Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1a4d32de6a83800cdcd65dde3895a36731c52838
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9710
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ia858a47e51a6ef4a0fba1dc1e68d314b27e20342
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9276
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Do not print ETA output. This pollutes logs when long
benchmark tests are run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0dfe30fdd727decb4d81be6b530e675bc1f4518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add option to enable gathering BPF traces while
running the test.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9ea317a37c3638def40a525eca06f2d8325a74c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8644
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add exceptions to results parsing and fio run functions
to better inform what's the cause of the failure.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I94e51cb8f77515f7d26a75501011d6111820ae56
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Enable "kernel_engine" option for Kernel Initiator
class to enable ability to use io_uring engine on
initiator side.
For NVMe-oF this has limitations as apparently it's
not possible to enable polling on the initiator side,
which in turn makes fio "hipri" option also not
possible to use.
Adding #TODO sections with notes in case this is
later fixed in Kernel NVMe driver.
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I31da52946692015237263abc77d8425b5eae5b98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie46df6e4f52b59941a90eeb786954fe7d5f1d089
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8040
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvmf_subsystem_add_listener() in rpc/nvmf was modified
by 64debe0453 and the
change was not reflected in performance scripts.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I7bb8c39ab225421964e37883aa7b0f824e8df683
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Added 'rate_iops' FIO option to the performance scripts.
This will be used during tests where limiting factor
has to be artifically imposed, rather than come from
the target/initiator system or enviroment.
One case for this are scheduler tests, to limit
each connection and balance the threads accordingly.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I10bb09be9205a8b7ba90b36cd4e0bf922b0ecbc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7840
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I9b9f8c9e407425fdab1e84050354481ad76c19c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Rename to target_nic_ip to better match NVMe-oF
terminology.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0644410cfb063eeea740c54f5860aeefdb52d52d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7089
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK directory needs to be copied to initiator systems
earlier for set_irq_affinity to run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0f9ade02e58c9224e0b2ddc75117baaf653be614
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6776
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Need more investigating how to properly enable ADQ
for Kernel mode. Do not run Kernel + ADQ configuration
for now.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I700ef417b9b398c067a586a1a5ad9947a92057ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6566
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Readme was frequently missed when adding new stuff or
updating the performance script, and it is out of date.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1710473be576ffbcc2fa8e3701b196bd46cf6654
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6538
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create a default traffic class (tc0) with minimum
needed number of assigned threads and a priority class
(tc1) with number of assigned threads equal to
number of application threads.
Finally run set_xps_rxqs to configure symmertic queues.
set_xps_rxqs script used from Intel ICE driver
package available at:
https://downloadcenter.intel.com/download/29746/
Intel-Network-Adapter-Driver-for-E810-Series-Devices-under-Linux-
Change-Id: Ie0f2db266621a9dabb1621344bfdc5fa64fee03c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
There are multiple cases for counting number of CPU threads
on Initiator side. Keep track of num_cores in all of them.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4b8d1d79a2aa17706d206b149c1c8e8816ae2ef5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Set busy_poll to 0 for non-ADQ. Having it enabled with
this value results is huge latency increase.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ic68ed2b7dc19b8d4b274ce8622194489693863cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7480
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
num_cores name was misleading, as the parameter actually
contained core mask (or core list). Create separate
class attributes with core mask and number of cores.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ibfae7770aea2f2c1c720abf567400deb50028ab4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6535
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Save info about subsystems created subsystems (target
side) and remote subsystems (initiator side) into
a list.
Change-Id: I7ec1c6a4d1f75060b69b68e0b8e0dd61789fc9e0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6374
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Run set_irq_affinity script after irqbalance service
is disabled and manually tune IRQs to be run only on
the CPUs local to NIC NUMA node.
set_irq_affinit.sh script must be manually downloaded
as part of https://github.com/Mellanox/mlnx-tools/tree/master/ofed_scripts
package before running tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I67b3c851bcf283caea29ad36f6d4bc0322ca0d27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
In performance tests always use best performance policy.
Previously this was manually managed on test systems,
but it's better to do this automatically every time.
Change-Id: Iff81863cf8d9cc713a3c4cce1d8edf7ebbf81c84
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Modify CPU power management settings to achieve high,
consistent results.
Change-Id: I3602ae7523c5b83878238928caaeb453f7d2533e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6372
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tune sysctl parameters for TCP testing. Restore previous
settings after tests have finished. For ADQ-enabled tests
also set proper value for busy_read option.
Commit includes a fix to initiator exec_cmd() method to
allow using command parameters which contains whitespace,
otherwise it's not possible to set some of sysctl params.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3376b69b8d7c0d8a282765db4fe55824f55f9e05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Disable all unnecessary services which might affect
tests performance.
Managing services implemented in a very simplified way
usign subprocess and configparser modules (because json
output is not available). Proper implementation would
need to use a proper dBus API, but this seems like an
overkill for such a script.
Change-Id: I72feec4293b77442a9d2c9b4afaa032df1c4d5e1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Configure NIC settings as per ADQ configuration guide.
Change-Id: I957aada267474c2a1448c89a1b7c81d4dd261ca6
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6263
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If2784b74ece6c48b81cc53e63412cd2bc618ffef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6262
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use common method name and parameters for calling
subprocesses for local (Target) and remote systems
(Initiators) instead of using "check_output" (from
subprocess module) and "exec_command" (from paramiko)
separately.
Having these functions wrapped by a single common
method will allow to create common methods in Server
class more eaisly, instead of creating two copies in
Target and Initiator classes.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1c10f6a88f3d7300c227e969ad6fd901763ac52c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Parse the config file for "adq_enable" flag and enable
the option in SPDK Target and SPDK Initiator configuration.
At this point the flag has no effect on the generated
traffic, as the system and priority queues are not
configured properly. These settings will be added
gradually in following patches.
Change-Id: I5d7bc892f3aa7bbe691b7e0983294b56fcf994f5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6260
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Get detailed info about NICs installed in servers. This
is using lshw utility to make things easier and not
implement the whole logic for parsing /sys objects and
pci.ids listing in system.
Change-Id: I97871fdc9feaae1c2485574a7b488b88ac3afc4f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
The number of options for test execution grew high,
and we still need to add more. This results in a lot
of parameters to pass around in constructors, which
is hard to read and causes pylint to complain.
Instead of passing each option individually as a
separate parameter, pass them as dictionaries just
like they're defined in .json config file. This
makes managing the default values a bit harder, but
is more readable.
Change-Id: I5d88a2b7fe51d2df93edd9130678a937d34facdd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Interface names will later be needed for additional
test options.
Change-Id: Ic16d305a97087ab1fdc35d5fd5a3d1ed2a021d90
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6206
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
So far the information about remote target IP addresses was
stored in "nic_ips" attribute. Add a new "remote_nic_ips"
attribute to be able to differantiate which IPs are local
to given Server class object.
Change-Id: I03dac140241341996674b350c51c18da6e2ee447
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6205
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I039a2e22a665e0d52082e6876f2c7c1cd9a336c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
If config without this field was used then
script resulted in KeyError exception.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Icf0b270d28dcc6bf44b66c4b9ed583a6b3ef08b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Standard lib modules first, then pip installed modules
and local modules last.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If0159fad29bab5bef0b69aa803e3cea429cc5f25
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6202
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Using shell=True was unnecessary, as it spawned additional
shell process for any subprocess with this option set.
We don't need that in this script and it's generally
discouraged.
Also removing check=True from some calls as don't have
these subprocess calls in try/excepy anyways.
Change-Id: Ibb9b5d71119c9dd877209ea77b8351f9b610cade
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Instead enabling each measurement (cpu/power/memory) just
use a single flag and enable them all at once.
Change-Id: I8a639b697285aa741f28b5ddec11ce70c34fc760
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5980
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use terminate() instead of kill() to exit more gracefully.
Using kill() resulted in (sometimes) output not being saved.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3ff1dec8cb0804f6e0674c5ed61bbe4ec9ea70ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6045
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
"measure_*" threads in script use the same results dir
as the results parsing function. To avoid race try to
create results destination directory early.
Change-Id: Ic391a7c2fb3decff64f1fdf51782abb940706d38
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6044
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Enable pcm-power measurements with appriate option.
This will be used for scheduler tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I57acc9905c6f1acd7bc3ecdbf886b209a2cdb653
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5979
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
