The NVMe submission queue head wraparound point can be determined in the
generic NVMe over Fabrics layer; it should not be using the RDMA
connection queue depth.
Change-Id: I9da8f09e4f057f8fdc1ff4c6cc5f48cea7123e11
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is useful for holding session-wide buffer pools.
Change-Id: I7024da24b210a2205bf1e159d5935e0093b81120
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These don't actually work quite yet, but pipe the
configuration file data through to where it will
be needed.
Change-Id: I95512d718d45b936fa85c03c0b80689ce3c866bc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This can be used to release requests that don't
require a completion to be sent.
Change-Id: I8fb932ea8569bf3c45342d9fa4e270af5510c60c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The NVMe over Fabrics 1.0 spec corresponds to the NVMe base spec version
1.2.1, so we should pretend to be at least that new.
Change-Id: I36fc44c780de01d6c666e87b803cd47dba0e74c5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the ctrlr and io_qpair out of spdk_nvmf_subsystem, package them
as a new data structure. Union the direct and virtual mode namespaces.
Change-Id: I839aee3372c6c57aa03a0be76f8aaeb5045ecdaf
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
CAP.CQR indicates whether contiguous queues are required; this is
meaningless in NVMe over Fabrics, since queue creation is handled
implicitly for each connection, but the spec requires it to be set to 1.
Change-Id: I6b05954eefa6928beecd7a640bbbdbd835c6b69a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the size of the applicable structs directly.
Change-Id: I4a65de548d409c9962b11a75d3fde2bfe434a3ec
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This logically belongs inside the session handling code, not
in the transport-specific layer.
Change-Id: I93b2271f38dbfc742162c98c40acb153c7e9022a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Temporarily set the in-capsule data size to the maximum data transfer
length. This should actually be updated by the transport layer, but for
now, the only transport (RDMA) supports the full bounce buffer size.
Also drop the check that prevents admin connections from using
in-capsule data; the host may send in-capsule data for the Connect on an
I/O queue, and we don't know the type of connection until after Connect
is processed.
Fixes: 828dca7 ("nvmf: Move some stray session init code to the right place")
Change-Id: I369ee5497247d7e875ad0b6f0aaf6c47c1d3887c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe spec requires that the I/O queue entry size values in CC are
set before any I/O queues may be created.
Change-Id: I4f0c9a9c20411223d281993745c85a8431197961
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Track each individual bit in the Set Property handler for CC, and fail
the request if any unhandled bits are modified.
Also add handlers for IOSQES and IOCQES (I/O submission and completion
queue entry size).
Change-Id: I374dc3c15197e029ba07fd9ee1cff0e38a0a884d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is not implemented yet, but add a message to remind us to write it
later.
Change-Id: Ic1c35a0d35f728bc63b38c334d9c622493bee967
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Property Set of CC.SHN is not supposed to terminate the session - remove
the commented-out code that was attempting to do this.
Change-Id: I1db230df9be549764287a8fd45ccdebea1d22a8b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Set CSTS.SHST = 10b to indicate that shutdown is complete, and
CSTS.RDY = 0 to match the state of CC.EN.
Change-Id: Ia651c34427526a38f22cba3910df2cf7d4bedd92
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These NVMf spec structure definitions are the same as the equivalent
NVMe structs.
Change-Id: I21c45973b7843e3767c48f97ec42e7b446df296f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There was only one function and a structure declaration
left.
Change-Id: I63277b4182120e7a76a925ed0bf7378ec7c23f20
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These can be simplified and merged into the subsystem.
Remove the concept of mappings from subsystems and replace
it with a list of hosts and ports. The host is optional -
not specifying a host means any host can connect.
Change-Id: Ib3786acb40a34b7e10935af55f4b6756d40cc906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Make the core NVMf to transport interface generic and allow for multiple
transport types to be registered.
Change-Id: I0a2767a47d55999c45f788ae1318bb50af60ab4e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Set a status code in the response capsule for each possible error case.
Also enforce CC.EN == 1 before I/O connect.
The NVMf spec requires that the controller is enabled before any I/O
queue Connect commands are allowed.
Change-Id: If56d6b4d6bedad00e9e845e77f05f715e3969f8b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the only file that calls it, so it can be static.
Change-Id: I47573b7b38b40ad37e758234245eedbe94ae0a12
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The whole cleanup process is now started by
spdk_shutdown_nvmf_subsystems(). Each subsystem will clean up its
session, if any, and each session will clean up its connections.
Change-Id: I9915d4547751ed4ffc4baa2c45c628698dd0b881
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is only one controller per subsystem, so therefore
there can be 0 or 1 sessions. Change the list of sessions
to a pointer that can be NULL if no session exists.
Change-Id: I2c0d042d9cecacae93da3e806093faf0155ddd6e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Subsystems only have one controller, so cntlid
is always 0.
Change-Id: I690a1793ad3a696adbaefca856e559dd0177b11a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was intended to track the number of NVMe device
queues per session, but there is only one hardware
queue per session. It was conflated with the number
of RDMA queues in several places as well.
Change-Id: I74a1c56a5d395dea8bee4778882821e904cebcf9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Everything can be done when the session is created.
Change-Id: I7cb38c093b2b1b69460cabba465828eed0cec432
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The cntlid is inside the session, so no need for
duplicate data.
Change-Id: I5669ee6393807959506dfec36a7583af77386fc4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
A connection function was initializing some session data, so
move that code to the function that initializes the session.
Change-Id: I5f2d4349585cb97985a7bbd9fb8d6c66eeaa7d4e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
There was an extra layer of indirection complicating
things for no reason. This removes it.
Change-Id: I8d4e654eb17f8f6ec028d775329794f0745fb0f7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
NVMf does not have the concept of subsystem groups; the (former)
subsystem_grp files really contain structures and functions related to
individual subsystems.
Change-Id: I4b3a64de799fffb29f8685ea4908d754516815cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Create a list of valid properties with get and set callbacks (set is
optional to allow read-only fields).
Remove handling for fields declared as "reserved" in the NVMe over
Fabrics 1.0 specification.
Also simplify the vcprop structure to only contain the required fields.
Change-Id: I14d3ddfd008c62b75fce8e64d193c87fb6f7b5ad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Multiple NVMe controllers within a subsystem does not work correctly,
since we would need to virtualize the controller data, namespace IDs,
and so on. For now, only allow pass-through mapping of a single NVMe
controller per subsystem.
Change-Id: Ib2d3576d2856c46a086f38eb6bec56f3e7a73575
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we used cap_lo and cap_hi to represent the 32-bit halves of
the full CAP register. However, it is simpler to keep them in a single
64-bit structure, and is no less efficient on 64-bit platforms.
Also name the NSSRS field from NVMe 1.2, which was previously reserved.
Change-Id: I1d5d9b0dccbb12373b4aed3db29c883881d43223
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The function call of spdk_nvmf_check_pools can be
directly put in nvmf.c.
Reason: This pool is created by nvmf subsystem,
it should be recycled by this subsystem.
Change-Id: I49e49bcb56079fc25d26b1f5078a1808c2f8e189
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Also finish up the req_state -> req conversion.
Change-Id: I131dd52dcd36a790b942e06f0207a3274cc04ffc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
They each only had 1 function left that belonged
in the session.c file.
Change-Id: I405902b02e9316d2dc02d3732d8bc085c2b84d31
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This moves some definitions from nvmf_spec.h to
nvme_spec.h based on the latest publication.
Change-Id: I51b0abd16f7d034696239894aea5089f8ac70c40
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
