This patch is to introduce the specific QoS related structure
and the enumeration for types of QoS rate limits. Later new
types of QoS rate limits can be supported easily.
Change-Id: Idb8d2e7627fd145bf2b0ddb296c968b6b068f48c
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/424459
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For those with fat fingers or really bad vision... previously bdevperf
would take a bogus size and try to make it work, if you used the verify
feature this could (or would in my case) result in a data miscompare.
Change-Id: Id5d4c4130c3d3c0606d6a243d2ca278e539684e9
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/425883
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Initial support for softare AESNI_MB DPDK driver only.
Have tested (both aesni and QAT seprately and concurrrently) on underlying NVMe devices
with bdevio and a bdevperf script that runs IOs from 512B to 128K each with Q depths from
1 to 512 in powers of 2 for 30 seconds each run.
QAT can be included in the code (but not makefile) and marked as experimental
until we are ready to test in CI. It works well on 2 systems but is a big PITA to get
the hardware setup and configured for use with DPDK (IMHO).
Change-Id: If518c3df8e74e00efa18afdf194824c5e69778fc
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/403107
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This it to prepare for RPM package. Also lower number of dependencies
needed by SPDK tools.
Update changelog to deprecate Python 2 and explicit interpeter invoking
in scripts.
Change-Id: I2497cca721cbcbadc1c99c675f8b8b7f682d5efa
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The bdevio tests will now work on RAID volumes, so enable
RAID testing there too.
It is probably safe now to just build RAID by default, and
not require --with-raid - but let's do some more testing
with vhost and NVMe-oF against it first before we do so.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15697f035cb688574a7ecb8be24d0c84fc622d83
Reviewed-on: https://review.gerrithub.io/423408
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The previous patch fixed the underlying issue.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic5ccaf82aba4d2ed8644b34bd4d0294784fd1de2
Reviewed-on: https://review.gerrithub.io/424734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Config file pathnames have been possible on the command line
for a very long time, and all of the SPDK testing infrastructure
uses it. The default pathnames were added a very long time ago,
and now can cause weird issues like conflicting with --wait-for-rpc
when an INI config file is not passed on the command line but is
pulled in by the default pathname instead.
So remove the default pathnames.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia914ff1c9321235f79f8cc9a054ed7f099340151
Reviewed-on: https://review.gerrithub.io/424606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is causing a fair number of failures in both the
Chandler and Jenkins test pools. This was added fairly
recently, so comment it out for now while it is debugged
further.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5d227252e27265c2b25ad7e76dd54d6c0501b8c4
Reviewed-on: https://review.gerrithub.io/424132
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since IOAT is disabled by default, that option can be removed from
any config file used in tests.
Change-Id: I681bd1eb6a8c81328ba580be75b418994ccd85e3
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/423357
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I4b2fa51608ad8504b1db6d039efa59f8659e5025
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/421695
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
'-s' option (io size) had to be changed to '-o' as it conflicts
with mem-size.
Change-Id: I7486f30ce7d836a6e465e07f723877facb4f8536
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421736
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes us exit immediately on '-h' or any parsing error.
Change-Id: I6bd2fc9238bcecba6df1e62a8db42ce79ad73524
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The config now has to be provided with '-c' or '--config' param.
Change-Id: I999c84d899b1e15cd4f34120016f6a18fc0e84c9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In order to allow specifying a custom cpumask
we have to prepare the environment a bit.
Change-Id: I45d2c960c05c7583cc2781c985760813ef1f2b77
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Daisuke Aoyama originally contributed to istgt, the
iSCSI target in FreeBSD. The SPDK iSCSI code is
originally derived from that. Due to copy and paste,
some incorrect copyright attributions have been added
to other files that do not derive from istgt, so
this patch removes those.
It is doubtful, at this point, that there is any code
whatsoever that remains from the original istgt, but
we can revisit that at a later time.
Change-Id: I207e1e6b99d271e2f12690be90a96f7d0c113af7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
RAID is experimental for 18.07, pending iov support
which is needed for vhost. But we need to at least
build RAID in our tests, and run some basic
bdev tests to ensure it doesn't quickly become stale.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68bb45df6d00e31dc96ed8bc902b61a5ef699ba2
Reviewed-on: https://review.gerrithub.io/420678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Followup to earlier fix, didn't see this until after fixing bdev
the rest of the way...
Change-Id: Idc663ffe6a90e6cb3511e4e703f2e9c667a3eac4
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/419445
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Root cause: we did not check the status of the bdev_io
in bdevperf_verify_write_complete function.
So the fix is that: if the status is failed, we should
not do the read check again, but just complete this I/O.
Change-Id: I3dc796abe47c3f2e7eeb2b6eb0ebc0338122479d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/419338
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In the event that something went wrong earluer, we shouldn't
try and touch memory that was never allocated.
This is at least a partial fix for issue 363.
Change-Id: I5174c845fb89f6d386877758fdc99178704ff73c
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/419039
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for passthru bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8ea20b3003dd6539d84123c3b5363bd8bdfd6f7f
Reviewed-on: https://review.gerrithub.io/416535
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- load spdk_tgt with bdevs
- check if json config is properly saved and loaded
- check if all bdevs are properly loaded
- check if configuration of spdk_tgt is properly set
Change-Id: I89226bc9c05880e73523fb189116e7433a513244
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/406326
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be necessary when the NVMe/TCP transport is added, which will
use the sock abstraction library.
Change-Id: I6561ccdad1ff575db2afa418eab2f2cd24806cb9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416477
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: Help for the debug.
To use the spdk_app_parse_args may be the next patch
(I just checked the spdk_app_parse_args, there are many
conflict args).
Change-Id: I6e601ba62cfdb4d381520b4eab0f6f85ed862bb9
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/415107
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function is intended to be used when an spdk_bdev
I/O operation (such as spdk_bdev_write or spdk_bdev_write_blocks)
fails due to spdk_bdev_io buffer exhaustion. The caller
can queue an spdk_bdev_io_wait structure on the calling thread
which will be invoked when an spdk_bdev_io buffer is available.
While here, turn off error messages in bdev.c related to
spdk_bdev_io pool exhaustion, since we now have an API designed
to gracefully recover from it.
Also modify bdevperf as an example of how to use this new API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia55f6582dc5a8d6d8bcc74689fd846d742324510
Reviewed-on: https://review.gerrithub.io/415074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be needed when we need to re-attempt an IO submission
when the bdev_io pool is exhausted.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0500ee1b7881c1be7ba8a72a930190d85e7a0f77
Reviewed-on: https://review.gerrithub.io/415301
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prepares for upcoming patches which handle -ENOMEM
from the SPDK bdev io submit function. When we retry
submitting the I/O, we do not want to "re-prepare" the
I/O - i.e. we don't want to calculate a new offset or
memset the buffer again for verify workloads.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0265651cb1fad372bf3e801c262dc159058a2a1d
Reviewed-on: https://review.gerrithub.io/415300
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia32bd2655a4cc1c082ce5fd5420f6abaabe40133
Reviewed-on: https://review.gerrithub.io/415299
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Several apps link against $(COPY_MODULES_LINKER_ARGS) without adding
$(COPY_MODULES_FILES) to the dependency list. This means that those
apps would not get rebuilt if the copy modules were modified without a
'make clean'.
The blobfs example apps were also missing other dependencies; add those
while we're here.
Change-Id: Iac6606b650d32bf21f7f31bd2727f9e92c0da748
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414888
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch changes the default setting of IOAT copy engine from
Enabled to Disabled. Accordingly this patch changes the config file
specification for IOAT copy engine from "Disable Yes/No" to
"Enable No/Yes".
Subsequent patches will add a new JSON RPC to configure IOAT
copy engine dynamically.
Change-Id: I754990cbb6ecc096953dd2fb9d34366b91111bf8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410757
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6babd4cf990bf19b510db88bdfb0ca81e29d9252
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414700
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes more sense as a first class library.
Change-Id: Ibd5c578f8708bd8c7d83fe1629e97c9a3316b56b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414698
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
A couple of files were accidentally marked as executable.
Change-Id: I89ff0bc037fba1b5d073ceea55c78fb5d9cb19b2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
While here, don't print out empty performance data if the
test run failed (for example, if no bdevs were found). Also
remove superfluous "done" message at the end of main - it
really serves no purpose and looks silly especially if the
test failed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I19c678bee9079f6aa453a4b925819a5ea27f6534
Reviewed-on: https://review.gerrithub.io/414064
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is an existing unmap "workload" but it is not a
real workload - it's just used as a type of verify
function to check if an unmapped region later returns
zeroes. This has typically been true for Intel NVMe SSDs
but is not universal, so this functionality is not really
useful. It's not used anywhere in any of the tests in the
SPDK tree either.
So replace it with a real "unmap" workload that will
do sequential unmap operations on the underlying
bdev. A future enhancement could make these unmap
operations random across the bdev - but that can be
added later.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99d7c2d455fb5c3c87712a5bbfd890d257630f88
Reviewed-on: https://review.gerrithub.io/413151
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This commit adds a simple hello world example that writes the string
"Hello World!" to a bdev. The example can be used on a block device
such as Malloc or virtual bdev such as the passthru vbdev. The
sample bdev.conf configuration file includes a configuration for 2
malloc bdevs and one passthru bdev on top of Malloc0.
Change-Id: I1414183e3ddfac988ef61f24b8271653ac57e7c1
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.gerrithub.io/407220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ceph monitor IP address was always 127.0.0.1, with this change
it can be configured at setup time.
Since each test might prefer to specify different addresses
or ones that do not exist at start of autotest.sh. rbd_setup was
moved to begining of each test respectively.
Change-Id: I5626f7ea979d0db921208355ba23314cf48e971f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/407910
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I28fa033378649f9cf02bf216698b9d2058f77c9d
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/406883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For application like vhost/iSCSI target/NVMe-oF target/etc,
a new section as below can be added for the QoS rate limiting.
[QoS]
Limit_IOPS Malloc0 100000
Limit_IOPS Nvme0n1 500000
Also added a sample change at test/lib/bdev/bdev.conf.in
Change-Id: I7c7d951fbe1352ca2571f135c657bc4fa43b56c7
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393221
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The long-term plan is to use the JSON-based configuration format, but
for now, we need a config file section to be able to test a bdev module
in blockdev.sh.
Change-Id: I2a69f7172693ed6d4939a3b938747e2a1c62ff83
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405908
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
