.
Hence spdk_bdev_create_bs_dev_ext() returns return code by return
value and returns the created bs_dev by double pointer.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c225bfb66db036439c69c459f39c86684d8a540
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The internal vhost library is used when DPDK's version
is older than 19.05 and the experiemntal vhost nvme
target.
For the CONFIG_INTERNAL_VHOST_LIB option, SPDK doesn't
enable this option by default over one year and CI
doesn't cover it either, so we may remove it with
this release.
As for the vhost-nvme target, since we are developing
a new vfio-user target solution, it's OK for us to remove
it now.
Change-Id: Ib2cce1db99cd09754307c2828b3187f2d4550304
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4562
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After decoding a JSON object we had to free the parsed
strings one-by-one. Not anymore.
Change-Id: I819f1d533e397aa9babca58b5500c38ac01a963d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2753
Reviewed-by: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in GPT bdev module.
Please note that disabling probing only for GPT partition does not
have a corresponding RPC.
Similar functionality is possible for all bdev modules at once via
`bdev_set_options --disable-auto-examine` RPC then followed by
`bdev_examine` RPC for particular bdev.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a106b3dc0953166264b11c2e95c4433163fcd3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4624
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are more transport on the way and we don't want to add
all their various opts into the single, generic structure.
We'll pass the JSON structure to transports instead. Then
the transport code can custom pull from the JSON any param
it wants.
To complement that, transports will now also have their own
JSON config dump callback. This was only done in the generic
nvmf.c so far, with conditions for RDMA and TCP.
Change-Id: I33115a8d56cec829b1c51311a318e0333cc64920
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: jiaqizho <jiaqi.zhou@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add an new API spdk_bdev_part_base_construct_ext() to pass not bdev but
bdev_name to fix the race condition due to the time gap between
spdk_bdev_get_by_name() and spdk_bdev_open(). A pointer to a bdev is
valid only while the bdev is opened.
In the new API, spdk_bdev_get_by_name() is included in
spdk_bdev_part_base_construct_ext() and the caller has to know if
the bdev exists or not. Hence spdk_bdev_part_base_construct_ext()
returns return code and returns the created part object by the double
pointer.
Another critical change is that base is just freed if spdk_bdev_open_ext()
failed with -ENODEV. The reason is that if we call spdk_bdev_part_base_free()
for that case, the configuration is removed by the registered callback
and so bdev_examine() will not work.
The following patches will replace spdk_bdev_part_base_construct()
by spdk_bdev_part_base_construct_ext() for the corresponding bdev
modules.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2db027a159559c403cdfbd71800afba590b0f328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_examine_bdev is not a public SPDK API but a JSON RPC method.
Hence move the description from the bdev section to the RPC section.
Additionally, clarify auto_examine is disabled by setting bdev_auto_examine
of the RPC bdev_set_options to false.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6de7db9769a20ad8435292a6fb302f102ef5d68d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4646
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Log flags could also report on SPDK_LOG_INFO level by using
SPDK_INFOLOG() macro. Yet this did not result in additional
log due to check for debug build.
This patch allows release builds to use that flag.
Meanwhile the -L option besides turning on particular log flag
changes print log level to SPDK_LOG_DEBUG.
Applied changes to serveral applications to follow the
behaviour of event framework.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib0d6cce33263c350d6d83300d60e7d15bdfe4b64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4557
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This change will allow external libs to register
SPDK log flags and use log macros by external libs.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I03ef088580bbf23bd22ad1a36817ca84c5ba8edd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3954
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, the scsi bdev only supports the hotremove event,
and the scsi library uses the deprecated `spdk_bdev_open` function.
In this patch, add the resize event support, so the upper layer
could do more actions, like vhost-scsi could notify the guest os.
For the scsi compatibility, add _ext suffix for some public api.
Change-Id: I3254d4570142893f953f7f42da31efb5a3685033
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We have some RPCs defined in the bdev library itself,
others in a separate bdev_rpc library. There's no need
for the separate library - just move them all into the
bdev library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I298eedb88924197e64eb315369efb10f402903a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4364
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to have the application-level RPCs
defined separately from the event library itself
(which defines the application framework).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic264ed761f5ec1a40d604e63395c5740af4be1a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Updated required NASM version to 2.14,
since intel-ipsec-mb v0.54 now requires it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I10cee6aea941593b828a6a171297d7e997d0f30c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3868
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The poller is now created internally to the library whenever a target
is constructed. Applications are not expected to poll for connections
any longer.
Change-Id: I523eb6adcc042c1ba2ed41b1cb41256b8bf63772
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch is used to enable placement_id getting
in sock layer and also add the rpc support.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I70de57b0ed392a0aefce9d3ff1f61ef924015a87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4146
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The bdev_examine_bdev api will examine a bdev explicitly. After
disabling the auto_examine feature, a user could call
bdev_examine_bdev to examine a specific bdev he/she wants.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: Ifbbfb6f667287669ddf6175b8208efee39762933
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3219
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When browsing https://spdk.io/doc/changelog.html
left hand side navigation bar is missing some of the
releases.
This is due to missing 'title' of particular release
that is signified by ":" right after version number.
This patch adds missing ":" and fills out missing titles
for all releases, so they show up properly on the website.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3bcb0b2e819d311a033d78101034a7adb2c3395a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3748
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Patch (e12a4f6) reverted the addition of spdk_env_get_primary_core().
The changelog no longer needs to contain this info.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9ad339f13557b9eec989a806638cb59a8b203355
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3598
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With update to DPDK 20.05 EAL requires rte_telemetry,
external make tests were missing specifying this lib.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9f5eaea46b47da48fc81b4fff0199cd75ff6af78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3483
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Not needed with new scheme around accel_task in prior patches.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic6f16654db62fe1dc51b0822f0ff92261da4494c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3212
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was sort of a clunky interface requiring a couple of inline
functions in every app that wants to use the accel_fw moving
forward. By having the accel_fw public API accept a callback arg
instead of an accel_task combined with adding a pool of accel_tasks
in the accel_fw engine we can eliminate this.
After changing the parm to a cb_arg, changes were made to all accel_fw
interfaces to put cb_fn and cb_arg as the last parms in public and
private function calls.
Related bdev_malloc changes need to be in this patch in order to pass CI.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2b75764e534562d91484a094c3352266156d8425
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3209
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Zero copy send can cause performance degradation with small
payloads. This patch adds an option to disable it if required. By
default zero copy is enabled.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I14f2b21ad375e770cb08f850360898bac675b351
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Receive pipe reduces number of system calls and gives significant
performance improvement with kernel TCP stack and relatively small IO
sizes. With user space TCP/IP implementations there are no system
calls and double buffering introduced by pipe has negative impact on
performance. Receive pipe remains enabled by default.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ic5ddee42293df2c233ba7ffbe6662de7917ac586
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We added the uring socket implemenation in 20.04, but
we did not announce anything since uring is experimental
and there is no test in our CI. Now, the uring socket
implementation can be announced because we added the
related test in our CI pool.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1c4fbf84d46f8632e7468bc9833050ba30f90649
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Calling spdk_nvmf_tgt_accept() now automatically assigns new qpairs
to the best available poll group.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3df2a2c5a28dba45c5ba0cbd1e8c28dd7e56cf9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2813
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This makes them easier to find. They are now named
spdk_nvme and spdk_bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1f6736d8f7f5b9669583731fb0b710ba54f0d50a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2679
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
`-r` and `--rpc-socket` command line options will now require
path for a UNIX domain domain socket. The socket can be still
exposed over TCP with external programs. Hence, for (some)
compatibility reasons, the test scripts, jsonrpc-client, and
rpc.py will still be able connect directly via TCP.
Change-Id: I22a935f1596ce5f9c313b5be42cb85f772368c03
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Having spdk_vhost_blk_get_dev required us to bump up the SO version
the vhost library when we updated bdev.h but spdk_vhost_blk_get_dev
has not been used publicly, and can be inlined very simply.
So remove spdk_vhost_blk_get_dev from include/spdk/vhost.h and inline
it to the place which had used it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98c233b81d7980d4e2c5bd3c0a65d747f183e1e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is used to make spdk_nvme_connect can support
the old library for compatibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49d92fb473c3cbabd8e1240785b920480202eee9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Updated submodule from branch containing DPDK 19.11 to DPDK 19.11.2
That includes fixes for DPDK vulnerabilities:
- CVE-2020-10722
- CVE-2020-10723
- CVE-2020-10724
- CVE-2020-10725
- CVE-2020-10726
Along with other fixes done between those DPDK maintenance releases.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I33e14eba54568a2313bb0020bad9be3fdfc6836b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2562
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Community-CI: Mellanox Build Bot
This parameter describes the number of admin and IO
qpairs while admin qpair always exists and should not
be configured explicitly.
Introduce a new parameter `max_io_qpairs_per_ctrlr`
which configures the number of IO qpairs.
Internal structure of NVMF transport is not changed,
both RPC parameters configure the same nvmf transport parameter.
Deprecate max_qpairs_per_ctrlr in spdkcli as well
Side change: update dif_insert_or_strip description -
it can be used by TCP and RDMA transports
Config files parsing is not changed since it is deprecated
Fixes#1378
Change-Id: I8403ee6fcf090bb5e86a32e4868fea5924daed23
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
spdk_sock_impl_get/set_opts functions allow to set different socket layer
configuration options. Options can be set independently for each
socket layer implementation.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I617e58366a153fae2cf0de1b271cc4f4f19ec451
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/607
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Optionally let the user specify what % into the buffers there should
be a miscompare if desired.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I3a5524de5e0f7cb91fcf92e76f937bdf280a515b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2109
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Along with the sw engine back end implementation for it. IDXD
back end will follow, the use in the accel perf tool as part
of verify.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia1013cd884ff71990f898320d6a22e96e16ad2a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The new RDMA provider can be enabled by passing
--with-rdma=mlx5_dv parameter to configure script
This provider uses "externally created qpair"
functionality of rdma cm - it must move a qpair
to RTS state manually
Change-Id: I72484f6edd1f4dad15430e2c8d36b65d1975e8a2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1658
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add the CRC function at the framework level and implement the
software engine back end to use ISAL. The patch series will continue
to include an option for accel_perf to test CRC as well as IDXD
implementation.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4eff3bbcf98c0bc2928a48272a57031c8b96394e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2072
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch also implements the new API for the 3 existing engines.
There was also some minor clean in one file, moving a function to
eliminate multiple forward declarations (there would have been
another one with this new API).
The next patch will use this API in the accel perf tool.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4ebc9cb3d1c588919235b5080cbeec29189efa21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2025
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
While we're here, clean up some grammar, typos, and
make sure we are using a consistent voice.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ie7a59d974a04e6beb65101fe3039db4d101538a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2029
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: This is used to make users can specify
some options on the socket, e.g., the different priority for the socket.
While creating sockets, the priority needs to be set before connect()
and listen system calls, so better to add one parameter in spdk_sock_opts
which can contain options (e.g., priority) in spdk_sock_listen_ext and
spdk_sock_connect_ext functions.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I406238e9da7abd69f937b7072535a19124ed0169
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1874
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The IOAT docs are pretty limited so what's here just mirrors those.
More documentation on the library as well as the module will be
provided as an ongoing activity.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I28b13733f034fe117a4ea21983ce0418a427dd51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1925
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Deprecating INI tyle configuration has been a long time coming.
Feature parity is there between JSON-RPC and INI, which should
enable the switch.
All major applications support the JSON-RPC and tests were
moved to the JSON-RPC.
With above in place, it is time to give an explicit notification
to INI config users regarding the lack of support for INI.
In future release the INI configuration will be removed,
until then feedback from users is welcome on any
suggestions how to make the transition smoother.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If47375371791646f2afd06762b9bf6c5b8e009ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1941
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the related feature is already contained in
spdk_sock_listen and spdk_sock_connect functions,
we no longer need this function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1eafff0d139fa266a355fbee2bf0fc3947db69fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1876
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
New OCF version is ready, so update our submodule.
There were a lot of API changes so
we need to adjust our bdev/ocf and lib/ocf_env code.
Description of code changes:
- env: added small functions like ENV_BUILD_BUG_ON, env_vzalloc_flags
- env: added "destroy" method for all locks
- env: added "execution context" interface
- cache/core "id" field made private
- signature of "ocf_io_configure" changed
- "io->volume" field made private
List of changes to OCF is available at
https://github.com/Open-CAS/ocf/releases
But no new features were implemented for our
OCF module since 19.6
Change-Id: I1ac2b6db0aad2a9840e4fa73d65608c5638fcb23
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1801
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously the macro SN32_LT and SN32_GT had been added to iSCSI
library. But such comparisons may be used in other libraries.
So add two inline helper functions spdk_sn32_lt() and spdk_sn32_gt()
to include/spdk/util.h.
Add unit test for these functions. These functions are located in
header file but math.c is the place if they are located in source file.
Hence add unit test as the one for math.c.
The next patch replaces the macro SN32_LT and SN32_GT by
spdk_sn32_lt() and spdk_sn32_gt() in iSCSI library, respectively.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id3e4d80fea98ad4ae1516e27b9c9e8ec6f37e7a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1346
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The next patch will create poll group threads dynamically for
NVMe-oF target, and will need to wait for completion of poll group and
I/O channel destroy. This is a preparation for the next patch.
Add callback function and its argument to spdk_nvmf_poll_group_destroy(),
and to struct spdk_nvmf_poll_group, respectively.
The callback has not only cb_arg but also status as its parameters even
if the next patch always sets the status to zero. The reason is to follow
spdk_nvmf_tgt_destroy's callback and to process any case that the status
is nonzero in future.
spdk_nvmf_poll_group_destroy() sets the passed callback to the passed
poll group.
Then spdk_nvmf_tgt_destroy_poll_group() calls the held callback in the
end.
This change will ensure all pollers are being unregistered and
all I/O channels are being released.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb854066a5259a6029d55b88de358e3346c63f18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add transport_ack_timeout parameter to nvme controller opts.
This parameter allows to configure RDMA ACK timeout according
to the formula 4.096 * 2^(transport_ack_timeout) usec.
The parameter should be in range 0..31 where 0 means use
driver-specific default value.
Change-Id: I0c8a5a636aa9d816bda5c1ba58f56a00a585b060
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/502
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are synchronous security send/receive APIs defined in nvme.h,
however, we still need the asynchronous APIs so that we can make the
OPAL library can be used in asynchronous way. As the asynchronous APIs
are already defined in nvme_ctrlr_cmd.c, so just export them to public
APIs.
Change-Id: I5646f342a4bf70faad37daa956476f05a1327bcc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/675
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
MD026 Trailing punctuation in header
This rule is triggered on any header that has a
punctuation character as the last character in the line
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3ab4894092ef6b5f920d89b74e43c2e46e9581c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
MD022 Headers should be surrounded by blank lines
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I768324b00fc684c254aff6a85b93d9aed7a0cee5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If set, SPDK will continue loading the JSON config even if
some commands caused an error. This can be useful when loading
RPC config from spdk_tgt into e.g. bdevperf, which supports
only a subset of RPC commands and would usually fail with
"Method not found" message.
Resolves#840
Change-Id: I070fea862fd99e5882d870e11e6a28dc9d0c8ba6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"MD032 Lists should be surrounded by blank lines"
Fix this markdown linter error by inserting newlines or
adjusting text to list points using spaces.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I09e1f021b8e95e0c6c58c393d7ecc11ce61c3132
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Added spdk_vmd_fini(), which detaches all PCI devices acquired by the
VMD subsystem.
Fixes#1148
Change-Id: I43218ef5f9a764546b655c28688897fb91b779cb
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482852
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should probably be consistent about this going forward.
Change-Id: I6893ac991a0e506edad737db72986d82d6f1734e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This function is required for NVMf implementation
for compare and write fused command.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If41611f5c0b8e4ed8eec66f09858c724f1800d59
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477914
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new function for getting NVMe specific return code
for fused commands. Also changed one of the return codes
in fused commands so that we could distinguish error
cases.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I86417ea4f5b8f3e6496162be3d6c6128076e35d4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481666
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A new API was added `spdk_bdev_io_get_aux_buf` allowing the caller to request
an auxiliary buffer for its own private use. The API is used in the same manner that
`spdk_bdev_io_get_buf` is used and the length of the buffer is always the same as the
bdev_io primary buffer. 'spdk_bdev_io_put_aux_buf' is called to free the
auxiliary buffer.
The initial use case is crypto, in the next patch in series it is used. No UT were
added as the logic isn't that complicated and it is fully tested with each run
of crypto.
Fixed a comment typo also (not mine for once).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1939fcbc8e5db36fd909ef26771a725a551e8e6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478383
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is a spdk_nvmf_tgt_listen() which opens a port for specified
transport (trid) which opens possibility to accept new connections
from initiators. However there is no counterpart of this function
(i.e. spdk_nvmf_tgt_stop_listen()), which would stop listening.
Instead the current code relies on spdk_nvmf_subsystem_destroy()
to stop the listener, which seems to be wrong.
Fixes#1129
Change-Id: I6e73d8c234dc451f0fee8394132eae34cd4f4756
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479873
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This commit disables the custom identify handler by default.
The user has to explictly enable this handler via the set_nvmf_config
RPC or conf file.
Change-Id: I767816ba7639ebe78683993408ce6db02c7620fe
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479603
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This commit provides the capability to install a
custom admin command handler for NVMF.
It can be used to implement or replace NVMe admin commands that
are currently not handled by the NVMF subsystem.
The handler implementation is pretty generic and the handler function
has to figure out what to do with the command based on the bdevs
that are configured for the subsystem.
In cases where admin commands need to be forwarded to an NVMe bdev,
the commit provides functions that allow access to the underlying bdev.
There is an example handler in lib/nvmf/custom_cmd_hdlr.c.
Change-Id: I4f9d538c53669c176a836e8bdd379db0070a87dc
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <jacek.kalwas@intel.com>
Purpose: With this patch,
(1)We can support using different sock implementations in
one application together.
(2)For one IP address managed by kernel, we can use different method
to listen/connect, e.g., posix, or uring. With this patch, we can
designate the specified sock implementation if impl_name is not NULL
and valid. Otherwise, spdk_sock_listen/connect will try to use the sock
implementations in the list by order if impl_name is NULL.
Without this patch, the app will always use the same type of sock implementation
if the order is fixed. For example, if we have posix and uring together,
the first one will always be uring.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic49563f5025085471d356798e522ff7ab748f586
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478140
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Flash translation layer library interfaces updates
related with witch switch to bdev_zone API.
Change-Id: I0a6cc58b7b526ea6de7bc3f324806429659fa9bc
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481591
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We already support in rpc and we also need the support in conf
file.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic0d64c48c21954d913ef7345ce35a767e8e285bd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_reactor_enable_framework_monitor_context_switch and
spdk_reactor_framework_monitor_context_switch_enabled had been
a little long and not easy to get the meaning.
spdk_framework_enable_context_switch_monitor and
spdk_framework_context_switch_monitor_enabled will be a little
more concise, and hence change the names accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f1d50e8b62846cbd0f91b94f94cbaf16fefa39b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add an new RPC `framework_get_reactors` to retrieve list of all
reactors. Running threads on each reactor are included
in the output. Update jsonrpc.md and CHANGELOG accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I985d087dd41afe3033b7678af141ec8e5a2a822e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
RDMA work requests generated between two calls to NVMe RDMA QP
processing function are chained into a list and then posted together
to a queue in next call to processing function.
Batching improves performance in scenarios with deep queues and heavy
load on CPU. But it may cause latency increase on smaller
loads. Batching is configurable with RPC methods and configuration file.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I600bce78427eb7e8ed819bbbe523ad318e2da32b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462585
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Three patches from 19.08.1..19.08.2 that include:
vhost: fix possible denial of service by leaking FDs
vhost: fix possible denial of service on SET_VRING_NUM
vhost: fix vring requests validation broken if no FD
First two are resolution to CVE-2019-14818.
Change-Id: I67cd3ea4cddf9413b318957c28635b08c3b3c4b2
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add spdk_sock_writev_async for performing asynchronous writes to
sockets. The user of this call is responsible for allocating their own
spdk_sock_request structures to pass to this call.
spdk_sock_writev_async will not return EAGAIN and will instead leave the
requests queued until they are fully sent or aborted due to socket
error.
Change-Id: Idf3239e65d26a3024e578122c23e4fb8f95e241b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
'delay_pcie_doorbel' parameter in 'spdk_nvme_io_qpair_opts' structure
was renamed to 'delay_cmd_submit' to make it suitable for every
transport. Old name is also kept for backward compatibility.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I09ef8028133c4a3d4a5bbc5329ced1f065bcaa46
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
When dealing with sockets most code in SPDK buffers
data into large chunks to minimize the number of
syscalls made. The pipe utility is designed to make
that easy.
Change-Id: Ie29966712bbfb43fb49457e042903cf45864e6c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465707
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In addition to x86, enable isa-l by default on aarch64.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: I2db3f248bdc857326ec9b6f4b040a95d2a2ca1ca
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This RPC method can be used to set cache size of
blobfs, in case a smaller or larger memory scale
is requred by cache pool.
Change-Id: I8046c7caeaa15c67825f86d14ae0b79395d51daf
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471870
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since g_fs_cache_size only takes effect when creating
g_cache_pool, so spdk_fs_set_cache_size is only
permitted when cache pool is already freed or hasn't
been initialized.
Add a return value to indicate the result
of spdk_fs_set_cache_size.
Change-Id: I3828b136976d6f03f0751b2f20f68cd47c36ec04
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471869
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This at least allows the caller to know there was a
problem, and that the messages wasn't actually sent.
SPDK by default creates huge rings so this problem
should never occur, but out-of-tree use cases may
send messages much more often and require at least
a notification when it fails.
While here, change the thread check to an assert.
There's no need to work around someone calling
this function with a null thread parameter.
Fixes issue #811.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie6d432d616be45c7a4232aff1548cef198702bc0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added info on new names of RPC.
Moved rest of the RPC section to the top to acompany it.
Change-Id: I3ee265ab2f163d0bf01b74ca87d4510835041c3a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The ISA-L integrated in SPDK doesn't include aarch64's implementation/
optimization in pass 6 months, upgrade it to achieve better performance
on aarch64. The upgrade includes the commit f3993f5c0(crc: Fix dynamic
relocation link failure on Arm), without which there will be link errors
on aarch64. That's the reason for not upgrading to the latest released
version of ISA-L(2.28.0).
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Ifbf2a3ccc3f88689e6ea11ab30fa7a771b13b5ec
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472762
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added couple missing entries after comparing changes in public
headers in SPDK.
While here, added backticks around functions
to improve readability in MD.
Change-Id: I3c723a2e76dc02a84e8277e0bd8db96f10ba2222
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There were couple sections that were duplicated, so they
are now consolidated.
Moved around sections so that relevant ones are closer
to each other.
No change in content of section/entry was done in this patch.
Change-Id: I1838d9057548c5f65f7304f783ee81e21d3b624c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change allows setting of the NVMe completion queue
CDW0 in spdk_bdev_io_complete_nvme_status.
Before that change, handling of vendor specific NVMe IO
commands was limited since there wasn't a way to return
command specific info back to the initiator.
Change-Id: I250d5df3bd1e62ddb89a011503d42bd4c8390f9b
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470678
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This path updates ocf library to version 19.06 and also introduces
all necessary changes required to integrate ocf bdev adapter with
new version of ocf.
Summary of changes introduces with new OCF in ocf bdev:
- ocf_env.h increased limit for memory operations, changed behaviour
of strncpy to less restrictive, both changes are required to run new OCF
- ctx.c changed functions to new from new OCF
- added new cache mode "write only"
- added missed cache modes wa and wi to RPC scripts
- rewritten spdk_rpc_bdev_ocf_get_stats function to use asynhronus
ocf_mngt_cache_read_lock
- used new asynhronus ocf_mngt_cache_flush instead of waiting for request
- removed no longer valid filed - cfg->device.min_free_ram
- changed expected result in metadata_probe_cb
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: I83e4335e16600e4d22e6bb517931102de42d39e9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468132
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It can be useful for passing additional information about nvmf
target to a handler for new nvmf connections. Context can be
stored in globals as it is currently done in nvmf code. However
in case of multiple targets or languages where accessing global
state is challenging (i.e. Rust), this becomes inconvenient.
Change-Id: Ia6a2fdba4601531822b3e5fda7ac5ab89d46f6c5
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469263
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
This RPC method will mount blobfs on bdev to one host
path through FUSE. Then on the host path, user can
directly do some file operations which will be mapped
to blobfs.
Note:
* The FUSE mount of blobfs can be umounted directly by
SHELL umount or fusermount command.
Change-Id: I7c322d978b39bbc7255fced345a749ad5bfa7077
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
FUSE operations in blobfs_fuse.c are extracted from
test/blobfs/fuse/fuse.c to blobfs_fuse.c in module blobfs_bdev.
And it is extended to create one new thread dedicatedly for one
FUSE mountpoint to handle FUSE requests by blobfs sync API.
spdk_blobfs_bdev_mount is implemented as the export API. So
related code can be utilized by other modules/apps.
Now test/blobfs/fuse/fuse.c is much simplified with function
spdk_blobfs_bdev_mount.
Change-Id: Iefa16977fabbae2008c8f65fe1b69d650b6fd18d
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
blobfs_bdev module may contain functions related to
FUSE which will utilize libfuse3.
By default, it is diabled to compile blobfs_bdev module
with FUSE related functions. Running './configure' with
option '--with-fuse' can enable it.
Change-Id: I6552a6c04cc3412c739691630a7a481e0ae6b59c
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Following test/blobfs/mkfs case, add it as one RPC
method to let build a new blobfs on given block
device.
Change-Id: I0ffbb1add95dfbc8655e0238ed6f3cd519dd945b
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add module blobfs_bdev as a general module to simplify
the operations of blobfs on bdev. Then its functions
can be utilized by other libraries or apps.
blobfs_detect can be used to detect whether there is
one blobfs on given bdev.
Change-Id: Ib425574816061dc945fb652b539f791a44097a43
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Zoned bdev properties were added to the result of the get_bdevs RPC
call:
- zoned: indicates whether the device is zoned or a regular
block device
- zone_size: number of blocks in a single zone
- max_open_zones: maximum number of open zones
- optimal_open_zones: optimal number of open zones
The "zoned" field is a boolean and is always present, while the rest is
only available for zoned bdevs.
Change-Id: Ib82b39d4ab20543d0a754dbc4c0317885fb831d1
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467144
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new RPC iscsi_portal_group_set_auth. This RPC overwrites
the setting of CHAP authentication for discovery sessions by the
global parameters specific for the portal group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I01578b2d01e3dbed599db10340d5053fb0a3738d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9fb7a998f7c13ce53cba630a895e8e11cf5f4a1c
Signed-off-by: Benjamin Saunders <bsaunders@google.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467559
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also update the changelog for the previous few changes.
Change-Id: I79ac330b4992ccc3e41fd1643b09128c6de6c86d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added write_unit_size field to bdev structure.
It describes required number of logical blocks
for write operation. For legacy bdevs this value
will be equal to logical block size.
For bdevs working on top of Open Channel/Zoned
Namespace SSDs or RAID 5 volumes write size unit
could be greater than logical block size and
upper layer should perform write operations
with size of multiple of write unit size.
Change-Id: I55eb6687912a7d0d1157874b2778e7d6c2d44e37
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Weighted Round Robin can be enabled for users, and users
can allocate different priority IO queues for different
purpose. For now we will enable this feature in the
NVMe driver first, following patches will enable this
feature in bdev layer.
Change-Id: I0f799236ca04eb85ef3c9f972ed63ff2718563ba
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New interface for create spdk_bs_dev from bdev desc.
This change, together with spdk_bdev_open_ext, can
remove the race condition where user gets the bdev
structure, but bdev is removed after getting that
structure and before spdk_bdev_create_bs_dev function
is called.
Change-Id: Ia80c3527ff91b45f97f44d295a5cb6d83f5ee0e4
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This change adds return code to spdk_subsystem_init().
Making it's caller responsible for handling application
state - such as calling spdk_app_stop().
This change implies that start_subsystem_init RPC does not
stop the application on failure, only reports back the error.
Renamed g_app_start/stop variables to now more relevant
g_subsystem_start/stop.
Change-Id: I66a7da6ecfb234a569c65279cc4b210ddac53d2a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds new interface for opening bdev and
implements new style remove event. With that changes
user can be notified about different types of events
that occur in regards to bdev. spdk_bdev_open_ext
function uses bdev name as an argument instead of bdev
structure to remove race condition where user gets
the bdev structure and bdev is removed after getting
that structure and before open function is called.
spdk_bdev_open is now deprecated.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I44ebeb988bc6a2f441fc6a0c38a30668aad999ad
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
