Add uninstall target to makefiles to be able to perform
reverse of install target.
Fixes#464
This patch adds 'uninstall' target to makefile.
'make uninstall' will remove spdk_tgt app, headers, libraries
and shared libraries from system directories defined by $DESTDIR.
Additionaly, if there will be any empty directories left after
this operation, they will be removed as well.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7b07fb4b81081d3914ff09165991fbe3a26b9067
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most of our bash test scripts source autotest_common.sh
to be able to use some autotest-specific functions like
timing_enter(). The same test scripts allow specifying
custom command line parameters without actually realizing
that those parameters can be potentially picked up by
autotest_common.sh as well.
For example, if particular nvmf tests are run in "isolation"
mode by being executed with the first param set to "iso",
and there is a file named "iso" in the current dir, that
file will be sourced. This could be bad.
In this patch we stop sourcing or even processing $1 in
autotest_common.sh. Instead, the test configuration will
be sourced just once from autobuild.sh, autopackage.sh
and autotest.sh. If the user wants to run particular test
scripts manually, he should source an SPDK test configuration
by himself - manually as well. In most cases he won't even
have two, as only a few test scripts depend on SPDK_*
variables.
Note that we still have to setup the default values for
SPDK_* variables in autotest_common.sh because some of
our test scripts actually depend on them:
> if [ $SPDK_TEST_RBD -eq 1 ]; then ...
Because it lacks any type of quotes around SPDK_TEST_RBD,
it will print the following message when that variable
is unset:
> /bin/bash: line 0: [: -eq: unary operator expected
It doesn't trigger any error ($? == 0), but can be still
a bit misleading in the script output.
Change-Id: I350045d8582d66fe1ed7697d4bcbba324cb541ad
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In SPDK, we will build isa-l with no shared option
and then integrate it into SPDK. And we do not need
to install isal in the system libaries.
Note: ocf build in autobuild.sh now needs to build
include/spdk/config.h before building the ocf library,
to ensure that header is available in a clean build
environment.
Change-Id: I3f0ce6932b386de17a77cf5bfdfd738b22417e2d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
Add SPDK_TEST_CAS suite
Add basic integrity test with multithread-multidevice fio with cache
modes WT and PT
Change-Id: If2916558894d9f7efd9628eb99f7338c90b312b1
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In a couple of cases, we do specify --ignore-submodules
for the actual check, but when dumping the results
to the console, we omit the --ignore-submodules. Fix that.
Same for check_format.sh - don't consider submodules for
files changes that suggest a CHANGELOG.md update.
This is in preparation for adding isa-l as an SPDK
submodule. isa-l doesn't use any .gitignore files, so I
want to make sure we're just ignoring anything related to
isa-l build artifacts. We could probably remove our
local DPDK submodule patch to its .gitignore after this
patch but will leave that for another time.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id9be9ce87569004c426d02c6cd44d645f3ff859f
Reviewed-on: https://review.gerrithub.io/c/440808
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is preparation for including build configuration in fedora
devel package.
Change-Id: I174e2a9392a2be2efa9d8032cb8c4d8360208781
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/427909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This was not being tested on every patch previously.
Change-Id: I0a1756f3709da6608f66a2160962ed9b0fb38c7b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424890
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a somewhat temporary workaround for avoiding git status
errors related to symlinked files in the DPDK submodule. The
build pools will be fixed to not change symlinks to regular
files when copying repositories between systems, but until
then apply this fix so we can move forward with switching
to DPDK 18.05 (which now has symlinked files in its
repository).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a6df76fb77a6f3ee3817bd975d198ae4cc3014a
Reviewed-on: https://review.gerrithub.io/420444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I28a6882e9806f3d967308bc0370aa3e099fbdcaf
Signed-off-by: Ed Rodriguez <ed.rodriguez@netapp.com>
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/416051
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We could set WARN_AS_ERROR = YES, but that will just
bail when the first error is found. So instead just
fail the build in autobuild.sh and the submitter can
look at doxygen.log to see what went wrong.
Also change how doc make output is redirected to
doxygen.log, so that the commands show up in the
main build log instead of doxygen.log. That
makes sure we can treat an empty doxygen.log file
as a successful test.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id3030d26e65c6c633b61855754e93b8b0b38b263
Reviewed-on: https://review.gerrithub.io/415873
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This driver was added to allow benchmarking of the SPDK user-mode I/OAT
driver vs. the Linux kernel I/OAT driver; however, this isn't a
particularly interesting test, since the kernel I/OAT driver is totally
inaccessible from user-mode code (it is only exposed to the in-kernel
dmaengine framework).
Maintaining an out-of-tree kernel driver for the sole purpose of
benchmarking is out of scope for the SPDK project, so remove the kperf
driver and test harness.
This can always be retrieved from git history if needed later.
Change-Id: I0ced6e8a88de2cf09a6c0970dfef0ae8f357f193
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6a63d70060cbaa3416cb6980092113b88baf593d
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/406024
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Not sure how much this will help as there was already compiler
info there, but added uname, moved it up in the log a little
but (I think) and put some markers before and afer the info.
This is to help folks determine what OS & tool chain versions
the CI tests systems are using.
Change-Id: I49d2de09a8d8e5fbcdfa07ad2ce20adfc250d4e3
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/404416
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is the first step in reorganizing the spdk test heirarchy.
Change-Id: I83467653af2da2a53251649092bed6902d6cb86e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also 'build' these targets in autobuild.sh - this will print out
the compiler versions to the build log.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e0a1d01e72b1ee0f67e46ad224c02863c7b0d74
Reviewed-on: https://review.gerrithub.io/399432
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also tweak the 'scanbuild_make' timing marker so that it is only called
'scanbuild_make' if scan-build is in use.
Change-Id: I413b8a7cfd4eb2c1090dd73e78aef4ba563d0cc5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398995
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For now, this only installs libraries and headers; we will need to
consider which binaries should be installed and what they should be
named before we add them to the install rule.
Change-Id: I78dc8631f793d0df88cd884b0ac66406df9e4427
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/387637
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This copies the top-level CHANGELOG.md into a temporary doc/changelog.md
file so it can add the Doxygen-specific {#changelog} name tag.
Change-Id: I2fb3087dc15036e58cb7719f67c434897c39821c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375251
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The check format script does not run properly under the version of git supported by centOS 6.
Change-Id: If6ebf25bcf40791e1a12d358d2d478367c927e82
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/367616
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The ioat kmod does not compile in some earlier versions of the kernel.
Change-Id: Ifcca9723c946228c71aba6a9726991fe2122d101
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/367615
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ife2dc741b7d9abe7e3aee6db6e5ad21a0170971c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/366333
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a configure script in the root of the repository
that looks and feels like one that would be generated
by autotools. This script simply generates a CONFIG
file for you, which used to be done by hand.
Now to build SPDK you can do the following:
./configure --with-dpdk=path
make
Change-Id: I44ebb91f0cb1468b86da4c0033ac1406595d4967
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Rather than tracking whether something failed earlier in the script,
ust allow the error code to trigger 'set -e' and exit.
Change-Id: Ie41c3c680f6bdfe53025263d2cf0da959350f9be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When /usr/include/rbd and /usr/include/rados
are detected, enable rbd compilation in autotest.
Change-Id: Ibcd8d444b83402af1996b1e382be204a87dbc6e9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Add a top-level index page and convert the I/OAT and NVMe main pages
into normal pages.
Change-Id: I4e7c8d2fd43303a8aa56de921037dac96fe8a1a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
With a reasonably fast machine, the full build can take less than a
second.
Make sure that at least one second has passed so the stat output will
differ when testing Makefile dependencies.
Change-Id: I462944d00c9c2ace2f6a1a7d6dadec4f77c25784
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Collect coverage information for use with gcov.
Coverage is disabled on FreeBSD because the current version of clang
provided by FreeBSD can't successfully link with -ftest-coverage enabled
(the compiler-rt support libs are too old).
Change-Id: Icc444936caa852bfb9a02b37223209319a27a770
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move dependency includes into a new spdk.deps.mk file,
then include it at the end of Makefiles that build
source files.
Also add a test to autobuild.sh to confirm that
binaries are regenerated if we make after touching a
header file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If6a1905706a840f92cbdf3ace7fbdb27fe2de213
