Purpose: Make the code clean and remove duplicated code.
Change-Id: I6cc8b94af24f89301531bd38d766afb53898e0ed
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6811
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
The next patch will add nvme_bdev_channel and we will not be able to
io_channel from nvme_ch anymore.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8ba93e66657d21da58df63f3ad6dde4b155fc174
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6612
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add mutex per nvme_bdev_ctrlr and replace g_bdev_nvme_mutex by it
for possible cases. These are just drop-in-replacement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib1d5eebd65e514cfe96ad60a9004d9bace7b4f6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6693
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make us easier to maintain the operation to delete
nvme_bdev_ctrlr and its trids. The added unit test cases guard us
from degradation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I400d4092020e89bacaebc7be045a456b8760ed8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6688
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
By adding the second parameter, hotplug, factor out the common part
of remove_cb() and bdev_nvme_delete() into a helper function
_bdev_nvme_delete().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5becbc7a7a94e852510e6a2745afb9c533d21713
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6692
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_bdev_part_base_construct() is deprecated so this patch
moves remaining instances to spdk_bdev_part_base_construct_ext().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iccd4b15933bec41885adfaf4fc4ce2abedd2d6c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6627
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Leverage SO_INCOMING_CPU to get the CPU affinity of connections
(sockets). And allocate the connections to specific poll groups,
which aims to utilize cache locality.
From our test:
6 P4600 NVMe on target,target uses 8 cores, NIC irqs are bound to
these 8 cores, and initiator side uses 24 and 32 cores,
we can get 11%~17% randwrite performance boost for posix, and 8%~12%
for uring.
Change-Id: I011e0a21502c85adcccd4a14fbe9838b43f54976
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5748
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
nvme_bdev_ctrlr is valid while populating namespaces of the
nvme_bdev_ctrlr regardless of the result. nvme_bdev_ns holds
nvme_bdev_ctrlr by its pointer, ctrlr. Hence it is not necessary for
nvme_ctrlr_populate_namespaces_done() to use nvme_bdev_ctrlr_get_by_name()
to get nvme_bdev_ctrlr.
To simplify the code, add nvme_bdev_ctrlr parameter to
nvme_ctrlr_populate_namespaces_done() and remove the
nvme_bdev_ctrlr_get_by_name() call from nvme_ctrlr_populate_namespaces_done().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic2013842fad16ea0de49c18b5b853d147c23a6b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6621
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_nvme_no_pi_readv() had not been used for bdev_nvme_no_pi_readv() yet.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9bf815b36ef0daa2f1248f618a9c7e2f1ea62346
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6603
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_part_base_construct_ext is called by spdk_bdev_part_base_construct.
there's already an example if a base bdev is an abnormal case we need to do
spdk_bdev_part_base_free to close the base bdev.
From constructing a successful part base bdev util finishing vbdev_split_create.
there're except failure cases to exit.
if a bdev is open and when runs into bdev_unregister_unsafe, it's in an EBUSY
state, bdev will not finished from the list. That spdk_io_device_unregister
will no be executed in spdk_bdev_unregister.
That a subsytem with it callback which is app_reactors_stop can't be finished.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Idc156557f936da5f2618421ede2619f1f2e29c51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6599
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the same style compared the code in posix_sock_close.
Thus if we cannot close sock->fd, i.e., we leak the fd,
but we can still free the memory related with uring sock.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Id2f0e8a2c7065f100c2b009e76a49b528fd221b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In nvme_bdev_ctrlr_create, calloc will be called with a zero size
allocation request if the number of namespaces is zero. The behaviour
is implementation defined if the size of the space requested is zero -
calloc will either return a pointer that mustn't be dereferenced, or
NULL. If NULL is returned, the nvme_bdev_ctrlr_create will fail.
Only call calloc if there are a non-zero number of namespaces.
Otherwise, leave the namespaces pointer with a NULL value. All
references to namespaces[] are either known to be safe, or occur
in the context of looping through the namespaces which will be
skipped if the count is zero. The exception to this is in
vbdev_opal_create, where an assert has been added to match
equivalent code in bdev_ocssd_create_bdev.
Tested by running unit tests on a system that returns a null pointer
for a zero size allocation.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I058b0683fd9b3a20bf90e54db93ca48b9bb4e40e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The statement causes this issue is:
assert(group_impl->num_removed_socks < MAX_EVENTS_PER_POLL);
The call trace is:
The previous solution is:
commitid with: e71e81b631
But with this solution, it will always add the sock
into the removed_socks list even if it is not under polling
context by sock_group_impl_poll_count. So it will exceed the size of
removed_socks array if sock_group_impl_poll_count function will not be
called. And we should not use a large array, because it is just a workaround,
it just hides the bug.
So our current solution is:
1 Remove the code in sock layer, i.e., rollback the commit
e71e81b631. This patch is
not the right fix. The sock->cb_fn's NULL pointer case is
caused by the cb_fn of write operation (if the
spdk_sock_group_remove_sock is inside the cb_fn). And it is not
caused by the epoll related cache issue described in commit
"e7181.." commit, but caused by the following situation:
(1)The socket's cb_fn is set to NULL which is caused by
spdk_sock_group_remove_sock by the socket itself
inside a call back function from a write operation.
(2) And the socket is already in the pending_recv list. It is
not caused by the epoll event issue, e.g., socket A changes Socket B's
cb_fn. By the way, A socket A should never remove a socket B from a polling group.
If it really does it, it should use spdk_thread_sendmsg to make sure
it happens in the next round.
2 Add the code check in each posix, uring implementation module.
If sock->cb_fn is NULL, we will not return the socket to the active socks list.
And this is enough to address the issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I79187f2f1301c819c46a5c3bdd84372f75534f2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6472
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When there is not enough memory needed to start cache, print
relevant message and inform about possible solutions.
Fixes#1763
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Change-Id: I911dcb4e86ad7e3f2e2b051678736d4e88869db5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6078
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When multipath is supported, nvme_bdev will be got via bdev_subsystem.
To make such change transparent, add a helper function
nvme_bdev_ns_to_bdev() and use it for some cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia5ad0b87178bc739ba0a75789f9f26b860241a04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5801
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
By the recent changes, the linked list nvme_ns->bdevs has only a
single bdev at the maximum. Hence replace it by the pointer
nvme_ns->bdev, and remove the linked list pointer nvme_bdev->tailq.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib976e15bb128ba8479070b58e5f4c43fb9dcf479
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6230
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
By the last changes, not only standard namespace but also ocssd
namespace has only one nvme_bdev, and standard namespace processes
only the head of nvme_ns->bdevs.
This patch changes the common and standard namespace specific
part to process only the head of nvme_ns->bdevs.
The following patch will replace the linked list nvme_ns->bdevs
by the pointer nvme_ns->bdev.
Add a particular error case that nvme_bdev is failed to create even
if ctrlr has one namespace. If ctrlr has one namespace but the
corresponding bdev is failed to create, nvme_ns->populated should
be false and hence nvme_ns->bdevs should not be accessed. However
the code had not assumed such case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5495882fad8c8a012305177179a46d4373ba75f5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5800
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Remove range instance from struct bdev_ocssd_range, and additionally
remove range pointer from struct bdev_ocssd_create_ctx.
Then remove the definition of struct bdev_ocssd_range.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5cb38d17ff2ec852878b481b8974983922fe25d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6225
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The range parameter was deprecated from bdev_ocssd_create(), and
hence one ocssd_bdev can be created per one ocssd_ns now.
Hence process only one ocssd_bdev per one ocssd_ns. The following
patches will replace a linked list nvme_ns->bdevs by a pointer
nvme_ns->bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I824d26f4d2f73326238a6426634e28cfd655a04d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6224
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The user only specifies the starting address of a zone to which to
append to and the actual location is expected to be returned in
bdev_io->u.bdev.offset_blocks.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icc2e9f5461a746d19686d5288075f03d09bf1b19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6441
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Default to using epoll unless __FreeBSD__ is defined. Add macros SPDK_KEVENT
and SPDK_EPOLL to indicate whether epoll or kevent is present. The macros
match the naming convention for SPDK_ZEROCOPY which controls zero copy
in a similar way.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I4c46fb94b254cb075427bfe07a8085887254c45a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Remove ocssd_bdev_parameter from bdev_ocssd_from_disk_lba(),
bdev_ocssd_to_disk_lba(), and bdev_ocssd_to_chunk_info_offset()
including unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaf52e3e33609e9f1fe13050e95020bad688dc6ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6223
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove helper functions, ocssd_range_num_parallel_units() and
bdev_ocssd_num_parallel_units(), and get number of parallel units
directly from ocssd_ns->geometry.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2b8c4765442aff4642ad1eaa38df6694ee7ed43d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6221
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It has been confirmed that there is no affected use case in
the SPDK community when we remove the range parameter from
the bdev_ocssd_create RPC.
Hence, remove the range parameter from the bdev_ocssd_create RPC,
remove range parameter from bdev_ocssd_create_bdev(), remove range
info from ocssd_bdev_config_json(), and then update unit tests
accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1b0a541b61bf26732fd028dc43becb7ca2384f8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6220
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Recent refactoring added a critical bug that no media event is pushed
to the target bdev.
Fix the bug by changing return to break.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia674ea2c9c21d08dd23b50a0f726da55011d4be4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6455
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When socket is being created and zcopy is disabled
by the config, we can return from posix_sock_alloc
function before we try to set quick_ack
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I6670b8337e70ec12b18a5e6753674fbef9e95648
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A single sock connection can call posix_sock_flush,
and this sock may not belong to a polling group.
So add the check in sock_check_zcopy to avoid such issue.
Fixes#1788
Change-Id: Id0a2f80ad0f3cdb7fc736a3be3211e49513751b1
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6334
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Function bdev_nvme_create accpets new parameter - ctrlr
opts which is passed and filled by RPC handler. That
will allow us to add config parameters for other ctrlr
options with minimal changes.
Change-Id: I96ac1b21e7a3816c652765cddade75423eb843ca
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6023
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the quarterly releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 21.04
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I44d01154430a074103bd21c7084f44932e81fe72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6167
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Our userspace driver already supports the SIZE_MAX
and SEG_MAX features so add these two flags in supported
features.
Change-Id: Ibcbe423dbc1e2e8a31a53b34650c59243d35ba04
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When zero copy is enabled in initiator, there could
be the case that a socket connection does not belong
to a polling group, i.e, the application does not use
socket polling group. Then we should actively call
_sock_check_zcopy in posix_sock_flush function when zero
copy policy is enabled.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Idceaa7557eb265daa878db40c922494c3de35ea8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This was experimental code. Besides being simpler it makes perf
analysis easier and gives complete control of whether batching
is used to the application. The framework will now not use
DSA batches for internal operations.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic3139c40371dad64c3bc77818f0ad3f8c31d9af6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5849
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
For flow control reasons we have to resize the bit arrays we
use to manage flow as channels come and go. However since
channels are assigned to devices, until the channel count
reaches the device count there's no sharing so no resize of
the array is needed. So, when we use a device for the first
time there's no need to run through the rest of the channels
and re-balance.
Same thing is done on destruction. The code to free idxd
specific resources was moved from the rebalance function to
the idxd put channel function which is a much more logical
place for it as well.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib4df163286906f413dd6429dc6833af7b68e208c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5846
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In NVMF TCP initiator when zero copy is disabled,
all requests are completed when we receive EPOLLIN event
for socket, add socket to pending_recv list and call socket's
callback which calls qpair_process_completions. As part of
completions processing on NVME level we receive the number
of completions and resubmit the same number of queued requests.
When zero copy is enabled, some transport requests can be
completed when we receive and process EPOLLERR event, it
happens out of qpair_process_completions context. So part
of requests can be completed, transport level contains
free requests but NVME layer don't have info about it
until it calls qpair_process_completions. And there is
a chance that on posix level when we poll sockets we
receive only EPOLLERR flag without EPOLLIN. In this
case we can complete several requests but don't call
qpair_process_completion so we don't resubmit queued
requests. It may lead to a hang in the end of test run
when there are no mo requests to be completed on transport
level (no EPOLLIN event) and we receive EPOLERR only,
so we can't resubmit queured requests.
This patch fixes this problem, it add a socket to
group's pending_recv list if we received EPOLERR
event and completed at least 1 socket request.
So socket's callback can be called even without
EPOLLIN event.
Fixes issue #1685
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I21d5c2fe6eb0787aab9531925a7f0e2fe18bafaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6162
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Users can now generate the necessary linker args for their
own applications using something like:
PKG_CONFIG_PATH=build/lib/pkgconfig pkg-config --libs spdk_nvme
Dependencies between libraries are included in the generated
.pc files, so the user only needs to pass the top-level subsystems
or individual SPDK libraries they are using in their application.
Modules will automatically be added to the output if the associated
library is specified. For example, specifying "spdk_bdev" will include
the libraries not only for spdk_bdev, but also all of the bdev modules.
Users still need to supply the -Wl,--no-as-needed or -Wl,--whole-archive
flags. They cannot be added to the .pc files without increasing the length
of the argument string by a factor of 15x to 20x.
Modify the test/external_code/hello_world Makefile to use pkg-config to
ensure this gets tested at some level in our autotest environment.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie48a75f11969d5d775d514cf10bcb82d197eabfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4371
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to kernel, use an inline function spdk_nvme_bytes_to_numd
to transfer paload_size form bytes to numer of dwords.
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: I8b9ded122bbf4a3c8e46988993ea52404783c0b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5926
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This helps user to locate whether bdev_io fails in
spdk bdev layer or inside Linux AIO.
SPDK_BDEV_IO_STATUS_AIO_ERROR indicates bdev_io fails
due to Linux AIO or its lower layer's failure.
New functions spdk_bdev_io_complete_aio_status and
spdk_bdev_io_get_aio_status can be used to report out
the errno from Linux AIO.
Change-Id: I32640e4a0459cca057278c02ea5a7522f3408a02
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5690
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Usually null bdev is used in testing.
The resize function provides flexibility
Change-Id: I603db0b85ff13a86d38ccc8dd6f260807393df93
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5797
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Need to manage how we store IO context based on DPDK updates
made in 19.11.
Fixes issue #1671
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If1183808cd30987b6c999912f563949b7ade7fcb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Track whether we attached a controller while
polling the probe ctx. If we didn't when the probe
ctx is done, then it means the controller failed to
attach and we need to free the ctx.
Fixes issue #1723.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia7f040a073e4c824c29c0ed493f8391b69f94174
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5818
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
