Typo caused lvol blk test to not run.
Change-Id: I1e26b96757450a3ea860e0b74a0b7d976c86bdf2
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/388413
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Removing norandommap as it is not correct to use with
verify-enabled tests
From fio man:
Normally fio will cover every block of the file when doing
random I/O. If this parameter is given, a new offset will be
chosen without looking at past I/O history.
This parameter is mutually exclusive with verify.
Change-Id: I739642461b3dbe9ab8698836aa120bfb14c2b79e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/385431
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
qemu_build_and_install and spdk_build_and_install are unused for long
time so lets remove them.
As we are here also also remove unused VM_CNT.
Change-Id: I23368b2f2036b9eb82f9ac8e6880242748352e49
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/387560
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fix indentations, rework help message, parametrize VM image.
Change-Id: I4a24c840ae2fec1e77c0e53e2ef6dc227272744b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/387138
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RPC is a default feature required for almost all usages,
so enable RPC by default, but with a UNIX domain socket
for security reasons.
-r can now be used from the command line to specify
an alternative RPC listen address from the default
/var/tmp/spdk.sock.
Remove the Enable parameter from the Rpc config section
but still allow specifying an alternative listen address
using the Listen parameter as an alternative to the
command line option. This keeps backward compatibility
for this release for anyone using the configuration file
still.
Remove the Rpc sections from all configuration files
that were using them, except for those that specified
alternate TCP ports for multi-process test cases. We
can fix these later to use an alternate UNIX domain
socket and to use the command line instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife0d03fcab638c67b659f1eb85348ddc2b55c4c4
Reviewed-on: https://review.gerrithub.io/386561
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ic6770371d9d62cbdd40ae0612eb4f7dceccd507f
Reviewed-on: https://review.gerrithub.io/383771
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In case of error the message is command output and is confusing:
ERROR! While executing FIO jobs - RC: 1, Err message:
hostname=VM-11-0xC0000000, be=0, 64-bit, os=Linux, arch=x86-64,
fio=fio-2.2.10, flags=1
19:04:59 hostname=VM-10-0x30000000, be=0, 64-bit, os=Linux,
arch=x86-64, fio=fio-2.2.10, flags=1
So change this to always print command output then error message.
Change-Id: Iee4b25a00438c153a0d4d250ae43fc0d283faf33
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/383596
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change is needed because fio job (trim_write_read)
submits unmap first and then write,
but sometimes write finishes before unmap.
It casues that write fails with verification.
Nvm Express 1.3:
"The controller fetches SQ entries in order from the Submission Queue,
however, it may then execute those commands in any order. "
Change-Id: Ia399e5677051c2e2077fe3082ede846a8ac9dd49
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/383436
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Removing read and randread from test runs as read operations are
performed as part of write with verify enabled tests.
Slight code cleanup included.
Change-Id: Ia3b92ed16cf4c1b873d0f54a0c0677c52f9b726a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/383770
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Test plan for hot-attach and hot-detach included.
File with CPU core masks for vhost and qemu updated because more
than one virtual machine is needed to run the tests.
Change-Id: I6ba02f65398d09e2ef3335c2d5b0d6c04d3e393c
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/372268
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Virtqueues now have to be "acquired"
by a logical CPU core in order to
perform any traffic on them. The
acquire mechanism is thread-safe to
prevent two reactors accessing the
same virtqueue at the same time.
For now a single virtqueue
may be used by only one io_channel.
Support for shared virtqueues will
be implemented in future.
Added new param "Queues" to the
virtio config file for VirtioUser
bdevs. VirtioPci will use the
max available queues num -
negotiated during QEMU startup.
Change-Id: I3fd4b9d8c470f26ca9b84838b3c64de6f9e48300
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377337
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is required for adding
optional params for vdevs.
Since virtio-initiator README.md
had to be changed, some outdated
entries from TODO section has
been removed as a part of this
patch as well.
Change-Id: I472a966d8e4166305fb19ad3ab20e53289a1e071
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382347
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add possibility to attach lvol bdevs to controllers running
on varying CPU cores
Change-Id: I8d9eec854b2d0ee6c3b8863cefe30d24de138d40
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/380441
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now that the bdev layer handles ENOMEM errors internally, we can restore
the original fio queue depths that were reduced to avoid test pool
failures.
This reverts commit 26a40ff914aa90f307aab61b26748da97835bb9d.
Change-Id: Ib7f1bd1e0251f4b2a6370cfd84e2f60e8ee15428
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/380855
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
replaced "remove_vhost_scsi_controller" and "remove_vhost_blk_controller"
with "remove_vhost_controller".
Change-Id: I6f4b180054c13f25aae992e9be50375d3750a376
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/377197
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Devices can be added to a SCSI
vhost controller at any time now.
Change-Id: Ic5dd4b78465d3431479e0389b7ea902e1e25c337
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371281
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since we are calling eventq_enqueue only from inside of the controller
reactor, such ring is not needed. Eventq events will now be sent
immediately. This simplifies the whole process greatly.
The abstract vhost event layer is being replaced with much simpler and
less error-prone vhost external spdk_event API.
This reverts commit 542b5415 [1] together with vhost scsi device
hot-attach feature. Hot-attach shall be reintroduced in upcoming
patches.
[1] 542b54158886 ("vhost_scsi: implemented abstract vhost event layer")
Change-Id: I39a427332d573c4e0be548d1c8caf0cf2858f6a5
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371117
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Script for testing vhost using lvols as backends for
virtual machines. Option for using nested lvol stores and
nested lvol bdevs also provided.
Change-Id: Iad8a196c97f292881a8b424b4433ec281f12aec6
Signed-off-by: Lukasz <lukaszx.galka@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/365798
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Temporarily lower iodepth to avoid random test pool
failures while running vhost blk fio tests.
Reenable old iodepth value once 'too high' vhost blk performance
is solved.
Change-Id: I385ff3151b4433b331807be6ce0f3103980bae7c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/377697
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is still causing a lot of random failures in the test
pool. Disable this for now. There are a series of patches
coming up which will improve reset handling significantly -
let's wait to re-enable this until that is in place.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If811fcffa530954857cbb14f0326a53ee462d8c8
Reviewed-on: https://review.gerrithub.io/375651
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move files from test/vhost/fiotest to test/vhost/common.
Scripts and functions from fio tests will be re-used in
any new test scripts.
Change-Id: I2423d636d41dcb2b2af12987769961607e969392
Signed-off-by: Lukasz Galka <lukaszx.galka@intel.com>
Reviewed-on: https://review.gerrithub.io/372545
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Updates for running with vhost-blk.
Removed checking & cloning Qemu sources - should be
already installed in working directory.
Some other minor fixes for typos.
Change-Id: Ifd790a301c8ca1e19434f03ba32f5eb916dbe0a6
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/373897
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add num_queues for vhost-user-blk-pci to use multiqueue.
Change-Id: Id0ddf234d936c7c31da0c3ee47a7220b2e0044bc
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/373483
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Default configuration job for FIO integrity test uses block size 4k.
This patch changes it to 4k-512k for better bs coverage.
Change-Id: Ib31b9c663288b5fa9226dd429458ae0fe8ba9209
Signed-off-by: Lukasz Galka <lukaszx.galka@intel.com>
Reviewed-on: https://review.gerrithub.io/372081
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Change-Id: I321546e27d217544cb97c694c8471a3eb05e15e6
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/368639
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implemented abstract vhost event layer on top of virtio eventq.
This allows us to defer virtio-event-related actions to be called from
the vhost poller thread. This is required for hot-attach, for which
io_channels have to be created on the I/O thread.
This adds full support for hot-attaching and hot-detaching vhost scsi
devices. They can be now attached to a controller via RPC at any time.
Change-Id: Icf353bfcf69c83ef16b8fc771ea4c487002094f9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/370016
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also restoring vhost block tests in autotest.
Change-Id: Idc6a3068650ce28636f4709df5a51029bfddbcdd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/369470
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Look for open RPC port instead of issuing "sleep" for a
number of seconds.
Change-Id: Id75476ae3d6c39de7f7da2c0878d251384c2bb65
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/364974
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow running VMs in fio tests with vhost-block instead of
vhost-scsi.
Change-Id: I89ee437264ddcda0aaefdb71744cee6ce7d451d8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/365808
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Always use "Local7" internally. We want the log API
to be generic instead of syslog specific.
Change-Id: I021f719e90c236f123fa1cadebc0c199b87ba077
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365295
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change killing VMs with SIGKILL to proper shutdown.
Change-Id: I3547f1b57e33dc5ecd7613d7600e9feeadd44283
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/366087
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This reverts commit 28db2ce0820a28be45170206b2477ec2d994e8be.
Even with latest changes, there are still some intermittent
failures in the CI test pool.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I16649fe8e161dc7791fe9e79c48ebe1806f61d5f
Reviewed-on: https://review.gerrithub.io/365873
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Recent commits have drastically improved the reset handling
for cases where multiple bdevs are muxed onto a lower bdev
(i.e. split module on top of nvme).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibf2d2121bb91054868359f0dc2d6b609a357c6c0
Reviewed-on: https://review.gerrithub.io/365715
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These tests are failing intermittently. Removing these
for now while we continue to debug.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ida55e0a8e475c9f1b5f30865f37f7d680e3e194f
Reviewed-on: https://review.gerrithub.io/365496
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added new rpc commands together with underlying vhost API and tests.
Change-Id: Ib9c6a530d0909193ea5115aaac4920c44f39613c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Added 1 minute timeout for vhost to exit after receiving
INT signal. After timeout send KILL signal to vhost app
and exit with error.
Change-Id: Ib1659660667991b21103b3401bbd780290521433
Signed-off-by: Karol Latecki <karolx.latecki@intel.com>
Convert autotest.config to a sourceable file. This enables direct or
indirect usage of variables and a chance to remove error prone
statements like '$(cat | grep | awk')'
Change-Id: I3ae4152fd7548e4b2bfd01c00b614155871b2db3
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Setting max_sectors_kb to 4k was workaround and is no longer needed.
Vhost must work with arbitrary guest settings.
Change-Id: I9ff9d752916e200e79cdd2b4b3d64afdecae11bc
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Core dumps stop working if the path is longer than 64 bytes.
Use readlink to shorten some of the very long relative paths.
Change-Id: I5e7eb6580ca581c5ac3a71afb7b62953836e2660
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch removes comments within configuration files for tests
that are not relevant to the test itself.
It reduces the need to update comments in test config files with each update.
As well it makes those same as other test configuration files.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I48116613435fadf0738b5a948d32f458c7ce06be
This fixes multiple SCSI reset issue.
This patch does not remove sleep in iSCSI tests.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I5e9f3705e5dc34004b9d1b9e40fbdcb04a3bee4e
