All of our Makefiles duplicate huge lists of libraries
in SPDK_LIB_LIST. We have a very precise and accurate
accounting of the library dependencies in
mk/spdk.lib_deps.mk which can be used to generate
the full list if the app specifies the modules and
subsystem libraries it wishes to link.
I did a first pass through all of the existing
Makefiles to take advantage of this new functionality.
There may be more optimizations we can make later but
don't want to hold up this patch for all of them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icdaf6f749a6908df2c2ce2db22631a4af4ff3a9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5553
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to support ABI compatability issue for spdk_app_opts.
Fixes#1484
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6fed777fa15b367f7c3706b8f218d86d56493906
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5330
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
In the case of handling shutdown signal, a self defined
shutdown function is needed to properly handle the cleanup.
This is to fix below issue:
https://github.com/spdk/spdk/issues/1612
Change-Id: I9e1645980bd4b1340667745eec9ff0f3e7a025c6
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4569
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We have some RPCs defined in the bdev library itself,
others in a separate bdev_rpc library. There's no need
for the separate library - just move them all into the
bdev library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I298eedb88924197e64eb315369efb10f402903a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4364
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to have the application-level RPCs
defined separately from the event library itself
(which defines the application framework).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic264ed761f5ec1a40d604e63395c5740af4be1a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When the block size is 520(512 + 8) Bytes, we should check the data
length before the tests.
Change-Id: I785e395c9427460238205a52220e8333eee99ec0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2905
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch adds test for compare-and-write fused
command. First it runs successful call of compare
and write command and then it runs again and the
second run is expected to fail.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iaf1151414c4dea16487e8c33630cbffb0c09ae3b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482606
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdevio test tool is not critical but change it to use instance
of cpuset to spread statically allocation of cpuset throughout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9722d491cb6ec3202312285013105f7b6aeb1f15
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This change allows setting of the NVMe completion queue
CDW0 in spdk_bdev_io_complete_nvme_status.
Before that change, handling of vendor specific NVMe IO
commands was limited since there wasn't a way to return
command specific info back to the initiator.
Change-Id: I250d5df3bd1e62ddb89a011503d42bd4c8390f9b
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470678
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
No longer use the event system.
Change-Id: Ib75d17e481f3421859142a4cee4b5881570e8582
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468388
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
After recent changes, that function can not return
NULL anymore, so remove all redundant checks from
various SPDK libraries.
Change-Id: If80344b6fa81ad5f87a7086804dba221522cd7e2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The test.py script relies upon importing SPDK Python RPC libs.
This requires user to add ./spdk/scripts/ to PYTHONPATH.
Unfortunately --help could not be reached when the import failed,
to user executing the script directly wouldn't know that.
This patch adds instructions for user when importing
RPC lib fails.
Change-Id: Icb87fbc5ae9d1c5b71699827d6ea0cd922d38627
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460908
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I303ff9b4eecba1b7778d94416d19b8f8ca26297e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
VMD section with Enable flag set to true
need to be defined in config file to
enumerate devices behind VMD.
Change-Id: I009926f41465298e3072a3cca1452e9808095c9b
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459764
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously RPC returned just number of cases that failed,
meanwhile return from the command was 0.
Now whenever there are failures, error is reported via RPC.
This will allow to use it in bash scripts with set -e used.
Change-Id: I34997dd5f08b561bc55f391287f9942861bda57a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457614
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test sends identify controller command to the NVMe device.
Change-Id: Icc262a1a1fa52bafe5cb019151c3d196bd268673
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454609
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New RPC added specifically to the bdevio app.
It will launch all tests on all targets by default.
When optional parameter for bdev name provided is supplied
tests will be ran against just that bdev.
After finishing, the application will await another RPC.
stop_init_thread() and __run_ut_thread now pass json request.
Added separate test.py to not pollute rpc.py with custom RPC
just for the bdevio application.
Added '-w' argument to the bdevio app, so that instead
of performing the tests immidietly - it awaits RPC.
After a lot of changes to blockdev.sh, we might end up
removing this argument and just use it as default.
Change-Id: I82e52352bdf8082c1712caa223ad5ab78aa4e7fa
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455200
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Before simplifying test suite execution it was needed
to loop around function actually running the tests.
So the test functions now can directly contain whatever
that was doing, without intermidiate function between.
Change-Id: Ic4b648d8d26d6be7a3bf1efb1b1ee3f2615ee5fa
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
With this patch each target has separate suite,
tests are ran just once for all setup suites.
Suite init/fini functions were added that move
current g_current_io_target ahead for next suite.
Results what works for particular bdev are of more use
rather than combination for all bdevs.
This will come useful when we want to perform RPC for only
select targets.
In case of CUnit library error, application is stopped without
returning number of failures. This is because at that point
its numbers are not reliable.
Change-Id: Ie82b6e33374841bf829da09a16a401fddd1fd81c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Previously it was explcitly set to NULL, so that
the application didn't even setup up the socket.
Change-Id: I2174fe0ff5790efd6578807f17702978cd9cf451
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Adding app_rpc and bdev_rpc allowing every kind of RPC
interaction with the app.
Change-Id: I738095686dc8ad61101a998b473df63cddc490a2
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455196
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Adding ability to create targets from single bdev,
will allow to create set of targets (not all) to run tests.
Idea is for bdevio to no longer run tests on all bdevs and
shutdown right after. Rather await RPC for configuring bdevs
then start test suite on select targets via RPC.
This is first patch in that direction.
Change-Id: I8645a3c22150e8611ff8a59f740e2ebf4edb4c1f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tests shouldn't report success when no actual tests were ran.
Using bdevio without any bdevs configured, does not serve
any purpose and should report failure.
Change-Id: I489a0d03f5b5c2482dede56cad92befd97d24057
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This makes sure we do some I/O after the reset.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5378df76fcd99ab9fed674550999c39d644069f5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMe-oF target doesn't support reset yet - but we want
to use bdevio to test other NVMe-oF target functionality
in the next patch.
An issue will be filed against the reset support so
that it gets added.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I84b2be9268a344ee9e613a39487345dc1b8187bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This sends a known invalid opcode. This is useful
for NVMe-oF target testing, since the target will
decode READ and WRITE opcodes and we want to exercise
its passthrough code path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I82e16955f4965224e51c1617dbb2b9e5cc48f36d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This uses the bdev nvme passthrough API to do a write
followed by a read, checking for final data integrity.
It helps verify the passthrough API is working correctly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I25fe685b0bdcb88c7537c165cc60f8df31823b24
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452931
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds library that will provide ability to notify about
events. On one side each spdk library can specify what kind of
notification it can produce and on the other side libraries can fetch
those notifications.
Example is bdev module, which lib notify about added or removed bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Change-Id: Ia95e564a8a43400b2745d9de8217b9cc84cd1b16
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This callback type takes 1 argument instead of 2.
Change-Id: Ic3710fafb2828f08fc064f7658849b3d20521092
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We never used this anywhere, and I need to move to a model where
the start up action is a thread message instead
Change-Id: I6b21ba9afb93a3245aceca2fe24713ffd16d0933
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446986
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This utility used to be called "bdevtest" so that's
what opts.name was set to for spdk_app_opts_init().
Change it to the new name "bdevio".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8e6614c6fe82651952f46ec56de14ef0a8961f0
Reviewed-on: https://review.gerrithub.io/c/445800
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Need to check user input and return status of parsing
to prevent app or target from crashing.
Input checking function will be added in the future.
Change-Id: I8167ac13306ae4f81e2cacb80edd9dcf9382c374
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This removes a ton of duplicate from a lot of
Makefiles. Note that spdk.unittest.mk still keeps
its own app rules, and now just includes
spdk.app_vars.mk instead. Fixing Makefiles that
include this .mk file requires more work that is
deferred for now. We do need to add the
"install: all" rule explicitly to this .mk files.
Note that Makefiles need to include spdk.app.mk
now at the end of the file, so that things like
APP and SPDK_LIB_LIST are defined before including
it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If6823cda135180c37690ffc96c91660b7f0718e3
Reviewed-on: https://review.gerrithub.io/434283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Application Makefiles can now just add xx_MODULES_LIB_LIST
to SPDK_LIB_LIST. This is possible now since all
SPDK libraries are linked with --whole-archive, so there
is no need to differentiate between "modules" libraries
and other SPDK libraries.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iabf81a388b72d3b2a2f48287a8491ddc977722ac
Reviewed-on: https://review.gerrithub.io/434277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows a lot of simplification to SPDK application
makefiles.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5fa463f6369834b84a8d92e79fa7768082209d7a
Reviewed-on: https://review.gerrithub.io/434274
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows us to remove $(ENV_LINKER_ARGS) from all of the
application Makefiles.
Modify spdk.unittest.mk to explicitly set ENV_LINKER_ARGS
to nothing, to avoid DPDK libraries from getting linked
into unit tests. This seems better than creating separate
LINK_C rules for unit tests. Provide a UNIT_TEST_LINK_ENV
flag to allow select unit tests to override this behavior -
it's needed for some of the env unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I647f2c848cf434023cf5a1f3a45869bbc4fc8102
Reviewed-on: https://review.gerrithub.io/434145
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The various *_MODULES_LIST are intended for the modules
that implement the specific interface - not for the
associated core library itself.
For example, BLOCKDEV_MODULES_LIST doesn't contain bdev,
it contains all of the bdev modules. Similar for
COPY_MODULES_LIST and copy.
So make SOCK_MODULES_LIST consistent. This is a real
pain because we have to add sock explicitly to a bunch
of individual Makefiles, but I have plans to clean that
up in some future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0d293372cfb38bfa46c8478a8d9ca9ce23924747
Reviewed-on: https://review.gerrithub.io/434125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The memory restrictions were causing issues with allocating crypto bdev
qpairs when using qat.
Change-Id: I1e8a9799006293cb54f8959cfd24e38c4dee6d0f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430104
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Config file pathnames have been possible on the command line
for a very long time, and all of the SPDK testing infrastructure
uses it. The default pathnames were added a very long time ago,
and now can cause weird issues like conflicting with --wait-for-rpc
when an INI config file is not passed on the command line but is
pulled in by the default pathname instead.
So remove the default pathnames.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia914ff1c9321235f79f8cc9a054ed7f099340151
Reviewed-on: https://review.gerrithub.io/424606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes us exit immediately on '-h' or any parsing error.
Change-Id: I6bd2fc9238bcecba6df1e62a8db42ce79ad73524
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The config now has to be provided with '-c' or '--config' param.
Change-Id: I999c84d899b1e15cd4f34120016f6a18fc0e84c9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In order to allow specifying a custom cpumask
we have to prepare the environment a bit.
Change-Id: I45d2c960c05c7583cc2781c985760813ef1f2b77
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Daisuke Aoyama originally contributed to istgt, the
iSCSI target in FreeBSD. The SPDK iSCSI code is
originally derived from that. Due to copy and paste,
some incorrect copyright attributions have been added
to other files that do not derive from istgt, so
this patch removes those.
It is doubtful, at this point, that there is any code
whatsoever that remains from the original istgt, but
we can revisit that at a later time.
Change-Id: I207e1e6b99d271e2f12690be90a96f7d0c113af7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This will be necessary when the NVMe/TCP transport is added, which will
use the sock abstraction library.
Change-Id: I6561ccdad1ff575db2afa418eab2f2cd24806cb9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416477
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
