There are 2 messages passed between when
_nvmf_ctrlr_free_from_qpair is executed and when
nvmf_ctrlr_destruct is executed. That leaves time
when the controller->qpair_mask is not a valid
pointer, but it is still in the subsystem
controllers list.
The purpose of this patch is to close that hole.
It is part of a larger series aimed at cleaning up
the controller destruct path.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0c0199c8392ee278f36df56f599beb10e7a46948
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3685
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Calling spdk_nvmf_tgt_accept() now automatically assigns new qpairs
to the best available poll group.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3df2a2c5a28dba45c5ba0cbd1e8c28dd7e56cf9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2813
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The plan is to push the logic that assigns qpairs to poll groups down
into the nvmf library. To do that, we'll need to have a list of the poll
groups.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iea59ac1a439dbd1bcae68fb2977a47a855884a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2811
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
This parameter describes the number of admin and IO
qpairs while admin qpair always exists and should not
be configured explicitly.
Introduce a new parameter `max_io_qpairs_per_ctrlr`
which configures the number of IO qpairs.
Internal structure of NVMF transport is not changed,
both RPC parameters configure the same nvmf transport parameter.
Deprecate max_qpairs_per_ctrlr in spdkcli as well
Side change: update dif_insert_or_strip description -
it can be used by TCP and RDMA transports
Config files parsing is not changed since it is deprecated
Fixes#1378
Change-Id: I8403ee6fcf090bb5e86a32e4868fea5924daed23
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
I missed a few files in this library the first time.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2ad55355e6348eaa10384a148dd45deb9f68fc2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
As soon as we disconnect the qpair, the initiator can submit an
additional request to connect a qpair with the same qid as the
one we connected.
This series is aimed at making sure we don't acknowledge a disconnect
until we have cleared that bit.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I76d9312448a9740911465c146a195996cc567370
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1880
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
The next patch will create poll group threads dynamically for
NVMe-oF target, and will need to wait for completion of poll group and
I/O channel destroy. This is a preparation for the next patch.
Add callback function and its argument to spdk_nvmf_poll_group_destroy(),
and to struct spdk_nvmf_poll_group, respectively.
The callback has not only cb_arg but also status as its parameters even
if the next patch always sets the status to zero. The reason is to follow
spdk_nvmf_tgt_destroy's callback and to process any case that the status
is nonzero in future.
spdk_nvmf_poll_group_destroy() sets the passed callback to the passed
poll group.
Then spdk_nvmf_tgt_destroy_poll_group() calls the held callback in the
end.
This change will ensure all pollers are being unregistered and
all I/O channels are being released.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb854066a5259a6029d55b88de358e3346c63f18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was recently made asynchronous to support virtualized transports.
However, we're moving to add a new call to associated a listener with a
subsystem to transports and the operation that needed to be asynchronous
will actually be performed there. For simplicity, make this synchronous
again.
Change-Id: Ie98136a19c58f0f9bba0d140476de3bbb38e12d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Had to remove one part of a unit test because the null
checking is moved to a different function.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I0a95d0a9a9a5708416fdc7efefb36e17b1ffe010
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/480008
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
There is a spdk_nvmf_tgt_listen() which opens a port for specified
transport (trid) which opens possibility to accept new connections
from initiators. However there is no counterpart of this function
(i.e. spdk_nvmf_tgt_stop_listen()), which would stop listening.
Instead the current code relies on spdk_nvmf_subsystem_destroy()
to stop the listener, which seems to be wrong.
Fixes#1129
Change-Id: I6e73d8c234dc451f0fee8394132eae34cd4f4756
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479873
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This would allow to respond for add listener rpc request even
when there are async calls in transport specific function.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I94a9f45b7ba9e8d46a60ae3785953cea12554732
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function previously accepted a trtype enum, but needs to be able
to accept a string to support custom transports.
Change-Id: I931aed30ca3be65468552ffa1bb1ef3f91275fda
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The trtype should be stored as both an enum and string. This is intended to
help pave the way for pluggable NVMe-oF transports.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6af658d7a17c405e191ff401b80ab704c65497e7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
It can be useful for passing additional information about nvmf
target to a handler for new nvmf connections. Context can be
stored in globals as it is currently done in nvmf code. However
in case of multiple targets or languages where accessing global
state is challenging (i.e. Rust), this becomes inconvenient.
Change-Id: Ia6a2fdba4601531822b3e5fda7ac5ab89d46f6c5
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469263
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
The previous version of this function precluded one target name from
being a leading substring of another. i.e. if "nvmf_tgt_1" was already
used as a name "nvmf_tgt_11" could not be used subsequently.
Just an odd quirk that shouldn't be the case.
Change-Id: Iea59b6757512f01070e48074e35a11d942e399bb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Functions added in this patch:
spdk_nvmf_tgt_get_name - get human readable name from target.
spdk_nvmf_get_first_tgt - start iterating over global list of targets
spdk_nvmf_get_next_tgt - get next target in iteration
These functions will facilitate the following RPC
nvmf_get_targets - get the names of all active NVMe-oF targets.
In this series, I will also add two more RPCs, nvmf_create_target, and
nvmf_destroy_target, as wrappers around the create and destroy
functions. Since all of these changes are pretty minor and closely
related, I will just do one big changelog entry at the end.
Change-Id: Ia9f1248fbf9726fa3889998a169211fb25e724f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Keeping a global discovery log page was meant to be a time saving
mechanism, but in the current implementation, it doesn't work properly,
and can cause undesirable behavior and potential crashes. There are two
main problems with keeping a global log page.
1. Admin qpairs can be assigned to any SPDK thread. This means that when
multiple initiators connect to the host and request the discovery log,
they can both be running through the spdk_nvmf_ctrlr_get_log_page
function at the same time. In the event that the discovery generation
counter is incremented while these accesses are occurring, it can cause
one or both of the threads to update the log at the same time. This
results in both logs trying to free the old log page (double free) and
set their log as the new one (possible memory leak).
2. The second problem is that each host is supposed to get a unique
discovery log based on the subsystems to which they have access.
Currently the code relies on whether the discovery log page offset in
the request is equal to 0 to determine if it should load a new discovery
log page or use the cached one. This is inherently faulty because it
relies on initiator provided value to determine what information to
provide from the log page. An initiator could easily send a discovery
request with an offset greater than 0 on purpose to procure most of a
log page provided to another host.
Overall, I think it's safest to not cache the log page at all anymore
and rely on a thread local fresh log page each time.
Reported-by: Curt Bruns <curt.e.bruns@intel.com>
Change-Id: Ib048e26f139927d888fed7019e0deec346359582
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466839
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function will allow applications (and RPCs)
to obtain an spdk_nvmf_tgt pointer by name.
Change-Id: I82792e06a819e06d9fddb5429830008653d92cd1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will provide a unique identifier which can be used to provide get
and set methods within the RPCs.
Change-Id: Idd144e99e49b8d26530f60530d2e908b18fa251b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is necessary to allow the spdk_nvmf_tgt structure to evolve over
time without having to further change the target API.
Change-Id: Ib0f0f9b1f190913feff0229c96df4e84b1bf35f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
As part of moving the nvmf rpc code to the library, we will need to make
it more inclusive of use cases outside of the example spdk nvmf_tgt
application. That application only supports a single nvmf target
structure. As such, many of the RPCs have this assumption built into
them.
In order to enable the multi-target use case, we need to configure a way
to translate between user supplied RPCs and actual target objects in the
library.
Change-Id: I5d3745afe9c2ca1c33f6e1a1bcc2b8bb3196ccd6
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465329
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
NVMf statistics functions use spdk_get_io_channel function to get a
poll group. It increases reference counter in io channel and causes
problems on application exit. spdk_put_io_channel calls were added to
release the channel.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I832d1eae346c3bc3858ed0ed063ff7a7a897a2f5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463389
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds nvmf_get_stats RPC method and basic infrastructure to
report NVMf global and per poll group statistics in JSON format.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I13b83e28b75a02bc1dcb7b95cbce52ae10ff0f7b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch is used to do the following work:
1 It is optimized for NVMe/TCP transport. If the qpair's
socket has same NAPI_ID, then the qpair will be handled
by the same polling group.
2. We add a new connection scheduling strategy, named as
ConnectionScheduler in the configuration file. It will be
used to input different scheduler according to the customers'
input.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ifc9246eece0da69bdd39fd63bfdefff18be64132
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
By capturing this pointer onto the stack, we inform the compiler
that we don't expect it to change. That allows the compiler to
generate more efficient code.
Change-Id: I0f3ff9373662198e915269c4498e4902a2cdb808
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459754
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This signals to the compiler and analysis programs that this
won't change during iteration, so it may produce better code.
Change-Id: I478c0c9445d4ddf8a69ab1b3deaf628b82a0eaea
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
For the nvme device, I/Os are completed asynchronously. So we
need to check the outstanding I/Os before putting IO channel
when we hot remove the device. We should be sure that all the
I/Os have been completed when we change the sgroup->state to
PAUSED, so that we can update the subsystem.
Fix#615#755
Change-Id: I0f727a7bd0734fa9be1193e1f574892ab3e68b55
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Existing condition for updating subsystem poll group's reservation
information is wrong, when received the RELEASE command, the
reservation type may be changed to none, but it will not be
saved to the subsystem's poll group.
Change-Id: Idc177a0f03fb9611d6eda1e25a5b90caaa73d1be
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450727
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now data structure spdk_nvmf_subsystem_pg_ns_info holds all the
reservation information from the associate namespace, so for the
IO processing routine we don't need to send a message to the
subsystem's thread to check the IO command is permited or not.
Change-Id: Ib6be6abf7bf5f24c230dff80c163a1eb963e20d0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Array channels in the subsystem's poll group are indexed by
nsid - 1, so rename the previous num_channels to num_ms
makes more sense. Also embed the channels into a namespace
data structure here, and this can be reused in the following
patch.
Change-Id: If5d9aab4b1d5bcf7a3c22f29fa58d84752f0d4cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This intermediate state is unused and meaningless. the qpair transitions
into this state right before calling a synchronous operation and then
transitions to active as soon as that operation completes successfully.
If the operation did not complete successfully, we were leaving qpairs
in this weird intermediate state when for all intents and purposes they
had reverted to an uninitialized state. Keeping qpairs in the
uninitialized state until they have been added to a poll group creates a
meaningful distinction between states that can be actionable from the
transport level.
Change-Id: I6de9bc424b393b6fff221aa2f4212aaa91488629
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
