Wrong opcode was used when deciding whether a dst buffer is needed
or not. Also on freeing we were freeing src instead of the vector
parts of the task.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I33eb9408ee20eca6c44911b4567d0367528347de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9189
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Previously the accel_perf tool would look at whether it had HW
or SW commands to know whether to execute the callback right away
or schdule to avoid blowing the stack (SW calls are sync).
Moved this to the SW module (part of the accel engine) so the
caller doesn't have to worry about. Allowed for a few simplifcations
in the tool as well.
Also, instead of using send_msg to call the completion we add it to
a list in the sw module that a new poller uses to perform the
completions as this is more efficient the sending a message to the
same thread.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ifc6c5b8635f51e3fa1a825c8573378b3752d7d91
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9171
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
MD025 - Multiple top level headers in the same document
Fixed all errors
Update check_format.sh to fit new header style in jsonrpc.md
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib5f832c549880771c99c15b89affe1e82acd3fa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9045
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In accel_done function, we use g_using_sw_engine to
determine to directly call _accel_done or use thread message
passing way.
However when we get the capability and determine the
value of g_using_sw_engine in mulitple cases. We do not
protect the value of g_num_workers. Then if we use CPU mode
to do test, g_using_sw_engine will not set to be false
in racing condition. Since the value of g_num_workers can be
> 1 when we do the check, i.e., it is a TOC2TOU issue.
The solution is that we check the g_using_sw_engine in
accel_perf_start function.
Fixes issue #2084
Change-Id: I55c18e0443120adb698d5bd27d4522df09f6dcab
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9151
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This abort test app will send a lot of abort commands on
the admin queue. The default admin queue size is
relatively small (32) so increase it if necessary to
account for the expected number of outstanding abort
commands as well as any extra admin commands that may
be sent during test execution such as Keep Alive.
Fixes issue #2048.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5f64b7fc72a028299b860f09e30d430a64c95d2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8812
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The --io-pattern option can be specified by the -w short opt. However,
the help message suggested that -o should be used. This fixes it.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Change-Id: I023d571fc3b165653257688fdbd7b1eeafd420e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9116
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
MD002 - First header should be a top level header
Fixed all MD002 errors
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Change-Id: Id0cb693c18f3e26556949ba2220db7b25e9edbe1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8940
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This parameter is still part of API spdk_sock_impl_opts
structure but it is not used. Keep it to support ABI
compatibility since it is located in the middle of the
structure and removing it may break socket opts initialization
or parsing.
Change-Id: Ib641ad7d965d68bc9ebb65dba531408d88cf6fa1
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8914
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For all CRC related functions. Does not need to be DMA'able memory
as DSA returns the CRC to it's completion record and the lib
copies it to this address. Done for consistency as this element
was added as part of adding the copy+CRC API.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Iefedcbc0a1c4e211eeb8aaf5c52f2881e9173bad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
For COPY+CRC operations, we allocate a destination buffer for each
task that's big enough to hold the copied input data for all stages
of the chain. For example, if the operation is 4 stages of 4K input
buffers, the destination will be 16K in size.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id32a98c1dbada2881a8423c050e892d5c37bf6cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the same fix as done for lib/nvme.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9ca5e1ea9dbdba45b51b311e9a36f278b1b62770
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8437
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When the application is not set with the interrupt mode,
we should fail the rpc.
Fixes issue #2023
Change-Id: I4157f220948b7c96f474682c41ac9d78977b1c40
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Now that we've deprecated the RPCs for a release, we can remove the whole
library.
Change-Id: I0f1a357fcfb3404efac39aa021928841c2f22ff1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Bit 1 in the CMIC of the Identify Controller Data Structure specifies
if the NVM subsystem may have multiple controllers or not.
However, multi_host indicated a particular use case such that the NVM
subsystem is used by multiple hosts.
multi_ctrlr will be more appropriate.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0246096a5cc44721aeff3ff6f96473a2abe11964
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8719
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If perf is connecting to a subsystem with listeners
of different transport types (e.g. TCP and RDMA) and
the user request a specific trtype via CLI (e.g. TCP),
discovery process will call probe_cb for every transport
type. As result, probe_cb in perf will return `true`
and undesired controllers will be created and used in
IO path.
This patch adds a check for trtype and trstring to ignore
controllers that are not of a requested type.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Id87afd03c7b38edfbbfecb5ad2239fe3e9ac9f83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Faced the following warnings during the compilation:
accel_perf.c:222:17: warning: ‘argval’ may be used uninitialized in this function [-Wmaybe-uninitialized]
222 | g_crc32c_seed = argval;
And this patch can be used to fix this issue.
Change-Id: I84ee542d629ff5d9e6a2873c0035bea81b376150
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8538
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Chengqiang Meng <chengqiangx.meng@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We can add one or more ctrlrs to the existing detach context even
after polling started as long as spdk_nvme_detach_poll_async()
returns -EBUSY.
By relying on this update, add a global variable g_detach_ctx and
use it to aggregate multiple detachments.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I28dcfa41daf1fe2bbe76fac80e1bc2abc24751f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add a new function spdk_nvme_detach_poll() to simplify a common
use case to continue polling until all detachments complete.
Then use the function for the common use case throughout.
Besides, usage by simple_copy application was not correct, and
fix it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic14711cd8478bf221c0fe375301e77b395b37f26
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For benchmarking purposes, we may want to use a
relatively low queue depth but spread the operations
across a wider range of memory. A new -a option is
added where the user can specify an "allocate depth"
to do exactly that. In this case, more tasks (and
their associated buffers) can be allocated than we
have actual queue depth. Then when we pick a new
task for the next operation, it will use a different
memory range and avoid always using the same buffers
over and over again.
If not specified, we just allocate the same number
of tasks as the queue depth, which is the current
behavior.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I78042d905fd49d130c4a318e2c19eb11b84ff726
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8451
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When a task completes, always put it back in the task
pool (using TAILQ_INSERT_TAIL) and then use _get_task
to get a task for the next submission. Currently this
will just allocate the task that was just put into
the TAILQ. But an upcoming patch will allocate
more tasks than we have queue depth, and this patch
will ensure all of those tasks get used evenly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia6247a76ba60337fe6da3189e6c305f4dfb0a041
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Previously we would only assign the worker in _get_task().
But future patches will use _get_task() for each I/O,
not just during startup.
Also increment the current_queue_depth during startup
only, rather than every time _get_task() is called.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2713591d36b8353eaab8119ee230261f40857019
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
The .get_zoned_model() callback is supposed to reject unsupported
file types. Right now, we do not reject unsupported file types.
For our specific ioengine, this isn't strictly needed, since our
ioengine unconditionally sets f->filetype to FIO_TYPE_BLOCK, and if
it fails to find a SPDK bdev that matches the --filename, it will
return an error that it couldn't find the bdev matching filename.
However, all .get_zoned_model() callbacks in the fio in-tree ioengines
have a check that a given file has a file type that is supported by
the ioengine itself. This is needed since they do not set f->filetype
themselves, but instead let fio generic code initialize f->filetype.
Since we reuse --filename to mean something in the SPDK namespace, we
are force to initialize filetype manually. So that is the only reason
why we know that the file type will be FIO_TYPE_BLOCK. Anyway, let's
try to keep our code as similar to the in-tree ioengines as possible.
The SPDK nvme ioengine already has this check, so adding it in the
SPDK bdev ioengine makes our ioengines more consistent as well.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ib5e19c738dea0f8d41641b63d0fabe055a930827
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8329
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
fio will do certain actions depending on the backing file
type of the target that it runs against.
(E.g. if the zbd code in fio detects that the backing file
is FIO_TYPE_FILE, it will emulate zones inside the regular
file.)
Both SPDK ioengines reuse the filename option to not point
to an actual path exposed by the OS, but to instead point to
a device in the SPDK namespace.
Because of this, the file type detection in fio will fail,
and will always initialize filetype to FIO_TYPE_FILE.
Therefore, the SPDK ioengines will need to initialize
f->filetype themselves.
The SPDK nvme ioengine already initializes f->filetype to
FIO_TYPE_BLOCK unconditionally. Do the same in the SPDK
bdev ioengine.
(Just like in the SPDK nvme ioengine, we also need to call
fio_file_set_size_known(), so that fio generic code does
not try to initialize f->real_file_size.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I37df185524ed262cb875105f989685b740b430a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8328
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The .get_zoned_model() callback is supposed to reject unsupported
file types. Right now, we only reject FIO_TYPE_PIPE.
However, in attach_cb() our ioengine unconditionally initializes
f->filetype to FIO_TYPE_BLOCK. This means that the only file type
that our ioengine supports is FIO_TYPE_BLOCK.
Therefore, fix spdk_get_zoned_model() to reject everything that
we do not support.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I115bb8ff9c8ea9f647baebc0196900681a36c410
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8327
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The define ZBD_IGNORE has been removed from upstream fio.
fio will now return an error if --zonemode=zbd is used with a
--filename that points to something that is unsupported by either
the zbd code in fio or by the ioengine itself.
ioengines are now supposed to return -EINVAL for unsupported files
(instead of returning 0 with ZBD_IGNORE for unsupported files).
This change does not need any special ifdef FIO_IOOPS_VERSION check.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I7bec0b1f5dc8f166ebf683f6f3937b2ef295a21e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Getting/putting the channel races with getting real IO channels
causing issues with an upcoming design. Avoid it entirely by using
the first worker channel to get the capabilties.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I750a8d59e294f4cda9f71f3327afc03e15342768
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8170
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This results in a significant performance improvement when using
HW offload engines.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I54d3e39f186c9f878fcf8bed8e9242e29d1e1bf1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8162
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Loading subsystems and restoring state from a JSON config file is useful
outside of the SPDK application framework, so move it to lib/init.
Change-Id: I7dd3ceace2e7b1b28eef83c91ce6a4eedc85740e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6645
Reviewed-by: Tom Nabarro <tom.nabarro@outlook.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The functions to initialize the SPDK subsystems or tear them down
was previously an internal-only API. Make it public for use by
applications that aren't leverage SPDK's application framework.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2ebfd020e6fa4c1947fa1c1a2ac509ce9b0242f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6643
Reviewed-by: Tom Nabarro <tom.nabarro@outlook.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The P5800X drive will report the following error when getting Error Recovery
feature, according to the specification we should pass valid nsid.
nvme_qpair.c: 238:nvme_admin_qpair_print_command: *NOTICE*: GET FEATURES ERROR_RECOVERY cid:23 cdw10:00000005 PRP1 0x0 PRP2 0x0
nvme_qpair.c: 452:spdk_nvme_print_completion: *NOTICE*: INVALID NAMESPACE OR FORMAT (00/0b) qid:0 cid:23 cdw0:0 sqhd:000f p:1 m:0 dnr:1
get_feature(0x05) failed
Fix issue #1955
Change-Id: I30ce60cddcddbf78e57a8c172a2056a82ac72802
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8009
Reviewed-by: Chengqiang Meng <chengqiangx.meng@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This will help us to add get namespace features later.
Change-Id: I7e809cd9e3bcb3874ce141183b9c4ee82543616c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8008
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
This is useful for applications even if they elect not to use the SPDK
event framework.
This doesn't shift everything in one go - just the subsystem
initialization logic. Configuration file loading also needs to move
in a separate patch later.
Change-Id: Id419df1045442d416650ed90e5ee78adfdd623d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6641
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This eliminates the thread-local seed variable. But
we're also adding zipf distributions in an upcoming
patch, and we'll want to store that context in the
ns_entry rather than making it thread local.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icc4a8b7bdbc9cd35525f2d35c9ada8e3ec0ba76c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This app shows how to use the SPDK zipf functionality,
and uses spdk_histogram to show the cumulative
distributions.
Usage:
build/examples/zipf 1.2 100000000 10000
This will generate 10000 random numbers from a range
[0, 100000000) using zipf theta parameter = 1.2.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I36486399b54f57e771cbc5530ae4905afca60b64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7780
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The definition is that:
max active zones >= max open zones.
The REAME.md incorrectly writes max active twice.
Fix this typo in the README.md.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I4b7d24d7bd1efcbe1608d3ee04d8900f83857f5e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7912
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Implement support for the recently added fio .get_max_open_zones callback.
If our ioengine does not implement this callback, fio will always result
in an error when using --zonemode=zbd, on platforms which does not have a
fio oslib implementation for this callback, e.g. FreeBSD.
On Linux, fio will by default try to parse sysfs, which will of course not
work on SPDK.
Implement this callback so that our ioengine will be able to provide fio
with the proper max open zones limit.
This will ensure that fio will be able to fetch the proper max open zones
limit, regardless of OS.
While our SPDK nvme ioengine did overwrite the max_open_zones option if it
was set to zero, this is a bit of a hack. The new fio callback is the
proper way to inform fio about the max open zones limit, so that fio itself
can have access to the actual device limit.
(Just overwriting the requested max_open_zones option will not allow fio
to know if the requested max_open_zones option exceeds the device limit.)
Remove the SPDK specific hack and update our README.md accordingly.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I532a0fa065b9e215ee6229b9100135e5403f198e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7898
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Move get_fio_qpair() out of ifdef and reuse it in spdk_fio_queue(),
since the code is next to identical.
The only difference is that get_fio_qpair() returns NULL if qpair->ns
is not set.
Since we know that get_fio_qpair() returns NULL if qpair>ns is not set,
we can also remove the equivalent check in spdk_fio_queue().
Also use ns pointer instead of qpair->ns pointer in two other places
in spdk_fio_queue().
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ie647a814ff0b7a6f2bb81cbc9d7e95537fbe5256
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7897
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Implement support for the recently added fio .get_max_open_zones callback.
If our ioengine does not implement this callback, fio will always result
in an error when using --zonemode=zbd, on platforms which does not have a
fio oslib implementation for this callback, e.g. FreeBSD.
On Linux, fio will by default try to parse sysfs, which will of course not
work on SPDK.
Implement this callback so that our ioengine will be able to provide fio
with the proper max open zones limit.
This will ensure that fio will be able to fetch the proper max open zones
limit, regardless of OS.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia9c281290e11e4204d270ba4090edb73212ce20f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7896
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There is an error when collecting the cpu usage data in perf.c.
The cpu busy data exceeds 100% when running perf tool with mutli-cores.
Signed-off-by: Jaylyn Ren <jaylyn.ren@arm.com>
Change-Id: I9a00f86a51fb52e115c37199aee6f849b235d868
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7431
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change zone append print to SPDK_DEBUGLOG() instead of an unconditional
print. Since we already print a warning when zone append isn't supported,
there is no need to unconditionally print something for the success case.
This also matches the behavior of the SPDK fio bdev plugin.
Also improve the zone append help text to match the SPDK fio bdev plugin.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ic7604ea4bdf17e0cddfe2638f3db7944ee652474
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7804
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Update README.md with information specific to zoned block devices.
Additionally, add an example config that can be used to test the
--zonemode=zbd fio option using the virtual zoned block device
SPDK module on top of a Malloc bdev.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I68bbc07ab70ad1ce8e38abc91dd8c15c49f90656
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7758
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
