Set the bdev->optimal_io_boundary to the strip size, and
set split_on_optimal_io_boundary = true. This will ensure
that all I/O submitted to the raid module do not cross
a strip boundary, meaning it does not need to be split
across multiple member disks.
This is a step towards removing the iovcnt == 1
limitation. Further improvements and simplifications
will be made in future patches before removing this
restriction.
Unit tests need to be adjusted here to not span
boundaries either.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08943805def673288f552a1b7662a4fbe16f25eb
Reviewed-on: https://review.gerrithub.io/423323
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Splitting a 1TB unmap into individual 64KB unmap commands
(for a RAID volume with 64KB strip size) would be awful -
the RAID module can be much smarter about this.
So back out the changes for splitting I/O without payload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I24fe6d911f4e3c9db4b2cb5d66c7236a5596e0d9
Reviewed-on: https://review.gerrithub.io/424103
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Valgrind found this on my system. The unit test itself
was passing correctly (we wrote uninitialized data and then
successfully read back the same uninitialized data) - but
Valgrind doesn't like code that makes any decisions based
on reading uninitialized memory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I762f5dd0cb368328bd5eba9cecf7db404b457fad
Reviewed-on: https://review.gerrithub.io/424109
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
One was an API issue, another was a dereference of a null pointer that
resulted from a possible call to a stubbed function in the unittest
common code, and the last was an erroneous use-after-free due to
scan-build apparently not understanding TAILQ_REMOVE.
Change-Id: I9111817e9e990ff6e388351c08f34c2e945df62d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/423959
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes a use after free error in bdev/bdev_ut
Fixes an uninitialized argument value error in mt/bdev/bdev_ut
Adds extra checks in the spdk_bdev_part_construct code
Fixes a dereference of null pointer error in bdev/vbdev_lvol_ut
Change-Id: I1eaa6ebfec0a36a0d910504c70b16ccc651de22a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/423923
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This removes assumptions about hte lifecycle of these variables relative
to the parent bdev and allows us to avoid ambiguity about who
is responsible for freeing these buffers.
Change-Id: Ia996653562d532fa1501faf21d3fdff85033ab33
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
When a raid bdev is constructed by JSON-RPC construct_raid_bdev,
information about config and slot can be passed to
raid_bdev_add_base_device() and raid_bdev_can_claim() doesn't have
to be called.
Hence extract raid_bdev_can_claim_bdev() from raid_bdev_add_base_device()
and put it to raid_bdev_examine().
Change-Id: I92e02bf3661cb97b691246f32198ba946810d96c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
raid_base_bdev_config is suffciently descriptive as name and so
"name" can be used as the name of the base bdev.
Other structs have used "name" as the name of bdev.
Change-Id: I090ef541a84fd14d9ec3bfebbdc96ae649709551
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423614
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
This patch adds UT for IOV split operation.
Next patch will refactor split of vectored read/write a little.
Change-Id: I77fbaf042fd894b23ad5ae846f54c28498e8e62b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/422768
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For secure iSCSI targets, dynamic reconfiguration of CHAP secrets is
must to have.
Currently CHAP secrets are loaded for every CHAP authentication
operation. The current implementation will not work correctly
when CHAP secrets in the file are changed dynamically.
If SPDK loads CHAP secrets from the file only at boot and they can be
configured by RPCs, user can change CHAP secrets safely during run time.
Even if there are any users who expect dynamic reconfiguration of
CHAP secrets based on the current implementation, if we provide
this better alternative based on RPCs, they will be able to continue to
satisfy their requirement.
This patch change the current implementation so that SPDK loads
CHAP secrets from the file once at boot and uses them in memory
hereafter.
Besides, use fixed size buffers to hold CHAP secrets.
Previously dynamically allocated buffers by strdup() had been used,
but it required many nomem checks and should be avoided.
Other iSCSI targets/initiators have used fixed size buffers and SPDK
follows others.
Set the size of buffers for both user names and secrets to 256 (the
last byte is for NULL termination). 256 is sufficiently large
compared with others.
CHANGELOG will be updated in the separate patch because new RPCs will
be added instead.
Change-Id: I499e792817c2ed01c3d970bbd3d34a6b1fccf65b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421463
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Move most of the target opts from nvmf_tgt to nvmf_transport.
- Update transport create functions to pass in transport opts.
- When transport opts are NULL in transport create function, use
target opts. (for backward compatiblity)
- Part 1 of 2 patches. Part 2 (to follow after part 1 accepted)
will allow independent creation of transport with specific opts
while maintaining backward compatibility with current apps and
rpc configuration that still use the add listener method to
create a transport.
Change-Id: I0e27447c4a98e0b6a6c590541404b4e4be879b47
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/423329
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These tests don't currently require the env mockup,
but they will in a future patch.
Change-Id: Ibf311f198a291f825a83e7b89708cd2442f35f7a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423183
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
According to the purpose of the lists, state_link and global_link
will be enough to understand the purpose well.
Besides, in raid_bdev_remove_base_bdev(), if any entry is not removed
during iteration, TAILQ_FOREACH_SAFE() is not necessary. Hence
change TAILQ_FOREACH_SAFE to TAILQ_FOREACH for this case.
Change-Id: I3022c58faf96721df9241e07dbb5a06d7de89e70
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
struct raid_bdev has a pointer raid_bdev_config to its configuration,
but raid_bdev is duplicated between raid_bdev and raid_bdev_config
and just config may be enough as a name.
Change-Id: I77f6a69b913cd540c22f05803c486a4caf103f24
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/422923
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
base_bdevs_io_channel is good but base_channel may be enough and
fit other bdev modules.
Change-Id: I67a1d224f1ef4ca1fc048b4325333f2552a37150
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/422921
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
raid_base_bdev_info is sufficiently descriptive as name and so
names of member variables in raid_base_bdev_info can be simplified.
Change-Id: I759a758ec0f3ac21de767ad379a902f1b04cc66d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/422919
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
A number of modules (RAID, logical volumes) have logical
"stripes" that require splitting an I/O into several
child I/O. For example, on a RAID-0 with 128KB strip size,
an I/O that spans a 128KB boundary will require sending
one I/O for the portion that comes before the boundary to
one member disk, and another I/O for the portion that comes
after the boundary to another member disk. Logical volumes
are similar - data is allocated in clusters, so an I/O that
spans a cluster boundary may need to be split since the
clusters may not be contiguous on disk.
Putting the splitting logic in the common bdev layer ensures
bdev module authors don't have to always do this themselves.
This is especially helpful for cases like splitting an I/O
described by many iovs - we can simplify this a lot by
handling it in the common bdev layer.
Note that currently we will only submit one child I/O
at a time. This could be improved later to submit multiple
child I/O in parallel, but the complexity in the iov splitting
code also increases a lot.
Note: Some Intel NVMe SSDs have a similar characteristic.
We will not use this bdev stripe feature for NVMe though -
we want to primarily use the splitting functionality inside
of the NVMe driver itself to ensure it remains fully
functional. Many SPDK users use the NVMe driver without
the bdev layer.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife804ecc56f6b2b55345a0d0ae9fda9e68632b3b
Reviewed-on: https://review.gerrithub.io/423024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch series will refactor/improve CHAP authentication and consolidate
it into iscsi_subsystem.c.
To get better reviews, this patch just moves spdk_iscsi_chap_get_authinfo()
from iscsi.c to iscsi_subsystem.c.
Change-Id: I953f5c851bfe67dc02f6f82966132b4216e79228
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/422764
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A new unit test in an upcoming patch will initialize the bdev
layer separately, so modify the existing tests now so that
they properly cleanup the bdev layer after the unit test
that initialized it is complete.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie00837a90391ca4d0dd578e978fb26483fe5c0cf
Reviewed-on: https://review.gerrithub.io/423023
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New function was added in bdev layer to allow
handling spdk_bdev_io buffer exhaustion.
This patch adds that functionality to nvmf bdev.
Change-Id: I5b915abcccec930c3eb684d95bc64482e7887af5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/418937
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
So we don't need to allocate memory (maybe failed) just for free other
memory.
Change-Id: I2c83f6acc2aa6ed79455bff90f952a2e70b44d59
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/422203
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The intents of these arrays was to keep track in the
bdev layer of all base<->virtual bdev relationships -
i.e. which member disk bdevs make up a RAID bdev,
which logical volume bdevs are associated with a
bdev that contains an lvolstore, etc.
Currently none of this is used however. And trying
to keep track in the bdev layer instead of asking
the bdev modules for the relationships has a number
of complications. Early one, we tried to do this
with TAILQs - but that doesn't work since this can't
be done with a single TAILQ_ENTRY in the bdev
structures. So we moved to arrays - that works a bit
better, but then the pointer arrays have to be
realloc'd which isn't ideal.
The biggest problem though with these arrays is that
they held bdev pointers - not bdev descriptor pointers.
It's not really valid to access bdevs without a
descriptor - the descriptors are what make sure active
references are accounted for when a bdev is hotplugged.
Of course the bdev layer knows when a bdev is getting
removed and could go and do the updates to these
arrays separately - but that just seems very convoluted.
So for now just remove these arrays completely. If
there is a future need for the bdev layer to
understand relationships between bdevs, we can add
module APIs so that the generic layer can ask
the modules about the relationships.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99ef1068240bff1262f64f234260cf2fb44df51d
Reviewed-on: https://review.gerrithub.io/420932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
When an SPDK application shuts down, the bdev layer will
automatically unregister all of the bdevs to ensure they
are properly quiesced and cleaned up.
Some modules may want to perform different operations when
a bdev is destructed during normal runtime vs. shutdown.
For example, for lvol, when the last lvol is cleaned up,
it should unload the lvolstore, release and close the bdev
that contains the lvolstore. You never want to do this
during normal runtime though - it is perfectly valid to
have an lvolstore that contains no lvols. RAID and future
bdev modules such as multipath have similar use cases.
So add a new bdev module callback named "fini_start".
If a module specifies a function pointer for this callback,
the bdev layer will call it before it starts the bdev
unregistrations.
This enables some future patches to the bdev layer such
that it will always unregister block devices that are not
claimed (i.e. logical volumes) before block devices that
are claimed (i.e. the bdev containing an lvolstore).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6e87f5c2b27f16731ea5def858f26e882a29495a
Reviewed-on: https://review.gerrithub.io/421175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Decrementing struct spdk_jsonrpc_server_conn::outstanding_requests
should be atomic since this variable are accesed from multiple threads.
Istead of that just route the request back to the server thread with
nothing to send.
As we are here change spdk_jsonrpc_server_send_response() to take only
struct spdk_jsonrpc_request parameter.
Change-Id: I9b856e7d530355cea43a29f58f4f9405e7e35fc2
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/422124
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In RDMA, qpairs can't be removed from poll groups because
the poll group defines the completion queue. So don't
allow this operation anymore, even if it were theoretically
possible on other transports.
Change-Id: I69a3d1b336decd2d25e43ddea94f8b2095ef662f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Memory for socket structure is allocated in the selected net
framework but freed in the libsocket on the higher level.
This patch moves memory free to the net framework implementation.
Change-Id: Ia3d4e1553a858a38beb390986e9af105778c12c7
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/421587
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unify the regular mocks and the pointer mocks. Simplify
several of the #defines.
Change-Id: Ica8c69dbb70a685a55b5961b73fd7872f451c305
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/418884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Claim the block device when adding it to a new Namespace,
and prevent the block device to be added twice for other
modules and Namespaces. Also remove the test that using
same block device over different Namespaces.
Fix issue #371.
Change-Id: Ib7ce18e9fde4a15c0f19ce9e28e69145e54570e0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/420472
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During IO submission, raid_bdev can be get by bdev_io->bdev->ctxt.
Hence holding raid_bdev in raid_bdev_io_channel is duplicated.
Change-Id: I722432718aca8c5846541816b6ecca56821d77f6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421182
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Locating spdk_bdev structure to the beginning of raid_bdev structure
will simplify the hierarchy and match other bdev modules.
Change-Id: I1bfbf773bc96a4f144e6bff772ade05bb42762e9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420818
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The poll group pause, resume, remove, and add functions are only called
from the subsystem_state_change_on_pg function. Previously, they would
return immediately and the state change would move on to the next
channel. However, some of these functions (specifically remove) kick off
asynchronous APIs and we should not iterate past them until those
asynchronous operations complete.
Change-Id: I78804273b39f2d171ba26ac4478ad515356833f3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419289
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Use strdup for all strings allocated by JSON decoder and free them on
all paths.
Change-Id: Ia30d32c2fd6bd79f62588ca19bd3bb093d38a502
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
For front-ends like iSCSI (and NVMe-oF in the future)
which want the backend to specify the data buffer, the
RAID module doesn't copy the pointer to the allocated
buffer from the child IO back to the parent IO. It
really can't copy the pointer - the child IO owns it
and will free it.
So the RAID module needs to allocate the buffer first
and then pass it down.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b1eceac9b1cdd26130e59e1d400c9869a19f881
Reviewed-on: https://review.gerrithub.io/420677
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Previously cluster sizes only set as default were tested,
this patch adds test for load when different cluster_size is used.
Change-Id: I585adff25c81de809435ef235314cd4b8b116261
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/420607
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
At times, it may be necessary to free requests without completing them.
For example, when freeing a qpair, one needs to free the AER sent from
the host before deleting the qpair. It is important not to send a
completion for the AER because:
1. According to the spec, this will trigger the host to send another AER
2. No Asynchronous Events have occured, so we should not complete the
AER.
Change-Id: I92e163f0fed0ee2bc942569a647cb3c1967edec9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419732
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since destroy_lvol_bdev was implemented, it is now more convinient
to call destroy/unload for lvol store explicitly.
Rather than using lvs struct to pass a request checked on each
lvol close/destroy.
Change-Id: I56ee626e96f8752909d1584a20fe3345c5607fdc
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/420285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is not an error if bdev is smaller than cluster size so convert this
error to infolog. This fixes false error message dring examine process.
To return proper error message when creating blobstore using RPC the
_spdk_bs_alloc was adjusted to return errocode that is propagated up and
converted to "No space left on device".
Fixes#316
Change-Id: Ic9803720a55125fcfa34263346f2d9e1aae03a53
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/420054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch fixes lvol delete behaviour.
First, we look if there are any dependencies that disallow lvol deletion.
If there are any (i.e. dependent clones) we fail.
Otherwise we delete lvol and unregister associated bdev.
destroy_bdev no longer deletes lvol.
Fixes#345
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I99e6abded2ed3ae2742103f81fc7eb937ad1cab4
Reviewed-on: https://review.gerrithub.io/407402
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
