Added states for keeping track on which reloc
queue band actually is.
Change-Id: Ib05ac4e925002728ddfed3195891f5328eebb0d0
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We need to wait for ANV event completions when
unregistering device.
Change-Id: I872297da98405f16804a6fa1eb1149f0ee55b00c
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468600
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Start processing ANM events only after the device is fully initialized.
Otherwise some of the structures are partially filled and can be
interpreted incorrectly.
Change-Id: Ia741730cf15d44d76ce8afa7955e6a5bf42ca42b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466935
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Track the number of acquired but not yet submitted write buffer entries
to be able to correctly calculate the required number of entries to be
padded.
Change-Id: Ie201681937ad1d03ec125aa5912311c54a7e35c9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466934
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When recovering the data from the non-volatile cache, the data inside
the volatile cache needs to be flushed before flushing active bands.
Otherwise, if the number of blocks in a band is smaller than the number
of blocks inside the volatile cache, part of the data may not get
flushed.
Change-Id: I4e99709c8c2a526a928578870d7fbd5fef37db02
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466883
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moved scrubbing of nv cache to core thread. Added IO channel which is
used in user context, during shutdown of nv cache.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I88e680324e361bf7e0c0a9a9d29323f179c56e3b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Track the band under defrag inside the reloc module. This allows for
multiple bands being defragged at the same time (e.g. extra one due to
write fault) as well as makes it easier to handle cases when relocating
a band that has no valid blocks.
Change-Id: Ia54916571040f5f4dfdb8f7cdb47f28435a466d8
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added assertion to check is there is no any
acquired write buffer entries during shutdown.
Change-Id: I92be8ff07b2bf338acb65a0e37d0cc6ad6962d81
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Padding size calculation should take into account
already acquired write buffer entries in case
number of blocks left for closing band is less than
write buffer size.
Change-Id: I0f9c9bc94eb5a4736eede30ec424c81103e1256f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463525
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changed initialization of io channels to be made in the core/read
thread themselves. This fixes potential hangs when using the ftl lib
directly, without bdev and initializing an ftl device from a different
thread than will be used for IO.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I7089cc46cc6de5e9008e7c22cc01d2b4103ebb14
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464891
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Commit 6708b7 ("lib/ftl: fix the unclear PAGE_SIZE") removed
PAGE_SIZE from lib/ftl, but one PAGE_SIZE remains. I follow
the commit to change the PAGE_SIZE to FTL_BLOCK_SIZE and 4096
for alignment.
This broke my ppc64le build, which PAGE_SIZE is not defined and
should be taken with sysconf.
Signed-off-by: Takeshi Yoshimura <tyos@jp.ibm.com>
Change-Id: I9cabb5ffc4d41e094eae62439ab701579c87d014
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464251
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If an ANM event has come to a chunk/sector that has been marked as
high_prio (eg. after a write failure), there's no need to add any
sectors for relocation, as the whole band should be marked for a move
anyway.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I57824ba7e592540ea639f9f011149210fd688a5a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463289
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remember current write position within the cache when shutting down. It
allows for faster recovery after clean shutdown (no need to scan the
device) as well as grants a quick way to distinguish between clean and
dirty shutdowns.
Change-Id: I79c22caa0b1ca4373951ac43f747b085d331cdd0
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460796
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Moved metadata header verification to a separate function, since the
metadata read callback got pretty large.
Change-Id: I0c8b2eb493631a6495ce2ef7d9586d2c7cb7772f
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460795
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In case shutdown occurs during band relocation
we can have situation that on retry queue are
some internal IOs and we need to wait to drain
this queue before we start shutdown sequence.
Change-Id: Ie5b33732568aeda0586f4de384b22dcf463bf31e
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
It's possible there's a delay between spdk_ftl_dev_free setting
dev->halt and sending message to core thread which would set
reloc->halt. This patch should bridge this gap and prevent potential
additional/unneeded relocations from happening.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I3d69fe86900c9233fadd8e3795accb36b1c01791
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461598
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Changed write_config to use the ftl configuration file instead of
allow_open_bands directly. This allows for easier expansion of saved
fields.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Ie1d480983636f26840dba9a3a6c93b2883903bdb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460519
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixed touching NULL write pointer, which would happen after some other
I/O in the same band would receive error and issue its deletion. Any
subsequent write callbacks would then be unable to find and update the
information.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I07d9791f1b1b673a48356fae55b784c0bf6a6f7a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_nvme_ctrlr_get_ns() can return NULL, which was
not verified, but dereferenced anyway.
Change-Id: Ib0554148cc47ea3ff2afa1862ac962f284fe6d43
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is just assert to assure the Klocwork
static analizer that wptr is not NULL.
Change-Id: I003620431afb8497a57c50af8480c34ec3fac6d6
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462489
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ftl_io_free() handles NULL io being passed, but shouldn't
dereference it before returning.
Change-Id: Ia705d4ab9f8b3569e9704a1f97e70f7579084efb
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since 4k alignment is no longer required for I/O buffers, the
band doesn't need a separate lba map and dma buffer and can use the
same memory location.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Iea127e8c2f39e6de5d57258098b2dc6be56f439f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Ftl should no longer require 4k alignment for I/O buffers for either
internal or external requests. The 4k alignment was needed due
to a bug in QEMU when handling internal SGL buffers in LNVM commands.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Icafc14b7811c9c0ffa13789e341c453503cf2821
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Code on line 613 should never be reached for last
chunk on the band, since it is checked on line 606.
This assert verifies that, all chunks before last
are not NULL.
Change-Id: I78a9967f91c0873981b3308e888d85fa7c8d6641
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462488
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moved the spdk_bdev_io_get_iovec() after the verification that io
succeeded.
Then added return path when iov could not be retrived from bdevio.
Change-Id: I2638e6657fd08a2dd85ab0906383cecef8fb4f4a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Adding some extra debug information for any failing IOs.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: If38de30bcb80d291778ad7325a33b7786d02390d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461588
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since the local is only used in the SPDK_DEBUGLOG call, it was causing
the build to fail when the configure options --disable-debug and
--enable-werror were supplied together. This can be seen in the most
recent nightly builds.
Change-Id: I32112cf832a705292783da4e841badaeed17dbb6
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461746
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the data from non-volatile cache was recovered, but the state of the
cache isn't clean (i.e. no range overlap, two different phases at max),
scrub it, so that subsequent recovery can be performed successfully.
Change-Id: Ic8b5cbb6e02444bc99d4700bfe3dfbb33f06ef24
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
The cache needs to be scrubbed during the initial device creation as
well as after power loss recovery. This patch extracts the scrubbing
code into a separate function.
Change-Id: I2cb32e6993a3531470f29f466d990f0d96e45def
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
The header is being written from multiple places, so having a discrete
function serializing and writing it at the appropriate place in the
cache makes sense.
Change-Id: I7a1e6ebd05e8a4974d141f04202803f507b978e4
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
This patch adds a function that marks all active open bands to be
flushed and once all of them are closed it notifies the caller. This
needs to be done before the data from non-volatile cache can be scrubbed
to make sure its stored on bands the device can be restored from.
Change-Id: I9658554ffce90c45dabe31f294879dc17ec670b9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459619
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch makes sure we're on the thread that requested creation /
deletion of the device when calling the notification callback.
Change-Id: Ia11a8054692874f6b57d4ebe3e3cb290c58e83b6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Added ftl_dev_has_nv_cache to check if the FTL is configured to use
non-volatile cache or not. It makes these checks a bit more readable.
Change-Id: I0140df184d89a675e40bd5056718cd64301c553e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459617
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Wait until all user writes are completed before writing band's metadata.
Otherwise in case of power loss, user data might not get written while
the metadata does, which would result in data loss.
Change-Id: I419862960c072e38265b91d0d0498ff0c6f9f29e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459615
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the data placed on the non-volatile cache to perform recovery in
case the device wasn't shut down cleanly. The write phase ranges are
read and their data is copied onto the OC device.
The code added in this patch will correctly copy the data from
overlapping ranges, however it won't do anything about these overlapping
areas, so subsequent power loss happening quickly after recovery might
result in data loss.
Change-Id: Ib4c66092cee858496ec66f789fcfb1e7e32f5c20
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Scan the cache to find ranges of blocks written with the same phase.
This prepares the structures needed to perform data recovery from the
non-volatile cache.
Change-Id: I0c901d010d6ca76feabca13116d831c1d9931833
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458103
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
The structures in this module had no comments, so it was a bit hard to
understand what they're used for.
Change-Id: I439c8a792f02b929006c60933e6b272751b1a675
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458102
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moving data from one band to the other doesn't need to be stored on the
non-volatile cache. Not only does it add unnecessary traffic to the
cache (wearing it out and reducing its throughput), but it requires us
to synchronize it with user writes to the same LBAs.
To avoid all that, this patch adds the FTL_IO_BYPASS_CACHE flag to all
writes coming from the reloc module. However, to be sure that the moved
data is stored on disk and can be restored in case of power loss, we
need to make sure that each free band have all of its data moved to a
closed band before it can be erased. It's done by keeping track of the
number of outstanding IOs moving data from particular band
(num_reloc_blocks), as well as the number of open bands that contains
data from this band (num_reloc_bands). Only when both of these are at
zero and the band has zero valid blocks it can be erased.
Change-Id: I7c106011ffc9685eb8e5ff497919237a305e4478
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458101
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some of the writes doesn't need to go through the non-volatile cache
(e.g. relocations, data recovery from the cache). This patch adds IO
flag to indicate that the write shouldn't be stored on the non-volatile
cache.
Change-Id: I3d485fe14cf25b3074832f26491ba0cb12ff0e58
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458100
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Initialize children IOs with the appropriate LBA of its parent when
allocating internal IOs.
Change-Id: I191ad741b9d88d7f18cae05982e0a06a8f371f78
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
This patch adds tracking of the phase of the writes to the non-volatile
cache. The phase is changed each time the whole buffer is filled. Along
with every block's LBA, current phase is stored in its metadata. This
allows for replaying the sequence of writes when recovering the data
from the cache after (unclean) shutdown.
Since there are only three possible phases to be stored on the device at
a time, phase is defined as a 2-bit counter cycling through 1 -> 2 -> 3
-> 1, with 0 marking blocks that were never written.
Change-Id: Id47880367934027fd102c32f183110acc9d4c62a
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458098
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
After filling whole non-volatile cache, block all further writes until
the header with metadata is written. This means that metadata stored on
the device will always be up-to-date with the most recent write
sequence.
Change-Id: I15b724b52814289622374ce77e5c3b23173a75c6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Check the type of DIF used by the bdev specified as the non-volatile
write cache. If it's anything other than SPDK_DIF_DISABLE, fail the
initialization, as we don't support any other type yet.
Change-Id: Ie8bc1729558e055989d7925bc55f6307ee738f0e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
When restoring the device, read the first block of the non-volatile
cache containing its metadata header and verify that it's indeed a
device that was used as write cache.
Change-Id: Idf113a9e8eb73160a2d9e6e882c9e026d3fafb3e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When creating FTL device using non-volatile cache, zero out the
non-volatile cache and store metadata (device's UUID, size of the cache)
in the first block.
Change-Id: Id8f212aef756e86e8a215582ab7c32a635e18938
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
/spdk/lib/ftl/ftl_reloc.c:507:8: warning: Assigned value is garbage or undefined
move = moves[i];
^ ~~~~~~~~
lib/ftl/ftl_reloc.c:508:11: warning: Access to field 'state' results in a dereference
of a null pointer (loaded from variable 'move')
switch (move->state) {
^~~~~~~~~~~
Change-Id: I9cc1c2b52a93957bb4c56b1ed463c23289b5a43d
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460120
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
