Here "return rc == -EINPROGRESS ? 0 : rc;"
They are the same meaning in these two functions.
Keep the comments here. This makes more clear to readers.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I8590de3f0fe27337163ee8b02ea63e166f1bbe7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5689
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As log shows
00:06:32.300 [2020-12-18 21:13:35.511014] nvme_ctrlr.c:1414:spdk_nvme_ctrlr_reset: *ERROR*: Controller reinitialization failed.
00:06:32.300 [2020-12-18 21:13:35.511104] nvme_ctrlr.c: 925:nvme_ctrlr_fail: *ERROR*: ctrlr 192.168.100.8 in failed state.
00:06:32.300 [2020-12-18 21:13:35.511132] bdev_nvme.c: 392:_bdev_nvme_reset_complete: *ERROR*: Resetting controller failed.
00:06:32.300 [2020-12-18 21:13:35.511240] nvme_ctrlr.c: 925:nvme_ctrlr_fail: *ERROR*: ctrlr 192.168.100.8 in failed state.
00:06:32.300 [2020-12-18 21:13:35.511511] bdev_nvme.c: 556:bdev_nvme_failover: *NOTICE*: Unable to perform reset, already in progress.
if spdk_nvme_ctrlr_reset() failed, nvme_ctrlr_fail() is called, and
then if spdk_nvme_ctrlr_process_admin_completions() failed,
nvme_ctrlr_fail() is called.
We don't know which one comes first but nvme_ctrlr_fail() should do
nothing if the ctrlr is already failed.
Hence we should avoid setting ctrlr->is_failed and calling
nvme_transport_ctrlr_disconnect_qpair() twice.
However we should set ctrlr->is_removed if the parameter hot_remove is true.
We do these changes in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac37c892e054fb59d78e69346ca7f0575d596235
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5694
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Flag VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP is only used for WRITE
ZEROES command, vhost-blk target may tell VM via 'write_zeroes_may_unmap'
configuration that the backend can support this flag, however, Linux
generic block driver doesn't have such logic, it will enable this
flag by default(without REQ_NOUNMAP) with WRITE ZEROES command,
so the backend may choose to ignore this flag, because WRITE ZEROES
with this flag isn't mandatory.
Fix issue #1714.
Change-Id: Ic9388f39269720a23c00d41cba585d2a5abc3cfb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5565
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
In some extreme use cases, an SPDK process could get
swapped out for a long period of time just after
we checked the state but before we called spdk_get_ticks().
So now we will only timeout if the timer expired before
we checked the state *and* the state did not advance.
It's possible we could just move the timeout check
to before the ctrlr->state switch, but I was
hesitant to change the flow for this case.
Fixes issue #1720.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I95b1db3365b5d2d8a65e528f53c302a724d44460
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5596
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
here we can see that an error rpc response returns.
need to free the rpc nbd start req.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Iebc7cb416c691e8cd48a997f65bff664d9026657
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5635
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
It is possible that STDIN_FILENO is registered as one
interrupt source. So fd_group and spdk_thread should
accept fd whose value is "0".
Change-Id: I96c7e0d6dc1dfa10b42b59aadfa6dc159c133519
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5161
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This member is useless now, all tcp requests
are tracked using state_queue member.
Change-Id: I4771ec163e44202a5d98d356d8935b6e518575ff
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5576
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change prepares for the potential change in spdk-bdev_opts
in the future in order to maintain the ABI compatibility
Change-Id: I8ce24299173854c14c697bf7e28cf365c23f005f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5597
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Per section 5.2 of the NVMe 1.3 spec:
"When the controller posts a completion queue entry for an outstanding
Asynchronous Event Request command and thus reports an asynchronous
event, subsequent events of that event type are automatically masked by
the controller until the host clears that event. An event is cleared by
reading the log page associated with that event using the Get Log Page
command (see section 5.14)."
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I0773ce1b704c2124db354fd19e0a8a19da48da54
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5462
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add support to queue pending async events to avoid event lost if
multiple async events happen when there is no outstanding AER requests.
Pending async events will be consumes in FIFO order once any AER
requests are received.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I545f0baa4ec2996e9e02ec12c176d639e3c0d55a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5117
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit e21de9a9cc.
Reason for revert: The public API spdk_nvmf_qpair_get_listen_trid() was
overlooked when this patch is created. Then the code to use the trid was
replaced by spdk_nvmf_qpair_get_listen_trid(). To avoid someone from using
the trid in future, revert this patch. struct spdk_nvmf_qpair is defined]
in the public header file, nvmf_transport.h but it is mainly for pluggable
custom transport.
Any custom transport will not use the trid, and so even if we remove it,
we will have no issue.
Change-Id: If4656edf3ac68456e758013d487eb582699750aa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5614
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
This reverts commit 9ef1496ba5.
Reason for revert: The public API spdk_nvmf_qpair_get_listen_trid() was
overlooked when this patch is created. Then the code to use the trid was
replaced by spdk_nvmf_qpair_get_listen_trid(). To avoid someone from using
the trid in future, revert this patch. struct spdk_nvmf_qpair is defined]
in the public header file, nvmf_transport.h but it is mainly for pluggable
custom transport.
Any custom transport will not use the trid, and so even if we remove it,
we will have no issue.
Change-Id: I3bf500c27d9d47cc98ee84823b3c098ffcc56d90
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5615
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
All of our Makefiles duplicate huge lists of libraries
in SPDK_LIB_LIST. We have a very precise and accurate
accounting of the library dependencies in
mk/spdk.lib_deps.mk which can be used to generate
the full list if the app specifies the modules and
subsystem libraries it wishes to link.
I did a first pass through all of the existing
Makefiles to take advantage of this new functionality.
There may be more optimizations we can make later but
don't want to hold up this patch for all of them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icdaf6f749a6908df2c2ce2db22631a4af4ff3a9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5553
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the sock belongs to a polling group, we already have the mechanism
to do the write/flush work.
Change-Id: Ic15660717f4e83d873ec9f642ababd7fd9cda5eb
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5442
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When the backend device supports max segments and
max size, we may need to split the IO if the IO segment
size is bigger than max_size or iovcnt is bigger
than max_segments.
Add unit test for span split
Change-Id: If8e9c4f903b7def0ad7ddec7dc5aab8410498db5
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4602
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Delete connection code is scattered all over the place for
different scenarios. For FC-NVME2, we also need to have
ability to delete single connection at runtime. Cleanup delete
connection code and have a signle nvmf_fc_del_connection api that
can be used in all scenarios.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I8d153681fd89dab8c4844b18f29c7e8f7caaa94d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5433
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) Create fc_req pool per fc connection based on SQ size. This gives more flexibity.
2) Remove create_max_aq_conns_test as it is not longer valid. We dont have any limit
on number of AQ connections based on the HW RQ size.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I5c0b0d9ec9e9d63c7dccd76be7d6363a1f49c63e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5432
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
This patch is for packed ring live recovery.
First step is to track the packed ring descs.
This feature base on this QEMU patch:
https://patchwork.kernel.org/patch/11766697/
Change-Id: Id0ccb6fd12b3623cc367424f496b4ffc5323f390
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4126
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to support ABI compatability issue for spdk_app_opts.
Fixes#1484
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6fed777fa15b367f7c3706b8f218d86d56493906
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5330
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
When a device is removed, we should use the remove_cb
that was specified when the device was originally probed
and attached, if one was set.
Also add a new spdk_nvme_ctrlr_set_remove_cb API. This
can be used for cases where a different remove_ctx is
desired than was specified for the probe call. This
also enables setting a remove_cb when using connect APIs
which do not have a way currently to provide a remove_cb.
This also requires fixing the bdev nvme module, which
was depending on the previously errant behavior.
Fixes issue #1715.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id848b39040099ff7a21fe57ea6b194a8c25ae015
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5510
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvmf_subsystem_state_change() protects against going
starting the pause/change/resume chain again if we
haven't completed the previous chain. But add
some asserts to make sure the cb_fn and cb_args
never get set twice. This also requires setting
them back to NULL after they've been used.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56c6c89bfb108223f731d5ac28100abbb746ab2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5531
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We have an intermittent CI failure that hits this
assert. Adding some more detail to help analyze and
root cause.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2174dda58d0ae4d98359a914e5975f8be3e45a89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is used to support ABI compatibility related with
spdk_nvmf_transport_opts structure. We add a field opts_size in
spdk_nvmf_transport_opts and change the related two functions.
Fixes issue: 1485
Change-Id: Ifed3dc482bbc8fb54eb7089f7a1931718682f214
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5293
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
iWARP doesn't support this ibv async event.
Probably some clean up of SRQ needs to be done, e.g.
post dummy drain WR to SRQ and wait for its completion
when qpair is being destroyed.
Change-Id: Ic1035dbd8192e665eedbaf89e5cf4e00cb0506c6
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5474
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The backend device such as virtio-blk or virtio-scsi
may support the SIZE_MAX and SEG_MAX. Then SPDK needs
to split the big IO. Add this feature in bdev.
Change-Id: I2442e14121ccf141682964425e96382fec482af3
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4600
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If ls_pending_queue is not empty, then add the ls_rqst to
ls_pending_queue instead of trying to get xri.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I97e48f30cb6d4fd69548d48e6360275d9f1adec0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5502
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
nport and rport data structures are supposed to be used only
in control path but not datapath. FC data path scaling is based
on connection and connection object contains all the required
information for command processing.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I70f6896955d97abc86bc7c5e6b9f160d622e60d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5501
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Currently we are holding hardware receive command buffer till
the IO is completed. This is effecting the number of commands hardware
can receive. Copy the cmd into driver buffer and release the
hardware receive buffer back to hardware ASAP.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ic292056b3e012d40515d0de5b9808cd8960811ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5430
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today we have two lowlevel LLD apis nvmf_fc_init_q and
spdk_nvmf_fc_init_poller_queues for LLD queue initialisation.
Since two calls are redundant, merge them to one api. Also remove dead
function code nvmf_fc_hwqp_reinit_poller_queues.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ic3df6bff7d38d7b1e946755c3224daf7f6194125
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5444
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use inline code instead of functions when it is used only once.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I5af26f81ac15546dd1e4e4a14753d32f7ee9e1d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5443
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK supports two latest DPDK LTS releases and DPDK 20.11
is out now.
Remove all functionality and checks for versions <= DPDK 19.11.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib4c750c49352fe4ad4b50c7a719867387808f0df
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
__rte_experimental attribute in DPDK ends up being changed to
'deprecated'. See rte_compat.h in DPDK.
Goal of patch below was to allow SPDK to use experimental API
"(b6fce19) env/dpdk: add support for DPDK 18.05 dynamic memory allocation"
Yet it disabled warnings for both. This patch makes it so that
__rte_experimental will not produce warnings, but deprecations in DPDK
will.
It will help identify incoming changes when testing newer versions
of DPDK in the future.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a75e37c976d613c7ec6ee32e05fc6da79a60a1f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5342
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
master_core will still be available but deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6fe9eb7fecb2919795c439a02cb7d9d06a2774d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5358
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This helps us remove master/slave terminology from
SPDK and is aligned with similar changes made recently
in DPDK.
While updating nvme/identify to use the new member
name, also replace g_master_core there with g_main_core.
Other nvme utility usage of "master_core" will be updated
in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0ec4e3e9b644bec21b3729809bf5c4d35b10837f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5351
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These replace the pci-whitelist and pci-blacklist params
which are now deprecated.
pci-blocked will still use the -B short name. pci-allowed
will use a new -A short name.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf1c46c40ad6a0f49fb539b18cdd8d0c8daac636
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The old pci_whitelist/pci_blacklist are now deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9fddec0c90691dd385eb21d13be849247f144889
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5279
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
pci-whitelist and pci-blacklist are deprecated, so
use 'allow' and 'block' instead for DPDK versions that
support it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I430f73fc402ca9fc07d004e719435e5b3dc963f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5278
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some cases we need to check if we are working with
SoftRoCE driver (rxe) since it doesn't support several features
such as SEND_WITH_INVAL and LAST_WQE_REACHED ibv async event.
vendor_id of this driver has been changed from 0 (it was not
initialized at all) to 0XFFFFFF in commit
0184afd15a141d7ce24c32c0d86a1e3ba6bc0eb3
So now we should check for both values.
Change-Id: I62ce4d68c11612a07fe97606658a5b79f1db2149
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5307
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was omitted in 296a6d9838
and is currently causing ABI inconsistencies.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ifb5b2360ff1ffbaffdc3b5d057047d035b98d909
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5368
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is a public API spdk_nvmf_qpair_get_listen_trid() and it can
get trid of the specified qpair safely for any transport including
pluggable transports.
The API was overlooked when implementing the multipath feature for
NVMe-oF target. trid pointer was added to struct spdk_nvmf_qpair and
was used to find a subsystem listener.
However, pluggable transports got seg. fault because trid of the
qpair was not set.
To avoid such segmentation fault for any transport, change
nvmf_ctrlr_create() to use spdk_nvmf_qpair_get_listen_trid().
The struct spdk_nvmf_qpair is located in the public header file,
and so leave the added trid for now. It will be deprecated eventually.
Reported-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e0bd24bd58b6ffdf1352332a179a82682f1589f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5323
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
rdma_disconnect may return an error and set errno to EINVAL in case
of iWARP. This behaviour is expected since iWARP handles disconnect
event other than IB and qpair is already in error state when we
call rdma_disconnect.
Fixes#1704
Change-Id: I38710198d9b6b70b8940947f8e7c553cd4fbbd51
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5314
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently only nvme bdev module implements this interface. Bdev module
context (in this case spdk_nvme_ctrlr opaque handle) allows for nvme
interface usage for additional management.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I6302c9229d5f7f294a3c1472d9e8dc1519637ffb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
