Redundant with lib/nvmf/rdma.c spdk_nvmf_rdma_create,
line 1177 and 1178:
rtransport->transport.tgt = tgt;
rtransport->transport.ops = &spdk_nvmf_transport_rdma;
Change-Id: Id680c5537aa3df70d6f8c148aa8dc2726ccf8877
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/415203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This helps prevent starvation in the case where a thread
is started but remains idle, while other threads consume
all of the spdk_bdev_io buffers in the global pool.
This starvation issue is fairly theoretical at this point,
but future patches will be adding the ability for callers
to be notified when an spdk_bdev_io becomes available if
the pool is exhausted. We will add tests to stress
pool exhaustion at which point this patch will become
much more important.
While here, increase the minimum bdev_io_pool_size to
account for the mgmt_ch getting destroyed and then
immediately created again on the master core. In this
case there is a window where both channels exist at
once - the one being destroyed won't free its cached
spdk_bdev_ios until the deferred spdk_put_io_channel
event executes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3a2fc80bc2bfd78b098bcbfce456d7a433cd64e9
Reviewed-on: https://review.gerrithub.io/415039
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
We should not allow write_zeroes commands if the descriptor
was not opened for writing.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56bc729d12089df90637b202dfe25f5505e9b712
Reviewed-on: https://review.gerrithub.io/414896
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_io_valid_blocks() already takes care of this.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia7e5ede8d65d0b336ea676d5e25d07a3389573a5
Reviewed-on: https://review.gerrithub.io/414895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I3e53773570e66c1f52a6c29c6709684fc393717e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used to check timeouts.
Change-Id: Ib3cabd3c65a87ffac451e21ac5c786403298c346
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414882
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Future patches will need to remove elements from the middle of the list,
so a singly-linked list won't be efficient.
Change-Id: Idad5df3aea08d58fef2e19770509363441f757c7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414881
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add an new RPC, scan_ioat_copy_engine, to scan IOATs for copy engine
dynamically. This patch is to keep compatibility to current config file.
Change-Id: Id1378fcda04fc5a868e373acc076bc34eeca01ae
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/411842
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is to improve readability and clear logical structure.
Change-Id: Ib67e03afb5a40df047f3829baad56656d90e5a54
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/414927
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some code which doesn't follow the coding rule are fixed.
Unnecessary blank lines are also removed.
Besides, unfulfilled 80-char line length limit degraded readability and
adjust some of them.
Change-Id: I1d12fc81cc867af38380bd038869ffe587c78592
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/414926
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I do not think that this variable is needed.
The rpc system will be always executed in the first
call, so there is no sync issue, add a deleted variable
and put the free in the loop sounds not very clear.
For the ASAN issue (use req after free), I think
that the correct solution is that: we should store
the context first instead of defer the free of req.
Change-Id: I49ca2708ddc2c5533bb3a0aee4622ae23bfe47c6
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/414726
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This was partially fixed in commit 1e481d0438 ("nvmf: Do not allow NN
to change while connections present"), but we did not handle the case
where the user asked to add a NS with a NSID outside the current NN.
This patch reworks the logic (again) to be more straightforward and
hopefully more obviously correct.
Some confusion between max_allowed_nsid and max_nsid is also clarified;
if max_allowed_nsid is set, then max_nsid == max_allowed_nsid at all
times, so we don't need the extra logic when calculating NN in
spdk_nvmf_ctrlr_identify_ctrlr().
Change-Id: If531baf1114e03441ff3e1e1be098071702d9056
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is one of the construct_nvmf_subsystems parameters, so we need a
public API to retrieve it for informational purposes and for the
JSON-RPC configuration dump.
Change-Id: I8a7cafa487209311e964ea9ff1b8e09ee8b23c07
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414864
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently this just includes the overall size of the
spdk_bdev_io pool and the size of the per-thread
spdk_bdev_io caches.
Later patches will allow configuring these via
INI config file and JSON-RPC.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7e235ee6d2d7123d8460eeacde999c7b51017c43
Reviewed-on: https://review.gerrithub.io/414710
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will return the number of currently allocated threads.
Modify the bdev_io caching code to use this new API since these
caches are really per-thread, not per-core. SPDK does not support
dynamic threading yet, but once it does, we will want callers to be
using functions from the thread API - not counting the number of cores
allocated to the application.
spdk_env_get_core_count may still be useful as a helper function, so
it is still kept and not deprecated. For example, app.c uses it to
print the number of cores allocated to the application. bdevperf should
eventually be modified to use spdk_thread_get_count, but holding off on
that for now until spdk_event_allocate() uses threads instead of a reactor
lcore to specify where the event should be executed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5a30e3e825e6821da87d3927a2443768dfd740f4
Reviewed-on: https://review.gerrithub.io/414709
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
JSON library will try to free any non-NULL string pointers so this array
need to be initialized.
Change-Id: Id352cc562cae4d4d11de3dcfca6115d6d0948ddc
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/414857
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This corrects return code value of the bdev iscsi pollers. It was
needed to ensure all the pollers output consistent return code
values. This will further help in measuring consistent poller busy,
idle or unknown tsc stats.
Change-Id: I19c678bee9079f6aa453a4b925819a5ea1086534
Signed-off-by: Vishal Verma <vishal4.verma@intel.com>
Reviewed-on: https://review.gerrithub.io/414722
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove the old trace points since they didn't actually
work. More trace points should be added in the future.
Change-Id: I1b658af8e309137882c31460723d7bb94d555b79
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414280
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ee5d296b6c831447e2af6c4cb4c24b6c676a92b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/414743
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Target might want to send Asynchronous Message that we need to handle.
Of course this need further work but at least we can respond to NOP
This patch also open a way to remove bdev_iscsi_conn_req structure as it
make more troubles than need when managing connections request.
Change-Id: Ib5bc8ae3bc5f90219bb4e13aee1b2e637b458236
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/410891
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some features are per namespace and require a namespace ID; the existing
get/set feature functions do not allow passing NSID, so add new API
functions that do:
* spdk_nvme_ctrlr_cmd_get_feature_ns
* spdk_nvme_ctrlr_cmd_set_feature_ns
Change-Id: Ia7dc96e57badf1a56489785fb288493592b58b80
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/414706
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds to nvme driver new public API dedicated for
Open-Channel:
* spdk_nvme_ocssd_ctrlr_cmd_geometry
Change-Id: I69592618d9bcc280346258e771195683d5b33893
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/412816
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch changes the default setting of IOAT copy engine from
Enabled to Disabled. Accordingly this patch changes the config file
specification for IOAT copy engine from "Disable Yes/No" to
"Enable No/Yes".
Subsequent patches will add a new JSON RPC to configure IOAT
copy engine dynamically.
Change-Id: I754990cbb6ecc096953dd2fb9d34366b91111bf8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410757
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Two new RPCs allocate and initialize options and conf dynamically.
Initialization of NVMf subsystem skips initialization of them
if they are already allocated.
To use and test them, add python script too.
Change-Id: I3be83c33edf9960cb4340d52abb47b7331a6fb92
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/406932
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
apptag and its mask are required to set proper PI
elements in nvme read/write cmds.
Change-Id: Ibabc4738f637d13ea16246d5e77e7d045f032af8
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/414786
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is to add the core control policy for the
bandwidth rate limit (max bytes per second). Change
the existing functions for a common name and specially
handle the case when IOPS and bandwidth rate limiting
are both enabled.
Change-Id: I9f4565958d472559ef6d8bea52b1fe2a5f3c8969
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/413821
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To support the bandwidth rate limiting besides the IOPS rate
limiting, this patch is to add the support of the configuration
parse. The format will be as following to have a 10 (10M)
on the Malloc0 bdev. The default unit is in MB.
Limit_BWPS Malloc0 10
Change-Id: I62d70391ccad7804e6673ec56a3ed1cb0a4fbbd4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/413652
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add spdk_bs_dump which dumps low level blobstore metadata
information to a specified FILE.
Also add a corresponding -D option to blobcli which
utilizes this new functionality.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad018b70f8caa4f950d55dd308b9000d55d885ae
Reviewed-on: https://review.gerrithub.io/414479
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I6babd4cf990bf19b510db88bdfb0ca81e29d9252
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414700
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes more sense as a first class library.
Change-Id: Ibd5c578f8708bd8c7d83fe1629e97c9a3316b56b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414698
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reason: It should never fail, which should
comply with the logic in nvmf_tgt_destroy_poll_group.
For the current case, if the judement fails,
we still add the g_active_poll_groups, the logic
is not correct. And according to the analysis,
the poll group creation should not fail.
Change-Id: I408ee1e8099f709330b8a6ffd26cf27d6a549bed
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/414565
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
_spdk_blob_insert_cluster_on_md_thread() is defined and used in the same
file, so it doesn't need to be exposed outside of the compilation unit.
Change-Id: Ifc327a3d80cae47b28fa2a9ba77471a9b80c83e0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414702
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Avoid mentioning "trace"; the -t flag controls SPDK_DEBUGLOG output,
which used to be called TRACELOG, but now the mention of "trace" is just
misleading and causes confusion with tracepoints.
Change-Id: I537d08d8ca216be0240b318918aa22127f9d636d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414701
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This removes checks for timer poll iterations
within a reactor.
Change-Id: Id8eea26dab201064123575998b3b24e1f609ac5a
Signed-off-by: Vishal Verma <vishal4.verma@intel.com>
Reviewed-on: https://review.gerrithub.io/412694
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will simplify remove operation a little.
Besides a few unnecessary blank lines are deleted.
Change-Id: Ifd312e5a94ba0668d884dd5baf1ef1f2ebd4417c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/414562
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Try to make the logic of the function a little clearer.
Change-Id: Ic78bed73feef94d94487f0a4240019789be8d2bc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/414353
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the name of hot plug to hot remove not to confuse.
Change-Id: Ifc8de3452de72a08eba0e9ea942217e5342b2ef4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/414352
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A couple of files were accidentally marked as executable.
Change-Id: I89ff0bc037fba1b5d073ceea55c78fb5d9cb19b2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We need -lrt as well as -luuid. I'm not exactly sure how
this worked previously - but updating my dev box to
Ubuntu 18.04 LTS hit this problem. Any linking done
in the SPDK repository always uses SYS_LIBS which
includes uuid and rt so we should use it for linking
RocksDB db_bench as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I243e7745ebe528d3b6c1e705cdd20716a041a098
Reviewed-on: https://review.gerrithub.io/414478
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This allows applications to trigger printing of the
default SPDK command line option usage messages if
needed. This could be useful in cases where the
app expects the user to specify a parameter and
finds the parameter was not specified after
spdk_app_parse_args() is finished.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6f2ebdfe1488091a539830f9e78e342a6c601382
Reviewed-on: https://review.gerrithub.io/414472
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It will also help the debug for the memory leak of
iSCSI tasks.
Change-Id: I524962ae1e3278aaf6aca12cc85a5e0f616c3001
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/414623
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is not needed since now we have group iSCSI
poller
Change-Id: I99127a62fc84cee5088b16c908edd78876d0fcfb
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/414620
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The default is still to retrieve the bdev UUID, but now the end user may
also specify their own UUID if desired when adding NVMe-oF target
namespaces via construct_nvmf_subsystem or nvmf_subsystem_add_ns.
Change-Id: I950eb84b9fdecbc2eae8ca39d9acd6acabe8d31d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414269
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I23c34d4dcb542aa9ab3fa8cb734cf9cc0e0fc5da
Reviewed-on: https://review.gerrithub.io/409144
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The spdk_jsonrpc_server_conn_remove() was just swapping last connection
with that is being removed. This was fine but not for BSD queues which
rely on its own address.
Simple fix would be to add STAILQ_INIT and STAILQ_SWAP for queued
requests but we can hit the same nasty and easy to overlook bug in
future. Instead convert connection array to linked list and move around
only pointers.
Fixes#322
Change-Id: Ibb359d281f6164bcd17df37ba9d31ffdb46c2e0a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/414257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Factor qpair destruction function so that we can put common
resource release together in future.
Change-Id: I44139947820c2a384b745ae2673799f1b736369c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This includes when the SSD's BDF is valid, but not attached to UIO/VFIO.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8de639164f8674014d9e2cc31815b86ce3cba64f
Reviewed-on: https://review.gerrithub.io/414063
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I9552354d620986c2a3d6b071f32b587e9e683198
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413861
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The qpair mask can be used instead.
Change-Id: I9063e656c7c44663dc96adfd5ef52a5a1065d2ba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413860
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Instead of scanning a list of all qpairs, use a bit
mask to determine if the requested QID is unique.
This is not for performance reasons, but because
eventually the ctrlr's list of qpairs is going to
need to go away.
Change-Id: Ic25ee60e4f9cd9d596815719760d5be892f29d0c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413286
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will allow us to make the start_nbd_disk method choose an available
/dev/nbd* node automatically in an upcoming commit.
Change-Id: I3c6eb67e7e0c513212eba17139fd0cc96bf9b6dd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413847
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be used in other transports as well.
Change-Id: I05026b0dfea2647d61a173379aca368ca48a2f52
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413864
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If requests are in flight at the time a timeout callback is configured,
we can't retroactively get the submission time of those requests; treat
them as not having a timeout.
Change-Id: Ic589e874a0f2c8c7f4ce352afa7c3aea33b01fae
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is the first step toward timeout handling for other transports.
Change-Id: I386dd990f667d449e94ba4bcedaa3435743755fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413862
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was partially fixed in commit ddeaeeec19 ("nvme: Only check
timeouts on requests from the same process"), but the function that
calls nvme_pcie_qpair_check_timeout() was also erroneously filtering out
the admin queue. Restore the original behavior of checking all queue
types.
Change-Id: I26a44ff5eb772735d314ce7b8322ba9222675911
Fixes: 31bf5d795e ("nvme: make timeout function per process")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/411628
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
verified on QEMU NVMe for OCSSD 2.0 and RFC will be shared soon
Change-Id: I01c513e30768ac1961a5c5af20de3a2490da7729
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/413854
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I6182eb3a77d23db7088703492d71349e3a4b6460
Reviewed-on: https://review.gerrithub.io/399366
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For attach/detach command, the identify namespace data should be
updated during the namespace attribute notice event callback, while
here, in case of the driver may not set aer callback, so update the
namespace identify same with attach command.
Change-Id: Ie594b2ff646a67488d03af2771c00f9947395aba
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
QIDs need to be validated for both I/O queues and admin
queues, so move the checking to a common path.
Change-Id: Icb2009b3fe4d70f146b741c046812d9df62cc2fb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413859
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This one is actually a bit tough to deduce in the specification.
The NVMe-oF spec says that QID errors detected in the RDMA
transport shall return an RDMA-specific error indicating
the problem. However, our code doesn't detect the error in
RDMA-specific code, and it isn't clear if the language is
a "must" or a "should".
The NVMe specification does clearly indicate what error
to return on invalid QID in response to a Create
I/O Queue Pair command. For now, return that while
we game plan whether we need to call into the RDMA
transport to correctly report this error.
Change-Id: I7faf37bad9b9202bc50a906214a51c17e4808fc0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413858
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When the shadow doorbell feature is enabled, no actual MMIO takes place
when a shadow update is sufficient; tighten the bounds of the updates to
g_thread_mmio_ctrlr in the two doorbell update locations so that we only
need to touch the thread-local variable when actual MMIO access is
required.
Change-Id: Ida974bec33f56cbb9f7d3611f483c6975ec773ab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413856
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch does a little cleanup of SPDK SCSI layer APIs.
spdk_scsi_task_alloc_data() is only used in spdk_scsi_task_scatter_data().
spck_scsi_task_free_data() is only used in spdk_scsi_task_put().
The latter was called in UT code but this can be removed without any
degradation.
SPDK SCSI layer is relatively matured and these will not be used
out of lib/scsi/task.c.
Additionally memory leak detected by ASAN is fixed in this patch.
Change-Id: I8eff7b4dbfc307c211087734649a9b9b10555f8d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/413872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Suggested-by: Ziye Yang
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6ca7f08aed2e12c59518269c7b277895b4817bd8
Reviewed-on: https://review.gerrithub.io/413844
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is consistent with the Open Channel naming we are using elsewhere.
Change-Id: Ib088359bed29a958f8b50e41cf34143a23429f54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413840
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
int16_t is not used in SPDK yet. Hence add decode function only
for uint16_t.
Change-Id: I86f86a6768d95896d1840370f2d176c770c41418
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/413711
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also, as we are here, switch to new spdk_json_write_named_* API in
bdev_iscsi_dump_info_json()
Change-Id: Ib29466eb5c6d6496dd1d8efc1f2064577bf56272
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/406635
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also convert bdev_iscsi_set_module_init() into new callback.
Change-Id: I439369180e1e10eab5dee6aba27ffb0489ea2550
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/410095
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMf cnx acceptor poller is changed to check the asynchronous events
from the RDMA devices.
RDMA async events are polled together with RDMA CM events; the file
descriptors are combined into a poll fd array and processed in a single
poll syscall.
The errors handler is an empty placeholder for this patch, it just
prints the kind of event read from the IB device context.
The work for implementing event handling is left for later.
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Change-Id: Ib167990651b585090aceef1404a88d431a910226
Reviewed-on: https://review.gerrithub.io/412540
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This begins the process of hiding data members in
spdk_bdev_io that don't need to be accessed from
within bdev modules.
One strategy would be to implement accessors for
every data member in the structure. However, that
may have negative performance effects. Instead,
create a new internal structure within the old
structure. This new structure will still be visible
for now, but at least makes clear which members
are accessible and which are not.
This patch shifts one data member to the new structure
as an example.
Change-Id: I68525db995325732fe9f5fc3f45b06920948309b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412298
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I841d7b47bc85498abb608944587e7b7585138263
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411588
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reduces submission+completion time by 10-15
core clocks per IO on an Intel Xeon Platinum
processor. Similar improvements should be seen
on other processors as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3241ba53ef5f21a8eef930b523a951525922e6b8
Reviewed-on: https://review.gerrithub.io/413284
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This variable will no longer be static in a future patch.
So make the name a bit more verbose since it will now
be visible outside of the module that defines it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e720ef44aa5c5f38e0fe91de091a89b9970fcb7
Reviewed-on: https://review.gerrithub.io/413283
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The memset was zeroing a lot of bytes that get
initialized either later in this function or elsewhere
in the submission code path. Eliminating these
extra memsets saves a few nanoseconds of CPU overhead
in the NVMe submission path.
Note: one use of the cpl data member depended on
the nvme_allocate_request memset. Since this use
case is not in the primary I/O path, just memset it
in that specific location before using it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife483a4d9c24c033cc7d26d94ec1700905a936f4
Reviewed-on: https://review.gerrithub.io/413153
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rather than storing nvme_payload::type explicitly, use the SGL reset
function pointer as an indicator: if reset_sgl_fn is non-NULL, then the
payload is an SGL type; otherwise it is a contiguous buffer type.
This eliminates the one-byte type member from struct nvme_payload,
making it an even 32 bytes instead of 33, allowing the removal of the
awkward packing inside struct nvme_request.
Change-Id: If2a32437a23fe14eb5287e096ac060067296f1dd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The definitions of these macros will change in an upcoming patch that
modifies the way nvme_payload is laid out.
Change-Id: Ic6edc18928542b07be7519a72bdbf6babbeb0131
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will simplify upcoming patches that change the way nvme_payload
stores its type.
Change-Id: Idf0a5b8dfd7d66a10f89254d2c5c54fee2968a43
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/413173
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is a pair to the following
- subsystem/iscsi: Add set_iscsi_options RPC to set global params
Now options can be loaded from JSON config file.
Change-Id: Ifb68cddbb045d51fbaf8161ad59ede9d399e70cb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410874
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
An new RPC set_iscsi_options allocates and set options dynamically.
Initialization of iSCSI subsystem skips initialization of options
if it is already allocated.
To use and test this RPC easily, add python script too.
Change-Id: I71e252da6495a194ae9a1a9e3aaae4feb543487a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403624
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This got broken in 93cb4a31 [1]
[1] 93cb4a31: event/app: Refactor initialization of app environment
in spdk_app_start()
Change-Id: I9dca9694d50b9132761b57da192ecd1a774337ab
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/413168
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Although contiguous, memory regions may appear as separate
/proc/self/maps entries.
This patch brings support for DPDK 18.05.
Change-Id: I91eb8adc2c073a103f687320ec7b9dabe1e066b3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/413167
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These are trivial to abort: since we just hold on to aer_req until an
event is triggered, we just need to set aer_req back to NULL and
complete the request.
Change-Id: I74ffe7a227fcaf816c0c584fe5c82a940475687f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412881
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is some overhead notified for the message processing,
instead to always send a message to the QoS thread, check
whether the current thread is QoS thread or not. If yes,
queue the IO immediately base on the QoS logic.
Change-Id: I9c1f93aeaf68c9b1a0282c3b690614413949d901
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/413028
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Combine request lookup and abort into a single operation. Keeping them
separate would result in duplicating a lot of logic for finding the
proper list from which to remove aborted requests.
This is still a no-op for now, but it paves the way for aborting
requests that are still queued in software.
Change-Id: If8f268521f2c9f93b413261d87e9f39e539813aa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412880
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reason: If we trigger the spdk_iscsi_conn_migration,
we may face the issue that the io channel of lun
is NULL(which means not allocated). So I think
that if we trigger the migration, we need to
stop the executing the further pdu of this conn
by the current polling group.
Also since the connection is triggered migration,
we should stop execution on the current core, and
let this connection be handled by next round.
Change-Id: I0ab89d79c976f3233890ae25cb7eac98de5e30ac
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/409984
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I12e629d21f30372ae3c0d3939c036b0ae3562e6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412992
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This path works for disconnect events on qpairs at run time.
Disconnects in response to killing the target have
not been worked out yet.
This path does not currently wait for outstanding I/O to
complete.
Change-Id: I8e476c8444b460c18e51601fb950b9132d12f67d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412076
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Number of Namespaces of controller identify structure
defines the maximum number of namespaces supported by
this controller, for physical NVMe controllers, the NN
is a fixed number, while here, we set the same rule for
NVMeoF controllers.
After NVMe driver got namespace notice event, it should
update the namespace identify data structure for NS
attach/detach commands.
Change-Id: Id72a2600a2ce9492fa2d6e09924667acbb77ae43
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fail when number of child requests is >= NVME_MAX_CHILD_REQUESTS.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I8c370053847c9f623b861137da8d2387a66fc030
Reviewed-on: https://review.gerrithub.io/408850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The decoder was still marked as required, so omitting "jsonrpc" version
from the request did not work.
Change-Id: Ied6a8bb1fbbf072c5eff87ed0b343edd7b3702b3
Fixes: aa67900a2e ("jsonrpc: make "jsonrpc" request field optional")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412859
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Per the NVMe specification, NN cannot change while there
are connections present. There was originally a check
for this that was removed in commit 763ab88 to match
the behavior in the Linux kernel. However, after a
discussion with the NVMe specification committee, SPDK
was originally correct.
Change-Id: I42414d1ee0c8c83f3335d8790edbf65d813c5c74
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412544
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe spec says that Identify Namespace should return a zero filled
data structure for namespaces that aren't active, rather than failing
the command with a status code of Invalid Namespace or Format.
Change-Id: Ia9156477d8701694f8b295a67e1669fd09e2cb62
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Prepare to insert ioctl related struct and funcs
into lib/bdev/nvme.
This is the start of one set of patches for nvme
ioctl. More details will be put in Trello:
https://trello.com/c/UYL5vhTN/50-nvme-userioctl
Change-Id: I5fc97230400ecab79f19dac4fb2badfd2d337f6c
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412781
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The patch disables writing dirty bit during blobstore loading.
Instead, dirty bit is written prior to the first metadata update.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7be81009a99f09048bf23749c8f6ef5e9f7b3751
Reviewed-on: https://review.gerrithub.io/410884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
The initiator may close the connection unexpectly
due to many differnent reasons, which should not
print error log of our SPDK iSCSI target.
Change-Id: I652be75c0762547f27212503e5b52bfc898ecc8f
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/412593
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This brings DPDK 18.05 support and introduces
dynamic hugepage memory allocation.
The following is now possible:
./spdk_tgt -s 32
rpc.py construct_malloc_bdev 128 512
or even:
./spdk_tgt -s 0
Note that if no -s param is given, DPDK will still
allocate all available hugepage memory.
This has been tested with DPDK 18.05-rc6.
Fixes#281
Change-Id: Ic9521484c2871eb5b2a56445f1177f305b147707
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/410540
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For some cases, especially for Admin commands, there maybe has
recursive commands, e.g.: in AER callback we may send a new AER
request, in such case, the current code can't process such
case. While here, move the completion queue head to next before
any response callback will fix such issue.
Change-Id: Ide56701d94615881790cf025ede2f07420b9b16e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412766
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Factor out the common pattern of waiting for an internally-submitted
command to complete. This will give us a convenient central place to
add error checking.
Change-Id: I65334d654d294cfb208fc86d16fa387ac5432254
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412545
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Similar to commit 75896c2510 ("bdev/rpc: make get_bdevs/config "name"
params optional"), make "name" fully optional so that specifying an
empty params object works.
Change-Id: Id4703544a32cd3e383a86debf50df1015b58e457
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412295
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will become the public interface for implementing
bdev modules. Right now the file exposes too much of
the guts of the bdev layer to modules, so it needs
to be stripped down.
Change-Id: Ie8b8c3271d51fdb8d0c24a80244b3f3e510c8790
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412297
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As of NVMe 1.3b, there is only one command set. But pipe
this through the driver per-spec anyway.
Change-Id: I4faf8596f5ce638e5e2a500b424e00ceb6e89edc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412102
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Abort is not currently implemented, since spdk_nvmf_qpair_get_request()
always returns NULL, but this will allow it to be implemented in a
thread-safe way.
Change-Id: I6dfd1ee50848deed0f4a2667aad5a811d8dd4ca7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410723
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow multiple independent callers to request I/O statistics
without stepping on each other (previously the stats would be reset on
each request, which only works with a single caller).
This also means that we can now allow requesting stats while the VTune
integration is enabled.
Change-Id: Ia9d4d6fd37fa66b3671cd33b3183c90524f955bd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, lib/Makefile just hard-coded env_dpdk in the list of
directories to build; this won't work if the user has chosen a different
env implementation via CONFIG_ENV (or configure --with-env).
Modify lib/Makefile so that the user can either put their env
implementation directly into SPDK's lib directory (like env_dpdk) or
outside of the SPDK tree (in which case the user must handle building it
before building SPDK).
Change-Id: I77e0611152f97f7bd6efcff10ffadf2fb1b1167e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412248
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When IO is finished SPDK will trigger callback at controller layer,
while here, wrapper the completion callback into a function so
that we can add error injection at this function in following patch.
Change-Id: I7b7a6d278d87fd09a05f51f688398fdf2e9c4e05
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411630
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15d6d89bc6fabd87b458113c777a66e3bf1dcecc
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/408699
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ib999d3f082f5d632cb1aaf089504d0cd48e77539
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/408696
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a new function and its RPC caller. By using it, we can
get the statistics of all the bdevs or the specified bdev.
Meanwhile, with this patch, the open source tool 'sysstat/iostat'
can support for SPDK. The 'iostat' tool can call this function to
get the statistics of all the SPDK managed devices via the rpc
interface.
Change-Id: I135a7bbd49d923014bdf93720f78dd5a588d7afa
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Reviewed-on: https://review.gerrithub.io/393130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
virtio_blk bdevs inherit the name string from their virtio
devices. The string is always freed on virtio device destroy, so
trying to free it as a part of bdev cleanup would always result
in a double free.
Change-Id: I47d20748ec12d9be201b9cd4f72bf89a61e80170
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/412073
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Logical volume store bdevs should report the same buffer alignment
requirements as the base bdev of the logical volume store. For example,
a lvolstore on a Linux AIO bdev should require aligned buffers.
Fixes#307.
Change-Id: I8e40dd428db882d18546caf678d1d4ef4462e2b4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412064
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ie56d5908af306eec75a360a7ce6078ba93bb2f4f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/411746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The whole params object is already optional, but making the parameter
optional as well allows the specification of an empty object for params
to work.
Some JSON-RPC clients make it more difficult to omit the params object
entirely; see issue #303.
Change-Id: If0ac4ebfba33fd2c85f729d2f1109e4d0e47aa3b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/411740
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes a number of things much simpler and eliminates
the need for upcoming proposed reset handling.
Change-Id: I23a6badd0873f6dcf38ba1e55bf18d846c2843df
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407357
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Make sure every event has a handler. No new code
to actually handle events yet.
Change-Id: I4d63898e9bd7fcaa7dc3486c07f42d75b4d48da0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The "jsonrpc" field, per spec, is meant to contain the exact string
"2.0" to indicate the version of the JSON-RPC specification implemented
by the client. We don't do anything useful with this information except
to drop requests for (theoretical) other versions, so it should be safe
to allow the parameter to be optional. If the version is specified, we
will still validate that it is 2.0.
This enables interoperability with a Go JSON-RPC client, as mentioned in
issue #303: https://godoc.org/github.com/mafredri/cdp/rpcc
Change-Id: Ifde32b3f47a5d7942f4ab74b4d6029dd0168efa8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/411742
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the same reason as commit 31bf5d795e ("nvme: make timeout function
per process"), the AER callback also needs to be stored in the
per-process controller data structure.
Change-Id: I41425d81a2ab16c06ef9b900bef6a6128117fcb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410953
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The RDMA transport was not correctly registering new controllers on
creation. RDMA doesn't support multi-process, but it still needs a
single per-process structure for the owning process.
Change-Id: I337ab9d00b468671e7c7a21175682beed4cfdd2e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410958
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The hot remove callback is registered when we open the bdev in the
examine callback, but it's not used just during examine; change the name
of the callback to more accurately reflect what it is for.
Change-Id: Ie3e425e2e512f212d0dea40be12186c00e7a1091
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410943
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To make the reqs recycle more flexible.
Change-Id: Ied37397a10dada22a7aee6bb5a316da6a0583073
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/410866
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The per-process controller data may only be touched while holding the
ctrlr_lock.
Change-Id: I18c8c4e43db4d58e6b86f0c0fd222f6d30830b85
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410952
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7598222db5d76c1a1578fbb5935d4348f7c62f54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410951
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Avoid sending CNS values other than 0 and 1 to controllers with the
Identify CNS quirk added in commit 6442451b10 ("nvme: add a quirk for
identify 0x2").
This probably doesn't affect either of the controllers with the quirk in
practice, since this command is already only sent to controllers that
report NVMe version 1.3 or newer, but let's add the check anyway for
consistency.
Change-Id: I858c28ab7d43714c501dd22d6797259054f0f0a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410941
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Missed to add object_begin to dump for portal group.
key of lun in luns is different between dump and load.
Change-Id: I16b95596478e0e4430c7186aa077bd107e375a93
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was omitted in one of previous commits.
Change-Id: I93ed4bae671bb36bf2b714ff6649b1f33a692647
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/410094
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
iscsi_url is not need after bdev creation. Also implementing get_config
RPC call in next patches is quite problematic as information how bdev is
created using iSCSI URL is lost (eg username).
Change-Id: I8b097617c09bd4636c28531ca20a59919b2b4f84
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/407769
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
We've had cases (especially with vhost) in the past where we have
a valid vaddr but the backing page was not assigned yet. DPDK used
to return 0 as the phys addr in these cases but now it returns
RTE_BAD_IOVA. Unfortunately we don't have any tests currently
in the test pool that hit this condition, but at least one user
has an environment which hits it and this patch fixes their
problem.
Make sure we still work with older versions of DPDK as well.
Fixes issue #260.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie3c0ef54a3e34153bd0850ecfb2be4fcb92455b1
Reviewed-on: https://review.gerrithub.io/410071
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These were marked as deprecated in v18.04 and scheduled for removal in
v18.07.
Change-Id: I2587bcaf89cdcc757ad902ac42ccd9adce9c8f92
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410727
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It doesn't represent an io_channel, so lets
rename it to something less confusing.
Change-Id: I730eb0ff0eb7737a59c190812a25b327ccd8fc14
Suggested-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/409998
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Inflate call can be used on thin provisioned blob or clones.
Function allocates all unallocated clusters on specified blob and:
- For clones, copies data from backing blob.
- For thin provisioned blobs, clusters are zeroed.
After this call all dependency from specified blob is removed
what allows deletion i.e. snapshots.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Ibff569e45b12068b2fb46557156be348b36c252b
Reviewed-on: https://review.gerrithub.io/399367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Passing no flags to spdk_malloc is not a valid usage. Instead,
just call POSIX malloc.
Change-Id: I759e2c0c0befeb4983df953edd1529d6359b4c55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/410479
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
"Dev" was deprecated since v18.01, now we have released v18.04,
so remove the "Dev" support from existing code.
Change-Id: I54c4cf83f78d3b0fdb13e625936c889d7bfaeba9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/409989
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9cfc237a8514a1d323313851e14576ba2ba69077
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/410529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support JSON config/info dump for portal group. These are added to
portal_grp.c. Text config dump is moved to portal_grp.c.
Add accesses to g_spdk_iscsi.pg_head are consolidated into
portal_grp.c to extract pg_head from g_spdk_iscsi.
Change-Id: I8c551b067c68a785eb0c7d83d695bde5f7219c2b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Support JSON config/info dump for initiator group. These are added
to init_grp.c. Text config dump is moved to init_grp.c too.
Add accesses to g_spdk_iscsi.ig_head are consolidated into
init_grp.c to extract ig_head from g_spdk_iscsi.
Change-Id: I88131d248ed13e42e4da56aed8ae0edc01a65715
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will allow us to later quiesce all requests for
a given subsystem.
Change-Id: I50a4df9bf1f65a2fc6668295cf9978d2099f6507
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406450
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The realloc breaks TAILQs inside the structures, which causes
subtle bugs. Instead, statically allocate all of the subsystem
arrays. This sets up the maximum number of subsystems to be
configurable, but does not actually expose it through the
config file yet.
Change-Id: I7347b6002b6babc0678ce59cd218a454fe3a6f88
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/410521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev layer has been recently refactored to share
internal module channels for *all* bdevs of the
same bdev module. This makes us return ENOMEM for I/O
of one bdev if another bdev of the same module (nvme, split, etc)
is entirely saturated. This is not the behavior we want,
as these bdevs may not have anything in common.
This partially reverts commit
e433001 (bdev: Put 3 types of channels in a hierarchy)
Change-Id: Ice0570f92fcaffa6301a282c53eeec8215f354fe
Reported-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/409996
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
We can't split passthru commands, since we don't know how they behave,
so make sure they do not exceed the NVMe controller's declared maximum
data transfer size.
Change-Id: I27845dcb04d98e5d64a93f66731e6ed9db5fbbe7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410519
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I8573732b3049e2a5b471e5a0313e39019fdaad5f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410518
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add base of JSON config fump for iSCSI subsystem in this patch.
JSON config dump for target node is already merged and it is added
to the JSON config dump for iSCSI subsystem first.
Besides, spdk_json_write_named_* APIs are applied to JSON config/info
dump for target node to reduce and clean the code in this patch.
Config dump for global parameters will be handled in different patches.
Change-Id: Iee786fbda3683c75a47c55b16d6db0235ac60896
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/406493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Transport Data Block descriptors aren't actually used by the
RDMA transport, but this function will likely be used by
other transports in the future.
Change-Id: Ic2b6a1f3a86e350c7b7258d75964a38338bdd3b5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409940
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This assignment is converting from the libiscsi sense key enumerated
type to the SPDK one, and clang issues a warning for this case. We know
that these enums are equivalent, so just add a cast to avoid the
warning.
Change-Id: Ie2619b3ddeda46419df1a37755125bfeb6ddf636
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409963
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix the memory leaks when construct the vhost nvme dev
using the error number of io queues.
Change-Id: Ie63e048b355d8a3d602e0da415dca279c0515a8b
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/410547
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Minimizes a future diff.
Change-Id: Ibc68588f3da2a169863d61a3aa20f384fa33e3dc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/409747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Future changes will rely on the ability to atomically
swap this data structure out.
Change-Id: I77b93252df63155692271b5665cc040cb83a33d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/409224
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This clarifies the bdev_io completion callbacks, since they can now
assume that they always have a valid bdev_io. All call sites that
originally passed NULL for bdev_io now set an appropriate status code in
the task and complete it with the new spdk_vhost_nvme_task_complete()
function.
Change-Id: Id74aafb28e83e135bbb0a410ff9766dc1b9ece50
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410080
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Thin provisioned blobs mark unallocated clusters with
cluster ID 0. During recovery from a dirty shutdown,
we must not try to claim cluster 0 - we should ignore
them instead.
Fixes issue #291.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If0dd42416f5de8d9972073bf6ed44eb8bc655415
Reviewed-on: https://review.gerrithub.io/410065
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ic980f3f2f04db61e3ff7ce305817eede7a09cb5a
Signed-off-by: John Meneghini <johnm@netapp.com>
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Reviewed-on: https://review.gerrithub.io/410056
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When executing construct_nvme_bdev RPC method, if the NVMe SSD has
more than 32 namespace in it, then the response is displayed as invalid.
Increased the maximum number of namespaces supported per NVMe device from
32 to 128.
Change-Id: I79491af662b8d2059ad3e0920040a44a82d50064
Signed-off-by: Aneesh Pachilangottil <aneesh.pachilangottil@wdc.com>
Reviewed-on: https://review.gerrithub.io/409926
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Support JSON config/info dump for target node. These are added
to tgt_node.c Text config dump is moved to tgt_node.c too.
All accesses to g_spdk_iscsi.target_head are consolidated into
tgt_node.c to extract target_head from g_spdk_iscsi.
Change-Id: Ibdf57c6ec9457d762c5640483b5810c9a74604ef
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407848
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In JSON-RPC, string is allocated unconditionally in decode operation.
Hence if string is allocated in opts_init(), it will be overwritten without
any notice.
This patch is to keep compatibility to the config file and adjust to the
upcoming JSON-RPC for options initialization.
Change-Id: I6c16f2af7f34d052aabceb5bc4ebe2fc9d82714a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407846
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
In the current implementation, even if global parameters in the config file
are wrong, they are ignored and default values are applied.
Now JSON config file is under development and is a good chance to break with
past and change to reject wrong parameters.
This patch add verify() function into spdk_iscsi_initialize_iscsi_globals().
Besides, this patch fixes the return code of iscsi_initialize_global_params().
Change-Id: I708a1537746fe6ce22c36d1442f7eaf2a201830e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/406021
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently Get/Set features vhost messages use 4096 data buffer, but
it does need this buffer for real usage scenario.
Change-Id: If84f795209d771670449283cef3143f3019baee0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/409613
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously after IO is finished, we will put completion entry and
irq event notice at the same IO completion callback, for performance
consideration, move the irq event routine into IO poller context, this
can be used to implement interrupt coalescing feature in future.
Change-Id: Ic20b50af47b73ffcb91938802e18b316c07a4d11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/408943
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For namespace we need to use array of objects. Remove useless check for
bdev != NULL as this is already guarded by ns_active.
As we are here also switch to new JSON named API.
Change-Id: If8ab15c63ea015731829276e06e5cb5a801620d2
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/409025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
This patch selects part of commit:
adfa9f6dc7
In the previous patch, the failed reason is the logic
that admin qpair actively destroys the ioqpair when
the admin qpair is recevied early. For this part,
we need to investigate it later since for multiple core
usage in our current handling case, we possibly have
admin qpair firstly to enter the destruct phase even if
the initiator sends the I/O qpair deletion first. Thus,
the ioqpair deletion can be recycled twice.
And this patch is selecting the part of the logic:
only to make each ioqpair recycled by its own thread.
Change-Id: Ic9cc3fbdf56fa8a75cb5d12a16ce6c3129220bca
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/409363
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
RPC state of the RPC server, g_rpc_state is set by spdk_rpc_set_state(state).
If the command line option '-w' is specified, g_rpc_state is initialized to
SPDK_RPC_STARTUP. Otherwise, g_rpc_state is initialized to SPDK_RPC_RUNTIME.
When g_rpc_state is initialized to SPDK_RPC_STARTUP, SPDK start RPC server
and wait for start_subsystems_init RPC.
When SPDK receive start_subsystems_init RPC, SPDK start initialization of
subsystems. The RPC waits for completion of initialization of subsystems.
When SPDK completes initialization of subsystems, SPDK change
g_rpc_state to SPDK_RPC_RUNTIME and then start application.
Upcoming new RPCs to initialize options of NVMf-tgt and iSCSI-tgt will be
able to be allowed before start_subsystems_init RPC is called.
Change-Id: I4fa9c22b64e2fdbc9b9fdb2c47f0018f73f84f7e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/406919
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add state_mask to each RPC method and state to RPC server, respectively.
State mask of RPC method is set at registration. State of RPC server
is changed according to the state of the SPDK.
When any RPC method is recieved, if the bit of the RPC server is on in
the state mask of the RPC method, it is allowed. Otherwise, it is
rejected.
When any RPC is rejected by state_mask control, the new error code
is returned to describe the error clearly.
Change-Id: I84e52b8725a286e9329d61c56f498aa2c8664ec1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407397
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
See previous patch for some background.
rte_mempool uses the following formula for its ring allocation size:
```
count = rte_align32pow2(mp->size + 1);
sz = sizeof(struct rte_ring) + count * sizeof(void *);
sz = RTE_ALIGN(sz, RTE_CACHE_LINE_SIZE);
```
With count==262144, rte_mempool was trying to allocate
(2MB + sizeof(struct rte_ring) physically contiguous memory.
Change-Id: I69e8cdcbcaaaa8a053540588afa6eb2fd36c525b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/408926
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This becomes especially useful when accidentally
trying to use vhost-blk socket as a vhost-scsi one.
There's no SCSI/Block identification within the protocol,
so blk messages can be interpreted as scsi ones.
This usually results in a bdev being created with
bs==0 && blocksize==0 and leads to a crash.
Nevertheless, this extra check should be here to protect
against malicious/incomplete vhost-scsi targets crashing
entire initiator apps.
Change-Id: I06cfe3852c35fbd3e6a9f9a337a5abe5febaddf2
Signed-off-by: Dariusz Stojaczyk <darek.stojaczyk@gmail.com>
Reviewed-on: https://review.gerrithub.io/409671
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These won't cover race conditions across threads, but
at least we have something to test the behavior.
Change-Id: I8e620d2076fe7a3d95df668fda4bee49b6d0afa7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/409343
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The following assumes we use env_dpdk underneath.
rte_mempools use rte_rings internally. When creating
a mempool with capacity N, we internally try to create
a ring with least N+1 size. That's because rte_rings
need one extra empty element to differentiate between
the full and empty state. To make it worse, the ring
size has to be a power of two, so rte_mempools use
`rte_align32pow2(mp->size + 1)` for the size calculation.
And rte_ring memory has to be physically contiguous.
Allocating a mempool of capacity 262144 requires at
least (2 * 262144) * sizeof(void *) = 4MB memory. This
made us require at least 2 physically contiguous
2MB hugepages.
Change-Id: Iabc984a29a60c0b2cf5309a78cd1bcce28ac7b3d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/408925
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ioat config's Whitelist is late for DPDK EAL and single application
occupies all IOAT copy engines.
Change-Id: I8749f740ff1bec5bb022b39fc2256880369b467a
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/405911
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will be used later instead of retrieving VS (potentially via a Get
property command for Fabrics) multiple times.
The Active NS List code was previously depending on the VER field of the
Identify Controller data, but this was only added with NVMe 1.2, so we
can't rely on it to detect NVMe 1.1 controllers; it is changed to use
the new cache VS value instead.
Change-Id: Iba9ed5ecbc82b4654973438d119daba0c4cf0724
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In addition to checking for the required version, also use the OAES bits
to determine which features to request.
Change-Id: Idb07e4175cca5609904876bd17d912b50bc6b62a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409352
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This seems to be causing a new intermittent test failure with a call
stack that looks like:
# nvme disconnect -n nqn.2016-06.io.spdk:cnode1
transport.c:175:23: runtime error: member access within misaligned
address 0x000000004321 for type 'const struct spdk_nvmf_transport_ops',
which requires 8 byte alignment
0x000000004321: note: pointer points here
<memory cannot be printed>
#0 0x4e014b in spdk_nvmf_transport_qpair_fini
#1 0x4f14fe in nvmf_qpair_fini
#2 0x502a95 in _spdk_reactor_msg_passed
This reverts commit adfa9f6dc7.
Change-Id: I4bab9d8b5294e241c960683df14acbf457bf3391
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409251
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
