When doing controller reset and shutdown, we may change the
CSTS.RDY and CSTS.SHN even there are pending IOs in the IO
queues, so here we add a timer in the reset and shutdown
callback, it will change the status when there are no
connected IO queues.
Fix#2199.
Change-Id: I3a54d30b257973661b269ad5e37637490f9390f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9908
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK nvmf target reports all listeners on all subsystems
in discovery pages, kernel target reports only subsystems
listening on a port where discovery command is received.
NVMEoF specification allows to specify any addresses/
transport types. Ch 5: The set of Discovery Log entries should
include all applicable addresses on the same fabric as the
Discovery Service and may include addresses on other fabrics.
To align SPDK and kernel targets behaviour, add filtering
rules to allow flexible configuration of what should be
listed in discovery log page entries.
Fixes#2082
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie981edebb29206793d3310940034dcbb22c52441
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9185
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The qpair's state member is only 3 bits of a uint8_t,
and the in_completion_context bit is another bit in that
same uint8_t.
We know that the qpair's state is only ever updated by
one thread, but it is possible that the state could
be modified by one thread, while another thread
is modifying in_completion_context.
in_completion_context is only modified by the thread
that is polling the qpair (or the qpair's poll group).
But with async mode, another thread that has a qpair
on the same PCIe controller could poll its adminq and
reap the SQ completion for the qpair that's owned by
the other thread.
So do *not* set the generic qpair state to CONNECTED
from the SQ completion callback. Instead just set
the pcie_state to READY, and let the thread that owns
the qpair detect the qpair is READY and set the state
to CONNECTED itself.
Fixes issue #2157.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9efc0c954504f1841e1c3890ae78211ad0d1990e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9975
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
This reverts commit 3b1f13ef29.
It seems like this particular commit is causing failures on the
CI side related to the following issue:
https://github.com/spdk/spdk/issues/2214
Reverting for now to make the CI stable.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7f32c612b8549477de0b9079d114cec4ec9bda59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9986
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is a race condition between controller destruction and
subsystem state change, e.g. admin qpair may already be freed
when a namespace is added or removed. As result in function
poll_group_update_subsystem we may get heap-use-after-free error
Another problem is that some qpair's live time may exceed controller's
life time. To avoid it, start controller destruction process when the last
qpair finished the disconnect process (previously controller started
the descruction process before the last qpair starts to disconnect
and it could lead to raise conditions)
Fixes#2055
Change-Id: I11612979eb914a5fdcc7b9e3c812bf1e450b6120
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8963
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Matt Dumm <matt.dumm@hpe.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some of our tpoints have a name exceeding 24 characters.
Althought this is not problem for SPDK, it might cause
confusion, because error messages are printed.
Tpoints regstered inside fc.c had their _REQ_ part removed,
since it was used in all of them.
Fixes#2208
Change-Id: I598eb9c1d252d8ca6c83f82e564a6b53037936f4
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9963
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
DPDK will report error when detaching the PCI device in secondary
process, because SPDK will return -1 in `pci_device_fini`, so
here we will reset the `attached` flag before that.
Also return the errno instead of -1.
Change-Id: I3efa4d97ceab504215faeb9d3d80a694bdd6014c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7944
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
When intr mode is enabled, it will be common that
poller is unregistered during interrupt processing.
Since poller unregister is a delayed operation,
mark it in spdk_thread object, and reap unregistered
pollers out of poller execution.
Fixes#2143
Change-Id: Ieb61fc7685f85af5c15e833dd1dd56f8c97a3b12
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5770
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch makes use of the changes from previous patch and to
show connections between bdev events and tcp events.
Change-Id: If28c256d74a9a5d581ee4d8292a08fc061fee968
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9622
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Currently we do not have any way to connect traces from different
modules in SPDK. This change modifies our trace library
and app/trace to handle adding relations between trace points
and a trace object.
Additionally this patch adds classes and fields to structs
inside trace.py to prepare it for future patches implementing
printing relation information.
Change-Id: Ia09d01244d923957d589fd37e6d4c98f9f7bbd07
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9620
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
There could be an outstanding for_each_reactor operation
in progress when the application shuts down. If we don't
wait for that operation to complete, we'll get a memory
leak for its context.
So when stopping the reactors, before setting the
state to EXITING, do one final for_each_reactor to
ensure any outstanding for_each_reactor operations are
flushed. Once this final for_each_reactor operation
is complete, we can set the state to EXITING safely.
Also use a global mutex and flag to ensure no more
for_each_reactor operations can start while the final
for_each_reactor is in progress. If a new operation
is requested, we'll just ignore since the reactors are
shutting down anyways.
Fixes issue #2206.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d86eb3b0c7855e98481ab4164af82e76c009618
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9928
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
nvmf_ctrlr_cc_shn_done() and nvmf_ctrlr_cc_reset_done() are
almost same, so consolidate them together by adding a flag.
Change-Id: Ib7714d31a40f9d8d344ec2630c083c5d76dac8a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9907
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Currently either HW Engine Channel or SW Engine Channel will be used.
In the case that HW Engine Channel is used while does not support related
operations like IOAT for CRC, it will shift back to the SW Engine's handle.
So that this is an issue that it still refers to the HW Engine Channel
while needs SW Eninge Channel to handle.
This patch introduces the SW Eninge Channel and always initializes there
in case that HW Engine does not support some operations.
Related UT also added to simulate the case the IOAT does not support CRC
and then SW Eninge needs to properly handle it.
Change-Id: I4ecdcd09ab669a616b37c567b45b1e6499800ec9
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
In some cases a single virtually contriguos memory
buffer can be translated to several chunks of memory.
To make such translation possible, update structure
spdk_memory_domain_translation_result to use a pointer
to iovec.
Add a single iov structure or cases where translation
is always 1:1, it will make easier translation callback
implementation. For RDMA transport translation of address
is always 1:1, so treat iovcnt other than 1 as an
error.
Change-Id: I65605575d43a490490eba72c1eb19f3a09d55ec6
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9779
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of a union with domain type specific
parameters, store an opaque pointer to user
context. Depending on the memory domain type,
this context can be cast to a specific struct,
e.g. to spdk_memory_domain_rdma_ctx for RDMA
memory domains.
This change provides more flexibility to
applications to create and manage custom
memory domains
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Change-Id: Ib0a8297de80773d86edc9849beb4cbc693ef5414
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9778
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Push operation complements existing pull
operation and allows to implement read data
flow using memory domains.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Change-Id: I0a3ddcb88c433dff7a9c761a99838658c72c43fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9701
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's too strict to fail the controller when there are no free requests.
Change-Id: I0a66ff2d294a2fd9326506ea50af4213aaaf8e92
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9848
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
We already support Set Features with Host Behavior, so here also
add the support in Get Features.
Change-Id: I27d973e81fd6be89cc67ad559439334fc1087c9e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
nvmf_subsystem_get_qpairs RPC handler may cause the program
could not exit normally (e.g. ctrl c). Reason is that,
spdk_get_io_channel() will be called during the getting
qpairs stream, which will add refcount value for each
existing channel. When end target, channel cannot be
destroyed since refcount be added additionally and
its value could not be subtracted to 0. As a result,
the program will hang in the process of exiting.
So here we don't need to allocate a new channel, just use
the exist one.
Signed-off-by: zhaoshushu.zss <zhaoshushu.zss@alibaba-inc.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I08b4678edaa9404b8e8af125ebae572b31edf77e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9881
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- remove metadata updater
- handle 'zero' flag in mempool allocator
- adapt ocf_mngt_cache_start() to new OCF API
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: I34afd856cc1306ffe305f71a445e7474c9b0a2d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
OCF requires separate mempool for each request size from rage 4k-128k. Mempools
are meant for both IO and OCF's internal requests.
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: I3b37d287bbd6f963a24007c8485002f414fb8a7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adds context to currently existing traces inside bdev.c file.
These are going to be used later to match with traces from
nvmf layer to enable io tracing.
Change-Id: I599a60412f39144cdd306315a184b2000a61286e
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9497
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
This is to help with binding trace objects together and
for the convenience (all trace definitions are in one place
instad of being scattered accross multiple files).
Change-Id: Ib15bc9c2eeee9c4d0816bcee509ab69f3f558e19
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9574
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Enable tracing of tcp qpairs in lib/nvmf/tcp.c.
Change-Id: I692e74a972dcddd0bff193f1703470926e28b4db
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9288
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
This change aims to help with tracepoint handling in the future.
Instead of printing each trace directly with given values, we
will use this function to pass status change value.
Change-Id: Icc7f2863703899f818f0a2d5f49b69aa4e26a62c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9690
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
The new name suits better to the following "data push"
operation
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ic3249f65de203f375477f8e87b0749b9502d165c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9878
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For GET/SET FEATURES command, some feature IDs will have data buffer
while some don't have, so here we will return the buffer length base
on the feature ID. The length is defined by the specification.
Change-Id: Ie9798585fc74544b77998aeebc2a20614c1c25f0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is a bit confusing for the variable names to not match
the parameter names for spdk_bdev_io_get_nvme_fused_status().
These changes should make it a bit simpler to understand.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I833bf2a75cfec7b86da2d8a234f800de3510c2b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9867
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add the paired spdk_json_write_named_uint8|16 function
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ib7ee9ae4dbe9a4e9cfa28750f0b9a0af597d260c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9788
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous patches (5363eb3c) tried to work around the
32-bit unmap and write_zeroes LBA counts by breaking
up larger operations into smaller chunks of max size
UINT32_MAX lba chunks.
But some SSDs may just ignore unmap operations that
are not aligned to full physical block boundaries -
and a UINT32_MAX lba unmap on a 512B logical /
4KiB physical SSD would not be aligned. If the SSD
decided to ignore the unmap/deallocate (which it is
allowed to do according to NVMe spec), we could end
up with not unmapping *any* blocks. Probably SSDs
should always be trying hard to unmap as many
blocks as possible, but let's not try to depend on
that in blobstore.
So one option would be to break them into chunks
close to UINT32_MAX which are still aligned to
4KiB boundaries. But the better fix is to just
change the unmap and write_zeroes APIs to take
64-bit arguments, and then we can avoid the
chunking altogether.
Fixes issue #2190.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23998e493a764d466927c3520c7a8c7f943000a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9737
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
seems it is not required, string is used instead enum
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ic67af6cfa6f8e22a6593f904cd5b5c1b51cae6ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9623
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously we decided which LUN format is used by the macro constant
SPDK_SCSI_DEV_MAX_LUN. However, as long as we read SAM, the LUN format
can be decided per LUN ID.
Linux host SCSI driver supports 256 LUNs per SCSI device at the
maximum. So we cannot test this fix on any actual system but we
apply this fix for the potential future cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifa6a3b66431f5e1eade326348dd99b8b9653408b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9664
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most SCSI hosts, Linux, Windows, VMware, supports 256 LUNs per
device now, and it is not easy to test even if any other non-free
OS or driver supports more than 256 LUNs.
Hence increase the macro constant SPDK_SCSI_DEV_MAX_LUN from 64 to
256. Then we do not need to expose it publicly now. So move it to
lib/scsi/scsi_internal.h.
Update the CHANGELOG together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iacde46c3854f326eebfb8befb47d41fce383b027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9631
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change a fixed size array to a linked list to manage LUNs per SCSI
device.
Keep the linked list sorted by LUN ID because this is necessary to
efficiently find the lowest free LUN ID or check the specified LUN is free.
To avoid traversing the linked list twice, change scsi_dev_find_free_lun()
to return the LUN which comes just before where we want to insert an new LUN.
Additionally, previously spdk_scsi_dev_add_lun_ext() had not checked if
the specified LUN ID was duplicated. Fix the bug in this patch.
Add unit test cases for the function scsi_dev_find_free_lun().
These changes will enable the following patches to increase
SPDK_SCSI_DEV_MAX_LUN from 64 to 256 without consuming additional memory.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7f6f070ddc680127cf86ae255055da2d1d29e4ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9630
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the same effort as lib/iscsi.
By using spdk_scsi_dev_get_first_lun() and spdk_scsi_dev_get_next_lun(),
remove the dependency on SPDK_SCSI_DEV_MAX_LUN from lib/vhost.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib79d2c3f8e7a5027d3d2c03f8f886c588b86009b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9611
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use two new public APIs spdk_scsi_dev_get_first_lun() and
spdk_scsi_dev_get_next_lun() to manage iSCSI LUNs by linked list and
to traverse all LUNs of the SCSI device.
By these changes, we can remove the dependency on the macro constant
SPDK_SCSI_DEV_MAX_LUN from lib/iscsi.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3237e7f887dd761d6812ed4313f87b6e7884ea29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9610
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By this change, we will not need to traverse LUN list or tree in the
callback to hot remove.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibe72fba824553d0189b9120884aa2113599a568d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9627
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is an effort to remove the dependency on the macro constant
SPDK_SCSI_DEV_MAX_LUN from lib/iscsi.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieeff4136b16cc6bfa92614248f150bc9dfe3dc74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9609
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Add two public APIs spdk_scsi_dev_get_first_lun() and
spdk_scsi_dev_get_next_lun() to remove the dependency on the macro
constant SPDK_SCSI_DEV_MAX_LUN from lib/iscsi and lib/vhost.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6546697f823fe9f4fa34e1161f5c7fa912dd2d59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9608
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The spec treats the sizes (MQES or qsize from create/delete
IO queue command) as a 0-based value of uint16_t, but vfio-user
treats them as 1-based value, so we need to use uint32_t to
make sure the value can't overflow. The same for NLB(number of
logical blocks).
Change-Id: I7654b7e12234525c0fce78a713dd50097e9b3d58
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9632
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function is used to check the IO SQ or CQ exists or not,
so return bool type is better and also rename it.
Change-Id: I1af2a25255b012dcf1e1952b828617ededf9b897
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9680
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Andreas Economides <andreas.economides@nutanix.com>
Previously vfio-user will hit an error when creating a deleted IO SQ.
For lookup_io_q() function, actually we should not use the queue's
address to check the queue is exist or not, as when there is a memory
removal, we will also set the queue's address to NULL and reset it again,
so here we use the queue state to indicate the queue is exist or not.
Fix issue #2174.
Change-Id: I56bdd63947c2b30a598c427e64ff2dafe1cc1d2e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9605
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prior a regular round robin could result in strange performance
if an idxd device from another socket was used.
Signed-off-by: peluse <peluse@localhost.localdomain>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Id863c79067beabe73ef89d92b3fb3c436821b97a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
