Change-Id: I482ad9e722f6fb775c1c91c8661212250a6914bc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386722
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some devices may report a RTD3E time that is shorter than their actual
shutdown time in practice; force the timeout to be at least 10 seconds
to allow for a reasonable amount of shutdown time.
This doesn't add any extra delay for devices that do complete the
shutdown process within their reported RTD3E time, since we will return
as soon as the device reports that it is finished shutting down.
Change-Id: I365e66ba6a938400be516df170bd3ff288810caf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386719
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) Replace some perror() calls with SPDK_ERRLOG
2) Use spdk_conf_section_get_boolval() to simplify the code
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a6d0773b09ad16ea35cb6d2f18a9e0977dba31c
Reviewed-on: https://review.gerrithub.io/386666
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With the new asynchronous subsystem finish framework, we can
drive shutdown of existing connections as part of the subsystem
finish path instead of a separate spdk_iscsi_shutdown function
called as the shutdown function in response to SIGINT.
This is a step towards enabling a single target app that
supports multiple protocols (i.e. iSCSI + vhost + NVMe-oF).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id9f596a8091912a72ab7eb93cb45a46fdb130a48
Reviewed-on: https://review.gerrithub.io/386695
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
RPC is a default feature required for almost all usages,
so enable RPC by default, but with a UNIX domain socket
for security reasons.
-r can now be used from the command line to specify
an alternative RPC listen address from the default
/var/tmp/spdk.sock.
Remove the Enable parameter from the Rpc config section
but still allow specifying an alternative listen address
using the Listen parameter as an alternative to the
command line option. This keeps backward compatibility
for this release for anyone using the configuration file
still.
Remove the Rpc sections from all configuration files
that were using them, except for those that specified
alternate TCP ports for multi-process test cases. We
can fix these later to use an alternate UNIX domain
socket and to use the command line instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife0d03fcab638c67b659f1eb85348ddc2b55c4c4
Reviewed-on: https://review.gerrithub.io/386561
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a helper function that eliminates a lot of
duplicated code in our target applications, specifically
around common command line argument parsing and usage
messages. This patch only moves the iscsi, nvmf and
vhost targets to use this function, but there are other
test/example applications that could also take advantage
of it to reduce duplicated code and improve consistency.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1903de3daed90ac6282b006a8283b9df07ce37e9
Reviewed-on: https://review.gerrithub.io/386542
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_sock_getaddr() (in lib/net/sock.c) only support IPv4.
Hence IPv6 cannot be used in SPDK iSCSI target.
By adding the code to support IPv6 transparently, IPv6 becomes
available in SPDK iSCSI target.
Change-Id: I236f2c6cb1e61283dde090729fecd8f743cec3fc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/383672
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
cmd and cpl rings must be aligned on page size boundaries.
Change-Id: I103eed32adfaa4388bc7d672ee166973f796b343
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Reviewed-on: https://review.gerrithub.io/383727
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Show total accessible clusters when listing lvol stores
instead of total blocks. This is more readable for user.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I22a14f626816769cf2f494ae30cfd8ee63897771
Reviewed-on: https://review.gerrithub.io/385634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At the moment there was no way to a user of blobstore api to know,
how many clusters are availible to him. Total_clusters describes
number of clusters for metadata and user data.
New field added total_data_clusters, keeping number of clusters
that can be used to create blobs - meaning just user data.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I60555217644557410844f74628375a6b46fd2ac7
Reviewed-on: https://review.gerrithub.io/385633
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows us to remove some duplicated code from our
main target applications.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15b517fd2b58ce682660b4f6ba0b8412beda053b
Reviewed-on: https://review.gerrithub.io/385714
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RPC is core functionality for SPDK applications and should always
be initialized last (after all subsystems have been initialized).
So make RPC a first class citizen and integrate it with the
app framework directly instead of making it an "optional" subsystem.
Then we initializing it after all subsystems have completed
initialization, and tear it down before tearing down subsystems.
We can also do some other cleanup while here - for example, reactors
are already started when spdk_rpc_initialize() is called, so remove
the extra event that was added during initialization since this is no
longer needed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4cc63586a6d55be68786629a2176c61a88979267
Reviewed-on: https://review.gerrithub.io/385914
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is a race condition here, where kernel could have
outstanding I/O to nbd device at the same time we terminate
the nbd application. In this case, we cannot free the
spdk_nbd_disk since it contains the io structure that
will be referenced when the SPDK poller completes one
of those I/O.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1bde240af904957f4d2bfa358dc673105d266986
Reviewed-on: https://review.gerrithub.io/385927
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There may have the situation that associated socket does
not have enough memory for the event pool and the related
ring buffer. As the event pool will be created at any
available socket, this will be same for the ring.
The basic idea is to first allocate the memory for the
core associated socket and then try other available sockects
before terminating.
Change-Id: I52c240289899c136b607629c12c0250ad859c8ac
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/385972
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously lack of support for specific bdev was not known to user.
This impacts all unmap operations, such as initialization of blobstore.
It should be useful to user to know it will take longer
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I89bf3bc0342558fda9a8964fb5cb1daa3a8ed79e
Reviewed-on: https://review.gerrithub.io/385999
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The end goal is to have the application create one poll group per core.
Then each poll group will have a single CQ per network device and an I/O
channel per back-end storage device to poll.
This is just the first step toward that, which is to wire up the
creation of the per-core poll groups in the application.
Note that the app poll groups don't do anything yet. We'll need
additional library API changes to make the library use the existing poll
groups, rather than creating a new poll group per subsystem as we do
right now.
Change-Id: I2d4e2a5e5aa354d37714750f1d5b1d1e4ab9edce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/381887
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a ctrlr is failed to initialize and to respond other
requests, the nvme_ctrlr_fail() will be always called. Add
a log there to have the traddr information so that applications
can know which ctrlr has the problem.
Change-Id: I951062a51349af81a505472f79e3c00a1ead2fbf
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/386189
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
According to the current code, rdma qpair is always created
by the thread on acceptor_core, thus we need to
change the related I/O channel during polling if the core
configured for subsystem is not same with the acceptor core.\
With this patch, we can run NVMe-oF tgt with multiple cores,
and each subsystem can configure different core to handle.
Change-Id: I6163a871f65115e545a4f3fd9cc46b3bafb13249
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/383683
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3db00323c20786713750d13a61b1531d8b1ce7f6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386087
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
During tasting, if bdev is already claimed, we send errors on screen.
This is expected behavior so we should send only debug logs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic5766cfa3aed88099415991998381de69ee8b8b6
Reviewed-on: https://review.gerrithub.io/384229
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ibdfa8be770d7bfcb2baaf29fa5b32dea064ffbd0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/383383
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVMe 1.2 introduced a new Identify Controller field, RTD3E ("RTD3 Entry
Latency"), which allows the device to report the expected time for a
normal shutdown. Use this as the timeout for the shutdown process when
available instead of hard-coding 5 seconds.
Change-Id: I14e7223c81ba397771cf00b49f034f25d21b6e82
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/385301
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_pci_device_claim() can be used to ensure only one process
at a time uses any given PCI device. Previously this was only
used in the bdev_nvme driver - other apps like nvme/perf do
not use spdk_pci_device_claim() and could effectively rip out
the device from a running bdev-based app like the NVMe-oF target.
So instead of modifying all of the nvme apps, put this logic into
the core nvme driver instead so that all applications get the
benefit transparently. Save the fd when the controller is constructed
and then close it when the controller is destructed to handle the
detach (including hotplug) cases.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5dc48a2e41dc06707800f15a9e1f9141477628c6
Reviewed-on: https://review.gerrithub.io/385524
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows users of this interface to then close the fd
when they want to release the claim.
This prepares for calling spdk_pci_device_claim() in the
nvme driver to cover not just the bdev_nvme driver but all
of our nvme example and test applications as well. We'll
want the fd returned so that we can properly close it during
detach (including hotplug) use cases.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b149cc4e778ba31c0e7045b858c8a1561b6b7af
Reviewed-on: https://review.gerrithub.io/385523
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the default config file does not exist, keep the
app's config_file options field as NULL, so that the
app code will not fail when trying to open a non-existent
file.
Also leverage the recent iSCSI and NVMe-oF refactoring,
to just skip trying to read config file parameters if no
config file exists (or the requisite section in the config
file is not present). vhost already handled this so it did
not need to be modified.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic32f0a7a8ce85322a8effd537b62d14732d7b82e
Reviewed-on: https://review.gerrithub.io/385497
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously users would have to pass CHAP and Mutual as
separate words on the DiscoveryAuthMethod line - but
this was problematic since then we would have to check
that the user did not specify Mutual without CHAP.
So instead just make Mutual infer CHAP.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I183d59145abb97198984541157522d6483b18e7c
Reviewed-on: https://review.gerrithub.io/385495
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some invalid parameters would result in an immediate app exit, while
others such as DefaultTime2Wait would adjust an invalid value
rather than causing an app exit.
Instead, be consistent and just ignore any invalid values, with an
error message.
One exception is the CHAP + Mutual check - this will be fixed
in a separate patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I867e4a2a5685aec73df5e556d529b0356a9c3070
Reviewed-on: https://review.gerrithub.io/385494
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move all of the code related to reading global iSCSI
parameters to a new function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iccbb75996b29b0b7a87c602042f13aaf7935d7e1
Reviewed-on: https://review.gerrithub.io/385493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_iscsi_app_read_parameters() does an SPDK_DEBUGLOG
for each of the global parameters - consolidate these
and move them to a separate function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If1543f9f5846420bf75f7a4aebaf540106f1df69
Reviewed-on: https://review.gerrithub.io/385492
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Modify spdk_iscsi_app_read_parameters() so that it sets
up all of the default values first, and then reads the
config file to update any parameters that may have been
specified.
This is in preparation for breaking out the config file
reading into a separate function that can be skipped
if no config file is available. In this case it will just
use the defaults.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0b9026ea87d171be22085a6baca24e2022cb58dd
Reviewed-on: https://review.gerrithub.io/385491
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_iscsi_tgt_node_access() (in lib/iscsi/tgt_node.c) regards
empty netmask of IG as ALL (allow all initiator's IP address).
However any user cannot create IG whose netmask is empty by both
JSON-RPC and config file. Instead user can create IG whose
netmask is ALL.
The code to regard empty netmask of IG as ALL never run in production.
Hence delete the code and add UT to confirm the fix.
Change-Id: Ib7206d0986db9093cfb6b36191be26293ff6c67a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/382920
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Group the code fragments of add/delete name and mask of initiators
and create spdk_iscsi_init_grp_add/delete_initiators/netmasks()
functions. Memory alloc/free is done in these functions.
Change-Id: I40f2873c5336a05813c0e34797c109386eda4229
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381246
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This function is not used and there is already similar one.
Hence delete this function.
Change-Id: Iff290c4762cf5da7211382e367e5b137ab8fbf7d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381245
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
FirstBurstLength, MaxBurstLength and MaxRecvDataSegmentLength
cannot be configured, so there is no need to keep global data
members for these parameters - just use the default #defines
instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4b47e00a5594da8ec0b87192be4a23c4a2145bde
Reviewed-on: https://review.gerrithub.io/385490
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Our iSCSI target does not support disabling InitialR2T,
DataPDUInOrder and DataSequenceInOrder, and will fail
if someone tries to disable them in the config file.
So instead, just do not support these parameters at all.
This simplifies the code and reduces confusion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf1e01a6d12b758404769f77aa3f6221e6e3ee0d
Reviewed-on: https://review.gerrithub.io/385489
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This was not used anywhere - sessions default to
DEFAULT_MAXOUTSTANDINGR2T and never look at the global
MaxOutstandingR2T value.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia4874d8d747063f729061124194b60d15ad3ddac
Reviewed-on: https://review.gerrithub.io/385488
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I2077dab7b343e662bdcfd5681b4850c258f0431f
Reviewed-on: https://review.gerrithub.io/385406
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I65e84971f2d55f27b0c0c1a1b226fc4da4b3cf89
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382763
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Modified the above files to add rpc support to update NVMe firmware. Currently,
the path parameter must be local to the RPC Server.
Change-Id: I2b14e37792a2f0a5759e8b13e21137e7f346e58e
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/369083
Reviewed-by: Paul von Stamwitz <pvonstamwitz@us.fujitsu.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As part of the SCSI target scan, request the Block Thin Provisioning VPD
page to determine if the target device supports Unmap, and report it via
the io_type_supported bdev callback.
Change-Id: Id2fdaf3a2cae72e6356a862d40ff772f9d12d144
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/384131
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
This prepares for adding more steps to the scanning phase. Each step
will put its results into the scan info struct, and the final
alloc_virtio_disk() call will copy the info to the allocated disk at the
end of each target scan.
Change-Id: I836ada42e25c817bb1998328cb592acac25be08d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/384130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ic6770371d9d62cbdd40ae0612eb4f7dceccd507f
Reviewed-on: https://review.gerrithub.io/383771
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ifbb02f99cd2e5752b2bc9091733b87ddadec11a4
Reviewed-on: https://review.gerrithub.io/383895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some devices expect alloc_len
to be the same as payload len.
Kernel vhost-scsi reports:
Expected Transfer Length: 256 does
not match SCSI CDB Length: 255 for
SAM Opcode: 0x12.
Change-Id: I499290c207b77be6757441da002f9fcc9eebcecd
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383779
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Scan requests will be re-sent
if non-critical failure has
happened.
This is actually required, as
some Virtio SCSI devices require
a dummy request to clear it's
POWER ON OCCURED unit attention
status after Virtio device init.
The very first request might fail
with asc = 0x29 (POWER ON, RESET,
OR BUS RESET OCCURED), but
subsequent requests will be
processed correctly.
Change-Id: I809bfe7952062995078f33dccb92192d722e6574
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383689
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1df83cbd6414a1bb8f54328c735950b9476e323b
Reviewed-on: https://review.gerrithub.io/384105
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Virtio spec say that any IRQ requests are only hints. So try to limit
number of interrupts generated by vhost by defining minimum interval
between sending IRQ. Coalescing is disabled by default. Can be enabled
using RPC command 'set_vhost_controller_coalescing'.
Change-Id: I9b96014d004ea0ea022b4498c6b47d30d867091a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/378130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
