This patch
- applies nvmf_rdma_get_lkey(),
- changes pointer to struct iovec from iovec to iov,
- changes pointer to ibv_sge from sg_list to sg_ele, and
- passes DIF context instead of decoded data block size and metadata size
- use cached pointer to nvmf_request to call
- change the ordering of operations to setup sg_ele slightly
for nvmf_rdma_fill_buffers_with_md_interleave().
Name changes are from the previous patch.
They are for consistency with nvmf_rdma_fill_buffers() and a
preparation for the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I942fb9d07db52b9ef9f43fdfa8235a9e864964c0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469201
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reduces the diff in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I85dccdc1a1a5a51777934121f50a6af97feda5a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add an new RPC iscsi_portal_group_set_auth. This RPC overwrites
the setting of CHAP authentication for discovery sessions by the
global parameters specific for the portal group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I01578b2d01e3dbed599db10340d5053fb0a3738d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is another preparation to support per portal group CHAP authentication
for discovery session.
Add CHAP params into struct spdk_iscsi_portal_grp, and initialize them
by global parameters at spdk_iscsi_portal_grp_create().
Copy CHAP params from portal group to connection at spdk_iscsi_conn_construct().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1ecb812266ac3d090f8e6db21d1d6a090f1811d9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to support per portal group CHAP authentication
for discovery session.
Previously require_chap, disable_chap, and mutual_chap had been set
and used in iscsi_negotiate_param(), and chap_group had been set
and used in iscsi_get_authinfo().
If a connection is in a discovery session, the connection can get
all CHAP params at its creation, spdk_iscsi_conn_construct().
If a connection is in a normal session, the connection can get all
CHAP params in iscsi_op_login_negotiate_chap_param().
Each connection is in either discovery session or normal session.
So the following change is possible and is done in this patch.
spdk_iscsi_conn_construct() sets all CHAP params of the connection
by global parameters. Then iscsi_op_login_negotiate_chap_param()
overwrites them by the corresponding target's parameters.
iscsi_negotiate_chap_param() and iscsi_get_authinfo() just refer
the CHAP params.
Besides, iscsi_get_authinfo() changed to call just
spdk_iscsi_chap_get_authinfo() inside, and so inline
spdk_iscsi_chap_get_authinfo() into iscsi_auth_params() and then
remove iscsi_get_authinfo().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8028673cc6923e1b8bc20af55e0c3cc933972fc0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469218
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9fb7a998f7c13ce53cba630a895e8e11cf5f4a1c
Signed-off-by: Benjamin Saunders <bsaunders@google.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467559
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bdev_io_get_append_location() will be
used during zone append command to retrieve
location of data write.
Change-Id: I1f46ae9d2f745aa53264c1a01da3f7cef4f38c72
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
SPDK_ERRLOG lists the function name, so remove old references that
assume it doesn't and reprint the function name.
Change-Id: I69da6ca0a25bf0eda07d8dad52bcfadf964ac715
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Factor out getting lkey and checking translation length in
nvmf_rdma_fill_wr_sge() into a function nvmf_rdma_get_lkey().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I495ba9ae4a48b4aa7dc35a0bd72708753846dfdc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Cache pointers to iovec and ibv_sge at the head of the function
and use them throughout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I493759bf3989ced4390d077280cd44c122847d08
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out setup WR operation from nvmf_rdma_fill_buffers() into a
function nvmf_rdma_fill_wr_sge().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I813f156b83b6e1773ea76d0d1ed8684b1e267691
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468945
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
The subsequent patches unifies getting buffers, filling iovecs, and
filling WRs in a single API. This is a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I077c4ea8957dcb3c7e4f4181f18b04b343e9927d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
This is a preparation to unify getting buffers, filling iovecs,
and filling WRs in a single API in RDMA transport and then to unify
it among RDMA, TCP, and FC transport.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia69d4409c8cccaf8d7298706d61cd4e2d35e4406
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468944
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
This patch makes multi SGL case possible to call spdk_nvmf_request_get_buffers()
per WR.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I977ebb0c6b2a67218c9b6fc20dc26a93a6ec770b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468943
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
This patch makes multi SGL case possible to call spdk_nvmf_request_get_buffers()
per WR.
This patch has an unrelated fix to clear req->iovcnt in
reset_nvmf_rdma_request() in UT. We can do the fix in a separate patch
but include it in this patch because it is very small.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If6e5af0505fb199c95ef5d0522b579242a7cef29
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch matches the ordering of single SGL case and multi SGL
case for parsing SGL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iea026b48e8957e140b71db7afaf8aca88634dc33
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In nvmf_rdma_requst_fill_iovs_multi_sgl(), length of descriptors
are accumulated into req->length. However, req->length was not cleared
when nvmf_rdma_fill_buffers() fails in the middle. This patch fixes it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I80a55d90d09c8af46d570e017d342afd69f41996
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
wr->num_sge has to be used in spdk_nvmf_rdma_request_fill_iovs(),
and memset() can be used instead of clearing each variable.
Besides, holding cached pointer to the current WR simplifies the
code a little and so is done together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iebda158f85e3a0e3046686f76991217fa7297c24
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
With this change we only check the subsystem state once.
Previously it did it twice, and with a different order
(once PAUSED || INACTIVE, the other INACTIVE || PAUSED).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idef44accc69dccb9d161b8f04b9d5d3bbbf9e037
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The previous version of this function precluded one target name from
being a leading substring of another. i.e. if "nvmf_tgt_1" was already
used as a name "nvmf_tgt_11" could not be used subsequently.
Just an odd quirk that shouldn't be the case.
Change-Id: Iea59b6757512f01070e48074e35a11d942e399bb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Also update the changelog for the previous few changes.
Change-Id: I79ac330b4992ccc3e41fd1643b09128c6de6c86d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The current connection scheduling mechanism (RoundRobin) doesn't take into account the qpair type and assigns each new qpair to the next poll group. As a side effect there might occur a disbalance when some poll group handles more IO qpairs than others. In RDMA transport it is possible to get the qpair type before the controller creation using a private data from the rdma_cm event, this allows to schedule admin and IO qpairs in the balanced way.
Change-Id: I90c368a41c4cd0f5347a83cab7511e4494f05b29
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468993
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Operations with poll groups list must be protected by rtransport->lock.
Make rtranposrt->lock recursive to avoid unnecessary mutex operations when
the poll group is being destroyed within spdk_nvmf_rdma_poll_group_create
Change-Id: If0856429c10ad3bfcc9942da613796cc86d68d8d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468992
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
On a DIF verification error, fail the read command with a status code
of APPLICATION_TAG_CHECK_ERROR, GUARD_CHECK_ERROR, or
REFERENCE_TAG_CHECK_ERROR and a status code type of SCT_MEDIA_ERROR.
The state of the request is TCP_REQUEST_STATE_TRANSFERRING_CONTROLLER_TO_HOST
when a DIF verification error is detected. So dequeue the request
from C2H data queue, return the response PDU, and then send the command
response.
This was an item on the TODO list. RDMA transport do this right
behavior from the start and so TCP transport follows it by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I102bbd253cc8c1379d0937c9536bf2bfe04cbf6a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
tcp_req->orig_length had been set just before I/O submission but
the value is already fixed in spdk_nvmf_tcp_req_parse_sgl().
Hence move setting tcp_req->orig_length accordingly.
This follows the good practice of RDMA transport.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I99f6e266d8f7027bce810864314f3ee24a1af10c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Algorithm and some code from: https://github.com/aklomp/base64
Get ~2.3x speedup for encoding and ~1.7x speedup for decoding on
AArch64.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Ifce07299aea722337b0b4886117d1f616c5c03ef
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_zone_management() allows to perform
management action on a zone. Zone is specified
by start logical block address. Available zone
actions: open, close, reset and finish.
Change-Id: Ie7eaed3e2cc7b9b49dd51ee2d6c28b4ef2f23eb9
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460647
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bdev_get_zone_info() is used for retriving
information about zones inside zoned namespace.
Change-Id: I8f931505245e984c0b1ee35ed6592c978ee47544
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some internal bdev.c static function will be shared
with new zoned bdev module.
Change-Id: Ifbb8bf443f67b2daf97858b15d474ecce98a9efb
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469100
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Added new public header for zoned bdev. Zoned bdev is an
extension of the bdev interface. Generic concept comes
from ATA/SCSI and is also being worked as an NVMe TP.
Zoned device logical blocks space is divided into fixed-sized
zones. Each zone is described by its start logical block address
and capacity. Writes to a single zone need to be sequential.
After zone is fully written it need to be reset to write to it
again. Such writing schema could be very beneficial in terms of
write amplification factor for NAND based devices.
SPDK Flash Translation Layer library will be consuming this
interface in the future.
Extending SPDK bdev interface will allow to use existing bdev
infrastructure for this new type of devices.
Zoned device have several properties defined in spdk_bdev
structure:
- zone_size: default size of each zone
- max_open_zone: maximum number of open zones
- optimal_open_zones: optimal number of open zones to get
best performance on writes
Single zone properties are defined in spdk_bdev_zone_info
structure:
- start_lba: first logical block of z zone
- write_pointer: logical block address in the zone at
which next write shall occur.
- capacity: maximum number of logical blocks that may
be written in the zone when zone is empty.
- state: zone state
Several zone states are defined: Empty, Open, Full, Closed,
Read Only and Offline.
To change zone state zone actions are defined: Close, Finish,
Open and Reset.
Change-Id: I5fcc22d548c15743329344cae96f5ff73e268504
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
This patch is entry point for extending bdev
interface to support devices with zoned namespace
semantics.
spdk_bdev_is_zoned() will allow user to check if
bdev is zoned bdev.
Change-Id: Id9ea9898d406d1d942bf3081b00ebcb574ac2b5e
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
used for creating a new spdk_nvmf_tgt structure in the application.
Change-Id: Ib0182ea6d935b84b4fe4fcad79e173cb46859669
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Functions added in this patch:
spdk_nvmf_tgt_get_name - get human readable name from target.
spdk_nvmf_get_first_tgt - start iterating over global list of targets
spdk_nvmf_get_next_tgt - get next target in iteration
These functions will facilitate the following RPC
nvmf_get_targets - get the names of all active NVMe-oF targets.
In this series, I will also add two more RPCs, nvmf_create_target, and
nvmf_destroy_target, as wrappers around the create and destroy
functions. Since all of these changes are pretty minor and closely
related, I will just do one big changelog entry at the end.
Change-Id: Ia9f1248fbf9726fa3889998a169211fb25e724f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
