No longer send an event to process the pending queue -
just do it inline.
Change-Id: I32716c9ecac3791de297c2a48529c15d220dbe6c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
recover was only called by drained, and they're relatively small
Change-Id: I65002cfe13d0045a37609be5b85be087402b4a65
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421043
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
There is no need to keep attempting to abort all requests later on,
there won't be any in these other states.
Change-Id: I7b12e10b87e0d0bb4a74fdf67fb278b443e70e8a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
The state of the RDMA qpair is not entirely initialized (RTS)
until after the CM event is accepted. Delay caching the state
until then.
Change-Id: I39befb867fc6a01e94d7fc176071aaabb906bd07
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
IBV_EVENT_SQ_DRAINED can occur during both error recovery and
normal operation. We don't want to spend time sending a message
to the correct qpair thread and then attempting to abort
all I/O in the case where this wasn't triggered by an error.
The case where this occurs during an error is very rare and
only in response to a user forcing the state to err from the
sqd state. For now, don't handle that case at all. Handle that
corner case in a later patch.
Change-Id: I16462ca52739b68f6b52a963f7344e12f7f48a55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This was the only call point of two very small static functions,
so merge them into the main body.
Change-Id: Ifdd3355ffd500ac5ad4fcf69feace65b35132906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420935
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The update call was never used independently of the get
call, so combine them
Change-Id: Ibae622e5fd23203e79ceeae1aeccc5c7d9d1ebc0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420934
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
It is necessary to free the AER without sending a completion to ensure
that the host does not attempt to send an additional AER upon receiving
the first completion.
Change-Id: I2b3f8f286d6396019d8ace97d2376547705b8d9d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At times, it may be necessary to free requests without completing them.
For example, when freeing a qpair, one needs to free the AER sent from
the host before deleting the qpair. It is important not to send a
completion for the AER because:
1. According to the spec, this will trigger the host to send another AER
2. No Asynchronous Events have occured, so we should not complete the
AER.
Change-Id: I92e163f0fed0ee2bc942569a647cb3c1967edec9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419732
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RDMA QP is attempted to recover after IBV_EVENT_QP_FATAL event
is received from IBV asynchronous event API.
RDMA QP is put into ERROR state and is not processing any inbound
requests. The outstanding requests are only allowed to COMPLETED
and FREE states, no outbound transfers are performed.
IBV_EVENT_QP_LAST_WQE_REACHED or IBV_EVENT_SQ_DRAINED event is
expected to follow IBV_EVENT_QP_FATAL, giving a go to draining of
all outstanding requests and freeing the associated resources.
The requests executed by block layer are gracefully allowed to
complete, but no outbound transfers are made.
Note, outstanding requests can not be reliably completed through
polling the CQ, as WC's with failure status might not have all
the fields valid. The failed WC's are dropped and the outstanding
requests are fetched from the appropriate state's linked list.
QP recovery is triggered when there is no more outstanding requests.
If QP recovery is completed succesfully, the RDMA QP is put back into
ACTIVE state, the QP disconnect is triggered otherwise.
Change-Id: I45ee7feea067f80ccc6402518990014d691fbda3
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/416879
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Requests that are being put into IBV context are lost when
IBV QP breaks and its SQ drains.
In order to track NVMf/RDMA requests, RDMA QP has been
reworked to track requests at any state with queues of
requests for each state.
This allowed to get rid of a few intermediate queues and
request counters.
A couple of states has been added to track outbound requests
with and without data. They will be used by QP recovery for
freeing resources assigned to outstanding requests.
Change-Id: Ie84207325c38e5bb2c247cd6dcddb82dfad0d503
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/416878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most of the error paths in this function leaked resources. Make them
all use spdk_nvmf_rdma_destroy() so all resources are consistently
freed.
The spdk_io_device_register() call is moved to the top of the function
so that the io_device is always valid when calling the destroy function.
Change-Id: Ic92f09f157ee8245fb962d8bc3330aadd87b294a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418869
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
rdma_get_devices() may return NULL on failure; we need to check for this
before dereferencing the returned pointer.
Fixes GitHub issue #360.
Change-Id: I9628e5865365d256f4b1887bf07ce8737b55d356
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418868
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Change-Id: I59f4f69ed695cc9a2b6d0b87052fdf50004ee1c7
Signed-off-by: Senthil Kumar V <senthil.kumar.veluswamy@wdc.com>
Reviewed-on: https://review.gerrithub.io/418170
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I54793624e46a4e51b0c989ddfe933ccb5f035123
Signed-off-by: shahar salzman <shahar.salzman@kaminario.com>
Reviewed-on: https://review.gerrithub.io/417858
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
qpair_disconnect has previously presented an entirely synchronous API.
However, it relies on other asynchronous operations to complete its
task. By giving it an asynchronous API, we can avoid possible race
conditions. Patch 1 of several.
Change-Id: If9e26ee70ae5d6c0273750226b4408a8e4587e19
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/417345
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I2eb84490144c2e1f772c4094645e5067149d2862
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415316
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c6c410d120bec830ec17105de43ca62bf202b7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Remove the old trace points since they didn't actually
work. More trace points should be added in the future.
Change-Id: I1b658af8e309137882c31460723d7bb94d555b79
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414280
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6babd4cf990bf19b510db88bdfb0ca81e29d9252
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414700
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMf cnx acceptor poller is changed to check the asynchronous events
from the RDMA devices.
RDMA async events are polled together with RDMA CM events; the file
descriptors are combined into a poll fd array and processed in a single
poll syscall.
The errors handler is an empty placeholder for this patch, it just
prints the kind of event read from the IB device context.
The work for implementing event handling is left for later.
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Change-Id: Ib167990651b585090aceef1404a88d431a910226
Reviewed-on: https://review.gerrithub.io/412540
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This path works for disconnect events on qpairs at run time.
Disconnects in response to killing the target have
not been worked out yet.
This path does not currently wait for outstanding I/O to
complete.
Change-Id: I8e476c8444b460c18e51601fb950b9132d12f67d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412076
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure every event has a handler. No new code
to actually handle events yet.
Change-Id: I4d63898e9bd7fcaa7dc3486c07f42d75b4d48da0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Transport Data Block descriptors aren't actually used by the
RDMA transport, but this function will likely be used by
other transports in the future.
Change-Id: Ic2b6a1f3a86e350c7b7258d75964a38338bdd3b5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409940
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I595f0ec871174557a35811fe3b102c33a5a60ab0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405931
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ia165c3f033658adc86c8993a2a32783921ab1832
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396494
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The thread variable defined in the struct spdk_nvmf_rdma_qpair is
not used. Just remove it.
Change-Id: I5f406ff276733cc9474a997b3c18d23c7420cac8
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/394152
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: If the qp creates in a failure state,
we should set cm_id = NULL, then we do not need to
destroy the qp which is not created.
Also this patch add return value check while calling
spdk_nvmf_rdma_qpair_initialize.
Change-Id: I084c186738fcf6079cb36666f68e10b906e77145
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/394016
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch remove need for additional buffer when translating error code
to string.
Change-Id: Iaa60088b5c450581d3cdddbb425119b17d55a44b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386114
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The outstanding r/w requests counter is not decremented
back if IB r/w request fails.
As the result, the rdma qpair stops pumping the requests
after the number of ibv_post_send failures reaches
the threshold for outstanding r/w requests for that qpair.
The patch decrements qpair's r/w counter back in case of
ibv_post_send returns an error.
Change-Id: I8fa0f2905974a50037034962e4d2a001290a06a9
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/391799
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This greatly increases the efficiency when the target is scaled
to many connections. Now all connections being handled by a given
thread can be polled in O(1), whereas before it was O(n) where
n was the number of connections.
Change-Id: I9f695f68093d73e6538df416b0f1aabef07119ff
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/391491
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now rely entirely on the user to create and poll
the poll groups.
Change-Id: I66baaa2d0f493390a055a32e6c902f5e2f574534
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/385954
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I8b77f8aa8e20a277d0a5e53688d7cef8674d6244
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390497
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move some of the code out of the function and rename it
to spdk_nvmf_rdma_qpair_initialize. In the future, the
operations left in initialize will end up being
deferred until the qpair is assigned to a poll group.
However, for this patch there is no functional change.
Change-Id: I0f64489ffbf1f8957358d3b1781acc430b77717c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389650
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some places used the convention 'rqpair' and others
'rdma_qpair'. For consistency, name them all 'rqpair'.
Change-Id: I131833d14efdfdbcbb99bea5d64cbcf99d9ec90b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389649
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There is a 1:1 correspondence between the two, but it is much
more useful to have a pointer to the poll group.
Change-Id: I8494b0573a9b2cce5819545548d0c65a18bdbe86
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389640
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Currently SPDK NVMeoF will allocate data buffer from mempool, however,
some data buffers may not block size aligned, this is okay for NVMe
backend but will fail for AIO backend. 4KiB aligned data buffers
should be okay for most AIO backends.
Change-Id: If7b9c2962d716addbd755e80e59620377f2ba488
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/389245
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are two ways to set stockets to nonblocking type:
- ioctl with FIONBIO
- fcntl with O_NONBLOCK
Those two should be equivalent for sockets used in SPDK.
During testing it was shown that VPP interprets only
the second type, so this patch changes all occurences of it.
When here, more descriptive error logs were set in case of
failure.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifa5b30e3a4fa04fe23f41fa2ae9dab4b01dd7d3c
Reviewed-on: https://review.gerrithub.io/388816
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We probably do not allocate the mgmt_channel when we destroy the
rdma queue pair, add the judgment before put the io channnel.
Change-Id: I528c9686907c04c5025ff9d3872f24f2996e9d33
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/388159
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
According to the current code, rdma qpair is always created
by the thread on acceptor_core, thus we need to
change the related I/O channel during polling if the core
configured for subsystem is not same with the acceptor core.\
With this patch, we can run NVMe-oF tgt with multiple cores,
and each subsystem can configure different core to handle.
Change-Id: I6163a871f65115e545a4f3fd9cc46b3bafb13249
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/383683
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibdfa8be770d7bfcb2baaf29fa5b32dea064ffbd0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/383383
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I65e84971f2d55f27b0c0c1a1b226fc4da4b3cf89
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382763
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Our previous implementation makes the buffer allocation
in an unfair way and this patch can solve this issue.
With this patch, we can use limited buffer to support
high I/O depth.
Change-Id: I0e7a073c0b4539090218aa461d50620287bb4b63
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the normal case, we can avoid re-adding it into
pending data buf list if there is no buffer.
Change-Id: I400e3c6c60bb1d1df13782faf2dd32ca2bd897a3
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382402
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
