When tested on Linux 5.8 kernel and configure spdk
with debug mode (--enable-debug), and test SPDK NVMe-oF
tcp transport, and we see the coredump in sock_map_release
with the following statements:
assert(entry->ref > 0);
After debug, I can confirm that the placement_id value got
from the following function (sock->net_impl->get_placement_id)
changes.
It means that: When the sock is added into the poll group
(spdk_sock_group_add_sock), we get the placement_id (named as
Value(begin)); and when the sock is removed from the poll group
(spdk_sock_group_remove_sock), we get the plaemednt_id on
the same sock (named as Vaule(end)). I found that
Value(begin) ! = Value(end).
So our solution is for a socket, we will get placement_id once,
then we can solve this issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia1d0cf39247b53410260561aca5af38130cc0abb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3983
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Similar to internal vhost library, rdma lib should be ignored
if SPDK was not compiled using --with-rdma.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic747f96f96182c04592bec44ff64ceafd11634f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3963
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Additionally, fall through potential yum failures to try and install
what's available in repos given system is using.
Change-Id: Icf7f5f3db1d72b67414c7d7e4badb8416a9d25b1
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3873
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For some RHEL releases, especially 8.x, EPEL repo is crucial in order
to install most of the package dependencies, hence we need to make
sure it's in use.
Change-Id: Iaaa1f901e6fffddb65b98fa98b21b9e77e59760f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3872
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
On rhel 8.x standard appstream and baseos repos don't provide python
package. Use python36 instead as it's available there.
Change-Id: I125aa3370bdb11f67f2774e00e70196df9680f13
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3871
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This limitation may simply fail if /usr is part of a separate
mount|fs so softlink it instead.
Change-Id: I1e0387c2792c0bbd20d83e9739b3882a7cbbbf50
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3870
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will use it earlier in this file in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I554f2073185d466bd0b4e98bdeec721f763c1b44
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3969
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When claiming clusters as part of blobstore initialization
or recovery, just call spdk_bit_array_set directly rather
than going through the bs_claim_cluster function. We will
be modifying how runtime cluster allocation works so need
to separate the two use cases. This code is very small so
inlining it has minimal code impact.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaaa1c817e57b4a2eea62eb4683407364bac1fcc0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3966
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These functions were added during FTL development and
are more efficient than the roll-your-own implementations
blobstore had previously.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie09e5c305e6e171af0258e805f2aac3b88822b5e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3965
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Run two iSCSI target applications, the first application has a
public portal 10.0.0.1:3260 and the second application has a private
portal 10.0.0.3:3260.
Each application creates a target which has the corresponding portal
and a NULL bdev. The NULL bdev has the same configuration between
two applications.
By using NULL bdev, we do not have to worry about shared storage.
Then move between two portals by using temporary login redirection
function.
We tried to differentiate only TCP port but such idea did not work
with the popular iSCSI initiator, open-iscsi.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I578f3b57d738ade6da74a0ec3d7fbb140139669d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3440
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To test iSCSI login redirection feature, we need multiple IP addresses
for target application. Furthermore, it is nice if multiple iSCSI
target applications run.
This patch creates such network virtually using veth device and
ether bridge but keeps compatibility even after this patch.
Create three veth interface pairs and one bridge. One pair is for
initiator and two pairs are for targets, and all pairs are
added to the same bridge.
Create two network namespaces for targets and add one pair to
the first namespace and add another pair to the second namespace.
Namespace is not created for initiator.
Necessary connectivity is tested using ping after creation.
iSCSI login redirection test code will follow.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If0ca7b4a7af652602f3d6a7ea5669a06ce41a5f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3887
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When using --dif-type option --md-size should be
required as well.
Update & improve bdev_null_create rpc.py help
messages as well.
Change-Id: I6588a97aef6c8792bab7a41ece17c0461bb36844
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3949
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allow toggling log timestamps on and off by adding new RPC call.
Change-Id: I34c84bf89fae352ade266fbf7fd20594ff67bced
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2024
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The type of sendmsg_idx is uint32_t, so the maximal
is 2^32 -1, so it could be overflow and get 0, so
we should fix it.
PS: I think that our code may have potential defect.
In my experiment, I try to init sendmsg_idx with 2^32 -1,
so the first req->internal.offset = 2^32 - 1.
But for the ee_info and ee_data in "struct sock_extended_err"
got from _sock_check_zcopy is all 0 in the target side.
So it means that the this req will never be completed.
With the increase of sendmsg_idx (the type is
uint32_t), sendmsg_idx will finally goto 2^32 - 1, so I
think it will still kick the issue I described.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic9aaf629d73d5b7e2c81800a4f7f92c728adbc34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add an abstract method in Initiator class to get
rid of pylint "no-member" error.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I83ac1a498d55f6390a5b36038a9532121a9e5d0a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3922
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use --dif-type and --md-size option for bdev_null_create
rpc when creating null bdevs. Needed for DIF/DIX comparison
tests.
Change-Id: I15de25d498ff7c239cfca291e10aa16acb4f09eb
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3919
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
So far only single null block device was allowed in
the setup for the purpose of latency measurements.
Rename setting to "null_block_devices" and use an int,
rather than a bool, so that multiple null block
devices are created.
Change-Id: Id543cf3bfbc7d9c171f8605909e1971cabbdfcc7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3900
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Patch (922d90c8) removed backtrace printing.
Some of API was leftover in header files,
so this patch removes them.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ieb2069e707dee2a196f0cecc283064661a0ae9a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3953
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove assert and add exit codes instead. That in non-debug mode, these
could lead coredump. We don't want the vhost target be crashed after
recieved invalid commands.
fixes issue: #1575
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ifef6d8f9c32150213bc2c80787e92d428d4c49c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3951
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
rocksdb.sh is run independently from the autotest.sh as part of the
BlobFS-nightly-autotest job. In case a rogue file lands in the dir
where the results are stored, i.e., a core dump, CI may fail to fetch
the artifacts due to not sufficient permissions. To avoid that, make
sure cores are always processed as part of the test.
Also, adjust permissions across the entire $RESULTS_DIR, just for the
good measure.
Change-Id: I8df7799cc7ed7424950cc26250597a0e2d73bc9f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3943
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
cpumask can be changed by spdk_thread_set_cpumask()
during the time that event takes before it arrives
on _schedule_thread() function, which would make the
function assert(false), even though that is ~ok~.
Currently, that can happen right after thread is created
or between two successive calls to spdk_thread_set_cpumask().
But most importantly, it will constantly happen if we
introduce rescheduler.
This patch just disables the check for now.
Change-Id: Ie6dfe22d6eff2c908c367d1311436cc6769a6960
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3905
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the PDU receive handler processes the header of the logout request PDU,
conn->is_logged_out is set to true.
However, if conn->is_logged_out is true, conn->pdu_recv_state is set to ERROR
before the PDU receive handler completes processing the logout request PDU.
Then if conn->pdu_recv_state is ERROR, conn->state is set to EXITING
after returning from the PDU receive handler.
Response PDUs are sent asynchronously now and may not be sent even after
returning from the PDU receive handler.
On the other hand, outside the PDU receive handler, the current connection
is closed if conn->state is EXITING.
Hence logout response PDU may not be sent to the initiator.
For the case that the initiator logs out and then reconnects when receiving
asynchronous logout request, missing logout response is critical
because initiator waits until receiving logout request and gets timeout.
This patch moves the check if PDU comes after logout to the place
just after getting a PDU header.
At the new location, data segment of the PDU is not received yet. But
logout request PDU does not have data segment and initiator will not
send additional PDU after sending logout request PDU, and by this patch,
iSCSI target will continue to stop receiving any new PDU after processing
logout request. Furthermore, even if there is any remaining data in the
kernel buffer, the kernel will discard or flush it when closing the socket.
Fixes issue #1571
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9554f4d54f3db80bf86abd6bffe81bac8c234531
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3928
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
ANA transition time shall be non-zero if controller supports ANA
reporting. Linux NVMe host sets this value to 10, and we don't
have any reason to change from that.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I61396695dacf47fad40e3cea3311e555729d9e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3909
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Registration macro now generates function based on driver's name.
It allows to have multiple registration within single source file.
Similar pattern is used e.g. by SPDK_NVMF_TRANSPORT_REGISTER.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ied0887e8dae7fe9ca1517313be5eff8f218b7e98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3895
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is done to be more conscious of what net|rxe devices ar currently
in use to make sure we don't unnecessarily write to infiniband class.
Also, this makes use of net/infiniband class more consistent between
both the add and remove actions.
Change-Id: I0ba3bc3a14047e12a804bfdf3aca8c089d34d6b0
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3825
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used in another place later.
This patch is part of a series aimed at improving recovery
when we are fail to change the subsystem state.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I24bfbeb3d006584003164540d6ede540dbcafa86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3392
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
- reorganize the code to cleanup main loop
- other small syntax improvements
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I0a2b9ac9e78db2f96ed49d3e7e4d938425c76fa9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3720
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
