By supporting the management based on linked list for PG and IG
the group state of PG and IG are no longer necessary.
Change-Id: I249424cacd2d27dda4e4cb2182442d0d1e9bfb8e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/388863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Current fixed sized array for iSCSI target is not thread safe.
When newly created targets are inserted into the array, multiple
targets may be inserted into the same position. Linked list is
better than fixed size array to support dynamic reconfiguration.
Change-Id: I4db5a3ec16844db06e0cfcd2aef1f97952f15afa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The results of access control procedure for login in the
spdk_iscsi_tgt_node_access() is defined in the following table:
+------------------------------+
|iscsi name |netmask |result |
+------------------------------+
+------------------------------+
|denied |- |denied |
+------------------------------+
|allowed |allowed |allowed |
+------------------------------+
|allowed |denied |next IG |
+------------------------------+
|not found |- |next IG |
+------------------------------+
However current implementation have redundant repetition in the
spdk_iscsi_tgt_node_access() and the above definition is not
visible. Hence refactor spdk_iscsi_tgt_node_access().
Besides refactor spdk_iscsi_tgt_node_allow_iscsi_name() because
it has redundant repetition too.
Add UT code for these changes.
Change-Id: If06d87c1246c85439ee0482149bd887a7b53b169
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379935
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Naming rule of access control of iSCSI target does not reveal its
intention. Hence change it before refactoring to avoid unnecessary
repeated procedure.
Change-Id: I4064ec0a5a2b52244b6de3958ee2ab41342d1a57
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381248
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the accessibility control of iSCSI target, "ALL" is used to allow
ANY IP address-port pair or iSCSI name of initiators. However iSCSI
targets cannot know ALL initiators beforehand.
Hence "ANY" will be better than "ALL" and will avoid misunderstanding.
Comments and iscsi_tgt test code are also changed and UT code is added.
Change-Id: Id004d819df6e9ee89f6c1db2e4b4c149be062733
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385168
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Althrough the two functions are empty now, but they are not
vhost_scsi specific.
Change-Id: I331a455374f7dd92fd76cab255a43072baceb0dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/389477
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the existing bdev_null_destruct() function instead of open-coding
the bdev cleanup; the bdev_null_finish() path neglected to free the bdev
name.
Change-Id: Ie74be39b0475674f70c3999bbe2f21caab2e2e20
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389867
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As of this patch, it is unused.
Change-Id: I15f42b8cc43e3792ae69c91f3911b7853d5b5664
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It has all the same properties of uniqueness, so
implement it as an io_channel to take advantage
of the other infrastructure for message passing
already available.
Change-Id: I1777b91f0597a5a43ac0d0bbfdf878e874eb04f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388291
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This correctly puts all of the I/O channels on the right
thread during shutdown.
Change-Id: I432c8cb981a68b40639f8876dae42597a9e6a85f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389637
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When device was reinitialized, the old
virtqueue memory used to leak. While
here, also added a doc for virtio_dev_init.
Change-Id: I9bb8dbfa5d68deeb73e71567a7e51b82f869537a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388297
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The vbdev_* functions that were declared in lvol.h are all internal to
the lvol vbdev implementation; they don't need to be in the public
header.
vbdev_get_lvs_bdev_by_lvs() is moved to the top of the file so it
doesn't need a forward declaration (no code change).
Change-Id: I98282d3cb0008da5c5b5059eee335219dc929f1c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modify the vbdev_get_lvol_store_by_uuid() API function to take the UUID
as a string instead of a uuid_t, since this simplifies the calling code.
This also allows us to remove #include <uuid/uuid.h> from the public
API, giving us the freedom to change the underlying UUID implementation
later if necessary without breaking API.
Change-Id: Ib360281f384f95722c5ab64e75dcf3603f826e4c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All of the call sites already have a lvs pointer; there's no need to
look up the lvs by UUID again.
Change-Id: Icef54d84e7c89f682ea47f10b282839ab4237ce0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The array of message strings is now only used in vhost_user.c, so it
doesn't need to be exported.
Change-Id: I40163b95a52a1762eb3639db5553814bf1299959
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389652
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The bdev module get_ctx_size callback is only necessary if it returns a
non-zero size.
Change-Id: I00ca366b8a1949bdb091c5e8aefb19cb606481d0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rather than iterating over the g_nvme_bdevs list to determine if a bdev
is an NVMe bdev, we can just compare the module pointer.
Also, the function can take a spdk_bdev pointer directly rather than
casting from a void pointer.
Change-Id: Iccf3c9b3263e9b2d67d07d037dc00d1cbc0f22a1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389899
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch will make sure the nvme bdev work in correct way when we delete
bdev by using rpc method and then exit the app.
Change-Id: I19172440d46d96c7396282e1bef07d98ab601390
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/389930
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
replace the bdev_nvme_destruct() with spdk_bdev_unregister(),
clean all the resource in the bdev layer.
Change-Id: Ic4b85dee6225f42babe868796a8c24dec5c22af6
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/389855
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Currently SPDK NVMeoF will allocate data buffer from mempool, however,
some data buffers may not block size aligned, this is okay for NVMe
backend but will fail for AIO backend. 4KiB aligned data buffers
should be okay for most AIO backends.
Change-Id: If7b9c2962d716addbd755e80e59620377f2ba488
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/389245
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The 'm' variable was only used in sizeof expressions; m was a struct
vhost_user_msg, and we already have one of those called 'msg' in the
function where it was needed.
A previous commit removed a RTE_USED() marking on m, which introduced a
warning on clang, since it can now see that m is unused.
Fixes: 73bfcede86 ("rte_virtio: remove rte_memzone from vq")
Change-Id: I63eb0d82c7c750b4181b6312bbda82ef3213c205
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389648
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Also removed vdev->started field.
Used vdev->status field to determine
if a device has been `started`.
This is simply a cleanup.
Change-Id: Ieb06b03b3bd60bd5906b41c987c418604906c913
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388296
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now that vtpci_internal has been removed,
the vdev->id and g_ctrlr_counter are
obsolete and can be removed as well.
Change-Id: Ia1e83cdc81552173f4b57283f83c5791e2b90daa
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388301
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Removed another direct DPDK dependency.
Change-Id: I12d9a49fb16fbefad42c09f46c280f6f7be094d1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388300
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Use standard spdk_dma_malloc instead.
This removes another direct DPDK
dependency. Yet, for multi-process
support we will more likely use a
memzone for the entire virtio device,
not it's virtqueues.
Change-Id: I57119ad830b573b718605b46cc3099b105651ee9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385629
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Replaced them with spdk alternatives.
While here, also clarified the documentation
for virtio_*mb.
Change-Id: Ia604e9abd8eadc18fa3ea1a782e29e7da6b3c162
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385627
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Currently there are a bunch of asserts() on metadata
descriptors - change these to fail the blob parsing
instead.
While here also return -ENOMEM if any of the memory
allocations fail.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie37b73c57b304d05a45d10a8d33bcc1d47e7a1be
Reviewed-on: https://review.gerrithub.io/388702
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
data_ro means that write, write_zeroes and unmap operations are not
allowed.
md_ro means that resize, set_xattr and remove_xattr are not
allowed.
There is no code yet that can activate this - it is coming in a future
patch. Two usages are planned though:
1) a user explicitly marks a blob as read-only - this is persisted so that
future loads of the blob will ensure the blob cannot be modified - neither
metadata nor data
2) a future feature flag framework (how's that for alliteration) may allow
a blob to be opened, but not allow metadata modifications, if there are
feature flags set in the blob's or blobstore's metadata that the
application does not understand
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I247fd900430c56f7176edfb80dddd5a1a6c8dc87
Reviewed-on: https://review.gerrithub.io/388663
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There are two ways to set stockets to nonblocking type:
- ioctl with FIONBIO
- fcntl with O_NONBLOCK
Those two should be equivalent for sockets used in SPDK.
During testing it was shown that VPP interprets only
the second type, so this patch changes all occurences of it.
When here, more descriptive error logs were set in case of
failure.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifa5b30e3a4fa04fe23f41fa2ae9dab4b01dd7d3c
Reviewed-on: https://review.gerrithub.io/388816
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Moved some vq-related functions
to virtio.c. It's the only place
they're used in.
This patch also removes the
virtqueue_full() function. It's
not used anywhere.
Note: all the functions content
has been moved 1:1.
Change-Id: Ib854fc0836378e6955c0a7358ecabcf2c3107d06
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385628
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Only multi-process shared controllers should be inserted into the shared
list in g_spdk_nvme_driver. To accomplish this, create a second
per-process global list of attached controllers (g_nvme_attached_ctrlrs)
and rename the driver struct field to shared_attached_ctrlrs to clarify
its purpose. Additionally, a new helper function, nvme_ctrlr_shared(),
returns whether a given controller should be on the shared or
per-process list.
Change-Id: I46d4e558ece8b7fc3d28868e32bb56d794f21aab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389190
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Simplify the PCIe transport by using an existing function to look up a
controller by transport ID.
Change-Id: I261865df1ba23069b052ca64944b7637d70c85ba
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388701
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each process should manage its own list of controllers that are
initializing; the list doesn't need to be shared between processes.
This is the first step toward preventing non-PCI controllers from being
added into the shared attached_ctrlrs list.
Change-Id: Ia6f85fe89e28a04f0950da5362bb2f49d1b76da9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the user calls spdk_rpc_close() multiple times, there would be a
double free. This is not normally possible when using the SPDK event
framework RPC subsystem, since it will only call spdk_rpc_close() once,
but it doesn't hurt to make the RPC library public API handle this case.
Fixes GitHub issue #219.
Change-Id: I80cff0ed871dec6b90bd2658e85b0cd0914b6ada
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389394
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change the return type of spdk_bdev_register related
functions and try to handle the duplicated name
issue.
Change-Id: I23af11583cf2050579d1624508306a35394bffde
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/388178
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the new one from io_channel.h.
Change-Id: I7bf6729caf6eeebcb58450a36119601957ad5da4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388290
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This function will send a message to each allocated
thread asynchronously, then call a callback on
the originating thread.
Change-Id: I3ebe7c6c5b460a944a32487d1091b601a482a256
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388041
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This simplifies the public API and requirements for
user applications.
Change-Id: Ibb0d25a7838a0fa683f39e79cb4fef78adf6aee8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388040
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Using pthead_detach to let system take back the resources owned
by SPDK created thread for nbd kernel module.
Change-Id: I39f3c0b60ecf57f3227a7b4733a0f144a6e169c5
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/388722
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Make this generic and not directly dependent on
the event framework. That way our libraries can
register pollers without adding a dependency.
Change-Id: I7ad7a7ddc131596ca1791a7b0f43dabfda050f5f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387690
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id0f7751d8889584fff1a947160ee89e2f158af1c
Reviewed-on: https://review.gerrithub.io/388943
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With configuration where there are nested lvol stores we
encounter situation when hotremove and fini functions try
to unload the same lvol store second time (previous unloading
have not finished yet).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Icb5d430d17024fbda0e6113b380d8f346a3e9a84
Reviewed-on: https://review.gerrithub.io/388790
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It doesn't need to be accessed outside of bdev.c.
Change-Id: Ib1a1abe88b0993e391e0a39c5483781b2c0ad523
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388508
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
