Implemented eventq rescan message.
When the host hot-attaches a target
to the controller, it will now
automatically appear as a virtio bdev.
Change-Id: Ie81352b70808a0e078009f618cc1fcfed407d1ba
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392374
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A public API to remove a virtio
controller is about to be published
soon. Hence, we need to cover all
possible corner-cases where calling
it could cause a segfault.
Change-Id: I804cc0bee4a60ab8fc159bb98b7712cc258117f3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392271
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The upcoming rescan implementation will
do scan I/O on existing I/O virtqueues.
To handle scan cleanly, we need to queue
scan I/O if virtqueues are full.
The heuristics for resending I/O should
be sufficient for all real case scenarios.
A scan I/O consists of either 2 or 3 iovs.
A raw I/O consists of at least 2
descriptors. Since most I/O requests
contain some additional payload, in 99%
of cases the scan I/O will be successfully
resent after polling a single I/O response.
To handle the remaining 1%, we try to
resend a scan I/O up to SCAN_REQUEST_RETRIES
(currently = 5) times.
Change-Id: I8c84ed1d109d9f403c9d7b8efabb904eb26183db
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SCSI doesn't specify any payload associated
with TEST_UNIT_READY and START_STOP_UNIT
commands. Sending a payload didn't cause
any troubles so far, but still it's not SCSI
compliant and hence has been removed.
It is now assumed that iov_len of 0 means
that no payload should be sent.
Change-Id: Ibdfa7cd77af6049132278911d872cd52c10be6c7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391868
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
scan_finish function will now unconditionally
finish the scan, while scan_next will continue
scanning on the next target.
Now that target scan be aborted from external
sources (device removal during re-scan). There
is simply a need for such scan_finish function.
Change-Id: I49e0dd6ea7abdddc24c23af362313d657fe1dc66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391866
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We used to defer registering bdevs when
a target scan was in progress, as bdev examine
(gpt) would do an I/O that could be polled by
the scan poller and parsed as a scan I/O response.
This limitation has been removed a long time
ago. Scan I/O can go alongside default I/O and
bdevs can now be registered at runtime.
Change-Id: I949c57acbfe23a7246de90e90ce58ea007be947e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391865
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Eventq is a special virtqueue. The driver
(e.g. SPDK virtio) enqueues some fixed
amount of write-only requests. The host
device completes them only when it has
something to tell us - like a device
hotremove. After we receive the response,
containing full event details, we schedule
proper action and re-enqueue the event to
be used later by the host as another event.
Change-Id: I0516b161d8d4a49490b909fa2a454c9c9fa517f2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390115
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previous descriptor chain was being corrupted
by setting invalid vq->req_end (virtio.c:538).
Change-Id: I4b27db02dc990e6af011a1b614e30e3050379e9f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392774
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove unused macro constants of iSCSI.
MAX_PORTAL, MAX_INITIATOR, MAX_NETMASK are still used to determine
buffer size for JSON-RPC and iSCSI.conf and are not removed in
this patch yet.
Change-Id: I3036dc472eca09eff7fa3f6ea7e8e28b0978358f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392912
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A few previous changes replaced ALL by ANY for the initiator group
because ANY was normal for this case. ANY was tested enough for
the initiator name of the initiator group but not tested for
the netmask of the initiator group.
Hence the previous changes caused degradation.
This is the bug fix and UT code is added together.
Change-Id: Idf7642dd4c111a4788aca31a0105b3497631aecd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392923
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When receving ctrlr+c event, NVMe-oF target
could in any state. So we cannot guarantee
g_acceptor_poller is initialized or not. If
we do not handle such case, ctrlr+c will
trigger unexpected coredump issue. To
solve this issue, following methods are used.
Currently, our code in event module (lib/event/app.c)
can only receive ctrlr + c command once, so
when we receive the ctrlr+c, we should complete
the shutdown process.
The idea is to use spdk_event_call, we will only
enter shutdown process if tgt is in NVMF_TGT_RUNNING
status.
After several patch tries, I think that this solution
is much simple. Though we would like to kill after
entering the running state, it may wait some time
if users kill the application in early state, but those
operations will not be quite often in real case.
Change-Id: Id89a96b5d39f8a528e72dea8c0eb6524bdaf7ee4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/389433
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Exported lib/bdev/rte_virtio as a separate
library not dependent on bdev.
Virtio is now accessible via spdk_internal/virtio.h.
The header is marked `internal`, as it's
not meant to be used by end users. It's
not handy to handle all backend-specific
(e.g. Virtio-SCSI) logic in a user code.
For now the Virtio interface is publicly
exposed only via bdev_virtio module. We
might want to consider adding a separate,
public Virtio-SCSI library in the future.
Note: this patch doesn't do any changes
to the virtio code. Everything is
moved 1:1.
Change-Id: I805e5d12d265d82b0bc5784c89fbadb81abdb278
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388166
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At present, close(dev_fd) is always executed before the
return of ioctl(nbd->dev_fd, NBD_DO_IT). So when executing
these 2 ioctl commands, dev_fd is already closed.
Change-Id: I6fce73c440972af91f662f24c1fbca51a7b95d61
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Current relative work dir path caused problems with downstream
test scripts when running spdk_vhost.sh using relative path
Change-Id: Ifd47bd37650a6328cb0f548a03cb4de010093320
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392744
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Some functions should be static.
2 For the unused API, we delete them first. When it is used, we should add
them back.
Change-Id: I2c39e8bef96155fc71801c76534955d9cf6cb0bd
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392721
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
No need to export this function, since it is only
used in lib/iscsi.c
Change-Id: Ib5fc3d54e45d0b5696413788a6a98278e9c2dfef
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392716
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reason: It only handles the queue datain tasks. After the changing,
it would be more accurate for the code reading.
Change-Id: I87999f811810cadd4b58d99be1cdeba0a1a7503f
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392719
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Also use this function in iscsi/conn.c
Change-Id: I25f6da175eddb12c4ac2624d695c2c43c871d8e8
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392713
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tests need adjustments due to patch:
https://review.gerrithub.io/#/c/392587/
Change-Id: I098aca99fe22a9e01246da74b4b9fbf25f4b5b99
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392745
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I1370df82b259afd9f3fcc2c37409e20fd35dff5f
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/392497
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We can now proudly say that rte_virtio
doesn't contain SCSI references anymore.
Change-Id: Id814de255d8715af03c68a237923432f1e4fe2e1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392628
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This mimics the per-lcore cache that the DPDK rte_mempool
implements. But DPDK rte_mempool relies on the DPDK
lcore_ids which are not set for non-DPDK threads (such as
the fio bdev plugin).
So implement our own per-thread bdev_io cache instead.
This is quite simple since we already have a per-thread
bdev channel called spdk_bdev_mgmt_channel.
Previously, we passed 64 to spdk_mempool for the
per-core cache size. This patch effectively changes it
to 256 and moves it from the spdk_mempool (which we now
specify with a per-core cache size of 0) to this internal
bdev cache. We allocate 64K of these bdev_io, so putting
a few more in each thread's cache will not hurt anything.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e715f8c69b99130c7b80347b47a881595d184ae
Reviewed-on: https://review.gerrithub.io/392531
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ibd3e485085793260ca4bb2bfa3da6025b2c997aa
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392450
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The latest change for the portal group is applied to the vhost.
The following comment is quoted from it.
Currently the cpumask must be a subset of the reactor mask.
However, this is different from sched_setaffinity() function
and taskset command of FreeBSD and Linux. The latter will
be familier for more people. Hence the later is adopted.
The following is quoted from the FreeBSD Man Page of taskset:
The CPU affinity is represented as a bitmask, with the lowest
order bit corresponding to the first logical CPU and the
highest order bit corresponding to the last logical CPU.
Not all CPUs may exist on a given system but a mask may specify
more CPUs than are present.
A retrieved mask will reflect only the bits that correspond to
CPUs physically on the system.
If an invalid mask is given (i.e., one that corresponds to no
valid CPUs on the current system) an error is returned.
The masks are typically given in hexadecimal.
Change-Id: Idcd72a12ef52e4ccec8476e7d54fab82867cf936
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392587
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
vhost supports only Linux, so there's no
need to check OS inside vhost Makefiles.
Change-Id: Ia7129200ee4cb8db898552a8a990f6fab84f8711
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392671
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During hot remove of lvol store some lvols can already be in a process
of removal. We should not start another removal process for lvol that
is already being removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ifc91e4cee11ee63af04eac3729d014d7c04ff98b
Reviewed-on: https://review.gerrithub.io/390217
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Instead of requiring each bdev module to track its own bdevs and clean
them up during its fini callback, we can walk the list of registered bdevs
during spdk_bdev_finish() and call spdk_bdev_unregister() on each one of
them before cleaning up the bdev modules.
Change-Id: I01816707c9100f66f542bfd73b90bcb0e0fb0c0c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I667df64dd2363c606f39b52c0411c6ba7f55d5ba
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391370
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Commit ID "269910c0" removed the support of separate metadata,
for those controllers which can support this feature, SPDK driver
can't be used. SPDK provides APIs such as:
spdk_nvme_ctrlr_cmd_io_raw_with_md/spdk_nvme_ns_cmd_write_with_md/
spdk_nvme_ns_cmd_read_with_md, which can support separate metadata.
While here, re-enable this feature with this commit.
Change-Id: If77c21e9ac700c4b334548ebfa7e8e6286285a64
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/392440
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This can be used for two purposes:
1) more quickly iterate the blob list, avoiding
metadata pages that are valid but not the first
page in the blob's metadata list
2) close races between delete and open operations -
now we can clear the bit in the blobid bit array
when the delete operation is in progress, ensuring
no one else can try to open the blob
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3904648fd6fa656cb98c9e17ea763ed5a84ef537
Reviewed-on: https://review.gerrithub.io/391695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Number of susbystems for test on physical server increased.
Due to SoftRoce limitations number of subsystems is not
increased for VM tests.
Change-Id: I6875204238f55f4bc4a819512ee0fd6a46c44fee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/380459
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SoftRoce does not implement enough queues
for multiconnection tests and cause test pool failures.
In case interface used for test is software
emulated - reduce number of NVMf subsystems in test.
Change-Id: I52cc78015e72603c487a5774b91c6bd4523326b0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392357
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To avoid overflow, if the passed value is too
big.
Change-Id: I59d31c0baa742cab14e22dcd88a61cb5adca247a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392579
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No need to export these functions since they are not
used by other files.
Change-Id: Iab5d44667cc0d57ec105e90a71d434cc4e07f4f5
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392590
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For g_num_connections, we should create an proper
array size, we cannot directly create it by the size:
spdk_env_get_core_count(). The reason is that the
core mask can be non-continuous,e.g., 0x1001, thus
for effient access, we create a large array size with
last_core +1, although we will have some space waste,
but this will not be big, but still maintain the fast
array index acccess.
Change-Id: I95e1fc34e0816ac2f8764880c0d0e629f43a5dc4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/391909
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was removed some time ago.
Change-Id: I5e4b588fb881793d750999ff73e8bf891cb58fc0
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/391952
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make shell scripts prepare fio jobs and just call run_fio.py to run
those jobs. This way run_fio.py don't need to know anything about test
environment configuration.
Change-Id: I10b6954011855e9139ff7b5372070ec553009d33
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/391929
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iedfa8d3de8520836e184f7ef0925822fb705fc67
Reviewed-on: https://review.gerrithub.io/391672
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Call this function from spdk_bdev_mgmt_channel_destroy().
Currently there are no real resources to free, but that
will change in an upcoming patch which adds per-thread
bdev_io caches.
While here, also add a for_each_channel iterator to
call this function on each existing channel during bdev
finish code path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9348e37053505c9fba7a6421e55ffc416668d24f
Reviewed-on: https://review.gerrithub.io/392530
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for some upcoming changes which will
add a per-thread bdev_io cache.
While here, remove spdk_bdev_get_io() from the
internal bdev API. This function is not meant
to be called outside of bdev.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f764a88a079fac936931c46d615999454013732
Reviewed-on: https://review.gerrithub.io/392529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
To better match bdev modules like nvme, complete requests
for the bdev/null driver asynchronously. This will be
done by allocating IO channels that register a poller
and keep a TAILQ of bdev IO to be completed next time
the poller runs.
This is actually more efficient as well, since completing
I/O in submit_request context defers the completion using
an event. A benchmark of bdevperf with split running on
top of null module shows this patch increases throughput
20%.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8c664234660c249fd8ec8d9244eed33502d4103e
Reviewed-on: https://review.gerrithub.io/392528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A couple of the lvol tests delete the nvme bdev, then construct
it again to test lvolstore tasting. But constructing the nvme
bdev and then the tasting can take a tiny bit of time, and if
we check for the lvolstore too soon, it could fail. There are
a large number of intermittent test failures in the test pool
that show this signature.
So sleep one second to allow time for the tasting to complete.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iebabe09458302d8300e704f232fdbb245b562268
Reviewed-on: https://review.gerrithub.io/392559
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I366b941a60d1fb00951591e7f631a65e8a449904
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392566
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I102954505c2c53458aae30f6d15b46e008355501
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392565
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Currently the cpumask must be a subset of the reactor mask.
However, this is different from sched_setaffinity() function
and taskset command of FreeBSD and Linux. The latter will
be familier for more people. Hence the later is adopted.
The following is quoted from the FreeBSD Man Page of taskset:
The CPU affinity is represented as a bitmask, with the lowest
order bit corresponding to the first logical CPU and the
highest order bit corresponding to the last logical CPU.
Not all CPUs may exist on a given system but a mask may specify
more CPUs than are present.
A retrieved mask will reflect only the bits that correspond to
CPUs physically on the system.
If an invalid mask is given (i.e., one that corresponds to no
valid CPUs on the current system) an error is returned.
The masks are typically given in hexadecimal.
Change-Id: I7e0d2e029569bfc986f7fcdf78048791ab389f72
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392446
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Load balancing for idle iSCSI connections uses the RTE EAL Launch
state and uses DPDK RTE EAL API.
But all SPDK reactors will exit simultaneously because each SPDK
reactor checks if the global state is RUNNING to exit.
Hence calling rte_eal_get_lcore_state() is not necessary.
When the reactor hot-plug function is supported, this implementation
will be reconsidered together.
Change-Id: I34eaf3e42b5b7deae6473d2bfaf0910aaa9da6de
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391339
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently idle iSCSI connections are managed by the master lcore,
but the master lcore is like BSP of OS and for initialization.
To manage idle iSCSI connections it is important that the core is
consistent.
Hence the first core is better than the master lcore.
In this patch the following are changed together:
- Errors of kqueue() and epoll_create1() are not related with master
lcore. "master lcore" is removed and errno is added into the log.
- In spdk_iscsi_conn_allocate_reactor(), when cpumask is 0, 0 is
selected as core number. 0 is not safe and first_core is used instead.
In spdk_iscsi_conn_allocate_reactor(), when first_core is used instead
of master_lcore, we may observe some contradiction in the following
code. But few changes are done in this patch.
In the current implementation we can assume the first lcore is
equal to the master lcore and the following code will be removed
in the subsequent patch.
/*
* DPDK returns WAIT for the master lcore instead of RUNNING.
* So we always treat the reactor on master core as RUNNING.
*/
if (i == master_lcore) {
state = RUNNING;
} else {
state = rte_eal_get_lcore_state(i);
}
Change-Id: I6cac06c27b289db5ea1f9452e33489286c64d2fa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391338
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
