Implement a poor approximation of reset handling for the RBD bdev so it
can pass the bdevio tests.
This should be replaced with a solution similar to bdev_aio, which waits
for all outstanding I/O to return before completing the reset. However,
this should ideally be handled by the generic bdev layer rather than in
each individual module.
Change-Id: I1be2bf90875e23e05efdebb003e5412f3fc43793
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401273
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, the RBD bdev only supported a single iovec entry, which is
not sufficient for the bdev API.
Change-Id: Ic18257bae0363b9c01e091547e5b41bae0a21e9a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401259
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During converting type of CHAP params of target from int to bool
for JSON, changed names of them to be consistent with others.
In this patch, adjust variable name of struct to of JSON.
Change-Id: I1ccbfa11d57479dc55680835eb80e111bd24d9a3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400928
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Besides names of variables and parameters about CHAP are not unified
between JSON-RPC and SPDK internal. JSON-RPC's wording looks better
and adjust SPDK internal to JSON-RPC.
Change-Id: I89bcd1ce13a11f7d63a62d51ef094dd302186d37
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Change-Id: I44348ec404cae8882086a1a71a65914c9bafccc3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds a iSCSI poll group for each core,
thus we can poll a group of connections instead of one
by one on each core.
Change-Id: I9cd82c8c0f7f6e7b3ee34034339638199bfca5da
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399565
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These new names are much more clear and are aligned with other
functions such as spdk_blob_close.
Keep the old names around for now but deprecate them. We will
remove them in next release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idc60fd0b19fa2a8b0247a1f5835774d342e721f9
Reviewed-on: https://review.gerrithub.io/400884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is needed for an upcoming change which will
prevent metadata functions from being called on
threads other than the metadata thread. Without
this change, there was no way for this function
to return an error if it was called from the wrong
thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67e591140194ff6ad250878168f6b166a1ff2282
Reviewed-on: https://review.gerrithub.io/400883
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There was some thinking that we would need to allocate
I/O channels on a per-blob basis to handle dynamic
resizing during I/O. Making spdk_blob an opaque handle,
with the existing spdk_blob structure renamed to
spdk_blob_data was a first step towards making that
happen. But more recent work on blobstore has
simplified the resizing approach, so this spdk_blob_data
is no longer needed. So revert it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22e07008faceb70649ee560176ebe5e014d5f1a3
Reviewed-on: https://review.gerrithub.io/400881
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will let us e.g. read device blocksize in the
upcoming vhost-blk initiator. All the public API
was already there - we've been using it for
virtio-pci. Now we're making use of it for vhost-user
as well.
Change-Id: I39eab820bb9bbff59c8b8efa79cc97d2ec7806fd
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398828
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02ca8aed1bba1922a69a9b22bca22bce06e9c55f
Signed-off-by: Pan Liu <liupan1111@gmail.com>
Reviewed-on: https://review.gerrithub.io/399536
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The default method for building DPDK now is via the submodule, and users
that explicitly want to link a different DPDK need to specify its path
during configure. Therefore, nothing should be depending on these
hard-coded paths, and we can remove them.
Change-Id: Ic7d70ef10c46f9711691fb804f7dc854e05f7ed1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401075
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
With recent update to bdev.c for its io_device_register
handle for new bdevs, several modules can now just use
their respective structures defining each bdev rather
than picking a more complicated one.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8ea24c64a782e54d18b6241e36f56dbbbb5f1e7
Reviewed-on: https://review.gerrithub.io/400555
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Many bdev modules create their own bdev structure
with spdk_bdev as the first member. bdev.c currently
uses the spdk_bdev pointer as its io_device handle,
forcing bdev modules to pick something different.
Change this to use the spdk_bdev pointer + 1 bytes
as its io_device handle. The actual handle does not
really matter - it just needs to be unique. This will
simplify bdev module development.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b6da3be9c16c87bc7a393c3a2221c6bae26e0a5
Reviewed-on: https://review.gerrithub.io/400554
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This can be enabled with -t nvme in debug builds.
Change-Id: I4392d0a7decd65cc567fdf6fd56cac6db0424cd8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function returns uint64_t, but the existing code was returning
the bool 'false' (which is also 0, so there is no functional change).
Change-Id: I546b15974c2d9e4107efe262950e3eb5613e0e9f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401051
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unify several similar functions checking for a buffer of all zero bytes
into the util library.
Change-Id: Idfbeffa22add34ac9ed1bd75ee27d6bd8b188940
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Supporting sock_groups with multiple spdk_net_impls
is a bit tricky. We cannot just allocate space off
the end of spdk_sock_group for the implementation-specific
details - we need separate allocations for each
spdk_net_impl so that one spdk_sock_group can handle
spdk_socks from multiple spdk_net_impls.
Unit tests will come in upcoming patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1570862a044192d30a79224f6029bf3d8157ce80
Reviewed-on: https://review.gerrithub.io/400528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
JSON format of bdev_name_id_pair is different between
construct_target_node() and get_target_nodes().
construct_target_nodes() uses the following format:
"lun_ids": [
1
],
"bdev_names": [
"Malloc0"
]
get_target_nodes() uses the following format:
"luns": [
{
"lun_id": 0,
"bdev_name": "lvs_1/lbd_1"
},
]
The second format is better than the first format. Hence unify to
the second format.
Change-Id: If097e41ada0f2fe3754691cee0a0774db97c4ebb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/399993
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the following JSON-RPC:
1) get_target_nodes
2) construct_target_node
3) add_pg_ig_maps
4) delete_pg_ig_maps
JSON format is not unified yet.
1) uses the following:
"pg_ig_maps": [
{
"ig_tag": 1,
"pg_tag": 1
}
2), 3), and 4) use the following:
"ig_tags": [
1
],
"pg_tags": [
1
],
the first format is better than the second format. Hence unify to
the first format.
Change-Id: I6cc19115001b9c9ba9db5c87db1def7c0b3bd80c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The list of net impls doesn't need to be visible outside of sock.c.
Change-Id: I8def009acb82e5cd6f1e13e797079c1a94e3c7da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400864
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The CFLAGS in these files add unneeded include directories.
Change-Id: I742a75b7ce5bff2f1dfd6f92d99ebc99a1936666
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/400862
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_sock_group_impl represents the implementation of
a sock group for a given spdk_net_impl (posix, vpp, etc.)
This extra abstraction is required for enabling
spdk_sock_groups with sockets associated with different
spdk_net_impls.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7a380cc62c59bdac98996faf0387550c234165a0
Reviewed-on: https://review.gerrithub.io/400527
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also convert the primary spdk_sock/spdk_sock_group
routines to use the spdk_net_impl abstraction
instead of calling the posix routines directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6ae8f4aae619f326f28c40f28a387ada1b263e27
Reviewed-on: https://review.gerrithub.io/400335
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the framework for providing multiple implementations
of TCP sockets in a single application. This patch just
adds the framework - upcoming patches will convert the
existing POSIX implementation to use this framework.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07951e71f344dfe7689c818a13d7e7113c826643
Reviewed-on: https://review.gerrithub.io/400334
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This moves the POSIX specific pieces (namely the
file descriptor) out of the common sock/sock_group
structures and into posix-specific structures.
Note that the first member of these new structures
is the respective base structure - which allows for
simple casting between the generic and implementation-
specific structure types.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie80800e66b792627fc9dc056cbdd1fd8991f0b22
Reviewed-on: https://review.gerrithub.io/400333
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Have the main spdk_sock_group_poll_count routine
just pass an array of sock pointers to the posix
implementation function. Then the posix implementation
can just fill out which spdk_socks have data and let
the caller do the callback routines.
This moves a fair bit of code from the posix implementation
to the common code, which will simplify the upcoming
VPP implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I547821ce9875777448f433cae59e316a45c259f6
Reviewed-on: https://review.gerrithub.io/400332
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Parts of the close code (for both sock and sock_group)
is generic and will apply to every net implementation
(POSIX, VPP, etc.) - so move that generic code now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50b5b272b6af219a516c18c41eee5a2e00bf034d
Reviewed-on: https://review.gerrithub.io/400330
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a step towards abstracting the posix implementations
of these functions behind an upcoming net_implementation
abstraction. This will allow for use of multiple TCP
stacks in parallel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1ed7d8ae3f1a585ac7a503335c958ebb68fd057c
Reviewed-on: https://review.gerrithub.io/400329
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In early days of SPDK, there was an experimental userspace
TCP stack called libuns. The SPDK iSCSI target supported
using either the default POSIX/kernel TCP stack or this
libuns TCP stack.
libuns is no longer in use, but work has started on
supporting the FD.io VPP TCP userspace stack. Abstractions
are being put in place to allow *both* the POSIX and VPP
stacks simultaneously.
So remove the concept of a "default" net_framework that is
defined with weak symbols that can be overridden by another
object file. While here, also remove the "clear_socket_association"
concept which was specific to libuns.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a0385ca5ae113e34a637f835d8d69f8d510433e
Reviewed-on: https://review.gerrithub.io/400328
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This avoids recursion in the case where the remove_cb
immediately closes its open descriptor, resulting in
a second call to spdk_bdev_unregister without unwinding
first.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I093786f13bb2953b8f08888a668a045581a9f81c
Reviewed-on: https://review.gerrithub.io/400305
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_vhost_dev_has_feature() is internal function so we can move it's
declaration to header file. This remove function call overhead.
Change-Id: I1704e8279cd6720177047a1ae8818f68982998db
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/400241
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
adding nvme_ctrlr_destruct_finish because nvme_transport_ctrlr_destruct may
use a destroyed mutex.
nvme_ctrlr_destruct() free "ctrlr_lock" and after that call
nvme_transport_ctrlr_destruct()->nvme_pcie_ctrlr_destruct()(with pci)->
nvme_ctrlr_proc_get_devhandle()->nvme_robust_mutex_lock(&ctrlr->ctrlr_lock);
Change-Id: I55714ea9097d2c9d844a00b5a88fa2d51a3f4469
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Reviewed-on: https://review.gerrithub.io/399605
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add optional parameters to namespace creation to let the user pick the
namespace globally unique identifier and EUI-64.
Change-Id: Ia3eebaf22f8a64733a00a83f90cafb4977c2d07a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399531
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ice343afdc84c2a11cd9026d128a35f7a62aa7125
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/398933
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will allow more parameters to be added to
spdk_nvmf_subsystem_add_ns() without breaking API/ABI compatibility
later.
Change-Id: I6b2f58f1a2d5fcd4c754830cbd4713dc461a31fc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399519
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The subsystem->ns array may be resized with realloc(), so old ns
pointers can become invalid.
To fix this, allocate each ns as a separate object, and change the
subsystem->ns[] array to point to the namespaces rather than containing
them.
Change-Id: I873502fa90cf840e4eaa9b1abd94a95afe0f737f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399726
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reduces some code duplication and ensures all
successful load operations (whether or not it included
recovery after power fail) through the same function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia463ce6ebe976ab2420525d86962e8fe54ad04d7
Reviewed-on: https://review.gerrithub.io/400164
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is a preparation to match response of dump with request
of construct (load).
Change-Id: I08d0e860ecd842fabf2bbea0b888a60ffd51b055
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/399992
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is used to solve
https://github.com/spdk/spdk/issues/235
With multiple core bining for NVMe-oF target,
the qpairs which belonging to the same ctrlr may
be scheduled to different cores. Thus there is
resource contention to access the struct spdk_nvmf_ctrlr.
And we put the thread info in polling group. Morever,
we introduce an admin_qpair in ctrlr. Since admin_qpair will
always be created at first and freed at last, to reference
this pointer is safe.
Change-Id: I12ac26f9e65b4ed8e48687750046455af0e3be1d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/398904
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding new initiator to an existing initiator group to allow login
will be usual. This patch support the following JSON-RPC commands:
- add_initiators_to_initiator_group
- delete_initiators_from_initiator_group
Both initiator's name and netmask are optional but already added
name or netmask cannot be added.
Test code is added too.
Change-Id: Ic101210b9d00c2b36e37ece23fcba8cfe8e44eb8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/398361
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Patch 808a2b05 [1] fixed overflow of avail entries count,
also fixing indirect descriptors support. Without indirect
descriptors, we usually didn't manage to fill entire queue
- there were always a couple of descriptors left. A couple,
but not enough to form a vhost-scsi descriptor. Indirect
descriptors, however, are 1-descriptor long. They have higher
possibility to fill entire avail queue, and that's why they
used to fail more often. But we can safely reenable them now.
[1] 808a2b05 ("vhost: fix overflow of avail entries count")
Change-Id: Idec8568cdfc1255fb578e5d18f5c476a4c034d2d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396805
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reallocate the send buffer if more data is written by the RPC handler
than currently fits in the buffer.
Change-Id: I590dd173b843aba48c768adfafaf87e4b47bcc19
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399925
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to solve
https://github.com/spdk/spdk/issues/235
in the later patch.
Change-Id: I8ef6d3effbff7a6b27e82c397969687d0000542b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399349
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The cpuset API is const-aware, so we can safely
return const cpuset here. This will simplify
future usages of this function - for now it remains
unused.
Change-Id: If849ed49056a54035fb7a6eccde84121630f9974
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399457
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, the maximum core value was cached in a static variable, but
this isn't safe if multiple threads are calling at the same time.
Iterating over all core numbers is not very expensive, so just
recalculate the value for every call.
Change-Id: I4fab072f4a96ecc8801e1db293b3921a6f1534f9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399930
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This doesn't really fix anything as rte_vhost
logging functions are extremely poorly designed
and do smp_wmb() by themselves - but only if
logging is enabled...
Let's move the barrier in our vhost.c. This
doesn't change any behavior, but makes the code
more readable. It surely looked weird to update
the ring, log it, and then do smp_wmb().
Change-Id: I90827b14292b60bd5641a48d546e7249a0496a4b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398326
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This feature is not particularly useful for storage.
It forces us to read additional vq memory on each
I/O completion and that's quite expensive.
Quoting VIRTIO 1.0:
```
VIRTIO_F_NOTIFY_ON_EMPTY (24)
If this feature has been negotiated by driver, the device MUST issue an
interrupt if the device runs out of available descriptors on a
virtqueue, even though interrupts are suppressed using the
VIRTQ_AVAIL_F_NO_INTERRUPT flag or the used_event field.
```
Later on:
```
Note: An example of a driver using this feature is the legacy networking
driver: it doesn’t need to know every time a packet is transmitted, but
it does need to free the transmitted packets a finite time after they
are transmitted. It can avoid using a timer if the device interrupts it
when all the packets are transmitted.
```
Change-Id: I7f53293bf811a4cd5ae8e42e18f35042ea6f4ba8
Suggested-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398325
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is required only for event index,
which we don't support for now. The whole
NOTIFY_ON_EMPTY feature is about to be removed
soon. See subsequent patches for details. If
necessary, this should be re-implemented in a
different way.
Change-Id: Idd0c1ab929eef46e692834ffdc62472fa0f6fb74
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398324
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Drop max vhost initiators limitation in SPDK (64).
We're still limited by rte_vhost limits, but
they're set to 1024 at the moment.
Change-Id: Ia1ad25665d6e798bc22709cdd43b72d60f1f4cf0
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/389811
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now, this provides common abstraction for Linux epoll
and FreeBSD kqueue. It also provides the basis for future
changes where alternate userspace TCP stacks have their own
mechanism for polling a group of descriptors.
While here, remove old epoll/kqueue code in iscsi/conn.c that
was commented out when the iSCSI idle connection code was
recently removed - we now have a real implementation of it
in sock.c so the original code is no longer needed as a
reference.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I664ae32a5ff4d37711b7f534149eb0eb35942335
Reviewed-on: https://review.gerrithub.io/398969
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Patch adds internal version of xattr functions to allow
operations on internal xattrs, which are not visible to
upper layers.
When there is at least one internal xattr set, also
SPDK_BLOB_INTERNAL_XATTR flag is set in invalid_flags to prevent
loading this blob in previous spdk versions.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Iec918ec858f069f7cd9f36d5e8f0495ffa4a42d8
Reviewed-on: https://review.gerrithub.io/395122
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I2a3c7a272dc08be5a5ecb4339622816482c4cbb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397036
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Enable address translation for I/O buffers within the controller memory
buffer region by registering the CMB using spdk_mem_register().
Change-Id: I44829757ad15fbc3ea96fa494b9fb32dd67a7138
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/397035
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a new virtual to physical (vtophys) method for
spdk_vtophys_notify() that works for PCI memory (namely NVMe CMBs and
PMRs). This new method searches all the BARs on all the detected PCI
devices to see if the vaddr resides inside any of them.
Change-Id: I68afbeffd958cf40c1e8652e13da5531811b522b
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/398872
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This must've been overlooked in patch 601bcbcf.
Fixes: 601bcbcf66 ("util: extend cpumask to hold more than 64 cpus")
Change-Id: Ia7e06fcacba5cd99770b81542678550e9fbc3ca2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399455
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reason: In spdk_nvmf_subsystem_destroy, we call
spdk_nvmf_ctrlr_destruct(ctrlr), and this function
will still use the transport, so definitely, it is
a defect(reproduced in my platform).
So we need to defer freeing the transport resource.
Change-Id: I3eee2a29c223e2759a623604485af6f081746581
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399368
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This internal function was now being used in one
place only. Inlined it so there's less code.
Change-Id: Ide52494d0e0f9563ce35ef7bf9166f62734a8309
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399440
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added vdev->id field and refactored the hot
vhost external event code operating on
g_spdk_vhost_devices array, so that we will
be able to switch from that array to a linked
list with unlimited capacity more easily.
This patch does not change any functionality
on its own.
We would very willingly reuse vdev->vid here,
but it's available only on devices with active
connections.
Change-Id: Ife911a6ca1531aade374b99ef4502cf77f691fa2
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/389071
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This provides an abstraction layer around TCP
sockets. Previously we just used fd integers, but
we don't want to be tied to integers for alternative
userspace TCP stacks.
Future patches will do more work to enable multiple
implementations of this abstraction. For now, just
get the abstraction in place for POSIX sockets and
make all of the iSCSI changes associated with it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9a825e9e02eb6927c8702d205665c626f57b3771
Reviewed-on: https://review.gerrithub.io/398861
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Doing a manual vhost module fini followed
by an spdk_app_stop is wrong, as the app_stop
will trigger the vhost module fini again.
This will potentially free the g_num_ctrlrs
twice. Doing just spdk_app_stop is enough.
Fixes#238
Fixes: 3fb4bc717b ("vhost: move app fini to the vhost subsystem")
Change-Id: I70f886f6792ffc5c499a8d8cb0b6ab01855f7e9b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399129
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
QEMU overrides this value anyway, but other
virtio implementation may not. Setting
blkcfg->num_queues to its target value
won't break anything, and will help out
SPDK virtio-blk driver implementation.
For equivalent field in virtio-scsi, the
Virtio 1.0 spec says:
```
num_queues
is the total number of request virtqueues exposed by the device. The
driver MAY use only one request queue, or it can use more to achieve
better performance.
```
Multiqueue for virtio-blk is oficially still
unsupported, so the blkcfg->num_queues remains
undocumented. Let's implement it adequately
to the virtio-scsi spec.
Change-Id: Ief520385997bb7e745ed17501a972c55955346d2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399121
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
New vhost user messages GET_CONFIG/SET_CONFIG can be used for
vhost-blk for the purpose to get configuration parameter such
as: Capacity and block size. This commit enable this feature,
users don't need to append capacity any more when started
QEMU. Also event notifier is added for the purpose to change
capacity of block device while QEMU is running.
Also re-enable the vhost-blk tests.
Change-Id: I06ef697984eeea3abbbd655bdcaccaa3b7aa72d7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386546
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No functional change - this just reduces an upcoming
patch that will make further changes to this function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic186f315b09ebadfba6120a70fac03ebb9beaffb
Reviewed-on: https://review.gerrithub.io/398856
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
The socket-related code was already broken out into
lib/net/sock.c, so break out the header portions
from include/spdk/net.h into its own sock.h.
This prepares for some upcoming changes in how
TCP sockets are abstracted, to enable alternative
userspace TCP stack implementations to be used with
SPDK.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I40b162e72ea80c235b49f10b17c2085fcfb385d4
Reviewed-on: https://review.gerrithub.io/398851
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I53ffdd061ba068070f66a752780229ecfe53e737
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Don't allow a duplicate listener to be added to a subsystem.
Change-Id: I1a5f2ae09146a31859921430fb716a36d7f2048e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398652
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The type of a queue is purely a function of its queue ID.
Add a helper function, spdk_nvmf_qpair_is_admin_queue(), to make the
logic more obvious (akin to nvme_qpair_is_admin_queue() in the NVMe
library).
Change-Id: I7cf5a82d1e3dc50834cc2ff03f5f88c5719c6952
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The kernel vhost target enables notifying after processing
each interrupt in a following manner.
* unset NO_NOTIFY flag
* mb()
* check avail ring for slipped requests
And we do the following after issuing each I/O.
* update avail ring
* check NO_NOTIFY
If NO_NOTIFY check is reordered and read first, we might read
old `true` value, and avail ring might be updated after the
kernel has already done its check. This easily leads to deadlock.
Change-Id: I6bb4490775dfed6fb2987e97c39b713054ae26ad
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396499
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These didn't make much sense anyway.
Removed them so there's less code
Change-Id: I3247c640b13e5847b5f6d822072b63cad269ac8c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398467
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Id1e2a7da0db319c4d43988ec4991462fc956dde2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/398542
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tree-wide cleanup of all instances of printf()-style functions where a
format string contains a space before a newline character.
Change-Id: Ib5b5861e97bed9e9d62db03875547e3f771f4769
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397031
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This section was deprecated in the previous release, and its removal
was planned for v18.04.
Users may configure the RPC listen address via the command-line '-r'
parameter.
Change-Id: Ic714417b87d422492b8742852c16983eb61793c2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398239
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds two internal functions for the channel
create and destroy.
Change-Id: I3c5ca7a0633e5a5b3f95a36ed03f2b4cb4792e4f
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/395677
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the different cases to creat a bdev channel, added
a common cleanup function to destroy the resource.
The same function is also called at the bdev channel
destruction.
Change-Id: I81b60cab9df3a8975b0a9982482c9d27899d8a79
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/398351
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This field was only required to check
if we can safely upcast vdev object.
We can just as well check vdev->backend
instead. The vdev->type is not needed here.
Change-Id: I525350957406d4299151e0557b9025ca7bea5371
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396584
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a target is removed, spdk_scsi_dev_destruct
removes its luns, consequently closing bdev descriptors
and in vhost case - triggering target hotremove again.
This doesn't really have any negative consequences, as
the second hotremove just fails silently. But let's
cleanup this for sanity.
Change-Id: I47c76814696b49905b9fb00667e9529db3f58c12
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396575
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Instead of:
* spdk_vhost_scsi_dev_remove(vdev)
* spdk_vhost_blk_dev_remove(vdev)
we now have
* spdk_vhost_dev_remove(vdev)
All the logic is already handled internally. This patch only
changes the API. Also, previous vhost_dev_construct()/remove()
functions have been renamed to vhost_dev_register()/unregister()
because that's what they really do.
Change-Id: I7dd0d77bc5b633bec075e0a71345ddbed62697b4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396574
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
We already have a vhost subsystem and have to do
its fini anyway, so let's remove application fini.
Technically, any SPDK app can use vhost library
and create vhost devices, so we need to delete them
on shutdown in all cases - in module fini.
Change-Id: I013b45b4e73fd19288b9c10bc995dc24894ecf35
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396573
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Checking uniqueness of initiator group is done without mutex and
before register/unregister. This is not thread-safe.
This patch is a preparation to dynamic addition of initiator
information to existing initiator groups.
Change-Id: I44f48c857210522eee70d14bc3735ec73b0c5c6f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/397032
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Orderings of portal group create operation are diferrent between
config file and JSON-RPC. Unification is necessary for correct
concurrency control and the global accept poller like NVMf-tgt.
Hence unify the ordering of operations in this patch.
Common ordering of portal group create operation between configuration
file and JSON-RPC after this patch is the following:
- create a portal group
- create portals
- add the portals to the portal group
- open the portals of the portal group
- add the portal group to the global portal group list
After this patch, the gap between listening socket and accepting socket
will be increased a little when portals groups are creted by config file.
However this will cause no issue because of the TCP backlog and resend
mechanism.
Besides, necessary concurrency control is added and minor refactoring
is done.
About portal group delete operation, orderings of application shutdown
and JSON-RPC are already unified.
Change-Id: I1db7ef4400388127134d7734c68e138a4573b734
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396848
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Checking uniqueness of portal group is done without mutex and
before register/unregister. This is not thread-safe.
Hence this patch is added to ensure PG uniqueness.
A little related refactoring is also done.
Change-Id: Iaa3b5e380f2be5cfdaa2d69f9f2763c98954b0c3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396847
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Network portal must be unique globally but mutex is not added yet.
This patch is added to ensure it.
Change-Id: I3cdd85fd524b0da767d3cd83022e0637f3a32bc9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396846
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
virtio_dev_get_status may result in an MMIO read,
which is quite expensive. Removed it to improve
performance on debug builds.
Change-Id: Ibe2d13ad381f02f8d258d630283c14ce20b7a340
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398468
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This removes PDU flushing from the main connection poller -
all PDU flushing is now done inline when the PDU is completed,
or from the context of the new flush poller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I703cb451d4b548e7f75892e31a7927b511fb4f55
Reviewed-on: https://review.gerrithub.io/395543
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I39152be9653316a24135cde497662cfbc8f68e3a
Reviewed-on: https://review.gerrithub.io/395523
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Previously there was no way to get and verify that ctxt
in bdev was actually an lvol.
This will be used in rpc calls for vbdev_lvol.
Change-Id: I01c50487b740f5bb858dc50e609f023c8b4101ad
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/398178
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I8b570802b05b8e03802d3c2b68a1e7644ea548ac
Reviewed-on: https://review.gerrithub.io/396572
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I277f7288427788e7a107b143331753fd5b23f16f
Reviewed-on: https://review.gerrithub.io/396571
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This change will allow reusing this structure for both internal
and external xattrs as well as in functions having optional xattr,
but missing other options (i.e. snapshot, clone implemented in next patches)
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia6619a75efa0a100168a6f8317be274823af04ab
Reviewed-on: https://review.gerrithub.io/396417
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Icba20351c9ca76397393064b41013c527084853e
Reviewed-on: https://review.gerrithub.io/396385
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a check when adding transport in the poll group.
If already there, just return.
The poll_group_add_transport operation can be called
at the poll group creation and target listen both.
Change-Id: I655d6fa97cafdc11fa23d199bdfe31350b920ca4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/395039
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib3507a9e69b210cbd173c88d166025d4579e0149
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/397602
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For thin provisioned blobs we allocate dma memory
required for copying cluster from backing device.
When cluster size is too big dma allocation may fail
silently (only IO error).
Use PRIu32 to print out the cluster size, and while
here, fix two other places that were using %d to print
cluster size instead of PRIu32.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I098b1a58aee2f0d3f4ead7aa326ecdb63a5b53d8
Reviewed-on: https://review.gerrithub.io/397563
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
After the renaming of json_internal.h to utf.h, it doesn't make sense
for utf.h to include spdk/json.h.
Move the #include "spdk/json.h" to the JSON library implementation
files and remove it from utf.h.
Change-Id: I36092524c9b982fd2e931faf1b7c5d1d6a6c80c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397603
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
The spdk_json_decode_array() function previously tried to check whether
the array would fit into the provided number of output elements
(max_size) before decoding; however, the check was incorrectly comparing
the total number of nested JSON values in the array rather than just the
count of top-level array elements.
Rather than doing the check up front (which can't be done without
modifying the way array lengths are stored in spdk_json_value), just
check if we have reached the end of the 'out' array on each iteration of
the decoding loop.
Fixes GitHub issue #232.
Change-Id: I4d7ce4be022bdf5f726654d0d96277b9d63bd350
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397591
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
New optional argument added to get_lvol_stores RPC.
If lvol store name or uuid is provided, details
for this single lvol store is displayed.
It follows similar logic as in get_bdevs or get_nbd_disks.
Change-Id: I11e71d98f3cde869addf5cedeb4f33e5cebf53ea
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/395126
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I154cea95996b7ad208a9101542afd8c4ea774985
Reviewed-on: https://review.gerrithub.io/397116
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to nest requests inside eachother.
This patch removes those instances in lvol create
error path.
Change-Id: Ieffcbb44957ad2aa1ac59dd41d2aec81c4edeeb3
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/396939
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie6a651d0238d09729e28d5456a84ba090faeb465
Reviewed-on: https://review.gerrithub.io/391568
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3c7d2096f549a88b4a9884c0026d15d3bcd8dc67
Reviewed-on: https://review.gerrithub.io/396387
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibc9609ad36188006e9454e5c799bccd8a92d7991
Reviewed-on: https://review.gerrithub.io/391422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be useful for backing thin provisioned
blobs in the future.
Change-Id: I78cf8cda39e8dff42da69b79ed460797d7494af1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/397043
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds support for live migration for vhost-scsi and vhost-blk
backends.
Change-Id: Ibfc8a713dbba14ba8cb38377a71e28fd340b1487
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/394203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
QEMU always set offset to 0 but for sanity we should take the offset
into account.
Change-Id: I36213cd8fbeb85862b6de59c60bd6bcee7f9d1b2
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/395740
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some messages like SET_FEATURES, SET_VRING_ADDR etc will change internal
state of VQ or device. To prevent race vs thread polling those queues
stop the device.
Change-Id: I15caf9da0decbaa660e9773c93d45ff148e5e9a8
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/395739
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
See comment in vhost.c file for more details why this fix is needed.
Change-Id: I782119768fb200ad36f9253e704cc08a3be36ae6
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/395514
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modified include/spdk/bdev.h and include/spdk_internal/bdev.h
add data members to capture statistics information. Modified
lib/bdev/bdev.c to calculate read/write latency.
Change-Id: Idcd55dd2e88c4b308e016f16ced53720256c79e3
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/390654
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be needed for thin provisioning, since a write
I/O may result in needing to insert a cluster into the
blob and that write I/O may not have been performed
on the metadata thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I84b0cb6e7af87b1f9c6cab4e2c24fa26b12e2c06
Reviewed-on: https://review.gerrithub.io/396737
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia165c3f033658adc86c8993a2a32783921ab1832
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396494
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Virtio 1.0 says that the effective capacity of vrings
is equal to the virtqueue size. When avail ring was full,
we detected it as empty.
Change-Id: I72f5d45cdc14db6b934ce7780e603a3de3131594
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396804
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Ensure the used->idx changes are visible to
the guest at the time of interrupt.
Change-Id: I245b91c7fbe2e21600aa94d8314271ea5b987343
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396929
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This enables some code reuse for future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I296a6c5c0915da4a77a1ab43e8f10a335b7d16d0
Reviewed-on: https://review.gerrithub.io/396736
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will be used in the upcoming thin provisioning
patches. A thread the wishes to insert a newly
allocated cluster into the blob will send a message
to the metadata thread to perform to call this
function, and if it succeeds, sync the blob's
metadata.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I26fcca235ea0d7a187b9fe559851290b6db13649
Reviewed-on: https://review.gerrithub.io/396711
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For now, use this to add some assert() calls to ensure
per-blob metadata operations are only called from the
thread that initialized/loaded the blobstore.
Upcoming patches will utilize this for metadata updates
required due to cluster allocations on thin provisioned
blobs. In that case, the cluster allocations may not
always be done on the metadata thread - but we want
the metadata thread to actually do the metadata sync
operation to guard against races from allocations on
multiple threads in parallel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa0adfe8b7e61ba770449d1e076126ecb9d7a556
Reviewed-on: https://review.gerrithub.io/396712
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add api and unit test functions for
change number of blocks for provided block device.
Change-Id: I55d67c99375cb88bdaa79ce1a36d4298223beddc
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/390802
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes github issue #218.
This patch introduces spdk_cpuset object to store and manipulate
the set of individual CPUs. The main objective of this object is
to replace cpumask declared as uint64_t and extend the limitation
of supported CPUs (lcores) above 64 CPUs.
spdk_cpuset is always allocated dynamically and accessed by opaque
pointer, what makes it easier to extend in the future without
breaking API/ABI.
This patch also extends parsing function allowing to set cpumask
using a list of cpus e.g. "[0-4,10,12]" sets mask of 0,1,2,3,4,10,12
as well as hexadecimal string with and without "0x" prefix.
Change-Id: I475c3ba7fab629021a22e03176e57e400dd24a49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/390794
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also move the test plan file to a more appropiate location.
Change-Id: I462058279d4d2dc03790657b82b3cfeb00c8a93a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/394180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At least on some ARM platforms, virtual address map
uses lower 48 bits of address space, compared to just
47 on x86-64.
This does double the size of the top level map from
1MB to 2MB.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I18f95a10b4913dca0256cbbd8d05f3baa5ab69fa
Reviewed-on: https://review.gerrithub.io/396318
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These two RPCs were missed in the initial COUNTOF conversion.
Change-Id: Ia40eb0cf3b5c859e2b63148e442fd7d52d1032a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396231
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To use JSON dump of iSCSI global parameters as configuration file,
at bootup, it must have completeness.
This patch fixes the following:
- DefaultTime2Wait was not contained.
- MinConnectionsPerCore was not contained.
- Converting only 0 to "None" for dump is not efficient.
Change-Id: I740e6938c216c5c62df6ee70b0ceac40fd0cac00
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396100
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
New added vhost user messages: GET_CONFIG/SET_CONFIG are
used for get/set virtio device's configuration space, this
commit enable the new added vhost messages.
Change-Id: I5c3e3f8fb6ed55e99299323c39658765b1724bb8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386545
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This fixes a false positive warning when building on GCC 7.2.1 with
CONFIG_COVERAGE=y.
bdlen is always initialized on the path where it can be used, but the
compiler seems to get confused when coverage is enabled, so zero out the
value at the top of the function.
Change-Id: Ifc13abff80124cad3d26286ffebf84f967141d13
Reported-by: John Meneghini <johnm@netapp.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396244
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, there is no possibility to save read only blob to disk.
This patch modifies behaviour so that read only flags are applied after syncing blob.
This is analogy to resize, set xattr and remove xattr operations.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Iffed601c78cb83231bb20e7ef05b73847dc3c95a
Reviewed-on: https://review.gerrithub.io/394243
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Idadd4eb7574b005cce8b888b28c8c3b6993343a4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/395555
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_vbdev_unregister() is part of internal bdev API,
yet bdev module that uses spdk_vbdev_register() directly
will not be removed correctly when using delete_bdev RPC.
spdk_vbdev_unregister() is now consolidated with
spdk_bdev_unregister().
This comes up when deleting lvol bdev, as it does not use
spdk_bdev_part_* functions.
base_bdev->vbdevs entry was not removed for bdev that lvs
is created on.
Additionally patch expands test to create lvol bdev,
after removing it using delete_bdev RPC.
With ASAN enabled this would report accessing
already freed memory previously.
Change-Id: I9547e83862e2daa50355d56a1c9f453aaa6cfdb8
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/395711
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Similar functionality is needed when migrating a connection
to its new core after login. So make spdk_iscsi_conn_stop_poller
reusable for that case, and call it in the login migration path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie014a2e50d6ed02165317deab85c943225953197
Reviewed-on: https://review.gerrithub.io/395857
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All calls to this function now use spdk_env_get_current_core()
as lcore, so remove this parameter.
All calls to this function also use _spdk_iscsi_conn_free() as
the stop_fn, so remove that parameter as well - just call that
function directly from the callsites and eliminate the extra
event.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I639e63d26fbfcc054137d9b453be2927e2c1f625
Reviewed-on: https://review.gerrithub.io/395854
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function is now only called from one place, and moving
this inline will simplify some future patches which will
consolidate the login and full-feature pollers.
No functional change.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7d4e6973882c7b579e341283648317e8e06d998a
Reviewed-on: https://review.gerrithub.io/395853
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
vhost I/O only need to be split on 2MB boundaries if
there is a break in the VM's memtable at that 2MB
boundary.
This should drastically reduce (if not eliminate)
the intermittent test pool failures seen recently.
virtio limits number of segments to 128, but this
2MB splitting could introduce additional segment
breaks which we do not allocate IOVs for. In almost
all cases, there are no memtable breaks except at
low 2MB, so most of the extra segment breaks we are
adding are unnecessary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12d85c289ad80c7bb65e3d2030a2405092b19deb
Reviewed-on: https://review.gerrithub.io/396058
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
iovcnt value was set to 0 instead of being assigned from
input argument.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I0f7e89871357f5db9a5a34c801176bc5c7870021
Reviewed-on: https://review.gerrithub.io/395959
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously vdev->name was being allocated/freed
separately in virtio_pci and virtio_user backends.
Now it's all done in generic virtio library and
cleans up some code.
Change-Id: I810e976d09781c0c9b25c6f7fd957a83aad6c7b8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394704
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Caught by the latest scan-build.
Change-Id: I606a30447e5221c86e79accb9a2c1fe76e9eeee0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/396054
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some upcoming changes will effectively render this moot
anyways by adding an epoll/kqueue descriptor to poll
on in all cases (not just connections that have been
idle for 5ms).
The epoll/kqueue code was just ifdef'd out instead
of removed - some of this code will be useful
and reusable with minimal changes in the upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c354390537e6369cb3c32e78a59c300dec6d098
Reviewed-on: https://review.gerrithub.io/395553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This function was originally named spdk_iscsi_write_pdu()
in lib/iscsi/iscsi.c. Since this is an operation on a
connection, add "conn" to the name and move it to conn.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaad022907d43788108d5b2660306abcf5e94040d
Reviewed-on: https://review.gerrithub.io/395522
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will enable some future enhancements where the main
iSCSI connection poller will not try to flush PDUs, we will
just start a separate poller to periodically flush PDUs in that
case.
This is all part of broader scheme to enable epoll() for
iSCSI. Making these changes allows us to avoid using epoll()
to signal when TCP buffer space is available.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6fe9314e386673fcc87bb15580ef808838c55a7b
Reviewed-on: https://review.gerrithub.io/395521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Currently we test up to 512KB I/O sizes, and this I/O
size could fragment to 129 IOVs if split on 4KB
boundaries if the buffer start is not 4KB aligned.
This is likely the cause of a recent slew of failures
in the test pool which coincide with updating to
fio 3.3.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I189157af578e75e025ca8e3420712739e604fca7
Reviewed-on: https://review.gerrithub.io/395872
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows a channel's request_set resources to be
used for queuing I/O requests. This is needed
for upcoming thin provisioning functionality,
where we must queue I/O requests that need to
allocate a cluster, if another cluster allocation
is in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie8d3e799afc0b56bc95ba5ecab11253d8bc8608f
Reviewed-on: https://review.gerrithub.io/395037
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now all operations (both single buffer and iov-based
payloads) which span a cluster boundary get split into
separate blob calls for each cluster.
This will simplify upcoming patches that need to do
special operations if a cluster needs to be allocated.
This code can now be added to just the single cluster
operations and not have to worry about splits. It
will also simplify the code that will eventually queue
requests which require a cluster allocation if an
allocation is already in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22a850e6e23e3b3be31183b28d01d57c163b25b1
Reviewed-on: https://review.gerrithub.io/395035
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
A future patch will queue an operation in
_spdk_blob_request_submit_op_single if the cluster is not allocated
and another allocation is already in progress. If the queueing fails
because of no channel resources, we want to fail the callback and
need to do this before creating the batch.
This causes a bit of code duplication, but in the end should make the
code easier to read.
While here, pass spdk_blob instead of spdk_blob_data to
_spdk_blob_request_submit_op_single. This simplifies a future patch
which will need the spdk_blob when queueing an operation. It also
incidentally makes it consistent with _spdk_blob_request_submit_op_split.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib0ec0e5138eac5bf208fcde6676cd2a77a1a663f
Reviewed-on: https://review.gerrithub.io/395196
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make it non vhost-user specific. The same
code will be later reused by upcoming
construct_virtio_pci_bdev RPC call.
Change-Id: I6964fedea2a1d52c9b06d5fd8cafe745e06df0ab
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394504
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The default name remains as sprintf("VirtioScsi%d", counter++).
Change-Id: I244c1389f8dfac16f61aaf1d610a7888dd55e56c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394446
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is just the API introduction. See subsequent
patches for its RPC usage.
Change-Id: Iadb7c9bf6a56ab4330c9f2215c6006a2935d208d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently setting cpumask to portal is possible only through
iSCSI.conf. This patch makes possible for any user to set cpumask
through JSON-RPC too.
The following are done in this patch:
- To keep compatibility, cpumask parameter handled as optional.
- Python test code is added.
- Current python script for JSON-RPC does not work correctly for
IPv6 and the issue is fixed.
Change-Id: I42ef397ce95040a36db4430417a35e9e97527477
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391728
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This concept was added very early in the SPDK iSCSI target
development process when there was a high focus on maximizing
throughput on a single iSCSI connection with 512-byte reads.
Realistically, in multi-connection environments focused on
predominantly 4KB (or more) workloads, this concept loses its
effectiveness - it is relatively rare that PDUs from multiple
I/O would coalesce within the default 8us flush timeout period.
There were no users of flush timeout in the SPDK tree - it was
not even documented in the iSCSI configuration file example and
there was no way to modify it at run time. So leave the change
out of the CHANGELOG.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08c3e959fb3945dc2c9cb89248305d0c88aa778f
Reviewed-on: https://review.gerrithub.io/395520
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently cpumask cannot be specified for each portal when it is
created by JSON-RPC and portal group creation is not unified
between iSCSI.conf and JSON-RPC.
This patch does the following:
- cpumask string is decoded in spdk_iscsi_portal_create() which
is common between iSCSI.conf and JSON-RPC.
- parsing configline of portal is difficult to understand and
hence it is refactored.
- UT code is added.
JSON-RPC will be added by the next patch.
Change-Id: I13b9989263fae5facff260de32a55ec99f5d5a06
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392447
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For I/O that do not span a cluster boundary, just issue
a single batch command to underlying block device.
For I/O that do span a cluster boundary, issue a batch
command for each against the blob (not the block device)
for each cluster accessed by the I/O.
This is all in preparation for upcoming patches which
enable thin provisioning and hence cluster allocation
in the I/O path. It will simplify implementation of
the cluster allocation path since now that code only
needs to be concerned with a single allocation at once.
Splitting for readv/writev will be handled in a
later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia2341abbda599dace3357c4eec06ab6602ef81a8
Reviewed-on: https://review.gerrithub.io/395027
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This breaks out the logic for building a batch for
non-iov operations to a separate function. Future
patches will do further modifications on this
new function - separating it out into two separate
functions, one for operations that span a cluster boundary
and one for those that do not.
No functional change here - this is just moving code
around to reduce size of upcoming patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id1e67e6305d7ba2317700e1477e12c749ebf664c
Reviewed-on: https://review.gerrithub.io/395026
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These will be used to implement user request splitting
on cluster boundaries.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I29e00ae9555fdd8a149e92be3cf88a2e528f5c0e
Reviewed-on: https://review.gerrithub.io/395021
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This clarifies that the read/write/etc. operation is
being performaned on the block device. This
clarification will be important in some upcoming
patches which will batch similar operations on a
blob (as part of splitting a user request into smaller
operations if it spans a cluster boundary).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic574804c15f769ee80c1b6f68ca3b77ec910f0f6
Reviewed-on: https://review.gerrithub.io/395017
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These were unused in blobstore so remove them for now.
This reduces number of code changes in some upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02e04f7d84fff1d2a70f371d222425f373a5d4ff
Reviewed-on: https://review.gerrithub.io/395016
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There existing some cases like in our UT code, the
start_poller_fn and stop_poller_fn is not configured.
Add a check here and properly handle these cases.
Change-Id: Iaac83d78547432584f6de0c54e9d2e06b9b35741
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/392996
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When there are two bdevs built on the same io_device,
it is possible that one bdev entirely saturates
underlying queue, not letting the second bdev issue
a single I/O. The second bdev will silently fail any
subsequent I/O and append it to the nomem_io list.
However, since we resend I/O only from I/O completion
callback and there's no outstanding I/O for that bdev
(io_outstanding==0), the I/O will never be resent.
It'll be stuck in nomem_io forever.
This patch makes nomem_io list to be shared between
bdevs built on the same device. It is now possible
that I/O completion callback from one bdev will retry
sending I/O from other bdev.
The shared bdev data is based on thread-local
bdev_mgmt_channel, so doesn't need any external
synchronization.
Change-Id: Ia5ac3a1627ce3de4087e43907c329aa7d07ed7c7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394658
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
We would still like to keep up this Macro, then if users
want to change this value with their own ones,
they can change it.
Change-Id: Ic13c9ba0889955cc41a75f700c58822728782f6c
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/394311
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Individual threads can now pause and resume subsystems
as needed, so the master_thread isn't used.
Change-Id: I49ccb1f87d3e5956db7bd8fc9da0542c5c487923
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394260
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the general purpose mechanism to pause a subsystem when a bdev
is hot removed.
Change-Id: I3cd4fb15140d6682707b7840c6a9c3f63fe48e55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394259
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
When the state change is known to fail immediately, use
a return code instead of calling the callback.
Most of the callbacks didn't actually check for errors,
so this patch also doesn't check for errors on return
codes. That should be done in the future.
Change-Id: I67e03f93d7f53892473dfc073f4150e7e620cad2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394281
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Eventually this should probably queue, but for now
just fail these commands.
Change-Id: Ie1b1088aa38198c17062ac9874539ad6d99b01eb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394125
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These commands can now pause a subsystem if they need to operate
on it. We don't currently implement any of the NVMe commands
that would need to pause, so this patch is simpler than most
would expect.
Change-Id: I25bfdf8e7577cda2bb0ce248d2889447032b9b4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394121
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch makes possible to set and get Header Digest and Data
Digest of target.
Change-Id: I1d1b892f9dfb747c0f5ad8fc4fddef40929b4143
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/394482
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When a target is created by iSCSI.conf, only valid CHAP params
are passed to spdk_iscsi_tgt_node_construct().
When a target is created by JSON-RPC, help information encourages
users to specify valid CHAP params but
spdk_iscsi_tgt_node_construct() does not check CHAP params and
users can create targets whose CHAP params are invalid.
Change-Id: I7e9057a982f21f04782481cda74208a139c1fdad
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/394481
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add JSON-RPC to add an LUN to an existing target. The parameter
lun_id is optinal and if skipped, the lowest free LUN ID will be
assigned.
This JSON-RPC is tested in iscsi_tgt/rpc_config.
Change-Id: I010619f2d4ccec89c589bb0618466b4d15949ebb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385181
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Removing an LUN from an existing iSCSI target is possible by
removing the corresponding BDEV. However adding an LUN to an
existing iSCSI target is not possible yet.
Add a new function spdk_iscsi_tgt_node_add_lun() and related
functions first toward supporting this function.
JSON-RPC for this operation will be submitted an another patch.
Informing the newly added LUN to the initiator is not included
in this patch. Hence this operation is possible only for any
inactive target.
Change-Id: I3a28f4d75a17126e49c9d12ce64c3ad68f231840
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prepares for some future blobstore.c code that will use these
bs_dev functions directly making possible to read from different device
than the one in the current context.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I55b15544ea4b53475c4b72ee5c92ff1c0a2b8c88
Reviewed-on: https://review.gerrithub.io/393781
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I35779dc547e0c084086ec6d9bf44f86850cb7f05
Reviewed-on: https://review.gerrithub.io/393780
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iadb29a8ce8dcebfea68d4feeb5f3de1bb3124f16
Reviewed-on: https://review.gerrithub.io/392286
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib3470fbac49e92308ed14e20ccde6655354f2580
Reviewed-on: https://review.gerrithub.io/389577
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev hotremove event is send directly to hotremove callback given
during spdk_scsi_dev_construct() call. So any bdev hotremove might be
promoted to whole SCSI device removal (like in vhost) wich will trigger
LUN removal. But after returning from hotremove callback LUN and device
might be still referenced (eg to register poller or by outstanding IO).
Even worse: spdk_scsi_dev object is not dynamicaly allocated but
returned from static array which mean there is no way to detect
use-after-free error on spdk_scsi_dev by any tool. This might lead to
using SCSI device that is freed or assigned to different device.
To fix this:
- always delete LUN using hotremove path
- defer spdk_scsi_dev delete/removal after all LUNS are really
deleted.
Change-Id: I65598bf42cd507f620095dff5d32509a0424d060
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393674
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In current bdev_virtio_scsi PCI enumerate callback
implementation we rely on a global variable - a global
list of virtio devices. We do not need any opaque
context data inside this callback just yet. It will
be required to add virtio devices in runtime. See the
next patch for details.
Change-Id: I116cbd3bd633f56922eedcc7c07b8c0310e51d49
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394444
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
`rpc.py remove_virtio_scsi_bdev <name>`
The RPC will remove entire Virtio SCSI device together
with all underlying bdevs.
Change-Id: I87f349b0e7543955d54a34406cf73c4a91d1495f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394170
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Consider the following scenario:
* user deletes a Virtio-SCSI bdev (spdk_bdev_unregister)
* user deletes entire Virtio-SCSI controller (virtio_scsi_dev_remove)
If there were any descriptors open with asynchronous
remove callback specified, the first bdev unregister
won't delete the bdev and won't notify the Virtio-SCSI
controller in any way. Subsequent Virtio-SCSI controller
deletion might result in unregistering the same bdev
again. This patch makes Virtio-SCSI controller open a
dummy descriptor on each of its bdevs, so that it's
notified of any started bdev_unregister
Change-Id: I9a8c841d08393ef1940c4cebc9dfcb58e9b0ac4a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394169
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previous nbd implementation only processes one I/O at a time.
This patch increases spdk_nbd_disk io queue-depth.
lists are added to accommodate and coordinate overplapped nbd_io.
Change-Id: I3bda2c957a561b884ebfe9550b7cb6f3c991aef8
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/392609
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Apply a state for nbd io instead of using flag
bits like payload_in_progress and resp_in_progress.
Change-Id: I331567f7c4d7a6a886a145390a8b1e4db0f6040c
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/392175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This avoids having to dereference the spdk_bdev_io's
channel in the spdk_bdev_free_io() path.
Cleaning up after hotplug events should ensure that
all associated bdev_ios have been freed (not just
completed) before the bdev channels have been freed,
but this patch gives us some more wiggle room in this
area.
Results in a small (1-2%) performance degradation on
a bdevperf microbenchmark, but should result in no
noticeable difference on any real world workload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8b88300fc53e8c0b83309a738a4c3bd2aeaff52
Reviewed-on: https://review.gerrithub.io/394399
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
There is no need to keep a lun name anymore - we always
use the bdev name as the lun name so it is not providing any
additional value. This also keeps us from associating
the same bdev with different LUNs on different iSCSI target
nodes or vhost-scsi controllers.
Side effect of this change is:
1) Use "bdev_name" across the APIs to make it more clear
what these names refer to.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3d42fde22087352ce1d5dc80178bd8c5cac8cb7c
Reviewed-on: https://review.gerrithub.io/390843
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the file have cache data and not flushed, the file length will be
not correct.
Change-Id: Idde23e158c1d010e67579b5d6a8d87d3cfbfed2d
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/393784
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch provides logic for returning errors instead of
assert when size is larger than blobstore size.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I16d12338e2b682c39bd33d507d57ea126501a0d7
Reviewed-on: https://review.gerrithub.io/392749
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
when test hotplug case with large write command which need r2t, after the
device hot removed, the outstanding r2t commands are waitting for data out PDU,
and the primary commands probably already return with error, then the lun
could be deleted, later the related data out PDU will received and try to send
other r2t, this patch make sure the r2t command sent smoothly even the device
hot removed.
Change-Id: I49061d1258e65cb0964526f755d870ebe7095920
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/394321
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recovery code did not claim clusters taken by metadata.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If6726eddd22f4e1a3f9814b2348243155fb0fdb9
Reviewed-on: https://review.gerrithub.io/394173
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This `len` field describes the amount of bytes
*written* by the device. It is used to prevent
the driver from reading buffer memory that wasn't
really written to - it could contain either
leftover values from previous requests or even
be completely unitialized.
In a couple of invalid-request error conditions
we still write the VIRTIO_BLK_S_UNSUPP response while
returning used_len == 0, but that's fine. A properly
written driver will likely handle both of these cases
the same way.
Change-Id: I8e9f3a8051561096e2ee755122d534b4ffd94db1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393963
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This `len` field describes the amount of bytes
*written* by the device. It is used to prevent
the driver from reading buffer memory that wasn't
really written to - it could contain either
leftover values from previous requests or even
be completely unitialized.
Change-Id: I67aee5c8b9455fc86cdeb600ea3a051a7737c66f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393962
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removed task `pending` queue. All tasks were
temporarily put in this queue just to be moved
out of it yet within the same reactor cycle.
Change-Id: I32d402f7abd3cfa21c263f41149425abdc71992f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393911
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The thread variable defined in the struct spdk_nvmf_rdma_qpair is
not used. Just remove it.
Change-Id: I5f406ff276733cc9474a997b3c18d23c7420cac8
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/394152
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
