Current implementation supports only adding port to scsi_dev.
This change is required to support dynamic remapping of portals.
Change-Id: Idce49aeae43c8861ebe2807df853694f7bacf884
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379931
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This reverts commit d3828a23ec54a5caef5a40c169e1d4b0b5398add.
GitHub issue #202 reports that this causes a crash with two or more
iSCSI connections on the same LUN.
Change-Id: I9ffb85d393eb506aac9d176299a3b3bcf021a38c
Reviewed-on: https://review.gerrithub.io/379866
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_get_io_channel() already handles this.
Change-Id: I6b28fe10b86b00762ff15324fcd0a32aae94e012
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376267
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
None of these make sense as global parameters - they're
all only configurable per-disk. This is a large simplification
and removes the SCSI library's dependency on the config
file entirely.
Change-Id: I1236158a23fa49e437938c51022b13772e404561
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This includes file names, functions, #defines, etc.
There are still a few uses of "blockdev" outside of
include/ and lib/ - these can be handled later.
This preps for a future patch to consolidate vbdev
modules and bdev modules into just bdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70e575709ae1b0a116b08515fd38ae793de05377
Reviewed-on: https://review.gerrithub.io/369325
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This variable was misleading and unnecessary. Replaced all it's
occurences with SPDK_SCSI_DEV_MAX_LUN.
Change-Id: Iaaf9ed5efb60f9a89585121d2fbec7b43c3723e9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/368115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Retire the old claim/unclaim semantics in favor of
open/close. Clients must now open a bdev to get
an spdk_bdev_desc, then pass this desc to get an
I/O channel.
This allows multiple clients to open a bdev,
although only one may open a bdev with write
access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d319f1278170124169a8a75fd791e926b3f7171
Reviewed-on: https://review.gerrithub.io/367611
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added new function in preparation to implementing device hotremove.
Change-Id: I5b85f76f543b882acf3b0fe40c9e92125594b257
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/366725
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added optional callback inside scsi lun hotremove, so that higher-level
abstraction can be notified about hotremove.
Change-Id: I5f1bd8160e3d770a484068dd73928bc2b64c876f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/367309
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds property of transport protocol id to spdk_scsi_dev.
This allows to change it depending on which appliation is using
the device. Previously only iSCSI was used for all.
Setting protocol id is done at the time when device is added to
vhost controller (vhost) or target node (iSCSI).
Please note that for SPDK vhost SAS protocol id is used,
as that is what kernel vhost reports as well.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I455a856c5d7796a749b6650fee0218d526e094ed
Reviewed-on: https://review.gerrithub.io/362864
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Specify the function as a parameter to spdk_scsi_dev_queue_mgmt_task.
This makes the API clearer by making it explicit that the management
function is required for management tasks.
Change-Id: I92d893aadb6faebea81dd79729894d2c2fddf088
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The type of a task is known due to the function used to submit it:
- spdk_scsi_dev_queue_task() for normal SCSI command tasks
- spdk_scsi_dev_queue_mgmt_task() for management tasks
Change-Id: I183a1f89ab85f3fce1de2491e77d95d4b147fd72
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the scsi_nvme translation code from the SCSI library into bdev, and
provide a generic way to translate any bdev_io status into a SCSI
status.
Change-Id: Ib61a6209387c24543e31574e2b5ca249e2ac8b74
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The contents of struct spdk_scsi_lun don't need to be part of the public
API.
Change-Id: I101b77871054557380610fd901ab38bada463202
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move claimed flag to struct spdk_scsi_lun and remove RPC call that allow
SCSI LUN to be deleted by user.
Change-Id: I0fe57d33ab017816ab4799bce259807735e0c783
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch adds two new unit tests for scsi device:
- creating two different devices, each containing the same lun
- creating one device, with the same lun twice
As noted in code, three asserts are incorrectly set to show functionality
that is not working currently.
Next patch in series implements that functionality and changes asserts
in the unit tests.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2645401fee4f2cd986458e0a4db108ce4e1bf9db
The SPDK_TRACELOG macro depends on a CONFIG setting (DEBUG), so it
should not be part of the public API.
Create a new include/spdk_internal directory for headers that should
only be used within SPDK, not exported for public use.
Change-Id: I39b90ce57da3270e735ba32210c4b3a3468c460b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The public header file was missing some required definitions.
Change-Id: Ic4f8028367b1e21ea00c02660ca36be28da54e37
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Combine the necessary functionality with the main bdev file.
Change-Id: I96d796bc87ac2a8688cdf1fd3c16d2a7c8aef730
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
