This patch introduces per-channel flags to keep state of information
needed in the primary I/O path. Setting/clearing of these flags
should only done through an spdk_for_each_channel() call. Currently
there is only a RESET_IN_PROGRESS flag defined but more may be added
in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia81817e2dabc9997c12beebae72fb129cb5dcf9a
Reviewed-on: https://review.gerrithub.io/377828
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This testcase will help test on bdev constructed
by remote device exported by NVMe-oF target.
Change-Id: I9a561f43132ab68b9f031702647fa92d6aee156b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/379224
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It does not seem nessecary to include it, when this it used just once
in lvol disk creation.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I42ead55329f0ac7e55bb73702d071f118a5c7931
Reviewed-on: https://review.gerrithub.io/379678
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we naively assumed that a completed
reset was the reset in progress, and would
unilaterally set reset_in_progres to false.
So change reset_in_progress to a bdev_io pointer
instead. If this is not NULL, a reset is not in
progress. Then when a reset completes, we only
set the reset_in_progress pointer to NULL if we
are completing the reset that is in progress.
We also were not aborting queued resets when
destroying a channel so that is fixed here too.
The added unit test covers both fixes above - it will
submit two resets on a different channels, then destroy
the second channel. This will abort the second reset
and check that the bdev still sees the first reset as in
progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61df677cfa272c589ca03cb81753f71b0807a182
Reviewed-on: https://review.gerrithub.io/378199
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upper layers are not supposed to put an I/O channel if there
are still I/O outstanding. This should apply to resets as well.
To better detect this case, do not remove the reset from
the channel's queued_reset list until it is ready to be
submitted to the bdev module. This ensures:
1) We can detect if a channel is put with a reset outstanding.
2) We do not access freed memory, when the channel is destroyed
before the reset message can submit the reset I/O.
3) Abort the queued reset if a channel is destroyed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c03eee8b3642155c19c2996e25955baac22d406
Reviewed-on: https://review.gerrithub.io/378198
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the mock wrappers to override pthread_self(), enabling
the unit tests to switch emulation between different threads
from the context of a single unit test threads.
These tests don't do anything useful yet, but will get
fleshed out more as part of some upcoming changes that
will require some more rigorous testing for multi-thread
scenarios (such as multiple channels).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iffdd2c6bebc45da52927769d374c43c5eea0aa12
Reviewed-on: https://review.gerrithub.io/377970
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Defer writing RPC response until after the device has been hotremoved.
Change-Id: I052280b205415e4a2ffa1421653cc49b8e3b1445
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371119
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Devices can be added to a SCSI
vhost controller at any time now.
Change-Id: Ic5dd4b78465d3431479e0389b7ea902e1e25c337
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371281
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since we are calling eventq_enqueue only from inside of the controller
reactor, such ring is not needed. Eventq events will now be sent
immediately. This simplifies the whole process greatly.
The abstract vhost event layer is being replaced with much simpler and
less error-prone vhost external spdk_event API.
This reverts commit 542b5415 [1] together with vhost scsi device
hot-attach feature. Hot-attach shall be reintroduced in upcoming
patches.
[1] 542b541588 ("vhost_scsi: implemented abstract vhost event layer")
Change-Id: I39a427332d573c4e0be548d1c8caf0cf2858f6a5
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371117
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the nvme/reset tool's environment initialization steps
after the parameter parsing.
Change-Id: Id7a4302fa85b88b279895453293c701b982914a7
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/379261
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK already uses DEFAULT_IO_QUEUE_SIZE and MQES to decide the correct
queue depth of NVMe queue pair, hardcoded it to NVME_IO_ENTRIES(512)
does not make sense if users want to set queue depth bigger than 512.
Change-Id: Iaa73fc79e055292ae9bd19af0c8c12f257ae5c46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/379052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A channel may have been deleted between when a message was sent to
a thread and when it gets executed on that thread. So we must look
for the channel when the messages gets executed - if it's not found,
just continue to the next thread(s).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib7e596f11f287c6be521ba729d33378f0a825c7e
Reviewed-on: https://review.gerrithub.io/378002
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Use the mock wrappers to override pthread_self(), enabling the
unit tests to switch emulation between different threads
from the context of a single unit test thread.
Add this into the io_channel unit tests with some very basic
testing of allocating and freeing multiple threads.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8742f16c39e92e82065dc5b8f2e5b2e79273a4f8
Reviewed-on: https://review.gerrithub.io/377992
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some modules rely on accurate memory buffer counts.
For example, bdev checks that all of its buffer pools
are back to original capacity during spdk_bdev_finish().
So flesh out the mempool implementation in test_env.c
to keep accurate counts of the number of buffers "available"
in the test mempool. Note that test_env is only designed
for unit tests, so this functionality is not multi-thread
safe.
Still allow for NULL mempool pointers and just default
to old behavior in that case - some unit tests such as
the blobfs cache tree tests still rely on that behavior.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1d0ab49e16741c92d777d76f35e60271e4ad943a
Reviewed-on: https://review.gerrithub.io/377969
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Test using multiple iscsi target nodes with LUNs backed by
logical volume bdevs
Change-Id: If87ed19dbef84fdc79d5758e063fc11d047e790e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/378034
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This restriction causes bdevs examination/discovery to fail
when there are asynchronous operations. We should remove this
limitation for now. Future plan is to implement approach
similar to the one that is present in kernel.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibe5572297672022412d25a4a835dc9527ce97f3e
Reviewed-on: https://review.gerrithub.io/378758
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Test for veryfing correct interoperability of nvmf with
use of lvol store / lvol bdev backends.
Also added initial test plan in which test is described.
Change-Id: Ided093091847dff2bca76063926798d5606d73bd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/377529
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Script for testing vhost using lvols as backends for
virtual machines. Option for using nested lvol stores and
nested lvol bdevs also provided.
Change-Id: Iad8a196c97f292881a8b424b4433ec281f12aec6
Signed-off-by: Lukasz <lukaszx.galka@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/365798
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
FFFFFFFFh is reserved for the broadcast NSID and can't be used as a
NSID for a specific namespace.
Change-Id: I64a3cc80993d7b34324823462f4d992d1415773f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
move the main portion of run_tests.sh into rocksdb.sh to simplify
rocksdb testing and allow for the provision of more granular timing
coverage.
Change-Id: I60649394c496a347f4dca948d1d499ad8578c4a0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/378827
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A later patch in this series fails the test pool because
scan-build says we might be using garbage for one of the
descriptor pointer comparisons. That later patch does not
touch this unit test file at all, and the bdev-related changes
do not touch the code path used around the bug report. But
the report is valid - it's possible that with the additional
bdev.c changes that scan-build's ability to detect this
bug changed for the better.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2bf165fe4d91a13d481010176a0339b591b16014
Reviewed-on: https://review.gerrithub.io/378825
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the final set of command processing functions (admin and I/O
commands were already handled in ctrlr.c), and it allows us to clean up
the ctrlr.c API some more.
Change-Id: Ic73c56c44d7fd64bfaa72b6f5f6f0984b4dfa053
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378018
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Combine nvmf_process_connect() into spdk_nvmf_ctrlr_connect() to
simplify the logic and keep it all together in one function.
This also allows us to move the invalid connect helper function and
macros back out of the header into a static function in one file.
Change-Id: Ia3bd80d0309392520d51bf8f5830d3f23332c5e3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378016
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This moves the subsystem->ctrlrs list management fully into the
subsystem code, which will help simplify thread safety considerations
once we start adding locks.
Change-Id: Ibc118923f1bd520f1e524cde5d45ccfcc69aee1e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previously we made cntlid globally unique as part of
a strategy for scaling connections that never panned
out. Now, we have a new strategy and don't need cntlid
to be globally unique, so relax the restrictions
and simplify the code.
Change-Id: I167772f5e7d37183715bf9967b0102529144bb2b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376250
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch add support crc for metadata pages, we will also
add crc for supper block, used md and used clusters bitmask
pages in the following patches.
Change-Id: Ie36fcc16b39296d06721f1f8eb5689260194c558
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/377901
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Mark the file as deleted in the function spdk_fs_delete_file()
when the referance is not 0, and delete the file when it is closed,
make the behaviour as "unlink".
Change-Id: Ia934bb73c82c48fdbab79dbe4b56296a73abc01e
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/374944
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Controller creation RPC can't be done on controller's reactor
(as there's obviously no controller yet...), so a special
set of vhost_mutex_lock/unlock() functions to has been added
to synchronise controller creation with the rest of
ctrlr-enumerating code.
Change-Id: Ib6e4b894a85ff1f70ebd047832c5a3568a00f1a7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377651
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Continuation of patch 94afad5a [1].
That function could be called from outside of the vhost reactor,
causing data races and possible segfaults.
Now, after this patch, all ctrlr-changing functions take spdk_vhost_dev
parameter, meaning they should be called via external event API [1],
which soon will be the only way of obtaining spdk_vhost_dev pointer.
[1] 94afad5a ("vhost: added external API to call spdk_events on vdev reactor")
Change-Id: I40ea66ad09fb5c433dd897a4e22aedeb423f9b4b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371013
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Added spdk_vhost_dev_backend_event_done function
that sets the return code for the callback and
transparently calls sem_post.
Change-Id: Iba27af780cd1753056c1607177c945e13c95c712
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377585
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ia96ae78ff9530d953181ac5f7255a38f3c8ec430
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/375392
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I743f5e4d1c24ad5ef9f1fef4c2678e347b179a9f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377260
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes it easier to unit test the individual functions and also
easier to follow the logic.
These helpers will also be used in the upcoming Write Zeroes function.
Also cleans up the variable names to be consistent with the rest of the
code.
Change-Id: I69847b6a052fb7baff058ed8e5b79904ddf2ec6d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377259
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently GPT keeps the bdev it is examining open, even after determining there is no GPT on it.
It is due to spdk_gpt_base_free() not notifying bdev layer to free base bdev_part.
Additionally release of bdev module for that bdev was moved to bdev_part_free,
as the module is not claimed until bdev_part on base bdev are created.
Functional tests added to verify the changes.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id75f88259267847e8ec476d19750dc1e2690f11a
Reviewed-on: https://review.gerrithub.io/378621
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdevio used to do I/O at hardcoded offset 2048.
This obviously fails for any blocksize > 2048.
All 2048 offsets has been changed to 8192.
Change-Id: I70c057b8de539718175a8d29aa91422ba3fba70e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/378298
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is already included in ENV_LINKER_ARGS when necessary.
Fixes GitHub issue #193 (Compile error for fuse.c on FreeBSD).
Change-Id: I30fce30b709d73c2c01b6782a9b1f3c39d823d42
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378210
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I22c4273812922e1a2f7bb7ec0d3e8353e74780a3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377822
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_nvme_ctrlr_cmd_io_raw_with_md() will be verified
on Cosmos+ OpenSSD as soon as it will support meta data.
Change-Id: Ib5f3f1f1eba66d0147a566804395bfa5ec959c2f
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/377428
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a better performing API since it avoids
unnecessary bytes-to-blocks conversions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib84fad231e40d827d96adf56846c16ea04a4e20a
Reviewed-on: https://review.gerrithub.io/377798
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
split, gpt and error all have a lot of similar code, and
are based on the presumption of one or more "partition" bdevs
on a "base" bdev. This results in quite a bit of duplicated
code between these three bdev modules. The error bdev
module does follow this same model - it just always has only
a one-to-one mapping between the error bdev and its base bdev.
As all of the modules move to allocating their own bdev_io
rather than allowing for adjusting an existing bdev_io and
resubmitting it, there will be even more duplicated code
between these modules.
So this patch adds a set of helper functions in the common
bdev library to eliminate all of this duplicated code.
This patch also moves the split module to use it - future
patches will also convert gpt and error.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8032331b46c32da9fca18a077580ccb274c6204
Reviewed-on: https://review.gerrithub.io/376423
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The system could crash anytime, we need sync the "clean" flag
into disk as soon as we load the blobstore. Then if the system crashed,
we will find the blobstore is not clean shutdown next time when we load
the blobstore, and we could run the recover process then.
Change-Id: I6189678e970ffe979a224e02be6cede0ee44dde8
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/376276
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Temporarily lower iodepth to avoid random test pool
failures while running vhost blk fio tests.
Reenable old iodepth value once 'too high' vhost blk performance
is solved.
Change-Id: I385ff3151b4433b331807be6ce0f3103980bae7c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/377697
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is still causing a lot of random failures in the test
pool. Disable this for now. There are a series of patches
coming up which will improve reset handling significantly -
let's wait to re-enable this until that is in place.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If811fcffa530954857cbb14f0326a53ee462d8c8
Reviewed-on: https://review.gerrithub.io/375651
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The next step towards fixing synchronization issues between RPC and
vhost controller reactor.
This patch makes changes to already present vhost timed event API
to conform it to the upcoming external spdk_events API. The timed_event
API shall be removed from headers in future. See next patch for details.
Change-Id: I31b0d7c383b39c32326daa750663ebdeb4edd562
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377584
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allows called to specify something other than stderr such as
stdout. Existing callers updated to use stderr.
Change-Id: I48a703e1474a45952878121a83c19fef1c43d630
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/377420
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I46dea98bf762967d49867e428f8ce6b3ec881072
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add new versions of all of the I/O calls that take parameters in blocks
instead of bytes. These are intended to replace the old APIs, but
we'll keep them for now to preserve compatibility.
Change-Id: I85ab665c653e8c697016c628837d49aa0c3bfcd0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Caught by astyle 3.0.
Change-Id: Ie175f354526fbae01513e47228eb7dad249c081a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377248
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This new vhost_scsi_ut code was merged after changes to the vhost
timed_event functions and didn't get rebased correctly.
Change-Id: Ia92936a19a668a0f1113518097b20b818f39986c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377246
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Move files from test/vhost/fiotest to test/vhost/common.
Scripts and functions from fio tests will be re-used in
any new test scripts.
Change-Id: I2423d636d41dcb2b2af12987769961607e969392
Signed-off-by: Lukasz Galka <lukaszx.galka@intel.com>
Reviewed-on: https://review.gerrithub.io/372545
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The previous behavior with an empty host NQN whitelist was to allow any
host to connect.
Change-Id: I5401e52d96642cf20afe0d50c692613e67262edf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376432
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the IOMMU is enabled, automatically register memory
added by the user through spdk_mem_register().
Change-Id: Ie02c7bf445314da23e2efee9de9c187ed0773a9f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375249
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Memory is now reference counted at a higher level.
Change-Id: I61b24db7b92a129686775eddbff3a48814c842fe
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375644
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Iad372db86857ce92145388279e5095b17efe3983
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375829
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_bdev_get_io_channel() already handles this.
Change-Id: I6b28fe10b86b00762ff15324fcd0a32aae94e012
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376267
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The SCSI LUN unit test was still stubbing spdk_spdk_get_task(), which
doesn't exist anymore. Replace it with a unit test helper function to
initialize a task, and remove the unnecessary heap allocation by putting
the tasks on the stack.
While we're here, clarify which tests should result in the task
completion function getting called by removing the (unnecessary)
spdk_scsi_task_put() calls.
Change-Id: If2b7983a66611131e6a1547dbfed2ad869bdb6e8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376266
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is not a public API, so simplify the number
of internal header files where important types
are defined.
Change-Id: I115d0497d37e3cfe399c3a5b2546d20aa4fe24b4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376249
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We are still creating one poll group per controller,
so this isn't particularly useful just yet.
Change-Id: I65c54385bdba587d4b1098629727877970d39277
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376241
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure the global spdk_memzone_lookup mock variable is set back to
NULL rather than pointing at dummy, which is a local variable.
Change-Id: I2c2d478fb5fd8cbb96983d7005e788cd88fe642f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376684
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Updates for running with vhost-blk.
Removed checking & cloning Qemu sources - should be
already installed in working directory.
Some other minor fixes for typos.
Change-Id: Ifd790a301c8ca1e19434f03ba32f5eb916dbe0a6
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/373897
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The requests are now sent using spdk_thread_send_msg
internally, so the user no longer needs to supply
these callbacks.
Change-Id: I84b0f5f0f1f6fa6eaf9a717934925d3ad802fcfd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376240
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of polling each individual qpair, polling is now
done by poll group. This allows transports to use more
efficient polling schemes in the future.
The RDMA transport as of this patch still just loops
over each qpair in the group and polls it individually,
so this patch results in no performance change yet.
Change-Id: I0f63f0dbbc5fd43c1e0d9729b10b37c2cb0d9881
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376239
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It isn't referenced directly anywhere but the unit tests, so
now we can remove it entirely.
Change-Id: I92bbf0e15ecffe2fbbdf5eecc29b6ef0e2fd5baf
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375462
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace SPDK_TRACE_DEBUG with component-specific flags.
Change-Id: Iee7eafab5e6ac8713f247323a18552b5afb0e86a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Everywhere this is used, we can just use
spdk_nvme_transport_id instead.
Change-Id: I407c812cd6a1ca3afcb3d1fe87c7e22183b09d7a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375461
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, move it to the appropriate compilation unit. Further,
remove use of g_nvmf_tgt.
Shift the function to a new compilation unit as well.
Change-Id: I1a43ff366532b450f00aed54a290fb9eed9bf453
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375455
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This moves the thread name setting code into the generic SPDK thread
setup code, so now all spdk_threads can be named, not just ones created
by the event framework.
Change-Id: I6c824cf4bcf12fe64a8e2fc7cdc2d6c949021e40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows the user to configure an arbitrarily large number of
namespaces instead of the current hard-coded limit of 16.
Change-Id: I3a29b0de10eafd682b12c54e12411d1f9d41ce85
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375636
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9b1c8a1be8e6bce705ba6c549957e82e492038cc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375623
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make sure that req returned from the request allocation functions isn't
NULL before starting to check its fields.
Change-Id: I21869834148200f4bfd5065ebbc874041c559599
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375618
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Icfd37861ececa4568a377f3312d879797d7d5c8a
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372552
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I1d62e34deed873446a9a87f16188b5c8ed21aea5
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372551
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I222b0483d6b2b804ece87f2d2694f07770c885c5
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372549
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ib848a58821d17b76195af2074613216c03734392
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372548
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I8bb02911444094853d8b7e6f6716d8c3ce72e92d
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372547
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I39757052a7458ff1520b2cc13face2db1fafbf75
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372542
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2c871d583b7e43bd5f904f6603333923deaf4fd9
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372541
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Certain vendors do not report correct number of queues allocated in "Set Features/Number of Queues" completion CDW0 per spec.
As a work around, issue "Get Features/Number of Queues" and rely on the value provided there.
Change-Id: Ib9cc4dcf1bdb732413becc751883a7311c6f672f
Signed-off-by: Konstantin Vyshetsky <kon.vyshetsky@stellus.com>
Reviewed-on: https://review.gerrithub.io/375234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adding ability to delay scheduled tasks until _bs_flush_scheduler is called.
This allows to test blobstore when tasks do not finish immediately.
New unit test added for spdk_bs_unload.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9c1b3c0c2ebb1e16c032fd136d11ef351d8f3fe0
Reviewed-on: https://review.gerrithub.io/374767
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Explicitly allocating spdk_bs_dev on init_dev() allows to check if dev_destroy for it was called.
If it was not, then ASAN will provide information on that.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I333185958dd8c29180954077a6c326b82e5949ae
Reviewed-on: https://review.gerrithub.io/374766
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I19d1866fb90ffd3e3543ccc66a098571ade3e3de
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, move the implementation into the appropriate
compilation unit.
Change-Id: Ie1c56bc5e077b81d744414716f9267ceaf591e49
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375034
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The user can now specify which target they want to
search for the subsystem. Also, change the name to
spdk_nvmf_tgt_find_subsystem and put it in the correct
compilation unit.
Change-Id: I7c085959814c14d8400a0ba2572103b0814a4d0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374879
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The user can now specify which target to create the subsystem
on.
Change-Id: I6206c0d762d59ff6312cb58d36180281baaa7266
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Most of the work here revolves around having to split
an I/O that spans a cluster boundary. In this case
we need to allocate a separate iov array, and then
issue each sub-I/O serially, copying the relevant
subset of the original iov array.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0d46b3f832245900d109ee6c78cc6d49cf96428b
Reviewed-on: https://review.gerrithub.io/374880
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fail spdk_bs_init() if the dev being used has an
LBA size that is larger than a metadata page or not evenly
divisible by the size of a metadata page.
Change-Id: I0e0ca747ecd5b6039c20fb6a885382bde4527158
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/374182
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously this only worked if bdevperf was set to
run on a contiguous set of cores starting at 0.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9983880711eb36681332495034b6656293eed3f6
Reviewed-on: https://review.gerrithub.io/374536
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new struct spdk_nvmf_ns to hold namespace information, and add
accessor functions so that it can be moved out of the public API in
future patches.
Change-Id: Id926aaa3cc279649057afc65e08024628edbc435
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374740
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that the discovery controller is using the common admin command
functions, move all of them into the common ctrlr.c file.
This also eliminates the subsystem ops, which are now just direct calls.
Change-Id: I0a25a61e0ad8742d3d76a3cacd46db4701fc7d63
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also remove the stored controller data from spdk_nvmf_ctrlr and instead
generate up-to-date information every time the command is called.
Change-Id: Icdcc7c826eff25711c6700d12089a86a8dedee54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374559
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Both regular NVM controllers and discovery controllers implement the Get
Log Page command; combine the implementations into one in ctrlr.c.
Change-Id: I7fabf40ec52d8738263ac152afe9cd7773ff7fbd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374555
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Simplify the initialization of controller identify data and properties.
This is mostly common between discovery and NVM subsystems.
Change-Id: Id8074d5260213e32892fd77845884a80071c9d88
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374534
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50be9315d19c4189140f79634841ee53315470cf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374533
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
PAGE_SIZE is the host memory page size, which is irrelevant for the NVMe
driver; what we actually care about is the NVMe controller's memory page
size, CC.MPS.
This patch cleans up the uses of PAGE_SIZE in the NVMe driver; the
behavior is still the same in all cases today, since normal NVMe
controllers report a minimum page size of 4096.
Change-Id: I56fce2770862329a9ce25370722f44269234ed46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
While here, do some additional cleanup:
1) add -h option to print help and exit
2) parse args before initializing the environment - this
allows "overhead -h" to immediately show a usage message
without having to wait for DPDK to initialize.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1021f9f7f7f2b03e34c0fd40714ce8f3db849cb2
Reviewed-on: https://review.gerrithub.io/374508
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Report the Ceph pool and RBD name in the get_bdevs output for RBD bdevs.
Change-Id: I0e9be0b540e90503ce052c968f979b5887673c24
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373416
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An optional field was added in NVMe 1.3 to indicate the optimal I/O
boundary that should not be crossed for best performance. This is
equivalent to the existing Intel-specific stripe size quirk.
Add support for the new NOIOB field and move the current quirk-based
code so it is updated in nvme_ns_identify_update().
Change-Id: Ifc4974f51dcd59e7f24565d8d5159b036458c6e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373132
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
replaces all references to strerror in the spdk lib directory with
references to the thread safe strerror_r
Change-Id: I80d946cce3299007ee10500b93f7e1c8e503ee41
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/374012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
after we fix the "write" issue for hotplug of iscsi target, we should
also modify the test case the cover "write" test case for hotplug.
Change-Id: I5ef8d6836548d0f682ecfb44da41543e16e979de
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/373799
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
From the exising code, the comparison should + 1.
Suppose offset = 2^19, we still can be fit into
tree with level =0, since there will be 64 buffer,
each with size 2^18, so we do not need to
increse the tree level.
Also a unit test is added to demonstrate this.
Change-Id: I95d3542b0881aa7bb661bc57bc789cc4ef4e7509
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372396
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add num_queues for vhost-user-blk-pci to use multiqueue.
Change-Id: Id0ddf234d936c7c31da0c3ee47a7220b2e0044bc
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/373483
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI spec says that zero transfer length shouldn't be considered an
error.
Change-Id: I98958cc393e0e487e25fdbb0eb7fc8126aff9945
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374320
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1e815b1d6672804aed7c51a6a2a1d9941a671e35
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374346
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I45c6f696052213b00c8db0c9c63e01d14b900672
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/370775
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure later tests don't fail due to a GPT partition table created on
an NVMe device.
Change-Id: I623e4fd0a84588a85f9d1ced6daf539d48267f50
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374007
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We report SPDK_WORK_BLOCK_SIZE (1 MiB) as the Maximum Transfer Length in
the Block Limits VPD. The initiator should not submit a request larger
than this; if it does, fail the request.
Change-Id: I39575cdca4555ac1f78e055a48569be3f47e4781
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373162
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7be51b1eae787e7f87c7bc95633a5f58005c1cce
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372538
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This helps prepare using the bdev test tools (bdevio and
bdevperf) with a virtio/vhost-scsi initiator. For virtio
initiators running in the host OS, SPDK must open file
descriptors for every hugepage to pass to the vhost
target. vhost typically limits the number of memory
regions to 8 - meaning 2MB hugepages generally will not
work, but even for 1GB hugepages we need to limit it so
that we do not default to trying to use all of the
hugepages.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If1e6e91cea096421b8dc5e707435e287ca14bb6e
Reviewed-on: https://review.gerrithub.io/374013
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I4b046e63a669d52c875efffb5a91e99845fc623d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370383
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
None of these make sense as global parameters - they're
all only configurable per-disk. This is a large simplification
and removes the SCSI library's dependency on the config
file entirely.
Change-Id: I1236158a23fa49e437938c51022b13772e404561
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the hotplug test was run in a qemu virtual machine, it consistently
failed to unplug the devices after insertion. Increasing the delay here
to four seconds resulted in proper deletion of the devices and a passing
test. (replicated three times)
Change-Id: I0283c8440568edd8dd8ca8945e691a29b775aab5
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/371401
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now, this is a name change of controller to poll_group
in the transport layer. Over time, the poll_group will
become a more general concept than a controller, allowing
for qpairs to be spread across cores.
Change-Id: Ia92a2934541ad336f462f73175d53aaaf021f67b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371775
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a file-backed AIO bdev to test it out.
Change-Id: Ifdf206bbdf6cae9379fdc02c80755e96a7198bce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373673
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A single warning message is printed instead.
This is required for VMs which have memory mapped virtual devices. (e.g
NVDIMM in Clear Containers). This memory won't ever be used by guest
kernel for IO processing.
Change-Id: Ie24501acbdb3ba0d67bd29b146a09b222451427d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/373224
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Default configuration job for FIO integrity test uses block size 4k.
This patch changes it to 4k-512k for better bs coverage.
Change-Id: Ib31b9c663288b5fa9226dd429458ae0fe8ba9209
Signed-off-by: Lukasz Galka <lukaszx.galka@intel.com>
Reviewed-on: https://review.gerrithub.io/372081
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Now that we have scripts that work with the standalone 'ceph' utility,
drop support for the previous hard-coded Ceph source path.
Change-Id: I6d8db999e4fc33075dfafd9ba3734f95ad0f9351
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373410
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
According to the env.mk, DPDK include file can be
passed by user, so we need to use DPDK_INC to
avoid the compilation issue.
Change-Id: I24f6ca496eefe16c18bba7278cc6d00120da79e1
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/373235
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This adds support for cleaning page caches between each of the
db_bench test within run_test.sh script.
Change-Id: Ibcf37945d530a7a940d4a6365e3f1a9eeffb26c0
Signed-off-by: Vishal Verma <vishal4.verma@intel.com>
Reviewed-on: https://review.gerrithub.io/373631
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I321546e27d217544cb97c694c8471a3eb05e15e6
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/368639
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow us to virtualize all of our tests.
Change-Id: Ic9697c1622e516d0021c8af37c0cd4c0f65d430a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/370992
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adding this coverage identified how the functions in test_env.c
are closely related to the new mock library. Given that there are
not that many here I don't think we *need* to try and consolidate
or make this any tighter. As it is now, I added a note at the top
of test_env.c to mention the use of mock globals to control when
a function is to be mocked or passed through and this first use
serves as an example.
Change-Id: Iac819f60f2028ac8bd8c75898e7dba7f4e12df35
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/372529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There are now three simple functions on the transport:
listen(transport, trid)
stop_listen(transport, trid)
accept(transport)
This makes the code quite a bit simpler.
Change-Id: I550343a084b5c095240703952c8c07ae535b5c16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371774
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Instead of scattering direct calls to the function
callbacks throughout the code, add some wrappers.
This will make some later refactoring marginally
easier.
Change-Id: If735089967e3ce828dcff68f2430e7810bf2f123
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371749
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Create one transport per nvmf target. Today, there is just
one global nvmf target, but this paves the way for multiple.
Change-Id: Iaa1f8c5e7b3c1e87621ef2a636c68c2dd8fd929e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371748
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This also changes the SGL -> PRP case to translate each 4K page from
virtual to physical, in case the buffer is not physically contiguous.
Change-Id: If027f9d656c52c56504f0c64cd4464e16440df63
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/371616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Match the terminology used in the NVMe-oF specification,
which is queue pair. For the RDMA transport, this maps to
an RDMA queue pair, but may map to other things for other
transports. It still is logically a "connection" from
a networking sense.
Change-Id: Ic43a5398e63ac85c93a8e0417e4b0d2905bf2dfc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is just a rename - the functionality hasn't changed.
Use the same terminology as the specification (which is controller)
so those familiar with the specification can more easily
approach the code base.
This is still conceptually equivalent to a "session" in the
networking sense.
Change-Id: I388b56df62d19560224c4adc2a03c71eae6fed0d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ib6245e981d550e951a518176730a0e8d88378207
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372341
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I33506d6b9ff09c45c057326f7339d742eebc45b4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372861
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I58fa306781fd2cd5cd2d63809cf900b03c132edc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372860
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe-oF target was written before we defined
spdk_nvme_transport_id. Now that we have it, go back
and replace all of the locations where we individually
tracked traddr, trsvcid, trtype, etc. and use a trid.
Change-Id: I84334a12c7581f414c1e84680f122fe885a3b9dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370744
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ie05f58e677107072fea6cc7702bab47a077cb595
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370743
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I90edce0d9aac7be12ce8ba346aa6e16f67628b0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/369677
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This allows the library user the flexibility to use a different
threading model.
It also provides a way to indicate when the connection is closed so the
app can cleanly shut down.
Change-Id: Ibc196c0b8334fcb8f50d0233def16c6acf3c90d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372377
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the CRC32 CPU instruction, if available, to optimize the iSCSI
CRC-32C calculation.
Change-Id: Ifb706528c28f5e6921ebf525274b959d8cac85a0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370766
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Factor out the iSCSI and GPT CRC32 functions into generic library
functions.
Change-Id: I1f1a5f3968a983b663a51bd984500492eeb12605
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370765
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, the local ceph directory was the only requirement for
running rbd tests. This patch allows the tests to be run if hash is a
known command.
Change-Id: I176bfc2e1d95f7d6d210c2faa03ff272819fe34b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372326
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to query and configure the bdev
modules much more dynamically.
Change-Id: I11f757039892f4353721be422317b641d72bd2a9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370584
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For pcie, this just equals the number of SGLs we can fit
into the per-tracker memory.
For rdma, this is just set to 1 for now since nvme_rdma.c
does not support multiple SGEs yet. Once that support is
added, this will change to use MSDBD (Maximum SGL Data Block
Descriptors) instead from the controller identify data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34a4c546b5ff46918a296a73ed8cbcc6c9879d5a
Reviewed-on: https://review.gerrithub.io/372358
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was missed as part of commit f6e62d2ce1 (nvmf: Remove direct mode).
Change-Id: I2b00cc1f4faac4a5c26cba44e65e3e16508e24fe
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372344
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is the first in a series of patches to remove network configuration assumptions from the NVMF test suite.
Change-Id: I9d8a9daab6910c5e80276db7e6701e1aa8e1d38f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/371193
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is now only virtual mode. Virtual mode has been
improved enough to reach feature parity with direct
mode and performance benchmarks show no degradation.
Simplify the code by always using virtual mode.
Change-Id: Id5cdb5d4d8c54e661b245ed7250c2f9d66ca2152
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/369496
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for enabling nbd mounting as a service within existing
applications.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I225ae20dc86b2d70a1a39a325e754b22f34feaee
Reviewed-on: https://review.gerrithub.io/369674
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
No new coverage added, just used the STUB macros in nvme UT
to make sure they cover all the cases and discovered a few small
tweaks needed: (1) added _V variant to declare void stubs (if
someone sees an easy way to make DECLARE_STUB handle this case
that'd be cleaner but I don't think its a big deal) and (2)
updated DECLARE_STUB so that it can set a struct return value
by adding {} to the ut_ variable set statement.
Also ordered the declarations simply for readability, the _V
first, the regular stubs next, the _P next and then the stubs
that don't have a macro to cover them because they do something
other than return a specific value.
Change-Id: Idd8919d2b9e9daa76dd629364ea1d0285657fa81
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/368420
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
previously, the tests have been hardcoded to use a manually installed version of ceph.
The attached scripts allow the user to create a ceph cluster from a package managed version
of ceph which requires no extra configuration.
Change-Id: I22e4ea9eb95f1e84a968ee2bce6133568fda33a8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/370399
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a helper function to remove trailing newlines.
Change-Id: I8b1a2bf3d70ef17e0bc7e74429ac955c68cb6bcf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370592
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I2b388aa50bf6da3341c74ba4ea414939c91e22e1
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/371791
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2b6a22591d0a5f7435d9fd9dd8d6a1c854da3d89
Reviewed-on: https://review.gerrithub.io/371978
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
A virtio descriptor may specify a buffer that spans
a huge page boundary or even a vhost memory region.
So modify spdk_vhost_vring_desc_to_iov() to take this
into account.
While here, also change spdk_vhost_vring_desc_to_iov
to return int instead of bool. int return with -1 is
most standard to indicate failure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I71faefce0367dc9e44d70ea4429a28dd64f04c10
Reviewed-on: https://review.gerrithub.io/371756
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
While here, add a new DEFINE_STUB_V for void stubs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6b0b27616ddc2525cdd425f65edf8a0bd89ba564
Reviewed-on: https://review.gerrithub.io/371735
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove RESULTS_DIR PREFIX since we already change the folder
Change-Id: I6be0b4dda481377a96d8fdbb69d5d60a6616c7d0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/370829
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Patch afe860ae deferred freeing the io_device. However, for nvme, the
io_device context (spdk_nvme_ctrlr) is still being destructed before
io_channels are destroyed, causing segfaults on hotremove.
This patch defers io_device context destruction and fixes nvme
hotremove.
Fixes: afe860aeb1 ("channel: Correctly defer unregisters if channels exist")
Fixes: 5533c3d208 ("util: defer put_io_channel")
Change-Id: I7af699174cac0c6c6a6faa2cc65418c47347eb9a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370459
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Implemented abstract vhost event layer on top of virtio eventq.
This allows us to defer virtio-event-related actions to be called from
the vhost poller thread. This is required for hot-attach, for which
io_channels have to be created on the I/O thread.
This adds full support for hot-attaching and hot-detaching vhost scsi
devices. They can be now attached to a controller via RPC at any time.
Change-Id: Icf353bfcf69c83ef16b8fc771ea4c487002094f9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/370016
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When using AIO as the real device of /dev/nbd, we
fail the test due to the alignment issue
Change-Id: I608dfdad1e0cac0beaf438c7a1f115c2d1a9f943
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/370233
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I261e6ed578335ab091973f7546035e63a00dbbf4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/369735
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These variable names are changed to retain conformity with astyle 3.0.1. Astyle 3.0.1 recognizes 'final' as a keyword and incorrectly formats the iscsi_spec.h file breaking the build. Names were changed to avoid this case and maintain consistency within the struct.
Change-Id: I39c29d768c0ddfd459a9e9212c29cf564dad1963
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/369905
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I155d956b0492120bf1b0194d0e7303d781bcdb25
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/365106
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The iscsi_tgt fio test script called gen_nvme, but it never actually
used any NVMe bdevs, only Malloc.
Change-Id: I1a4eb16a4aa48f7f5de7a292c2e06a7a1711e181
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369495
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I88b4e91181ef87264a71bcbddb56d7a71cc0b084
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/369542
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This enables checking permissions - for example,
spdk_bdev_write will fail if the descriptor was not
created with write permissions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68b65a560f471f2e0f71a7f42cfa6689b911110f
Reviewed-on: https://review.gerrithub.io/369493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We still will sort the bdev_module list so that modules
with an examine() callback are initialized first. This ensures
they have a chance to initialize before later modules start
registering physical block devices.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I792cfb41b0abe030fe2486a2c872cbf329735932
Reviewed-on: https://review.gerrithub.io/369486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
vbdev modules still open/close bdevs as normal, but
should open bdevs read only when tasting (i.e. reading
the GPT to see if there are SPDK partitions). When
a vbdev module is ready to claim the bdev for purposes
of creating virtual bdevs on top of it, it calls
spdk_vbdev_module_claim_bdev(). It can pass its
open descriptor as well to have it promoted to
write access (required for future vbdev modules like
logical volumes).
Note: error vbdev was changed to copy the base bdev
parameters one-by-one instead of a blind memcpy - we
do not want to copy the base bdev's vbdev_claim_module
into the new bdev!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If2ee67dc78daf96050343c473671aa3402991bb1
Reviewed-on: https://review.gerrithub.io/368628
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
At least on Ubuntu, sgdisk gets installed to /sbin, not /usr/sbin.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I59c806d2c93c6a1773aea11d6fc669e3df0e3c08
Reviewed-on: https://review.gerrithub.io/369304
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we had a pdu->ahs pointer that was always NULL (never set
anywhere), and we would try to read data into this NULL pointer if the
initiator ever sent a PDU with a non-zero TotalAHSLength.
Rename the existing ahs_data array in the PDU to just "ahs" to minimize
the necessary changes. We never actually dereference the ahs structure,
so its type is not important. (We can cast it later if we add support
for anything that requires an AHS.)
Change-Id: I10d19a6e0d99f326794cbe6469eacedadc634c67
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369315
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also restoring vhost block tests in autotest.
Change-Id: Idc6a3068650ce28636f4709df5a51029bfddbcdd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/369470
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure the output.my_name pointer is not NULL before calling memcmp()
on it. Fixes static analysis warning about a potential NULL pointer
dereference.
Change-Id: I85faf57c63b0760c4f90d9ee99f6d7e3df121211
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369264
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1899a47fa9d9821c16ea648bbe3290f6306d0e3d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368626
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_json_write_string_utf16le() writes a UTF-16LE string to a
JSON write context.
Change-Id: I413ffb8a3dee6e1b44ec96ce2415fd1b9c36320f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368625
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaed5e670bef4ef5e588c9df4858f4d1ff240df58
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369273
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <roman.sudarikov@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This variable was misleading and unnecessary. Replaced all it's
occurences with SPDK_SCSI_DEV_MAX_LUN.
Change-Id: Iaaf9ed5efb60f9a89585121d2fbec7b43c3723e9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/368115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new spdk_vbdev_module_examine_done() API which
vbdev modules can use to notify the generic bdev layer
once a base bdev examination is complete.
This is especially required for asynchronous vbdevs
like GPT which must issue I/O to the base bdev.
As part of this patch, add examine callbacks
for both split and error, which for now only call
this new functions. Later patches will move code from
the init callback to the examine callback for these
modules. examine callbacks are now required for all
vbdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I49f2d012d1675b878bcd23afff427c740c6502c7
Reviewed-on: https://review.gerrithub.io/368831
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a bit of a workaround for some upcoming changes
where bdev subsystem initialization will not wait for
all vbdevs to finish tasting all bdevs that are registered.
We need to allow those vbdevs to clean up after themselves
after doing their initial tasting, before we start the
unit tests, since the unit tests are blocking and won't
return to the reactor loop to allow asynchronous tasting
I/O to get returned to the vbdev modules.
Eventually we should consider modifying bdevio run
asynchronously, maybe including removing its use of CUnit
for test reporting.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6c425dd2711ce06fb6df1678f08294d6228c9ae4
Reviewed-on: https://review.gerrithub.io/368616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3051b63942770e45be22af0ae03a78a7c543f81
Reviewed-on: https://review.gerrithub.io/368597
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Move the per-connection send buffer into each request, and allow a
connection to have a queue of responses ready to be sent.
Change-Id: If6b2151691c4cd76f3cf7cde0cdd8f20cac77ceb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368470
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be necessary when the lifetime of a request can exceed the
lifetime of the values stored in spdk_jsonrpc_server_conn.
Change-Id: Icd9772eb142e3f6ae69303aff1e12bc213f435a4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368455
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will greatly simplify the implementation of asynchronous requests,
and asynchronous requests also allow clients to submit multiple
overlapped requests, making batches unnecessary for executing multiple
RPCs at once. Additionally, our RPC client (scripts/rpc.py) does not
use batch requests.
Change-Id: I2529793c54b43acbacd934d82926aa32e286210c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368449
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The default print level used by the apps is SPDK_LOG_NOTICE, which will
prevent the tracelogs from being shown.
Change-Id: I5f136e8aa0be0aa7634c7dd72231f2c23b129e51
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368803
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Look for open RPC port instead of issuing "sleep" for a
number of seconds.
Change-Id: Id75476ae3d6c39de7f7da2c0878d251384c2bb65
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/364974
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow running VMs in fio tests with vhost-block instead of
vhost-scsi.
Change-Id: I89ee437264ddcda0aaefdb71744cee6ce7d451d8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/365808
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
