Introduced a new variable to run functional tests.
It's enabled by default, and can be manually disabled
on systems where e.g. only unit tests are run.
SPDK_RUN_FUNCTIONAL_TEST is a supplement to SPDK_UNITTEST.
The two are completely independent - both can be enabled,
disabled, or run in any combination.
The new variable is prefixed SPDK_RUN_ as it aligns nicely
with SPDK_RUN_CHECK_FORMAT, SPDK_RUN_VALGRIND, and
SPDK_RUN_ASAN, all of which control how much is tested.
SPDK_UNITTEST should eventually follow the same pattern
as well.
This gives us 2 layers of configuration:
SPDK_TEST_* <- what is tested
SPDK_RUN_* <- how it is tested
The following would run UT+ASAN for FTL and BlobFS, without
running their functional tests:
```
SPDK_RUN_FUNCTIONAL_TEST=0
SPDK_RUN_ASAN=1
SPDK_TEST_UNITTEST=1
SPDK_TEST_FTL=1
SPDK_TEST_BLOBFS=1
```
Change-Id: I9e592fa41aa2df8e246eca2bb9161b6da6832130
Signed-off-by: Seth Howell <seth.howell@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442327
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch introduces functional tests for FTL bdev.
The tests cover various I/O workflows and check data integrity. Several
scripts have been added to test the FTL library:
* generate_config.sh - prepares configuration scripts for specified
device
* restore.sh - tests restoring device's state from the SSD
* fio.sh - runs tests based on fio and fio_plugin
The tests are run from autotest.sh when the SPDK_TEST_BDEV_FTL flag is
set.
Change-Id: I561d99ed35fe91eadd3756789cc99afe2da8c1db
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431330
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Two fio instancess will try to do simultaneous I/O
to a single vhost block device.
The test uses default_initiator.job as a fio config,
which apparently wasn't used anywhere and had to be
slightly adjusted to work. Specificaly, we had to
specify an empty job in the config file, as specifying
it from the command line wouldn't make it inherit
any options from the [global] section in the file.
Change-Id: I2c2a96a709c567f5c910715a5b3d85a4e28bcb97
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/419066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add SPDK_TEST_CAS suite
Add basic integrity test with multithread-multidevice fio with cache
modes WT and PT
Change-Id: If2916558894d9f7efd9628eb99f7338c90b312b1
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Added set_read_only_lvol_bdev() RPC that marks
lvol bdev as read only.
This enables to create clones off of a base lvol,
without having to create additional lvol bdev with snapshot.
Change-Id: Ic20bbcd8fbebcef157acce44bfa1da035b0da459
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch rework all JSON config file reading tests. This is needed as
current approach will require to modify each test to re-launch SPDK
applications for each test type. This is hard to do because tests are
not flexible and will require to be rewritten almost from scratch. Not
metioning time to relaunch each test separatly.
Instead, just replace all old tests with one test. Launch only one
target and only one initiator. Then configure it using RPC calls. Then
config is dumped and target and initiator application is relaunched to
reread the configuration from file. Then config is dumped again and
compared.
Change-Id: Id857089aed0e6f2197cbf3ae625a4e9f4b13e8bb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/432318
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Keep run_test inside a designated file instead of
calling them directly in autotest.sh
In similar way how nvmf and iscsi scripts are composed.
Change-Id: I19f70678a85b5764d34808f8f7a9e735556474f9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
hotplug.sh skipped in NIGHTLY test for no VM image.
We disable the case temporarily before finding the
missing VM image.
Change-Id: I43afdaa647a85c8fc2c846f79b26885fd541b3f8
Signed-off-by: WangHaiLiang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/431097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
remove from the list test cases from rocksdb.sh
add vhost live migration tc1 and tc2
Change-Id: I2e7beff62e9c54ea86481832c29c613357e19c99
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/429480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Some tests intermittently fail due to leftover lvols
from previous runs:
$ hello_bdev -b Nvme0n1
*ERROR*: Could not open Nvme0n1 - lvol module already claimed it
Fix this by zeroing the first 1MB of each NVMe at the
start of autotest. That will remove the lvolstore, and
will get also rid of any GPT partitions - that's why
this patch also removes the explicit `parted` calls that
would try to do the same.
Since there's no way to do direct I/O with the standard
dd shipped in FreeBSD, we do the `sync` after the normal,
buffered dd.
Change-Id: I18a01bda064f836901327f1dd3cfab1f08e87b1a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/435086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This helps avoid issues with nbd not being ready when
we need it.
Still keep various "modprobe nbd" in different test
files - this ensures these test files can still be
run in isolation. But remove the various "rmmod nbd"
to ensure that nbd always stays loaded. There is no
harm in just keeping nbd loaded all the time.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3597ff1f7ac53162c33a0384a33f33776cf6f182
Reviewed-on: https://review.gerrithub.io/434838
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The timing flags in virtio.sh were configured improperly and were
preventing the timing graph from generating. Also, the vhost initiator
tests should be reported under the same timing flag.
Change-Id: I2a4b755ba98c2064e64e38609936d2f5144464cb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This script should be called when testing the crypto module. It will
configure any qat cards with class code 37c8 for use with the spdk
crypto bdev module.
Change-Id: I233069fbe9ba3c7a6463f52443234f9fe2c9a1f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/428549
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's a C libary for client to call rpc method.
Change-Id: I5378747bd9dab83a41801225ba794b3910d1f5a5
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424061
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Test to create and delete full configuration for iscsi node.
Change-Id: I1c09741bf5afcc7cf9ce58c08973439088ea3ba4
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/425179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Boot os from a vhost controller using lvol bdev on a device with
512B block size. It performs fio integrity test.
Change-Id: Ic30a5dc33d9dd072559d9101f31e22e9e96862a7
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I77cf0b8d64c1bfa050d61440472ff65821673b39
Reviewed-on: https://review.gerrithub.io/423999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new script to enable converting
old INI config files to the new JSON-RPC
config file format.
This prepares for deprecating the INI
config file file format in the future.
Change-Id: I0f2bfa9a585ce3537772b662d8e4028ab08a554d
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/420457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
1.Refactor the run_test function which used to add detailed information
during run test suites and test cases.
2.Refactor the lvol feature test scripts to make sure their log is the same.
3.Users can use "run_test suite command" to run test suites
and use "run_test case command" to run test cases.
4.Update the vhost and lvol test as example.
Change-Id: I7b6387019a861bd1c4f89b9a7712e53150aea8fa
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/403610
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new test case 702 for tasting lvol stores, similar to tc700
but with different lvol store cluster sizes.
Change-Id: Id33fc6ff9520ed21219f49f161bd41c4f6b71848
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/420758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As requested in GitHub issue #361, we should have a way to control
whether the SPDK-patched nvme-cli tests are executed.
Also add a report_test_completion call for the NVMe-oF nvme-cli test
so we can easily track whether it executed (the local PCIe nvme-cli
test already had a completion).
Change-Id: I70c26bcf2489ccfa563214a9723603aa705be7ab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418866
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Meneghini <johnm@netapp.com>
Reviewed-by: <ed.rodriguez@netapp.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
- load spdk_tgt with bdevs
- check if json config is properly saved and loaded
- check if all bdevs are properly loaded
- check if configuration of spdk_tgt is properly set
Change-Id: I89226bc9c05880e73523fb189116e7433a513244
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/406326
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Type of net framework is now passed throughout the iSCSI tests.
This is in preparation for running VPP tests alongside the ones
on posix.
Change-Id: Ifb25a9e4b04512de882883278b8bb465de579828
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/408879
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Vhost-blk readonly "config-ro" option was
removed from Qemu arguments after merging
pull request f67c9b693a into Qemu master.
"config-ro" Qemu option needs to be removed
from scripts in order for tests to pass.
Nightly test for read-only feature has to be
commented out until Qemu is updated on test
servers.
Change-Id: I0cdc9c2fd3b23ef77a63b54e280e1bb9500229ee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/413745
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The contigmem driver is built with dpdk and frequently updated. We
should copy this driver each time we build dpdk in order to maintain
support for FreeBSD
kldload checks the sysctl variable kern.module_path when deciding which
modules to load. Since the values stored in this variable are not
determined by our program, I chose to copy the module to both common
directories for kernel modules in FreeBSD.
Change-Id: I2d439a9cbac5bebb79e6ee48bec47409bb215be9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/409250
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The QEMU vhost-user-blk-pci host driver will not negotiate
VIRTIO_BLK_F_RO feature bit by default, users must append
`config-ro=true` to enable it if the backend device can
support read only feature.
Fix the issue #254.
Change-Id: I17dcc1b80bde094dd4873221b681d0c4049abb39
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/408266
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Ceph monitor IP address was always 127.0.0.1, with this change
it can be configured at setup time.
Since each test might prefer to specify different addresses
or ones that do not exist at start of autotest.sh. rbd_setup was
moved to begining of each test respectively.
Change-Id: I5626f7ea979d0db921208355ba23314cf48e971f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/407910
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ibaaddcb34bd9a4528cf655a979c9fd91dde99856
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/407791
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Also move snapshot and clone test plan into implementation.
Change-Id: Ifa1f2da651305747ae24c50921deebd0266c5888
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/392371
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enable test functions for lvol resize.
Change-Id: Ia4583af211350054797d2d8441083e582e6e2ab7
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/395043
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVML (Non Volatile Memory Library) changed its name to
PMDK (Persistent Memory Development Kit), so make the
necessary changes to the SPDK repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id07a87eafb4e9a3099603030c58c0e927bafa608
Reviewed-on: https://review.gerrithub.io/406256
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
