Nvme-cli submits a RESCAN IOCTL after a format command to
update any information that may have changed during the
format, such as LBA Format. This patch adds support
for RESCAN by executing nvme_ctrlr_update_namespaces to
update the controller information.
Fixes: #1964
Change-Id: I9f03e00a7f39339947ff02390f69ce806e1cfa0e
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8146
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This UT was not working as intended, and was covered by
scheduler implementation and direct modification
of the lw_thread stats in UT.
A single _reactor_run() iterates over all active pollers.
If at least one returns busy, so does the thread.
Thread load at the begining of UT is not 'low', but 100% busy.
To emulate loads outside of the 100% busy/idle, multiple
spdk_thread_polls need to be exectued.
As such to keep this case simple, the busy poller is removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I21b4c607977ed5926e0bb2743c33636cfc49f328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
At no point in the UT thread and reactor stats
were verified. This patch makes sure that those are
checked and points out a glaring issue fixed in the
next patch.
Please note that spdk_get_ticks() and spdk_delay_us()
increase a single global value, which does not play
well with tests simulating multiple reactors.
As such each round through reactors resets the
global timer and verifies it at the end.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27878fe35c1606ec20c548fe3bb5ede0102c8a63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
After commit a31e319f "nvme: init discovery ctrlr using nvme_ctrlr_process_init"
SPDK will not initialize vfio-user subsystem if we didn't specify it
in the command line, so add this parameter as other transports already use it.
Change-Id: I5331459e9a88d8d94fa8b6ce693e086516b9f0bc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8120
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By the next patch, nvme_io_channel will be used as an I/O channel
to a single nvme_bdev. This channel is created to a single
nvme_bdev_ctrlr and has a corresponding I/O qpair. nvme_io_path
will be a better name especially when we support multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic34162f3c383676c5249396a09173329fc6febce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8095
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously only a single thread could submit abort commands for admin
commands and it was the thread of the corresponding controller.
When we support multipath, we need to traverse the list of controllers
to which the target admin command is submitted. Threads of controllers
may be different.
On the other hand, the previous implementation made the I/O flow very
clean, but the I/O flow will not be clean if there are many controllers
and the subsystem does not have its thread.
This patch changes the policy so that any SPDK thread can submit abort
commands for admin commands.
Then when multipath is supported, we will be able to traverse the
list of controllers simply on the current thread to abort either I/O
command or admin command.
We already are able to submit any admin command on any thread anytime
including abort command. Hence this will not cause any issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib69de33f2e84b03861c7d95ce060035bdb589e4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8121
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We can hold bdev_io directly in nvme_bdev_ctrlr as an outstanding reset.
We can put spdk_bdev_io_from_ctx(bio) into a parameter for a few
functions because it is used only once in a function.
Passing not spdk_bdev_io but nvme_bdev_io to bdev_nvme_verify_pi_error()
remove unnecessary substitution.
This is a little more efficient and simplifies the implementation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If49ad9fa42abf27decf3afcd8c994f55faa3bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8094
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also, move ocf build outside the autobuild suite to make sure
scanbuild also picks up all the pieces.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5f0de407cc55b1dc153cc856f68e053a54fc0682
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6841
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This ensures the discovery ctrlr initialization is
done the same as normal ctrlrs. This will be
critical as we make the driver fully asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33c4fd7c82d241c30e7adb89abe79b8088c8776a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Read CAP (Capabilities) register as part of controller
initialization instead of controller construction.
For now, still read CAP in the pcie and vfio-user
controller construction, since they need the
drstd (doorbell stride) to construct the admin
queue.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I000fe880f2ec0d6de1d565c883d7ea0ae1ac2c81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8078
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Read VS (Version) register as part of controller
initialization instead of controller construction.
This prepares for upcoming changes to make
controller attach fully asynchronous. Since reading
fabrics registers is an asynchronous operation, it
will be easier to read the VS register as part of
controller initialization which operates as an
asynchronous state machine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I771386dbdf5902633e0d9f91b3b20be98f26fdc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8076
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
If the -Z option has been specified bdevperf checks that the bdev
module supports ZCOPY.
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I0bebad68090f48a1b1250afe4bc4c752c2061bfb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7352
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following Linux NVMe host, add UUID and EUI64 comparison to
bdev_nvme_compare_ns().
Besides, previously the return value of memcmp() had been used as
the return value of bdev_nvme_compare_ns() and this was wrong.
Fix it in this patch together.
Add unit test cases for bdev_nvme_compare_ns().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I069ab53e77741d6348b847d51e84a9338e2f3787
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7755
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the macros for red black tree provided by Free BSD to speed up bdev
name lookup in spdk_bdev_get_by_name().
In the bdev_multi_allocation test, we can get 3x ~ 5x speed up when
creating multiple bdevs for various bdev nums.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I49a2fbcccf06d4c36cbd445ce59e0b0dd4ada31d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7837
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Purpose: Let the users know the current available registered Rados
cluster and the related info.
Change-Id: I115c129ae6e4b0372579aad168fd88f8be136357
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7990
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
512 and 1024 number of hugpages is not a sensible value in case 1G
hugepages are in use. Instead of setting fixed number of hugepages,
determine it safely based on the default size and allocate 1GB for
node0, 2GB for node1 (if present).
Fixes: #1954
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I850ba877332527a68ec4ddf7408fcc183835cda6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8012
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
nvmf_get_ana_log_page used req->data to store the log page result.
While the req->data only contains the first iov, if req->iovcnt is
larger than 1, the req->data may not hold the complete log page; and
even worse, the log page result may be written to invalid address and
cause memory corruption.
The following patch will fix the same issue for other commands in
nvmf_ctrlr_get_log_page.
Fix#1946
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I495f3be05c82be5cd53609772c655c8924b9179f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7923
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Since we will reuse send_pdu for other purpose in the next
patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iee5166131b70a25bc13aaa847bfc9066231f31a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8028
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Loading subsystems and restoring state from a JSON config file is useful
outside of the SPDK application framework, so move it to lib/init.
Change-Id: I7dd3ceace2e7b1b28eef83c91ce6a4eedc85740e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6645
Reviewed-by: Tom Nabarro <tom.nabarro@outlook.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The functions to initialize the SPDK subsystems or tear them down
was previously an internal-only API. Make it public for use by
applications that aren't leverage SPDK's application framework.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2ebfd020e6fa4c1947fa1c1a2ac509ce9b0242f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6643
Reviewed-by: Tom Nabarro <tom.nabarro@outlook.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Before this patch idle_tsc was sum of all idle tsc of all
threads running on a reactor.
There are cases when no threads are present on the reactor,
and _reactor_run() spins doing nothing.
To give more accurate representation of the reactors state,
the idle_tsc now adds time spent doing idle spinning.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If797b2a03507d17b07367d56d5f6c40cefbbbd49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7900
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
tsc_last value is used to update thread stats
during _reactor_run(). See:
spdk_thread_poll(thread, 0, reactor->tsc_last);
If no threads were present on the reactor,
this value got outdated and resulted in
adding time reactor spent with no threads to
stats of the first thread placed on that reactor.
This patch fixes thread stats by making sure
that argument to spdk_thread_poll() is up to date.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0c35fdba1b63b6ee19a5a2b34751090839cb2438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7845
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch does not change the UT in functional way.
Added accounting of last_tsc and spdk_get_ticks() similar
to the real application.
First the reactor_run() [not _reactor_run()] starts
reactor->tsc_last to current time. UT now set it at the start
and never touch it again directly.
Second the spdk_get_ticks() is updated to the elapsed time
to simulate flow of time, and make sure that its further
usage is up to date to the current time.
Fixed typo in test case description for test_reactor_stats.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iaa2eb00fa3bffc2f21f1692da0259f1d023086b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7904
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This is useful for applications even if they elect not to use the SPDK
event framework.
This doesn't shift everything in one go - just the subsystem
initialization logic. Configuration file loading also needs to move
in a separate patch later.
Change-Id: Id419df1045442d416650ed90e5ee78adfdd623d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6641
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Upon running abidiff to get the list of impacted interfaces it seems
to exit with != 0 status. This triggers errexit causing the script
to exit in the middle of processing the lib files so we don't get
the full picture of all potentially impacted files. Ignore the
exit status in this case and allow the loop to go through all the
.sos.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7edc5122161b0927fdd9a918571419f32fd46dac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There's already a new LTS release in place, hence these workarounds
are not needed anymore.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Idf597a5cf8da18d75f2630d59a277d4545fadc0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7987
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This package is not available under latest 13.0 release, however,
the /etc/os-release we are looking for is already installed there.
For older versions, and in case this package is missing, we still
can determine that we are running under freebsd as part of the
fallback check to uname().
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I6a04eb66392d91899a4b55d4eb508bef140e924a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7985
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Get all of the hot stuff to the first cache line.
* Shrink the xfer enum to one byte (it only has 3 values).
* Pull out the dif enabled flag form the dif structure so it
can be access separately
* Rearrange the members
Change-Id: Id4a2fe90a49c055a4672642faac0028671ebfae9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7827
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is done as part of the work to fix currently existing CI job
using this particular test suite.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id5e9e8a814fb3025f192871650b8aa317f2de910
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
This patch changes the order of IDENTIFY_ACTIVE_NS and CONSTRUCT_NS
controller states. It is required to further improve memory management
for namespaces by allocating memory only for active ones.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ie540442b1bd9e897afcbaa4319c139109dd0c515
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6503
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous implementation allocated memory just once at the beginning of
active NS list retrieval procedure. It allocated memory for maximum
possible number of active namespaces, i.e. 'cdata.nn'.
This patch changes allocation logic. One page is allocated at the
beginning. If more is needed, reallocation is done with one more
page.
This patch also removes SPDK_MALLOC_DMA flag from allocation since we
don't do RDMA directly into this buffer.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Iaa80c4d70c54daaf71dcbf755c63a01a1d83b772
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6502
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Declare single trap from nvmftestinit() instead overriding main trap
depending on the use-case (veth vs phy).
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I23c66fc5728510d06eee9837843f0734b2d03dcf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7850
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
As these tests were limited to SPDK_TEST_BLOCKBDEV the spdk_dd was
not being tested against liburing. Make sure it is the case now.
Also, fail the test if spdk_dd is not linked to liburing in case
where such tests were requested.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5704577530048ed4775ea15a6cdacf23380b5072
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Use the macros for red black tree provided by Free BSD to manage
timed pollers efficiently.
Allow RB_INSERT() to insert elements with duplicated keys by changing
the compare function to return 1 if two keys are equal.
Check the return code of RB_INSERT() because this is the first use case
for RB tree macros in SPDK. We did the same for RB_REMOVE() by
adding another temporary variable but we remove it from this patch
because it is not so important compared with RB_INSERT().
When a timed poller is inserted, update the cache for the closest (leftmost)
timed poller only if the tree was empty before or the closest (leftmost)
timed poller was actually changed. We do not have to use RB_MIN()
because all duplicated entries are inserted on the right side.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibe253ca8eecc10116548b5eedbcdba8fb961b88d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7722
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This change is a preparation to first dequeue the closest timed poller
always when it is expired. Previously the poller_remove_timer() calls
were not consistent and difficult to follow.
spdk_poller_pause() sets poller to PAUSING even when it in RUNNING
and move it to PAUSED after returning from its context.
If spdk_poller_pause() and spdk_poller_resume() are called while poller
runs, it is moved to WAITING. Hence thread_execute_poller() and
thread_execute_timed_poller() ignore such cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I29340613a2ec0c3529d0886f4d81c0a0fdf8745d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a little complex test cases to avoid regression by the following
patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c94edd913f0a582868e355be085a1faf9bd1a94
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This API was removed previously, so remove remaining
references in map file and unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba2f6a5f5ba590d3996dc133c8181083a33d7405
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7963
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There are logs like below in existing CI tests:
"nvmf_subsystem_create is deprecated, use nvmf_create_subsystem instead."
Change-Id: Id257ab13120a71ad3d0ae7ed22ed6e0a4f005cf0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7670
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Revise bdev_rbd_create rpc call to add an optional
parameter "--cluster-name", e.g., "--cluster-name Rados".
Then users can create a rbd bdev with registered
Rados Cluster. This shared strategy can be used to
remove the thread creation overhead if multiple rbds
are connected to the same Ceph cluster.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ide5800f8fc6b2074805272a59731c666fe279b9a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7584
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently this will only support a global setting
that must be set on the command line. We can make
it per-job later, but will require adding float
support to the conf library.
Tested by running bdevperf with some malloc
bdevs. Performance with low theta values (i.e. 0.2)
are almost identical to random w/o zipf. But
higher zipf values start to show better performance,
because we get more hits on data that is already
in the CPU cache.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I55b1587cdec2919973b488786d361042ca210606
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7790
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This eliminates the thread-local seed variable. But
we're also adding zipf distributions in an upcoming
patch, and we'll want to store that context in the
job rather than making it thread local.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If8079682e7d3da8f989ee6b880edc8d3fcb4fdd8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
In json_config test, when there are multiple nvme disks, we see errors like:
ERROR: expected event 'bdev_register:Nvme0n1p1' but got 'bdev_register:Nvme1n1' (whole event line: bdev_register:Nvme1n1:1)
The reason is when there are multiple nvme disks in the system, when
start nvmf_tgt, it will register all the disks in bdev, so there would
be multiple bdev_register events for these disks before we run
create_bdev_subsystem_config. So in create_bdev_subsystem_config we need
add these events to expected events list first.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: Ice8f5464975e68ae63fec891ef18dbc7590a9ab5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7858
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we allocate buffers perf each SGL descriptor.
That can lead to a problem when we use NVME bdev with
PRP controller and length of the 1st SGL descriptor is
not multiple of block size, i.e. the initiator may send
PRP1 (which is SGL[0]) which end address is page aligned
while start address is not aligned. This is allowed by
the spec. But when we read such a data to a local buffer,
start of the buffer is page aligned when its end is not.
That violates PRP requirements and we can't handle such
request. However if we use contig buffer to write both
PRP1 and PRP2 (SGL[0] and SGL[1]) then we won't meet
this problem.
Some existing unit tests were updated, 1 new was added.
Fixes github issue #1853
Change-Id: Ib2d56112b7b25e235d17bbc6df8dce4dc556e12d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7259
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When we introduce RB tree, getting the closest timed poller is not
O(1) but O(log N). To mitigate such delay, cache the closest timed
poller into thread, and update the cache when its content is changed.
Add unit test cases for this change. They will also clarify the current
behavior of spdk_poller_unregister() and spdk_poller_pause() for
timed pollers.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibb98a54c261859a3210034038d3953e5c93ef8aa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7720
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Some systems may have page size other than 4096 bytes
Change-Id: Id56bb1566fff480edbe1a293121fc7a68c74252a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Runtime RPCs such as bdev creation has no chance to wait for
bdev examination to finish. To handle this case commit below
introduced bdev_wait_for_examine RPC, and built it into all newly
saved JSON configurations:
(e57bb1af)lib/bdev: build bdev_wait_for_examine into subsystem
Some tests generate the configuration by hand, rather than
saving it from an existing application.
This patch embeds this RPC into the test configs.
Fixes#1760
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I79f998d722a2d19aa98b78333c64dbd2c1151444
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7861
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Function initiator_json_config is never called with
additional arguments that would fill up the subsystem
JSON.
Handling for the comma is removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6ce5648a0eac29cb0f45d210696edf7977dfe89d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7860
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Use spdk_thread_get_last_tsc() and spdk_thread_get_stats() in
unit tests for reactor. As a result, we can change one inclusion
from spdk_internal/thread.h to spdk/thread.h.
This is the same effort as spdk_poller.
The following patches will move the definition of struct spdk_thread and
enum spdk_thread_state from include/spdk_internal/thread.h to
lib/thread/thread.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I24d4a52ecf885b6e7db749616ee1f95b82574dc5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add {min,max}_cntlid to spdk_nvmf_subsystem, defaulting to 1 and
0xFFEF, respectively, and add nvmf_subsystem_set_cntlid_range() to
allow the controller range to be configured in the range [min_cntlid,
max_cntlid].
Also add {min,max}_cntlid to the nvmf_create_subsystem RPC to allow
the controller ID range to be specified when creating an nvmf
subsystem.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I936db3bb0c9a38569063a6fd3c11df262dfad776
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7322
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It's only for tcp now, but the transport here is rdma. So there is no need to assert.
Signed-off-by: ChengqiangMeng <chengqiangx.meng@intel.com>
Change-Id: Ieffaac9d31a8f9c79a0d9fd226d74268986b7a77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7823
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
fio.py simply wraps itself around fio and doesn't do anything that
would require python to be in use. Having it in a simple bash form
makes it easier to integrate it with autotest's common sh tooling
and to debug any potential issues with the underlying tests.
This also fixes#1919 by making sure only proper nvme devices are
selected for the nvmf targets.
Fixes: #1919.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I111d00df3c7b2517f431cae865e258a665c2ecb3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7684
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This helps in next patch in series where multiple
completions will be executing.
UT is adjusted since one additional poll is required.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id72377ddef91e40cdbc2bdea6f33c23309b0ca3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
During snapshot creation the original blob becomes
a thin provisioned blob that will only the diff of data after
snapshot creation.
Despite the comment in the UT the number of polls before issuing
blob write was hitting blob BEFORE it swapped with new one.
Issuing I/O during this period shall check for io freeze
before checking cluster allocation.
Otherwise bs_io_unit_is_allocated() hits assert for thin
provisioned blob. This is because cluster map of blob is
empty, but properties have not been updated yet.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I742e1a50b14d456ae1e6de13b5111caec3e8322c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
ctrlr_discovery.c doesn't need this #include.
Including it causes bdev_module.h types to be
emitted to the debug symbols at least with some
compilers, which can result in unwanted abidiff
errors.
The unit tests do need it, so just include it
there instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad28f9778ce08b11b52325658583ae9032295f3a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7813
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The library itself doesn't need it. The unit tests
do need it, so just include it there.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9aefd303ae12928d45141029436509f185105bd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
- Use consistent cache line size units in KiB across RPC calls
and config files. The KiB units are much easier to use then
the bytes units and are more human readable.
- Properly handle cache start when cache line size is incorrect.
- Add test to check if cache line size value is reported correctly.
- Add cache line size info to JSON RPC documentation.
Fixes#1858
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Change-Id: Iec9ede85f6884b64605d2d112947b3f175cbd938
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7614
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Older version wasn't providing full support for PMR setup, this one
does.
Rewrite get-pmr such that it supports CMB/PMR sizes greater than 4GB.
Also, since CMB and PMR can coexist in newer versions of qemu try to
detect both under single device.
E.g.:
nvme0:0000:00:04.0:64-bit:prefetchable:0x700000000:0x707ffffff:0x08000000:cmb
nvme0:0000:00:04.0:64-bit:prefetchable:0x400000000:0x5ffffffff:0x200000000:pmr
nvme1:0000:00:05.0:64-bit:prefetchable:0x708000000:0x70fffffff:0x08000000:cmb
nvme2:0000:00:06.0:64-bit:prefetchable:0x600000000:0x6ffffffff:0x100000000:cmb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic159f5c12d3ef39db77617f7d64f825356c255a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Passing cpu_mask hints that match only single core were
usefull to prevent any accidents when doing round-robin
in case of 'static' scheduler.
In practice this is not required in case of 'static' scheduler,
the threads will be spread out over all reactors anyway.
This hinders other schedulers which try to respect the cpu_mask
hints, as they would not move the thread to any reactor.
Preventing bunching up less used threads on single reactor.
Drawback of this patch is that poll group names will not match
the cores they are on.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5fb308362dd045228ea9fcca24f988388854c054
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7028
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Nvme-cli uses NVME_IOCTL_IO_CMDs for "io-passthru"
commands to cuse devices. This patch adds support
for that IOCTL.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I20e0ac91ba08fce91bc5da1f4a1e454058cdd1e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7741
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The nvme cuse IOCTLs are actually creating passthru commands
that can be either IO passthru commands or admin commands.
Renaming the routines to correctly reflect that should limit
the confusion when reading the code. Passthru commands that
are admin commands will go to the spdk_nvme_ctrlr_cmd_admin_raw
interface and passthru commands that are IO will be sent to the
spdk_nvme_ctrlr_cmd_io_raw interface.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I8d427fe8b5f503fdb2d193236c77d410d5b13886
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7740
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: We will also support the kernel idxd driver, so we do not
need export this feature in the module file.
Change-Id: I965e031497920f527962ba187bccd81de6977b8f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is prepared for using the hardware offloading
engine in accel framework. And some fields in nvme_tcp_pdu
needs to be DMA addressable.
Change-Id: I75325e2cd7ff25fe938bea0ac9489a5027e3e0e9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7770
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is used to prepare using the accel framework to calculate
the crc32 because some fields in this structure needs to be allocated
in DMA addressable memory.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ib8def5596e60f4702709da647145c4e2b6d6848f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7767
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We cannot rely on DSM/DEALLOCATE as a write zeroes
alternative, even if DLFEAT reports that deallocated
blocks will be read as all zeroes. DEALLOCATE is
advisory, meaning that blocks may not actually be
deallocated. In cases where they are not deallocated,
they will not be read back later as zeroes.
QEMU 6.0 started reporting DLFEAT as returning zeroes
for deallocated blocks but for some of our write
zeroes tests, blocks aren't actually deallocated.
We may be able to add quirks in the future if we know
that a controller reliably deallocates blocks, but
for now we need to revert this completely.
Note that since bdev/nvme module now does not support
write zeroes in any cases, we need to disable the
write zeroes call in the unit tests.
Fixes issue #1932.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79f0673774b621a9ffcc46891728cc7719e34cdb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7723
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will help us to add unmap split function, also
remove bdev_io_type_can_split() because we changed
to use swith(io_type) ... case now.
Change-Id: I449d6a9f5bf2d0b43dd124bbfc9e1ca2afddc15a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7516
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Purpose: This patch is used to prepare to add the kernel
idxd support later.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: If89665f95d622c7342ab75050664158ec6fc615a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7330
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
(Note: this patch was previously applied as b32cfc46 and then reverted
as 63642bef.)
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7739
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
1) use spdk_bdev_get_name() accessor
2) use __SPDK_BDEV_MODULE_ONLY #define
The latter allows nvmf to just get the spdk_bdev_module
definitions and APIs that it needs for claiming bdevs
for purposes of avoiding the same namespace used in
different subsystems.
This also ensures that future changes to structures
like spdk_bdev and spdk_bdev_io will not cause
lib/nvmf so version changes.
Note: we include bdev_module.h explicitly in the
nvmf/subsystem unit tests now, before including
subsystem.c, because the unit tests do depend on
knowing the internal structure of spdk_bdev.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2f499a741d19f4749eadb402641f28137245fd23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7738
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is already set by nvmf_tcp_req_pdu_init
when we get the pdu. So we do not set it again.
Change-Id: I034bbc46e600afd802457c0b152e303f16bafba3
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7714
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit b32cfc467b.
This commit fails the ABI checks and only got through because the checks
were disabled until 21.04 hit.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id26b8f8ba551193d99b1ccbd31b35378b4095a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7731
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This check was disabled after 21.01 LTS to allow for
clear break of SO versions. Now that SPDK 21.04 is being
released, this test should be reenabled.
See following patch for details:
(e4070ee0)so_ver: increase all major versions
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8a299a340338e7a2ab3439b81153818778b4c93a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7616
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
test script 'test/interrupt/reactor_set_intr.sh' will
do various reactor set intr operations on interrupt_tgt
without spdk_thread and with spdk_thread.
Change-Id: Ie5af1dc68b0272c34a91e8a66b78088c3794907c
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7348
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There are three modules implementing the bdev-zone API:
bdev_nvme, bdev_ocssd, and vbdev_zone_block.
For all three modules, the number of zones can be calculated using:
block_count / zone_size.
To avoid this calculation being performed everywhere, create a helper
function in bdev_zone.h, together with the other zone APIs, such that
a user can easily get the number of zones.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2967b15a604ab8bf4420588e7510b9820762f925
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7451
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
tcp transport doesn't send a response capsule when
c2h_success is set even if cdw0 or cdw1 are non-0.
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Signed-off-by: John Meneghini johnm@netapp.com
Change-Id: Ieba81fcc50342a2009f7931526e6f8392e26b6a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6808
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New UT verifies number of extent page writes for
thin provisioned blobs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6b52195d26c3c1414ca862b03e8a3043bbe29b42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7017
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This patch addresses couple issues:
1) Before issuing the md syncs the previous steps in test left
blob state in dirty state already. The resize never had a chance
to apply. This patch adds a proper md sync and polls for completion.
2) Changing blob state is something that should be done via API.
In order for dirty state to apply immidietly set_xattr is now used instead.
3) Verify test state in callbacks to make sure not only the number of
completions is correct, but their order.
This patch is introduced because of the test originally worked
only because of the extent pages always writing out its pages.
The second sync always was delayed because of this.
Meanwhile that should not be the case, since no MD or EP modification
was done.
Later in the series Extent Pages are fixed, but this test remained incorrect.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iac17c27f6ff83f2b79835aa6e48472d5293c44d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This function finds a placement_id that does not have a group
associated with it.
Change-Id: I1306690e980fd4661f46dba9fb283f048a962eba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7223
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added nvmf_tcp_init() to run tcp through physical E810 network card.
If there is not E810 in system, tcp will still run on virtual eth.
Change-Id: I9a983c92175b27c45457682d42d72ef307fef260
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
When the format command is issued, the kioxia drives responds with "NS Attr change" notices.
In the callback function of the notice, the CQ Head Doorbell is updated twice with the same
value while issuing the Active NS list & identify NS commands.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I8cc80fba0a226c22753e605ef3129602a9313ce7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7149
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also update the UT.
Change-Id: I6086bf4cafca8a917a467490955d7df0ba8930d5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7495
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is done in order to distinguish between different flavors more
easily.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9740677c878a8e6ad5abb3e2b5c22b9d41d59fc6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7117
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is done as part of a request to run tests on PMR-capable VMs
in the CI pool.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icf64bf07cd81945e519b0d212ca126d79c3fecbc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since the maps are unique to modules, they can store the group_impls
directly.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7f11db558e38e940267fdf6eaacbe515334391c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This allows for different policies per module, as well as overlapped
placement_id values.
Change-Id: I0a9c83e68d22733d81f005eb054a4c5f236f88d9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Test scenario is as follows.
Some iSCSI initiator sends a Data-OUT PDU sequence such that the size of
the data segment of any Data-OUT PDU is not block size multiples.
Test if such complex Data-OUT PDU sequence is processed correctly.
Desired Data Transfer Length is 5 * SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH / 2.
Number of Data-OUT PDUs is 4. Length of the data segment of the first two PDUs are
SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH / 2 - 4. Length of the data segment of the
third PDU is SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH. Length of the data segment
of the final PDU is SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH / 2 + 8.
Three data buffers should be used and three subtasks should be created and submitted.
The test scenario assume that a iscsi_conn_read_data() call could read
the required length of the data and all read lengths are 4 bytes multiples.
The latter is to verify data is copied to the correct offset by using data patterns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e3939d07cd4f50fe3dcf659a18a9f8fcbe01e07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6584
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Test sharing data buffer among multiple Data-OUT PDUs.
Allocate real data buffers and the iscsi_conn_read_data() stub writes
data patterns into them.
The data pattern is to write offset per 4 bytes. This requires read
length to 4 bytes multiples but the requirement will be acceptable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I87c673c3bb0ada2afebb9332af9525cd9d7388f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6568
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This prepares for an upcoming patch to fix issue #1701 which
requires handling async events outside of the check
completions loop.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I4985d814903143511383172b1a443580db33a78f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7416
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We can return error status when processing RELEASE2 without
a reservation, also add a UT to cover this case.
Fix issue #1898.
Change-Id: I56ffa8eabfc0409307500f8740cb627aab9d2f0b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7379
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit aaac48880d.
This patch was showing issues with SPDK vhost mappings
when handling larger numbers of VMs.
Fixes issue #1901.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81bd311d26037dcb9340d85abcb4ea45b20a5170
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7424
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is necessary to the following patches to test reset continuation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20e0a6b96694eb06adadfbe8e20f73380645ea43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
It is more readable to use const variable rather than raw number.
memset is the way to initialize variable size array.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I42f3f34422ea96e06a99bd6cc02e0e91349a4009
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7323
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Previously when attaching a ctrlr, all namespaces had not been
populated. Hence we had to populate each namespace manually.
It is more normal if all namespaces are populated when attaching the
corresponding ctrlr.
This patch does such change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I55d9c444c492ba6e44a609eac81b1ef25a7190a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7313
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously spdk_nvme_probe_poll_async() had processed all attaching
controllers. Hence it was not easy to attach multiple controllers in
unit tests.
Besides, add a check to exclude duplicated controllers into ut_attach_ctrlr().
If the target is any SPDK library, we should insert another patch
only to do code movement, but this is a unit test file, and so it
will be acceptable to include code movement in the same file.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e8eba6a67b2a6d0df384214ff84aa5b0c602217
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7312
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Not only in accel_perf, but also in test event_perf.
Remove them.
Fixes#1895
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I2af1d9f6f077f3ae775af994567804633fc8f050
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7370
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Look for drives with 2GB of space at minimum.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic326229120ffc5d839bbf465855d8be857ab4f73
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7377
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7e739a4e085d150b0be73cd890f0cf85f05ab7fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7200
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Migration can take longer than 10s, hence we need to give fio more
time to spin in order to make sure it's still running on the target
vm after migration is complete.
On the other hand, reduce the timeout used to wait for fio after
the migration is done - there's no need to wait almost a minute,
half that time.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I1b53682d5c8bc72336a9eead28c395f97cd81fe7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
We only need SPDK_CU_ASSERT_FATAL to check for
NULL pointers. Other checks should just use
CU_ASSERT and variants.
There are some nvme_ns_cmd_ut checks that are
using SPDK_CU_ASSERT_FATAL unnecessarily. Let's fix
them.
Found during investigation of issue #1882.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0b313e44e2ed05554783933e7d4bbc5f07a7e84a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This include isn't needed in queue_extras.h itself.
There were a few places that were implicitly
depending on this include, so fix those to include
util.h explicitly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia962ae5a4403ee8ae15f3106d0d5e7d7412a4535
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Check if qpair has a poll group during the connect process,
use poll group's statistics or allocate own structure per
qpair. That is done due to not all applications use poll
groups and we want to avoid "if (qpair->group)"
conditions in data path.
Admin qpair always allocates its own statistics
structure but the statistics are not reported
since this qpair is not attached to a poll group.
Statistics are reported by spdk_nvme_perf tool
if --transport-stats and in bdev_nvme_transport_statistics
RPC method.
Change-Id: I58765be161491fe394968ea65ea22db1478b219a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6304
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These are interface functions that can be used by
an application e.g. spdk_nvme_perf or bdev_nvme
library. The next patches will add usage of these
functions.
Change-Id: I33b88e0e713c2ea5967f9241885e3257c5070577
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6300
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Replace old '/home/sys_sgsw' location by new created
'/home/sys_sgci/spdk_dependencies'
Also update readme with current user name.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ifcea15f704183c7ae0044ee02bd28b6bd891b262
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6927
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
bdev_nvme_delete() calls spdk_nvme_detach() in the end. However,
previously spdk_nvme_detach() stub did nothing and ut_detach_ctrlr()
was called separately if ctrlr wass attached by ut_detach_ctrlr().
This was to differentiate the two cases, ctrlr is statically assigned
or dynamically attached by ut_detach_ctrlr().
This might be a little confusing. Hence by adding a flag, attached,
to ctrlr, merge ut_detach_ctrlr() into spdk_nvme_detach(), and remove
ut_detach_ctrlr() calls.
Besides, change one SPDK_CU_ASSERT_FATAL to return NULL because the
other cases do that and the callers for ut_attach_ctrlr() already have
SPDK_CU_ASSERT_FATAL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2a73f57c6031819d3ae441a6874127ff5d53fc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make the following change simpler and testing
bdev_nvme_find_io_path() will be good.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac82bdba88e4abfa41c2ce04f10ce41a6b7dbd71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The following patches will aggregate multiple Data-OUT PDUs into a
single write subtask and we will not be able to use reqh->buffer_offset
to track the current offset of large write I/O to submit write subtasks.
On the other hand, each iscsi_task or iscsi_subtask is only read or write
Hence rename current_datain_offset of iscsi_task by current_data_offset
in this patch.
The next patch will use it to track the current offset of large write I/O
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I922582c5b9474a3c512f81d0f0425158a38a9a8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will want to aggregate multiple Data-OUT PDUs
into the same data buffer, but it will be 64KB at most.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I72eabbeae0b027c2fbff2a5837d180b06b0a1b49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6418
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will change the handler for Data-OUT PDU to
submit subtask only when 64KB data is read or F bit is set.
Previously, we had created a subtask when processing header and
before reading data segment. Creating a subtask beforehand is not
convenient for the following changes.
Hence create a subtask after reading data segment.
If LUN is removed while processing the Data-OUT PDU, the corresponding
primary task will be terminated by iscsi_clear_all_transfer_task(),
and any subtask completion is not sent to initiator. Hence we can
reject the received Data-OUT PDU safely.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb6d6988676080b458b31d12fef065f3c1de0cb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The hotplug lib can be used for pcie devices
such as nvme, virtio_blk and virtio scsi.
For the sigbus handler, there is only one in a
process and it should handle all the devices.
And align nvme to the hotplug lib
Add the ADD uevent support for allowing the
device hotplug.
Change-Id: I82cd3b4af38ca24cee8b041a215a85c4a69e60f7
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5653
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The old 1.2.1 version doesn't compile against latest 5.11.x kernels
(e.g. due to recent changes in include/net/xdp.h) so upgrade to the
latest compatible release.
Also, move the url to sourceforge since ice is released more often
there under e1000 project.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I08b7beae922addeb877fe321679151b02bd253db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7011
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Most notably, crypto/sha.h was split into two separate header files,
crypto/sha1.h and crypto/sha2.h.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I43ae61034f743bf4aae7f2f29919eec92d851f01
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Also fix the comment. It's never going to make sense to add a socket
to a group twice.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id4845b77114aef32bbe4ea0e53d2e1fde8e116f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7204
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I53ec43c62f5ab7bef2719119252eec3c7c6b90d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7269
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be useful as the same purpose as
spdk_io_channel_iter_get_io_device() and will be used in the
following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id45f5980c65543703b91df2afeb47448232fe503
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7237
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Moving nvme_ctrlr_depopulate_namespace_done() to common.c removes the
stub from bdev_ocssd_ut.c and will simplify the upcoming changes.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia94a88ca77518c7df08b52aa9298cdea5997ca1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7135
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_bdev_ns_to_bdev() was introduced because nvme_ns->bdev may be
removed to support multipath. However, it is unlikely now.
Hence it is easier to read to stop using nvme_bdev_ns_to_bdev() and
access nvme_ns->bdev directly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaf35455218761bafd03060a21110ad1c4098b1db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7098
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This change separates failover case more clearly, and will make
the following changes simpler.
Merge spdk_nvme_detach() and populate_namespaces_cb() into
bdev_nvme_add_secondary_trid(). Then change the return type of
bdev_nvme_add_secondary_trid() to void and move the comment to the
head of it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0eb706728cf1b9ad7031eb66e11880a47e2ba767
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7044
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Clean up bdev_nvme_add_trid() by factoring out comparison of namespaces
and comparison of trids into helper functions, bdev_nvme_compare_namespaces()
and bdev_nvme_compare_trids(), respectively.
Then rename bdev_nvme_add_trid() by bdev_nvme_add_secondary_trid().
Rename is for clarification and clean-up is for the next patch.
The next patch will merge spdk_nvme_detach() and populate_namespaces_cb()
into the renamed bdev_nvme_secondary_trid(). Clean-up makes the
next patch simpler.
One note is that checking if the type of trid is not PCIe is done
by holding mutex now to prioritize clean up.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idc8652329dd2c721d101a724ec1a57a66c4174a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7094
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Also, create a common dir which will hold symlinks to all existing
plugins used in the tests. Location of the actual lib is not changed
so the relation to the given test suite is clearly preserved.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icb70bbc61fbfa3325a357d5dd93f554ff132a3b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows to pass to rpc_cmd() sets of commands via stdin. E.g.:
rpc_cmd <<-CMDS
bdev_malloc_create -b Malloc0 32 512
bdev_malloc_create -b Malloc1 32 512
bdev_malloc_create -b Malloc2 32 512
CMDS
Since rpc.py is already running in a server mode, this is slightly
faster than grouping commands and running scripts/rpc.py directly.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I29fbcf3f2751400980d35b4de2cce2da1cd2bf2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unittest job is now split into three smaller jobs, each of them
requires unit tests to be built.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ibc0dfbf6f7395a9dfe23242b532fb5cb1f8dd8f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With this change, each polling group will use one
accel_engine channel. This change will be more suitable
to utlize the underlying accelerated device.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ibab183a1f65baff7e58529ee05e96b1b04731285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7055
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We only need to create an empty directory for vfio-user device,
the softlink isn't required anymore, so remove it.
Change-Id: Ie3f9ce73d287be3651f4ac06483888ac0f693700
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6954
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The following changes will require nvme_bdev_ctrlr_create() to be
asynchronous. As a preparation, merge nvme_ctrlr_populate_namespaces()
and populate_namespaces_cb() into nvme_bdev_ctrlr_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I623f927da072d746b4bd83314c0f5bcb9cc34ef0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7043
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The API spdk_nvme_ctrlr_free_io_qpair() returns immediately if the
passed qpair is NULL, but calling spdk_nvme_ctrlr_free_io_qpair()
with NULL should be avoided.
This patch cleans up the code to ensure that nvme_ch->qpair is NULL if
disconnected and spdk_nvme_ctrlr_free_io_qpair() is called only if
nvme_ch->qpair is not NULL.
Then add a test scenario that two reset requests were submitted
simultaneously and the first reset request failed and then the second
reset request also failed. This verifies the refactoring done in the
next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iae461f7f826b0e1a4607a17e528c04a642242d6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7041
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for zoned namespaces in the bdev/nvme module.
Query the namespace type, and if a zoned namespace is found, set the
bdev struct members needed by the bdev_zone.h APIs.
Note that while vbdev_zone_block and bdev_ocssd have zone locks,
bdev/nvme does not need any kind of zone lock, because NVMe ZNS
supports append natively.
The whole point of the zone append command is that you don't need any
locks, even when having multiple writers, since the drive will return
back the Assigned LBA where the blocks were actually written.
If a SPDK application will utilize writes instead of zone appends,
the SPDK application itself will need a per zone lock in order to
make sure that there is only one outstanding write.
Adding zone locks in bdev/nvme would reduce the performance of zone
appends, for no reason at all.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ibacdb9b6e839624aba869c9949231343db5914be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6911
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add support in bdev_zone.h for getting the maximum zone append data
transfer size.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I61203e64d51601232c6578a090fa52975364c1f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6910
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The specification for Maximum Data Transfer Size (MDTS) says this field
should include the length of metadata, if metadata is interleaved with the
logical block data. However, some drives can support MDTS without counting
the interleaved metadata, so for this case SPDK will only use data length
without interleaved metadata length.
Change-Id: I29920a25885699e2689be043b87122367be0e416
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Check test flags before calling rdma_device_init if
it's really needed, so that we don't call it when doing
TCP tests.
Change-Id: I2675a008cf84c7c4084cb83b44c279d2a497c3cb
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_mount - basic test verifying if setup.sh sees mounted nvme
devices (either partitions or the entire drive).
lvm_mount - test verifying if setup.sh sees nvme devices when
they are part of dm setup.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id250b4081b3e04a7f5b26401d2ae1b226fdb2d8f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5311
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
These tests are meant to "predict" the right number of hugepages
given setup.sh instance will set, depending on its environment
options (HUGENODE, HUGEMEM, etc.).
Change-Id: Iaf441e69d25dd59941891e1d5c3c2b0dbd77644d
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5309
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This is first commit from the series introducing funcrional tests
for setup.sh. Issues like #1689, #1691 showed that major changes
to setup.sh may result in quite unexpected behavior. thus to avoid
any regression, we should make sure the core of its functionality
is properly tested.
For now, only Linux systems are supported tests-wise.
The tests are explicitly run after all OCSSD are put into PCI_BLOCKED
to make sure they won't be picked up by the tests.
Change-Id: Iac036e693bdbaac476faea3d2128cf4d95434cb2
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5308
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some time ago Qemu submodules links were changed to
use https:// instead of git:// so there's no need
to sed this.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If4b16e7b887af5028d208498da8d81c2fa2101d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6847
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Fork needed to run Vhost tests using vfio-user.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iedfa85083e51c08592c9f512c6650415b49deda8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6846
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Add option to connect Qemu VMs to vfio-user sockets.
This needs additional option to vhost_run to run nvmf_tgt
instead of vhost binary (currently the only way to create
vfio-user sockets) and an additional function to find
connected devices in the VMs.
Change-Id: Iaae234a11f4431a307e1da9c9a2eee123290f5a3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use getopts instead of using positional args. This
will be needed in future commits when more optional
parameters will be added.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If575fd871f906de5f9d89b2f3972fa54e3208147
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK has added APIs for registering externally allocated
memory regions. Use them instead of doing our own thing.
We have to postpone spdk_mem_unregister call in
memory_hotplug_cb() because SPDK mutex (g_spdk_mem_map_mutex)
and DPDK mutex (memory_hotplug_lock) may overlap
and cause deadlock when one thread is calling spdk_free()
(locks memory_hotplug_lock first and then tries to lock
g_spdk_mem_map_mutex) and another one is calling
vhost_session_mem_unregister() (locks g_spdk_mem_map_mutex
first and then tries to lock memory_hotplug_lock).
Change-Id: I547b4ffc3987ef088a1b659addba1456ad760a71
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3560
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch really uses the accelrated engine.
Currently, we only offload the crc32c caculation,
but it can be extended.
Change-Id: If0e4c6a44b6e1e10e03f7eca355bed418d67326b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6760
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tools from this package are needed to handle the RPMs build.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I516341e0917998eae9c54d3194f1e091f4e5e9df
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6548
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Separate bdev_nvme_reset() and _bdev_nvme_reset() by making
bdev_nvme_reset() call _bdev_nvme_reset_start(), and then
remove the ctx parameter from _bdev_nvme_reset().
This clarifies the next patch and reduces the size of the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I76b0f2f5b83445845a313203e594dca0be150bc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6949
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The recent refactoring removed the destruct poller and change the
reset processing to destruct ctrlr after its completion by conditionally
sending message.
But differentiating callback function is difficult if we reset multiple
ctrlrs.
If nvme_bdev_ctrlr->destruct is set, any new reset cannot start. So we can
use an new variable and always execute the callback function.
Add an new variable pending_destruct to struct nvme_bdev_ctrlr, and set
pending_destruct if ctrlr->ref is zero and ctrlr->destruct is true, and
then start destruct ctrlr if ctrlr->destruct_after_reset is set after
clearing pending resets.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9f34c42a40c5a5da54611e7871aef8c58117a56a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6714
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The following patches will cache and use spdk_nvme_ns pointer rather than
nvme_bdev_ns pointer in I/O paths. As a preparation, change a few cases
to get spdk_nvme_ctrlr pointer from spdk_nvme_ns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ief5f01f85f46e2ad822af5b5abb13a14f28a0c6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6834
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When there still exists any NVMe bdev, if the bdev subsystem starts
shutdown, spdk_bdev_unregister() is called first. To avoid regression
for this scenario, add a test case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f484bda2ee2f3eaca364968a79ec7bf50267980
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6936
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Although this is not a mistake, it's better to add a semicolon to
be consistent with other DEFINE_STUB.
Change-Id: I5953b4612659d4115cb7735b1617eb8c13400798
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The NVMe Zoned Namespace Command Set Specification has, in addition to a
Max Open Resources limit, a Max Active Resources limit.
An active resource is defined as zone being in zone state implicit open,
explicit open, or closed.
Create a function spdk_bdev_get_max_active_zones() in the generic SPDK
zone layer, so that this limit can be exposed to the user.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I6f61fc45e1dc38689dc54d5649c35fa9b91dbdfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6908
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The latest QAT driver version which we support attempts to define
pci_cleanup_aer_uncorrect_error_status() whenever <= 5.7.0 kernels
are detected. However, in case of centos8, the latest 4.18 build of
the kernel which is available there includes patches which completely
removed use of this call.
To make sure this function is not built into the driver, apply the
patch on top of QAT which will remove this definition entirely. This
patch is meant to be applied only in case <= 5.7.0 kernel are picked
up and which are missing pci_cleanup_aer_uncorrect_error_status()
symbol definitions.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ieb09d5a1dc8936d6e266c6cadfdf9d70620a3bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Purpose: To setup an accelerated function callback
for created spdk_nvme_poll_group. In this patch,
we just create the interface. The real usage of this
call back will be provided in the other patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I0d936aa4eba4dbfcc0137942156b9f2919eb5b78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6758
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There was no unit test for bdev_nvme_get_ctrlr().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia69f0afdba2d3fb31bc38526834edcfc56a69c71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Previously, not nvme_bdev_ctrlr but spdk_nvme_ctrlr pointer had been
passed to spdk_get_io_channel() in nvme_rpc_io_cmd_bdev_nvme().
There was no unit test for bdev_nvme_get_io_qpair(), and so add
unit test for it to guard us from degradation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I00fdc14ea6467162c5fb90d04389883d7c409a17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6920
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_bdev_io_complete_nvme_status() had set the bdev_io status to
NVME_ERROR even if it is aborted, i.e, sc is ABORTED_BY_REQUEST.
Fix it to ABORTED, and verify the fix by unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b22547105a6d7986747053f93875854336959b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6884
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add test cases for abort request. Both success and failures cases
and both NVMe and admin request cases are added.
The next patch will fix a bug that the status of the bdev_io which
was aborted was set to SPDK_BDEV_IO_STATUS_NVME_ERROR. The status
should have been SPDK_BDEV_IO_STATUS_ABORTED.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4fa885b874507e1a4cf9d70f45e37c4aaef2134a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6883
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Add test case for admin command passthrough to test redirection
of completion processing.
Change the type of opc to uint16_t to cover admin commands.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id01cb924e7778878dcfaf8766b05af1ae52623eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6882
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
This is done in order to easier troubleshoot issues like #1784.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icabccab92dd48aa85a505d34013181e66c89fa1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6800
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Proper configuration file was already read in line 20,
where it's path is passed as required first argument.
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I0523bd6d5ad764c13d900c4bd788a5695095c11e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6830
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The e2edp test `dp_with_pract_test` includes code to modify the data
length if the size of metadata is 8 bytes, but fails to set
req->use_extended_lba if we actually need to pass an extended LBA
(md_size > 8).
Similarly, the `dp_guard_check_extended_lba_test` miscalculates the CRC
when md_size is > 8. The CRC must be calculated over both data AND the
first md_size - 8 bytes of metadata.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Change-Id: I5252c1fe02908745d6aa68799859ed85f32e87ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make stub for external APIs, cases for getting lkey
and constructing ctrlr.
Change-Id: I1b453139e98b297616d839de66690947c6f19738
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6529
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I474b6c9ac755626958bc51f491f0ce2dc63a0475
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
!Do not merge this patch before RocksDB patches are merged:
https: //review.spdk.io/gerrit/c/spdk/rocksdb/+/6485
https: //review.spdk.io/gerrit/c/spdk/rocksdb/+/6486
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie13ff102ddf627026013dcb8b41cb3ee205eaaeb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is an internal API used in several places. The call can fail, so
make sure it can report that correctly.
Change-Id: Iac0ed2c8299c9dd3d2556070278a2224c3807b7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
include test_nvme_ns_set_identify_data,
test_spdk_nvme_ns_get_values(Most functions that simply get values),
test_spdk_nvme_ns_is_active,
and spdk_nvme_ns_supports(Judge whether extended_lba and compare are supported).
The above func is completed.
Signed-off-by: ChengqiangMeng <chengqiangx.meng@intel.com>
Change-Id: I916173a195692045ee0ee3fa408a1696e0eb5b1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Add mutex per nvme_bdev_ctrlr and replace g_bdev_nvme_mutex by it
for possible cases. These are just drop-in-replacement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib1d5eebd65e514cfe96ad60a9004d9bace7b4f6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6693
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make us easier to maintain the operation to delete
nvme_bdev_ctrlr and its trids. The added unit test cases guard us
from degradation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I400d4092020e89bacaebc7be045a456b8760ed8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6688
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will refactor bdev_nvme_remove_trid() and merge
it into bdev_nvme_delete(). Add test cases for bdev_nvme_remove_trid()
to avoid degradation by the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I42da17c62843ead9a30ab9a06463df4b679e561d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
spdk_bdev_part_base_construct() is deprecated so this patch
moves remaining instances to spdk_bdev_part_base_construct_ext().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iccd4b15933bec41885adfaf4fc4ce2abedd2d6c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6627
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Leverage SO_INCOMING_CPU to get the CPU affinity of connections
(sockets). And allocate the connections to specific poll groups,
which aims to utilize cache locality.
From our test:
6 P4600 NVMe on target,target uses 8 cores, NIC irqs are bound to
these 8 cores, and initiator side uses 24 and 32 cores,
we can get 11%~17% randwrite performance boost for posix, and 8%~12%
for uring.
Change-Id: I011e0a21502c85adcccd4a14fbe9838b43f54976
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5748
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Because of recent changes in RocksDB Makefile we cannot
use absolute path during its build any more. Change it
to relative path.
RocksDB Makefile change:
80f71b5863 (diff-76ed074a9305c04054cdebb9e9aad2d818052b07091de1f20cad0bbac34ffb52R463)
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3a4fd010b2d9d8eb0dd3b7bf159d582aa5032669
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
These tests compile the driver both as a shared object and statically
linking it to the identify application. Additionally, in both
configurations, the app is used to list all available NVMe controllers,
as well as print information about each one indivdually.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I127caf08acad11241bf685b392617ab4b810226b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6680
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Replaced the "_tc[0-9]+" suffix with a more descriptive title describing
the test case being executed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id1c2f6dcf155d8ae99dc490983ab4bb1451bfefd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6764
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Removed the PCI_ALLOWED="NONE" line from setup.sh calls to bind to all
available PCI devices. It'll allow the out-of-tree NVMe driver tests
from the following patch to execute properly, as they require NVMe
devices to be attachable from SPDK.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I56e89a6b853f02343803bb6ec704ea3c0a8bd12f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6679
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
